People tend to forget that the PRIMARY purpose of springlock suits were to push back an animatronic endoskeleton inside the animatronic suit to make space for a person to wear the suit. The impaling, stabbing & shredding of your body was NEVER intended, and thus should NOT be put into the equation.
@@Solidslicer Yeah, and I wonder how William got past the OSHA regulations. There's NO WAY they would've let Afton Robotics mass-produce springlock suits. Which probably explains why there's so few (only Fredbear, SpringBonnie, presumably Baby or Ella, and those springlock Freddy, Bonnie & Chica from some concept art)
"Sure that youu did't want to kill any kids and then when their spirits come to hunt you then you would have wear that thing and then die and become an undead furry?" @@conigonde
The fact that Henry decided to make iron maden suits that thrust parts INWARDS onto the endoskeleton instead of spiky endoskeletons with parts that extend OUTWARDS towards the suit should've been a sign to William that he should've found some other engineers Though I'm sure William would come to appreciate those deadly suits later, at least until he went back to the original location years later and wore that one spring bonnie suit
it's cheaper as far as the bottom line is concerned to only have one type of endoskeleton from a manufacturing standpoint and from a maintenance training standpoint
@@mysteriousstranger5873 im certainly not saying a springlock suit was the best idea im just saying that if a springlock suit was to be designed its cheaper to just use the endos you already have rather than designing a new endo for specifically just that suit
Theres literally nothing in the lore stating that they were going for a small and robust size, the only thing mentioned is just a suit that can be worn and be and animatronic
@@VJArt_ Yeah but the design they ended up with is small and robust. Downloadcont had to set and hit every springlock individually, whereas the animatronic suits had a crank that would adjust each of them at once and people irl have been spending a long time trying to figure out how that mechanism works. And the design needs to be small in order to allow for a human to go inside the suit. So yeah, I would at least say that size and robustness weren’t off the table.
@@henrysanecdotes5323 i'd say a cable and pulley system would be good for it because its small and robust, and all the force to pull back the springs can be applied in 1 place, aka at the crank. There would be a ratcheting mechanism at the crank hub so you can stop putting force on it and take the crank off. The ratchet could be off like a harbor freight torque wrench or something tho so it would be the failure point for all the springlocks
oh no no no it was MUCH more brutal, in this a thew spikes were stabbed into him but what really happened was that, and his skeleton being replaced with a metal skeleton, his eyes being forced out by the suit, and a metal piece being shoved into his brain lol
The production value and quality of the writing in this video isn't lost on me or taken for granted. Goddamn man, this shit is so good. Good shit, bro. Keep that grind up.
I don't know what I was expecting, but I love how this is purely a death suit. It serves no purpose other than to potentially impale you which is hilarious
I mean it *kinda* works as intended Like you *could* slip into this as feasible animatronic, but it is purposely designed to cause death, unlike the real suit (which wasn’t). So it’s not totally off
@@Lylaris_or_Garuk For sure. The springlocks just aren't holding back any functional parts. It would be like making an animatronic with hollow parts for a person to fit in, and then adding spike traps in those parts just for fun. That was my thinking
Springlocks suit is not used for just people wearing it, it's also used for the endoskeleton of the suit as it locks the endoskeleton in the suit to attach both the Endo and the suit itself
@@ace7810 yup the death trap was pretty much accidental and on purpose at the same time Idk how no one recognized how bad the springlock suits are but hey idk Psychopaths make there owns monsters but they also make there own death traps specifically the one in fnaf He made his own monsters and then made his own death trap
If these spring locks can’t snap shut while I’m in a suit and kill me slowly from internal bleeding, punctured lungs, and organ failure, well then I say no deal! Seriously, this is an absolutely incredible build.
