How to drill door lock cylinder - open locked door
HTML-код
- Опубликовано: 29 дек 2020
- Hello everyone,
Once you’re here it must have happened to you that you can’t open the door and now you’re looking at how to do it.
Thanks for watching my video.
In this video, you will learn how to open the door by drilling a cylinder for which you have lost a key or the cylinder is locked.
Use this method if you have no other choice.
Do not call the service because you will save a certain amount of money.
Do this only on your own door or on those doors for which you have permission to do so! 
Хобби
Thank you 😊 done this today after watching your video . Away to purchase new lock now . Thanks again.
Hi,
Thanks for watching.
I'm really glad that I helped you to solve your problem with door.
New lock now fitted , saved me a small fortune 🔑🔑🔑
This is the situation I'm in. My balcony door's exterior lock won't turn. The key is jammed, but I have the right one. I appreciate the video. The technique in the video is what I'll try.
Hi,
Thanks for watching.
Hope you succeeded with this method!
Worked very well. Thank you.
Hi,
Thanks for watching.
I'm glad that I helped you.
Sehr gut gemacht. Ich hatte mein Schlüssel in der Wohnung vergessen und hatte einfach kein Lösung gefunden.Ser gut. 😀
How do u know when to stop drilling for each pin?
Hi, thanks for watching. Depending on what kind of drill you use, it will be so easy for you to break the pins. If you are using a cordless drill that has a gearbox, this is best because it will stop when you drill to the end. Such a drill is also the best to protect your drill bit from cracking.
Am technician I will use adjustable spanner and big flate screwdriver to romove key cylinder Frist use adjustable spanner to break the half cylinder then take of black middle part After that, fit him front the screwdriver and open the door it easy method then drill.
Until u find an antisnap lock then your in trouble
what did you use the file tool for?
Hi,
Thanks for watching.
I'm not sure when did you see file tool?
Can you write time?
It’s not a file it’s a magnetic screw driver. He is pulling out the pins with that
Does this work on all cylinder barrels please?
Hi,
Thanks for watching.
I'm not sure that I understand what do you mean by cylinder barrels.
What kind of drill bit
Hi,
Thanks for watching.
You can use regular HSS drill bit ( 6mm).
Only be careful with speed, because you can broken drill bit if you fast dip far.
Hi I drilled through all 5 bits but the key hole is not turning like in the video. Any reason why ?
Hi,
Try to put any key inside and try to turn in clock direction.
Or there is something stuck inside.
But you must to succeed with this method.
Geezer needs to learn how to use torque settings and how to tightening the chuck 😂
If celender fell inside then we can open or not
Hi,
Thanks for watching.
Where dou you mean cilindar fall inside?
Did you use to big drill bit?
I have tried this the barrel just spins, the handle does not unlocked??
Hi,
Thanks for watching.
Try to put any key inside and try to turn in clock direction.
Or there is something stuck inside.
But you must to succeed with this method.
Maybe with a little punch with hammer will help ...
I have same problem, key just spins not engaging the lock at all so unable to get to the long screw holding the lock in, any ideas? Thanks
@@biggy69beanlicker99 call a locksmith
@@maddythesassy Lol Ive got more sense than to pay someone something I have no idea how to fix!
Rule 1 in saving money ££££
I sorted it in 2 minutes, snapped the barrel with pair of mole grips, poked a small screwdriver to get the round piece that turns the lock to open and beautiful, job done!
But i did learn something, I had installed anti snap locks previously but I had installed them the wrong way lol.
Antisnap locks are designed with a weak point that prevents the main mechanisms from being damaged easily when force is used, instal them the correct way, the shorter end before you see the gap in the bottom is installed towards outside 😜
What if you drill to far and it won't open?
Hi,
Thanks for watching.
Try with any key what you have and fit in lock, turn it full to right then full to left.
After that you will be able to open it.
And how can we avoid drilling it too far? I have a cylinder lock whose keys I lost. The door isn't locked, but I want to replace the cylinder, and it is the first time for me to have that kind of trouble, so I would be grateful if you answered me. I dare not try snapping the cylinder, because my door is kind of fragile and I would not like to damage it in that way so I thought of drilling.
@@urosurosevic5184 mate whatever you do MAKE SURE you only take "5" pins out
@@urosurosevic5184 I snapped the cylinder in the end lol
@@passenger3 Thanks for your answer. Was it successful, did you damage the door or the main lock? I think I'll eventually ask someone to snap it for me.