I think this is the first video of yours that I watched it's very well explained I got the same car and I have the same issue with the air conditioner I was about to change the AC compressor but I think I'm going to check the connections first thanks a lot for this information .
How you Deo this is Pepe again like I mentioned the last time I have the same car 2007 Sebring I having the same problem I have a ob2 reader and I checked up didn't appear any codes I checked up the pressure sensor too it looks like it's in good condition and it is connected properly the compressor looks like like is working well the system has freon my friend has the machine that vacuum the system didn't loose pression there is no leaks but someone told me that the compressor may look like is working but if it is not working 100%. It won't be pumping cold air so what do you think should I replace the compressor? Thank you!!.
my first check under the hood would have been start car turn on a/c and see if the compressor is turning. if not would check to see if compressor is locked up then check fuse to see if compressor fuse is blown. saves a lot of time. then if all that checked good would have then checked freon
Nice machine looks expensive though. 2004 Mercedes Benz hash back kicked my but,it doesn't have power, displaying an F on crank position and no fault codes🤣🤣. It starts sometimes boom no throttle.
Abu Conteh I think you have to read a lot of books and you have to go to as many training classes as possible, then be patient eventually everything will work out, as long as you implement the things you are learning!
Same thing happened to mine but the main relay starting clicking when the car is off. Would this be connected in any way? I replaced the relay but it still clicks when I shut the car off. If I tap the air filter housing it will stop.
@@KITS_Auto_and_Truck_Repair it is the cable that runs in-between the air cabin filter and the manifold. Its either pinched or a broken wire in it. I had that gasket replaced not long ago. Dunno if it got pinched in the process or what. Explains why when tapping the housing to the air filter that it would stop. I took it to a different guy who knows auto electric. He found the prob in just a few minutes. Saved me from having someone replace a lot of unnecessary things.
Fantastic! All the details in a straightforward analysis of the problem. Thank You!
@daveduback7974 My Pleasure! Thanks
Man I stumbled on your videos and your diagnostic skills are second to none. Great content 👍
Marion Oliver Thank you!! Welcome to our RUclips Community!
This technician 👨🏾🔧 is an artist, Repairs like these takes some serious talent!
Good job, K diagnostics… thanks for showing us how it’s done ✅
DinhaS Thank you!! I appreciate it!
New subscriber. Thank you!
Very good job, you are the one who go in details, to get his viewers fully informed about the fault code and how to fix it , thanks
Mohammad Al-Gebaly My pleasure!!
Another complete diagnostic video... Great diagnosis and repair..... Love it
Doug Pfaltzgraff Thank you!!
Excellent work! Very nice equipment as well 😎👍
@fredm2786 Thank you!
💯 great and fantastic video, this is my favourite part,K Diagnostic thank you and this costumer deserve to pay extra for doing this.
Suleman Habib Lol! Thank you! My Brother, I appreciate you!
I think this is the first video of yours that I watched it's very well explained I got the same car and I have the same issue with the air conditioner I was about to change the AC compressor but I think I'm going to check the connections first thanks a lot for this information .
pepe luke My Pleasure! I'm glad to hear that the video was helpful!
How you Deo this is Pepe again like I mentioned the last time I have the same car 2007 Sebring I having the same problem I have a ob2 reader and I checked up didn't appear any codes I checked up the pressure sensor too it looks like it's in good condition and it is connected properly the compressor looks like like is working well the system has freon my friend has the machine that vacuum the system didn't loose pression there is no leaks but someone told me that the compressor may look like is working but if it is not working 100%. It won't be pumping cold air so what do you think should I replace the compressor? Thank you!!.
Once again,how the gateway module operates. I'm kinda curious, sorry I'm still new in the industry and learning a lot from yu guys thanks
Dumisani Tembani Mtisi A Gateway module is like a translator for all the modules on the vehicle!
my first check under the hood would have been start car turn on a/c and see if the compressor is turning. if not would check to see if compressor is locked up then check fuse to see if compressor fuse is blown. saves a lot of time. then if all that checked good would have then checked freon
Dependable Auto Truck Thanks for your suggestion!
Hello, wondering if you have to evacuate the ac system prior to replacing the ac pressure transducer sensor on a 07 Chrysler 300 2.7 Thanks
Froylan Miranda no you don't need to recover the refrigerant to replace the pressure switch!
Fantastic diagnosis
Engineer Hussien Thank you!!
thANKS YOU
@essamsabbah4016 My Pleasure!
Mon frère du cœur tu as trop de la valeur...
parfait Nzedi Merci mon frere du Coeur! mon ami Piment, mon frere!!
2007 Chrysler 300 2.7 put an r&y ac compressor and still ac not working
@froy204 make sure you have enough refrigerant in the system and there is power at the AC compressor!
I comment as I am watching
Ivan Peterzell Thank you! I appreciate you!
Nice machine looks expensive though. 2004 Mercedes Benz hash back kicked my but,it doesn't have power, displaying an F on crank position and no fault codes🤣🤣. It starts sometimes boom no throttle.
Dumisani Tembani Mtisi Thank you!! Did you check your crank sensor with a Labscope!!
Will check that,thanks.
thanks. !!
Pierre Bochamp My Pleasure!!
I need help I'm getting code p0533 I changed out the sensor still nothing
@jamiecumbee4108 the sensor wiring could be bad!
Nice work!!!!
Dimitri Berozny Thank you!
I want to know from you what is the secret to become a good technician in this field of work
Abu Conteh I think you have to read a lot of books and you have to go to as many training classes as possible, then be patient eventually everything will work out, as long as you implement the things you are learning!
Same thing happened to mine but the main relay starting clicking when the car is off. Would this be connected in any way? I replaced the relay but it still clicks when I shut the car off. If I tap the air filter housing it will stop.
@trudydomson2255 you might have a shorted component or a short somewhere in the wiring!
@@KITS_Auto_and_Truck_Repair it threw an Oxygen Sensor Heater code yesterday. Hoping that the connection. Dunno
@@trudydomson2255 Ok!
@@KITS_Auto_and_Truck_Repair it is the cable that runs in-between the air cabin filter and the manifold. Its either pinched or a broken wire in it. I had that gasket replaced not long ago. Dunno if it got pinched in the process or what. Explains why when tapping the housing to the air filter that it would stop. I took it to a different guy who knows auto electric. He found the prob in just a few minutes. Saved me from having someone replace a lot of unnecessary things.
@@trudydomson2255 I'm glad to hear that your vehicle is fixed!
very good process like your videos.
Ruben Herrera Thank you!!
Thx once again
Highest Forward Gear My Pleasure!!
😅❤ nice boss
@user-dz4jb5rg6k Thank you!
Seemed overcharged from what you taught me
Ivan Peterzell Yeah! it was a bit overcharged!
Grasias
Martin Arrieta My Pleasure!!
100%
Crystal Thanks!
No entendi ni madres
@laloleal291 English please!
@@KITS_Auto_and_Truck_Repair no inglés :/