i like how the point of every single fnaf game is "DO NOT DO ANYTHING OF THIS IN REAL LIFE PLEASE" and this fella just had the balls to say *"nah im gonna do it anyway"*
*He-hey! Glad you came back for another night! I promise, it'll be a LOT more interesting this time! We found som-some great new relics over the weekend, and were out tracking down a new lead RIGHT NOW! So, uhh- let me just update you real quick, then you can get to work. Like, the attraction opens in like a week, so we have to make sure EVERYTHING works, and nothing catches on fire! Uhm, when the place opens, people will come in at the opposite end of the building, and works their towards you, and PASS you, and out the exit. Uh, yeah you've officially become part of the attraction. Uh, you'll be starring as... The Security Guard! So not only will you be monitoring the people on the camera as they pass through, you know, to make sure no one STEALS anything or, (makes out?) at the corner, but you'll also be a part of the show! It'll make it feel, really authentic I think. Uh, now let me tell you about what's new. We found another set of drawings, always nice, AND A FOXY HEAD! Which we think could be authentic! Then again, it might just be another crappy cosplay. And we found a Desk fan, very old school, metal though, so watch the fingers! Uh, heh! Uhm, right now the place is basically just, you know, FLASHING LIGHTS and SPOOKY PROPS. I honestly thought we'd have more by now, uh so if we don't have anything really cool by next week, we may have to suit you up in a (Freddy/Furry?) suit, and make you walk around saying: "BOOO!" Hehe. Uh, but you know like I said, were trying to track down, a good lead right now. Uh, some guy who helped design one of the buildings, said there was like, an extra room that got boarded up..? Or something like that. So! Were gonna take a peak, and see what we can find. Uh, for now just get comfortable with the new setup. You can check the security cameras over on your right, with a click of that blue button. Uh, you can toggle between the Hall cams and the Vent cams. Uh, then over on your far left, you can flip up your maintenance panel. You know, use this to reboot any systems that may go offline. Uh, in trying to make the place feel more vintage we have overdone it a bit! Heh heh. Some of this equipment is BARELY functional! Uh, I wasn't joking about the fire, that- that's a real risk. Uhm, but the MOST IMPORTANT THING, you have to watch for, is the Ventilation. Look, this place will give you the spooks man, and if you let that ventilation go offline, then you'll start seeing some craaazy stuff man, keep that air blowing! Ok, keep an eye on things, and we'll try to have something new for ya' tomorrow night."*
@@Namelessman.guy2less expensive than what? Buying costumes of your animatronics? They arent just costumes they are indo folding animatronics so there is ni way they are cheaper
Actually the fact that the legs don't activate is realistic, because in the games when William Afton gets springlocked the springlocks for the legs don't activate for some reason. So great job 👍
@@V1DE0-STARZ probably because he was able to kneel (kneel? kneal? idk) down when the springlocks were failing (or he kneeld because he flinched from the springlocks he lost balance) or because he was able to move himself to sit against a wall for 30 years
Hey! So this is pretty good tho I have a lot of things to suggest. First off, due to the stunning size of the springlock, you're having the casing be way too big to be inside an animatronic. And of course, the rod extends outward the casing, sticking out in a very unaesthetic way. I would reccomend putting the springlock laterally and using a lever mechanism attached to the springlock so that it can lower the radius of your arm, and of course prevent the sprtinglock from spoiling the costume's look. The ribcages are great but not 'funtional', and of couse the rest is pretty awesome !
There is one very simple design method to make the springlock suits not deadly. Make it to where the suit mode was the default and then crank the animatronic parts into the middle to become an animatronic. A malfunction will cause the robot to go limp and the suit is completely safe. Awesome and entertaining video by the way, keep up the good work.
Kinda stupid thought, but I'd like to believe Henry and William thought of this exact scenario and showed it to investors... Only for the conversation to go like this: I - So... What if they fail on stage? Wouldn't that ruin immersion? H - I mean... Maybe? I - So you should invert the default stage to animatronic mode. W - Sir, people could die. Those springlocks are no joke. I - You're doing this for the immersion either way! Maybe you could just make a safe room so any potential victims just go there to get treated or something, and pretend the characters just, idk, went to the bathroom. H - ... WHAT. W - This is f**Ked up. I - It's either that, or no investment money for you. You can decide. H - ... Fine. We'll at least put some safety training tapes for the employees. W - ... This is definitely not gonna sit well with OSHA.
Literally "we created the Torment Nexus from the hit scifi novel Don't Create the Torment Nexus" all FNAF media says springlock suits were a bad idea that Fazbear entertainment had
Imagine You’re a nurse or doctor and someone comes in needing emergency medical attention and you go into the surgery room and find springtrap laying on the table (it’s this guy) 😭💀
Pulling the plug ain’t gonna do nothing once he goes flat he’ll sit up and threaten you for doing it then plug it back in to pretend he dies and doesn’t have to come back 😭
Looks great! Just as long as nobody actually wears that, holy crow! How did Henry and William ever think this was a good idea?? Like.. I imagine them testing the springlocks to see how well it works and them just being like “hm, seems legit” and then casually wearing the suits to entertain kids on stage somehow
@@pdd5793 haha, I imagine it being Williams idea first and he’s like “I haven’t slept in 36 hours!! And I have created the most revolutionary invention yet!!!” And then Henry takes a hard look at every liability risk and is like “shut up and take my money” and then that’s how the suits came to be
Actually the springlocks worked really well. But the spring bonnie suit was old and had water damage, so when William got in it, the moisture from his breath, his sweat and the water dripping set it off since it was so old.
I love how you have successfully recreated the horribly dangerous and unintended aspects of this contraptions without it having even the tiniest shred of actual function. Kudos.
