Thank you all for watching the video, don't forget to like it. By the way, one of the subscribers told us the idea of making a chisel knife. Therefore, write in the comments which knife will make the next one, and we will make it for you.
It’s so refreshing to see someone center punching a knife on an anvil rather than a surface plate. This kind of craftsmanship and respect of equipment shows on the incredible beauty and creativity of your beautiful knives.
I have been a big fan of you for a long time! you were one of my biggest inspirations to start making youtube videos and make knives! I must say this has been one of my favorite videos by you yet! Great job!
Always enjoy the beginning with the metal in the Crucible and what comes out it's quite amazing how hard it is when you hammer it, what you forged out is quite something then you fit and finish it and it's beautiful pice of work. Always good to see another new video from you knowing you are keeping well.
To explain deeper, the glass melts and forms a seal on top of the steel while the Carburization takes place, because if Oxygen gets in, it will bond with both the Carbon and with the Iron and it will ruin it all into a gassy pile of rust.
I think he uses 1095 for the steel powder, but could be a lower carbon steel. Then he adds graphite for additional carbon, then the glass to prevent oxidation.
Hey bud well I just saw on the chisel knife video awesome as hell. Question what was that liquid that made the knife kinda look etched afterwards the liquid that looked deep orange color just wondering I seen u that before on another video with the Shirasaya Katana and it looked awesome
Привет из Киева! Скажи пожалуйста когда засунул лезвие порубленное в тегелёк, добавляешь Я так понял битое стекло а что за два порошка? Одного много другого поменьше? Если это не секретные ингредиенты)) спс
Обычно порошковая сталь используется в качестве наполнителя, здесь же она заняла более 50% объема тигля. И смысла делать обычный недорогой инструмент из инструментальной стали, используя ручной труд и дорогие компоненты, типа наборных штифтов, особо нет. А так - красиво, ничего не скажешь.
![Старейшая нерешённая задача [Veritasium]](http://i.ytimg.com/vi/FuRem6-sTmQ/mqdefault.jpg)
Thank you all for watching the video, don't forget to like it. By the way, one of the subscribers told us the idea of making a chisel knife. Therefore, write in the comments which knife will make the next one, and we will make it for you.
I think you might be talking about my comment awhile back. So happy you made a Chisel knife it turned out amazing!
How about a shuriken? That could be a real challenge! 😊
It’s so refreshing to see someone center punching a knife on an anvil rather than a surface plate. This kind of craftsmanship and respect of equipment shows on the incredible beauty and creativity of your beautiful knives.
Thanks
finally somebody that uses the bandsaws instead of throwing them away as soon as they chip
I have been a big fan of you for a long time! you were one of my biggest inspirations to start making youtube videos and make knives! I must say this has been one of my favorite videos by you yet! Great job!
Great work, thank you for sharing 👍👍
As always you are the best-experienced knife maker ever in the world💯
Oh my God!! Thank you bro perfect timing 👌 🙏 🙌
Hello FZ beautiful knife Beautifully made well done
THAT is craftsmanship!
Amazing looking steel that is satisfying you just to watch how it was made.
Pure love ❤
Very Very nice tool. To be honest I've never seen a bad blade you've ever built. Love your work.
thanks for huckin that fireball. made my day
Merci pour cette première partie de la réalisation de cet outil.🙏👍
Sharp and practical very unique 😺
This was fantastic and I really appreciate the mosaic flower pins.
Amazing work as always!
Thanks 🤝
Always enjoy the beginning with the metal in the Crucible and what comes out it's quite amazing how hard it is when you hammer it, what you forged out is quite something then you fit and finish it and it's beautiful pice of work.
Always good to see another new video from you knowing you are keeping well.
I love that you got your wood cut at the end 😆
It's amazing how you turn trash into new, beautiful too
your creations are always masterpieces
It's always a pleasure to see all your steps on thru the blade making. The best. 🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤
Thanks 🤝
Beautiful work as usual! That thing has incredible cutting ability.
Very nice Jihada! 👍
great work again !
Thanks
I’d love to see a Japanese style 8” chefs knife with light wood handle. Love your videos
- Подивитися процес виготовлення найдорожчої стамески у світі, зробленої на відстані 1 км від мого дому - done :)
Дякую, земляки! :)
Great job, thanks for sharing!
Thanks
Wonder what he does with all the leftover material. I'd like to see a blade made out of those. Just the patter would be amazing.