I swear someone is actually gonna end up killing themselves from attempting to make spring lock suits too accurate😭 On a side note these make good saw traps👍
yeah and someone will probably murder 5 kids in a pizzeria and then get springlocked in the suit after the ghost of the kids corner him into the suit and then end up being a reanimated corpse possessing the suit
That’s one of the best replications of a spring lawsuit that I’ve ever seen even the spring locks suits from from the movie there’s still like they’re made of plastic so like that’s the best representation I’ve ever seen
Really cool video!! This death trap works VERY nicely as a proof-of-concept! And I'm totally fine with you not using actual ballistics gel lol-I was still impressed by what it looked like with the mannequin parts and the bottles! Honestly, I'm glad you took it that route-imagine how underwhelming it would've been if the springlocks couldn't actually get deep enough to draw blood! For something like this, I'll sacrifice realism for spectacle any day! If you ever decide to expand this design to create a full-body springlock suit AND failure, that would be AMAZING, but imo that would only take this 9/10 video to a 10/10!
LETS GOO!!!!! YOU KEPT YOUR PROMISE!!! DUDE this is SO SICK! and I just love how informative this video is, but funny at the same time. :quotes: 0:40 - "so instead of using the 44 pounds, *throws at max capacity*-" 1:31 - *while beating steel rings against the ground* "so i went back to making springlock arm attachments." 1:38 - "now this, is a metal pipe." 2:11 - "it was able to hold on to this mannequin arm, so I imagine it would do something more terrible to . . . you know. . . . a human arm?" 2:41 - "so when i was building the springlock chest area, the breast area, the.. the chest breast area on the springlo-"
Dude, I almost screamed after reading the title. 😭 That's how excited I am for this thing. Also I really appreciate that you used a Ballistic Gelatin to test it on. You're crazy but I love you for it, man. ❤❤ Keep up the good work without hurting yourself in the process, please. 😊
We have people making working animatronics, and people making working springlock mechanisms. Multiple on both counts actually. We need a collab to get the concept working together as described in FNAF 3. I wanna see a functioning Endoskeleton(not even one of those fancy walking around ones that one guy made per say , just like a standard wave and sing and talk on the stage type one: sure the ones in FNAF 3's tapes could walk , but ones in FNAF 4 didn't do that in animatronic mode.) be compressed into a suit and a person climb inside with said endoskeleton in it(probably with some sort of extra safety for that part). That's the entire point of them, maintain the illusion by having the exact same suit for both. Freddy completes his stage show, curtain closes, a minute later he's standing on the same spot on the stage(stains and all) but after a few seconds of waving turns to walk down to say hi to the kids, non the wiser now there's a person using it.
People tend to forget that the PRIMARY purpose of springlock suits were to push back an animatronic endoskeleton inside the animatronic suit to make space for a person to wear the suit. The impaling, stabbing & shredding of your body was NEVER intended, and thus should NOT be put into the equation.
While I absolutely agree... Funny stab suit go BRRRRR
@@Solidslicer
Yeah, and I wonder how William got past the OSHA regulations. There's NO WAY they would've let Afton Robotics mass-produce springlock suits. Which probably explains why there's so few (only Fredbear, SpringBonnie, presumably Baby or Ella, and those springlock Freddy, Bonnie & Chica from some concept art)
@@venomfan2020
Money and corruption baby.
No one complains as long as everyone has a taste of that moolah.
i think that the animatronic parts are sepreate and the springlocks hold the parts in place
are you kidding? thats the most fun part 😁
imagine the police searching his house just to found a somewhat torture device strapped to a mannequin with fake blood coming from it would be funny
that would be hard to explain
"Your honor, it was for a youtube video."
"Sure that youu did't want to kill any kids and then when their spirits come to hunt you then you would have wear that thing and then die and become an undead furry?" @@conigonde
@@thematthew83s_kleccondrake "Uhm.. Your honor do you have cameras in my house because that exactly happened 😳."
Noice @@Kickinbabiescuswhynot
The fact that Henry decided to make iron maden suits that thrust parts INWARDS onto the endoskeleton instead of spiky endoskeletons with parts that extend OUTWARDS towards the suit should've been a sign to William that he should've found some other engineers
Though I'm sure William would come to appreciate those deadly suits later, at least until he went back to the original location years later and wore that one spring bonnie suit
Henry was the engineer and my head cannon is that William wore the suit because of his ego
it's cheaper as far as the bottom line is concerned to only have one type of endoskeleton from a manufacturing standpoint and from a maintenance training standpoint
@@allenbeiter2281considering all the moving parts… no, no it wouldn’t be cheaper. It doesn’t take that much to make a cloth costume bruh
imaging with that system the animatronics get springe locked. That would traumatize the children.
@@mysteriousstranger5873 im certainly not saying a springlock suit was the best idea im just saying that if a springlock suit was to be designed its cheaper to just use the endos you already have rather than designing a new endo for specifically just that suit
I was thinking "Oh, so he made like a robot that you can wear as a suit?"
I thought wrong
He made more of the skeleton
Imagine if Iron Man got springlocked lol
@@ob2kenobi388iron trap
Imagine just causully buliding a literal saw trap in his house
lol fr
The fact that he had the balls of absolute titanium to put his arm in a cocked springtrap is actually crazy
I never get any credit
@@TheREALManBehindTheSlaughterNo the, you killed 5 kids
@@ErickAvila-z2y sssshhhhh
@@TheREALManBehindTheSlaughter congrats on killing 5 children
care to rephrase that?
I love how william afton and henry are going for small size and robustness and function and download’s like “so we’re gonna go for damage here”
Theres literally nothing in the lore stating that they were going for a small and robust size, the only thing mentioned is just a suit that can be worn and be and animatronic
@@VJArt_ Yeah but the design they ended up with is small and robust. Downloadcont had to set and hit every springlock individually, whereas the animatronic suits had a crank that would adjust each of them at once and people irl have been spending a long time trying to figure out how that mechanism works. And the design needs to be small in order to allow for a human to go inside the suit. So yeah, I would at least say that size and robustness weren’t off the table.
@@henrysanecdotes5323 i'd say a cable and pulley system would be good for it because its small and robust, and all the force to pull back the springs can be applied in 1 place, aka at the crank. There would be a ratcheting mechanism at the crank hub so you can stop putting force on it and take the crank off. The ratchet could be off like a harbor freight torque wrench or something tho so it would be the failure point for all the springlocks
Being still an accurate of a real life springlock really shows how fucking brutal William Afton's death was
"death"
“I always coem 🤑🤑🤑 back
Add a timer some more bits and it’s a saw trap
oh no no no it was MUCH more brutal, in this a thew spikes were stabbed into him but what really happened was that, and his skeleton being replaced with a metal skeleton, his eyes being forced out by the suit, and a metal piece being shoved into his brain lol
Deserved.
It really is a sick can opener!
Random verified yter coming months late
i always cone vck
robby make this since you already have the head
and also person opener
The fact that i read this at the exact part of the the vid where he says "a pretty cool can openner" is wild
Henry: **slaps top of springtrap** "this bad boy can open so many cans!"
Afton: "..."
LMFAO HE'S SO ANNOYED
@@AXYERI think he's dead
@@ACuteLilUFOhe always comes back
And dies again @@mariox204
@Elite_Tvman33 and then that cycle repeats
"the design is very human"
Ah yes
Yo, what day he'll lol
Yes
. that's all I'm gonna say.
Wait no fake springlocks is real
The production value and quality of the writing in this video isn't lost on me or taken for granted. Goddamn man, this shit is so good. Good shit, bro. Keep that grind up.
kinda bold for someone who hasn't even gotten through halfway through the video yet but y'know, whatever
@@T0asterStrudeIwhat?
@@Qikxnothing, nothing. just speepin' nonsense for nonsense sakes
This sh## is soo good
@@T0asterStrudeI ???
There is literally an entire game franchise, multiple book series and movie on why this is a bad idea
Oh hey I know you, I love your videos
@@SomebodyRandom16 I think you’re mistaken, I have no videos on my channel and there never have been videos on it. I do comment a lot though.
Omori profile🙂
Now he just gotta open a restaurant! I am sure everything will be fine
@@cheeseryts maybe even a pizzaplex
0:27 I thought he meant he was bringing the suit to a retirement home for elderly people to try it on. 💀
💀
🎶 It's been so long~ Since I last have seen my grandfather~🎶
🫡
🫡💀👏🏼
I bet that retirement home got william afton......
Don't let this guy near 5 children
Edit: Holy macaroni. Was not expecting those replies. Btw, 6 children is fine, in fact, any other number is fine.