Out of space and time. Chapeau.
Good job 👏👍
Thanks
As always, a work of art)
Thanks
Great tool!!!👍👍👍
Thanks
awesome chisel knife
Amazing making process bro
Кузнец с большой буквы!, спасибо за видео! Вдохновений и здоровья желаю вам!✊
Good job!🙂👍
Thanks
Поражаюсь просто з ваших робіт😳👍👍👍🇺🇦
Nice!
Caramba gostei belo trabalho
Wouldn't you want the bevel on the opposite side of the knife for a right handed user?
I had the same thought. That's a left handed knife
If you look at Yakut knives, they seem to be the same way. Seems counterintuitive.
Beautiful! I wonder about the utility? Is it meant for wood wook/carving or does it have other uses?
Maybe make a karambit out of san mai, with the cladding steel being cutoff ends from past builds.
Does anyone know why he puts the glass shards in last?
Beautiful work, as always!
To protect steel from oxidation.
👍
@@fz-makingknives3663Ahhh, makes sense. Thank you!
To explain deeper, the glass melts and forms a seal on top of the steel while the Carburization takes place, because if Oxygen gets in, it will bond with both the Carbon and with the Iron and it will ruin it all into a gassy pile of rust.
Very nice piece of work there. I'm not sure what steel bandsaw blades are made of. Or even if the bulk of the blade and the teeth are the same metal.
Cool 💪👍
👍
if you're right handed, better put the bevel on other side, so you dont hurt left hand when using both
gj btw
Cool
I finally got the joke at the end of the video. 😂😂. Too funny
👍Good
Щикарно
That intro through me off and I was like Oh Yeah. lol
is that a special type of glass?
Для подобной работы изобретен рубанок, еще в период мезозоя 😏
👍👍👍
Second life of steel
Can I used peanut oil for quenching
Absolutely. Plenty of smiths do.
do you have the formula for the filler metal or is that a secret 1:20
I think he uses 1095 for the steel powder, but could be a lower carbon steel. Then he adds graphite for additional carbon, then the glass to prevent oxidation.
You can buy powdered sreel in 1084 and 1095; probably other grades too.
смотрю уже второе видео, захватывающая работа!)
Подскажите. пожалуйста, кристаллы, которые вы используете, что это?
Hey bud well I just saw on the chisel knife video awesome as hell. Question what was that liquid that made the knife kinda look etched afterwards the liquid that looked deep orange color just wondering I seen u that before on another video with the Shirasaya Katana and it looked awesome
❤❤❤❤❤❤🎉
Why quench before sharpening???
How about either a butterfly knife with an all Damascus body or a blacksmith’s knife with the whole skeleton handle and forged from 1 piece?
👏👏👏👏👏🤜🤛
For a push blade, it probably would've been safer to either put a guard or a hand stop on that so you can't mangle your hands as easily, no?
Could you please do a 15th century style dagger?!?! Your work is so beautiful, and I know you would do an amazing job!
Привет из Киева! Скажи пожалуйста когда засунул лезвие порубленное в тегелёк, добавляешь Я так понял битое стекло а что за два порошка? Одного много другого поменьше? Если это не секретные ингредиенты)) спс
How about some Wootz using old keys?
Класний ножик
Could you please add the proper amount of Vanadium?
Another beautiful blade. Need to do a Rambo style knife .
А в двигателе макити есть медь, можно сломать и плавить.
Can I use some clips from your videos?
Make an wootz Ulu knife, that you can use for cutting meat and combat, so no wider than average witdh of a fist.
Make a fish filet knife next
Обычно порошковая сталь используется в качестве наполнителя, здесь же она заняла более 50% объема тигля. И смысла делать обычный недорогой инструмент из инструментальной стали, используя ручной труд и дорогие компоненты, типа наборных штифтов, особо нет. А так - красиво, ничего не скажешь.
Would also love to see you make two hand Scottish claymore
Ayo buat rencong, senjata tradisional ACEH
Id say thats a weird looking chisel
You can tell chisels aren’t your specialty Lol turned out good tho.
Knife do samurai sword
Браво! Справжня стамеска для справжнього самурая..)
Пресу прийшлось попотіти, щоб розкатати на стільки круто замішане тісто..)
Цікавий виріб!!!
😘 Promo-SM
it's very nice, but impractical af,, no offence
👍👍👍