Don’t let this guy have 3 kids
Don't let this guy make a pizzeria franchise
Don't let this guy put his brain into a computer
Don't let this guy make vr games and have play testers
Dont let this guy near his business partner's daughter
I don't know what I was expecting, but I love how this is purely a death suit. It serves no purpose other than to potentially impale you which is hilarious
I mean it *kinda* works as intended
Like you *could* slip into this as feasible animatronic, but it is purposely designed to cause death, unlike the real suit (which wasn’t). So it’s not totally off
@@Lylaris_or_Garuk For sure. The springlocks just aren't holding back any functional parts. It would be like making an animatronic with hollow parts for a person to fit in, and then adding spike traps in those parts just for fun. That was my thinking
@@foncess that sounds awesome
Springlocks suit is not used for just people wearing it, it's also used for the endoskeleton of the suit as it locks the endoskeleton in the suit to attach both the Endo and the suit itself
@@ace7810 yup the death trap was pretty much accidental and on purpose at the same time
Idk how no one recognized how bad the springlock suits are but hey idk
Psychopaths make there owns monsters but they also make there own death traps specifically the one in fnaf
He made his own monsters and then made his own death trap
Someone finally built the springlock suit from the series "Don't build a springlock suit!" Truly nothing could ever go wrong
The fact his actively trying to make his springlocks more dangerous by upgrading the springs is wild
and the locks
william's thought process be like "ah yes perfect, it ALMOST cant kill me"
oh shit its the "MICHAEL, DON'T LEAVE ME HERE. MICHEAL! MICHEAAAAAAAAAAAAAAL!" fit
Fit is so fire, it'll have kids screaming
Fit is so fire, it'll have resturants being burnt 🔥🔥🔥
I can hear it...
If these spring locks can’t snap shut while I’m in a suit and kill me slowly from internal bleeding, punctured lungs, and organ failure, well then I say no deal!
Seriously, this is an absolutely incredible build.
next video: i came back after dying in a springlock failure
💀
He always comes back
Underated
nah we would have to wait 30 years for that
@Qu1nni3_. he does NOT want to look like jimmy neutron
4:50 i swear this is the scars that willam had in the comics
Wow, lore accurate lmao.
My school had Fnaf books once then all the books even unrelated to Fnaf were gone
5:46 „this is the purple man, the purple dude“
He literally said everything except purple guy😂
purple fella, purple male, purple specimen, purple thing
@@waffler-yz3gwpurple dog
Magenta fellow
Lavender lad
magenta moron
i like how the point of every single fnaf game is "DO NOT DO ANYTHING OF THIS IN REAL LIFE PLEASE" and this fella just had the balls to say *"nah im gonna do it anyway"*
As a pretty young fnaf cosplayer using hot glue, I can confirm this is the adult version of a 10 year old hot glue project.
Hot glue, cardboard, scissors and pipe cleaners are the starter pack for new/young cosplayers.
@@benja2998 true.
@@GingyPrestonyour springbonnie looked great!
@@Pumpkingaming-xo9yf I’ve updated it quite a bit
@@benja2998 im a new cosplayer and this is my exact setup (though i use metal wire instead of pipe cleaner since its shape doesnt move)
6:04 oh my god that's so brutal
Just imagine how it would feel like...
@@tyransaaiman5232 😬
@@marvityx feeling that all over your body and your lungs slowly filling up with blood...
@@tyransaaiman5232 AAAAAAAH
@@marvityx while you slowly drown in your own blood...
*He-hey! Glad you came back for another night! I promise, it'll be a LOT more interesting this time! We found som-some great new relics over the weekend, and were out tracking down a new lead RIGHT NOW! So, uhh- let me just update you real quick, then you can get to work. Like, the attraction opens in like a week, so we have to make sure EVERYTHING works, and nothing catches on fire! Uhm, when the place opens, people will come in at the opposite end of the building, and works their towards you, and PASS you, and out the exit. Uh, yeah you've officially become part of the attraction. Uh, you'll be starring as... The Security Guard! So not only will you be monitoring the people on the camera as they pass through, you know, to make sure no one STEALS anything or, (makes out?) at the corner, but you'll also be a part of the show! It'll make it feel, really authentic I think. Uh, now let me tell you about what's new. We found another set of drawings, always nice, AND A FOXY HEAD! Which we think could be authentic! Then again, it might just be another crappy cosplay. And we found a Desk fan, very old school, metal though, so watch the fingers! Uh, heh! Uhm, right now the place is basically just, you know, FLASHING LIGHTS and SPOOKY PROPS. I honestly thought we'd have more by now, uh so if we don't have anything really cool by next week, we may have to suit you up in a (Freddy/Furry?) suit, and make you walk around saying: "BOOO!" Hehe. Uh, but you know like I said, were trying to track down, a good lead right now. Uh, some guy who helped design one of the buildings, said there was like, an extra room that got boarded up..? Or something like that. So! Were gonna take a peak, and see what we can find. Uh, for now just get comfortable with the new setup. You can check the security cameras over on your right, with a click of that blue button. Uh, you can toggle between the Hall cams and the Vent cams. Uh, then over on your far left, you can flip up your maintenance panel. You know, use this to reboot any systems that may go offline. Uh, in trying to make the place feel more vintage we have overdone it a bit! Heh heh. Some of this equipment is BARELY functional! Uh, I wasn't joking about the fire, that- that's a real risk. Uhm, but the MOST IMPORTANT THING, you have to watch for, is the Ventilation. Look, this place will give you the spooks man, and if you let that ventilation go offline, then you'll start seeing some craaazy stuff man, keep that air blowing! Ok, keep an eye on things, and we'll try to have something new for ya' tomorrow night."*
I AINT READING ALL THAT!👶🏿
I literally red this in funtime Freddy's voice just because of the beginning stutter
@@VIadim no, they are literally the colour red.
Bro became phone guy
None of the replies have mentioned this being Phone Dude's Night 1 call yet, sad.
"Isn't there, like, an entire genre of games to explain why this is a bad idea?"
William: Lets use springlocks to save money!
Springlocks: *5000$ or smth*
Henry: TAKE MY MONEY
Maybe it was cheaper in the 80s to buy a bunch of springs, or more likely, the alternatives were even more expensive.
@@Laz7481 It was less expensive but at the same time it was wayyyyyyyyyyyyyyyyyyyyyyyyyyy harder to create for that time
@@Namelessman.guy2less expensive than what?
Buying costumes of your animatronics? They arent just costumes they are indo folding animatronics so there is ni way they are cheaper
@@mariox204 Brother do you know that Henry created the base endo from literally pieces of metal? The entire body was created by Henry creativity
@@mariox204 The costume in general of the animatronics isnt expensive at all unless you are talking about the Toy animatronics
Hmm spring locks aren't a bad idea! I think I will use them I my bunny costume. Thanks for the idea 😆
What if they fail the spring locks
@@martyvr1 oh way then...
How are spring lock suits working for you
@@martyvr1 um...
great idea, tell me how it goes!
Actually the fact that the legs don't activate is realistic, because in the games when William Afton gets springlocked the springlocks for the legs don't activate for some reason. So great job 👍
How do you know this
@@V1DE0-STARZ he was one of the souls watching
Did he steal a phone?
@@V1DE0-STARZ probably because he was able to kneel (kneel? kneal? idk) down when the springlocks were failing (or he kneeld because he flinched from the springlocks he lost balance) or because he was able to move himself to sit against a wall for 30 years
you have no way to know that
"And the blades facing the inside, towards the wearer do what exactly?""
"They make it spicy."
Hey! So this is pretty good tho I have a lot of things to suggest. First off, due to the stunning size of the springlock, you're having the casing be way too big to be inside an animatronic. And of course, the rod extends outward the casing, sticking out in a very unaesthetic way. I would reccomend putting the springlock laterally and using a lever mechanism attached to the springlock so that it can lower the radius of your arm, and of course prevent the sprtinglock from spoiling the costume's look. The ribcages are great but not 'funtional', and of couse the rest is pretty awesome !
the man the myth the legend, love your stuff man thank you for the feedback! you’re doing some amazing things on your channel seriously
Awsome
Thank you for your input Mr Afton.
@@DownLoadContthen you’re gonna remake it someday, right?
It's nice to see Henry and William help each other out. What a duo
There is one very simple design method to make the springlock suits not deadly. Make it to where the suit mode was the default and then crank the animatronic parts into the middle to become an animatronic. A malfunction will cause the robot to go limp and the suit is completely safe.
Awesome and entertaining video by the way, keep up the good work.
Kinda stupid thought, but I'd like to believe Henry and William thought of this exact scenario and showed it to investors... Only for the conversation to go like this:
I - So... What if they fail on stage? Wouldn't that ruin immersion?
H - I mean... Maybe?
I - So you should invert the default stage to animatronic mode.
W - Sir, people could die. Those springlocks are no joke.
I - You're doing this for the immersion either way! Maybe you could just make a safe room so any potential victims just go there to get treated or something, and pretend the characters just, idk, went to the bathroom.
H - ... WHAT.
W - This is f**Ked up.
I - It's either that, or no investment money for you. You can decide.
H - ... Fine. We'll at least put some safety training tapes for the employees.
W - ... This is definitely not gonna sit well with OSHA.
@@kamiwriterleonardo6345osha? I hardly know... sha? Idk sounded better in my head
if a suit that defaults 2 suit mode fails it could damage the expensive endo skeleton...minium wage labor on the other hand...much easier 2 replace
@@kamiwriterleonardo6345 It may be a stupid thought, but that doesn't mean it isn't a great and funny one.
@@Jack-yo2bc And with Willam about to become a deranged serial killer, he saw this as an absolute win.
I am so glad you did not put this contraption on, I was getting anxious watching this the whole time. Great video.
Fr
The video would not be on if "something" happened
Literally "we created the Torment Nexus from the hit scifi novel Don't Create the Torment Nexus" all FNAF media says springlock suits were a bad idea that Fazbear entertainment had
Imagine You’re a nurse or doctor and someone comes in needing emergency medical attention and you go into the surgery room and find springtrap laying on the table (it’s this guy) 😭💀
"Welp, guess we pull the plug. Yeah, sorry, but no amount of surgery is gonna fix that."
Pulling the plug ain’t gonna do nothing once he goes flat he’ll sit up and threaten you for doing it then plug it back in to pretend he dies and doesn’t have to come back 😭
It's so cool that you created the Torment Nexus from the hit sci-fi book Don't Create The Torment Nexus
Literally was coming here to comment this
This is crazy how close we are to making fnaf ideas real, but what’s even cooler is that I have the same burgundy jacket
What’s even cooler is that I haven’t seen my wife for years
What’s coolest is that you allegedly outlived your son.
@@TheREALManBehindTheSlaughter PURPLE GUY?!?
@@TheREALManBehindTheSlaughter A FURRY?
@@Epic_sans1133 NUH UH
"ok done with the video why are these springs pushing i-"
-famous last words
If henry Emily had a RUclips Channel:
Lol fr
@@Germanlepoard2a7v PURPLE GUY REAL?
@@deffinetly-a-rock yes it's me
@@Germanlepoard2a7v😂
@@Germanlepoard2a7vI'm going to take ur badge cuz its toast
Holy shit
He did it
He actually did it
"We would like to announce that we've finally created the Torment Nexus from the famous work 'Don't create the Torment Nexus'"
"1M likes and I wear the springlock suit and springlock myself"
Last famous words 💀💀💀💀💀💀💀
😂😂😂
I don't want to be generic, but, c'mon, can we just appreciate that in 2:20 he *risked a chance of having his arm spring-locked?*
Like fr
Bro trusts the process
***screams***
Looks great! Just as long as nobody actually wears that, holy crow! How did Henry and William ever think this was a good idea?? Like.. I imagine them testing the springlocks to see how well it works and them just being like “hm, seems legit” and then casually wearing the suits to entertain kids on stage somehow
Shut up man we were low on budget
We got kids to feed ya know
Henry: "hey William i had a great idea, what about we make fur-suits but, hear me out, bear trap?"
@@pdd5793 haha, I imagine it being Williams idea first and he’s like “I haven’t slept in 36 hours!! And I have created the most revolutionary invention yet!!!” And then Henry takes a hard look at every liability risk and is like “shut up and take my money” and then that’s how the suits came to be
Actually the springlocks worked really well. But the spring bonnie suit was old and had water damage, so when William got in it, the moisture from his breath, his sweat and the water dripping set it off since it was so old.
@@PercabethYessss yeah I know, but the possibility of that happening at all is still a massive liability even if it’s rare
downloadcont after wearing suit: GET IT OFF *SCREAM*💀
I love how you have successfully recreated the horribly dangerous and unintended aspects of this contraptions without it having even the tiniest shred of actual function. Kudos.
this is your best work yet, i cant wait to see more of your life threatening projects
The fact that theres an entire franchise explaining why NOT to do this😂
Its not a torture device, it is when you insert the endo into the suit, and then unwind the locks, to hold it in place
"At long last, we have created the Torment Nexus from classic sci-fi novel Don't Create The Torment Nexus"
Between this and the dudes making actual lightsaber, I think the future is gonna be pretty lit
I swear someone is actually gonna end up killing themselves from attempting to make spring lock suits too accurate😭
On a side note these make good saw traps👍
If you make em accurate enough and u know how to use em then you wont die!
yeah and someone will probably murder 5 kids in a pizzeria and then get springlocked in the suit after the ghost of the kids corner him into the suit and then end up being a reanimated corpse possessing the suit
Missed opportunity to make the purple man dummy wear a purple shirt😔
"9-1-1 what is your emergency?"
"Haha so funny story, uh you ever heard of Five Nights at Freddy's?"
"..."
[Metallic coughing]
This made my anxiety levels go up really high, but it also satisfied my curiosity at the same time 👁️👄👁️
That’s one of the best replications of a spring lawsuit that I’ve ever seen even the spring locks suits from from the movie there’s still like they’re made of plastic so like that’s the best representation I’ve ever seen
Warlord in the nuclear apocalypse making this guy build torture devices for his dungeon
'TIL DEATH DUE US PART
But we’re already passed that phase
@@Ozymandias54This is a brand new start
Really cool video!! This death trap works VERY nicely as a proof-of-concept! And I'm totally fine with you not using actual ballistics gel lol-I was still impressed by what it looked like with the mannequin parts and the bottles! Honestly, I'm glad you took it that route-imagine how underwhelming it would've been if the springlocks couldn't actually get deep enough to draw blood! For something like this, I'll sacrifice realism for spectacle any day!
If you ever decide to expand this design to create a full-body springlock suit AND failure, that would be AMAZING, but imo that would only take this 9/10 video to a 10/10!
I fricking love your purple clothes it's brilliant.
the manequin: I AWAYS COME BACK
"I made a springlock suit"
Famous last words
0:15 what the heck did you just search up💀
The legendary rule 34
1:55 downloadcont gets springlocked 2:57 Stickman gets springlocked 3:25 afton gets springlocked 3:34 onion gets springlocked 3:37 onion gets springlocked again 3:58 mannequin gets springlocked 4:26 brush gets springlocked 4:44 foam head gets springlocked 5:58 dummy gets springlocked 6:55 can gets springlocked
He's springlocked, you're springlocked, I'm springlocked. Are there any other springlocks I should know about?
Lol
@@KydroYeast *ahem*
*springlock noises*
...
I'm outta here.
LETS GOO!!!!! YOU KEPT YOUR PROMISE!!!
DUDE this is SO SICK!
and I just love how informative this video is, but funny at the same time.
:quotes:
0:40 - "so instead of using the 44 pounds, *throws at max capacity*-"
1:31 - *while beating steel rings against the ground* "so i went back to making springlock arm attachments."
1:38 - "now this, is a metal pipe."
2:11 - "it was able to hold on to this mannequin arm, so I imagine it would do something more terrible to . . . you know. . . . a human arm?"
2:41 - "so when i was building the springlock chest area, the breast area, the.. the chest breast area on the springlo-"
There is a whole franchise consisting of 8+ games, 10+ books and a full feature film on why this is a bad idea.
this is so educative, and i am not joking, this enriches my knowledge
i mean there's a whole game that explains why springlocks arent a great idea but YOU ONLY LIVE ONCE LET'S GOOOOOOO
Dude, I almost screamed after reading the title. 😭 That's how excited I am for this thing. Also I really appreciate that you used a Ballistic Gelatin to test it on. You're crazy but I love you for it, man. ❤❤ Keep up the good work without hurting yourself in the process, please. 😊
3:59 why is this so funny💀
Fr 💀😭😂
FR
We have people making working animatronics, and people making working springlock mechanisms. Multiple on both counts actually.
We need a collab to get the concept working together as described in FNAF 3. I wanna see a functioning Endoskeleton(not even one of those fancy walking around ones that one guy made per say , just like a standard wave and sing and talk on the stage type one: sure the ones in FNAF 3's tapes could walk , but ones in FNAF 4 didn't do that in animatronic mode.) be compressed into a suit and a person climb inside with said endoskeleton in it(probably with some sort of extra safety for that part). That's the entire point of them, maintain the illusion by having the exact same suit for both. Freddy completes his stage show, curtain closes, a minute later he's standing on the same spot on the stage(stains and all) but after a few seconds of waving turns to walk down to say hi to the kids, non the wiser now there's a person using it.
Great video! The moment this showed up in my feed, I remembered anticipating it after watching your last videos. Keep it up!
This is so high quality, massively underrated channel
I have been waiting for this video for so long and it paid off thank you for making more and the quality is so good keep up the grind
5:18 yeah yeah the cool stuff 💀
Fnaf fans think it would be a owner to die to a spring lock suit
I made a spring lock suit.
“Spring lock failure happens”
OH FU-
Hello? Hello, Hello? Great job! Michael Reeves would be proud. The springs get a little quirky at night and... all day.
I just imagine on the news, Guy gets hospitalized by "Spring lock" suit he made.
“Wait isn’t it summertime?” Famous last words
That is amazing. That also might be a device used in saw. And it did actually look like the movies springlocks.
0:17 y’all forgetting about his screen
The green site
Research purposes lol
Whats with it lil bro?
@@Iamjustapersoninthisworldhe had to censor it
So it obviously wasn’t a good site
2:01 imagine if the spring locks went off on camera
While people like techofur makes safe springlocks, this dude has dedication to the real thing
3:30
"Thats basically a brear trap"
Me: "More like a....bunny trap"
Get it? Bcz Springboine is a rabbit..
Oh, who am I kidding my jokes are shit.
No you ruin the joke....you could of said more like a spring.......TRAP
@@darkbonnie87fan Oh, yeah! Thats what I was going for.😅
5:50 = best thing ever. KEEP IT UP!!
The perfect Halloween decoration to scsre off neighbors.
5:58 spring lock time
wow man, I liked the idea of torso springlocks, new subscriber
Theres an entire video game franchise explaining why this is a bad idea 💀
99+ calls missed from Afton Robotics
Natural Selection At Its Finest.
I'm shocked it didn't actually springlock
Great, now buy an abandoned chuck e cheese and then make it successful.
Dude just casually makes a modern day torture device and everyone’s like “neat”
Thats Amazing Your So Talented
IKR!!!
you're*
He actually did it 💀🙏
4:36: Plot twist, I already have scoliosis
SAME LOL
william afton casually recording how he did his springlock suit: