Truly innovative design. It's fast and easy to use. Thanks a lot for your videos. They are very instructive. I'll definitely be making a few things soon.
Absolutely love it and was all ready to build until I thought I heard you say I would have to buy plans which I’m not able to do unfortunately. Love the design! Beautiful… and I love your razor blade holder as well. Keep it up. Definitely subscribing
You are a friggen genius! I've seen several ideas for a belt sanding block, but yours is by far the best! Are there measurements somewhere for the layout? Really enjoy your videos.
Great job!! There is an added benefit of your wood block. You can add a right-angle fence to one side. This will help sanding edges square. You could also add a 45-deg fence to the side. This will allow you to sand longer miter corners.
Excelente mi hermano, e visto todos los videos de como hacer un lijado de madera, y hasta este momento es el mejor diseño que e visto el más práctico inteligente y rápido y bonito. 20 puntos mi hermano. Sigue creando más cositas de madera.
Absolutely in love until I saw I had to buy plans. ☹️. Haven’t been able to work is why I have to make my own sanding block. Amazing design though. And I love your razor blade holder as well. Love your stuff. Keep it up 👍
Thanks. www.instructables.com/id/THE-ULTIMATE-SANDING-BLOCK-1/ . Yes it would working if you change some dimensions. In the Instructional Document is an explanation how you have to change the dimensions.
Just an idea. But how about adding a pin in the back to stop it fully pulling out but put the pin in an elongated hole to allow it to slide. Great build though. Like it
thanks for sharing the video but the thing is preparing the sand paper takes too much time so not a good choice, best one so far that i've seen is the one with block of wood screw in the middle and use the sand paper friction to hold it in place and no preparing sand paper just the right length
Wunderbares projekt, ich werde Deine Pläne vielleicht noch ordern. Aber eines musst machen : auf der Heimwerkerhelden Seite das große "Gratis" aus der Überschrift nehmen, und 7 Euro ist schon ein bisschen happig, wenn man sieht, dass der Truppe sie für 4,95 verkauft. Nur so als Anstoss. Für mich als Rentner ohne große Rente sind 7 Euro schon einiges ! Trotzdem würd ich lieber jemanden wie Dich unterstützen, als den Truppe (nichts gegen Ihn, aber er hat genügend)😉😉
You are a gifted inventor. Your videos are a real treat. Thank you.
The best solution I ever seen! nice build.
Wonderful idea! Genius!! Everyone wants plans, including me!! 😋
Thanks. Maybe you read my article. I'm already working on plans.
@@ISIMPLYBUILTIT we will apreciate your engineering. thanks!
Awesome!
This is AWESOME, going to get the plans...NICE video!
Great design, beautifully executed
Thank you for the very comprehensive plans of the sanding block.You explain things very well and I enjoy watching all you videos. Thumbs UP.
Thank you very much. I'm glad to read that.
This is pure woodworking and engineering genius!
Truly innovative design. It's fast and easy to use. Thanks a lot for your videos. They are very instructive. I'll definitely be making a few things soon.
Thank you so much. I'm glad if you like it
Like everybody else, I hope plans are available or soon will be, This is an incredible sanding block. Thanks for sharing!
Thanks. Maybe you read my article. I'm already working on plans.
Hello there. good idea. Making Hand Sanding Block was nice. Convenient and practical. congratulations. Thank you..........
Thank you
Wonderful design. Can't wait to build a few. Thanks
Thanks
Whenever I hear *ISBI* complete a sentence, I expect a hearty Jörg Sprave laughter to follow 😅
:-)
Very nice tool . Godd work. Thank you to you. Norbert
Thanks. I'm glad if you like it.
a very beautiful and smart idea! i will definitely build my own
superb idea and workmanship, I also prefer sanding belts because they last longer.
Thanks
I like your use of a lever for quick tensioning.
Thanks.
Great idea. I will use that one. Thank you.
Thanks
What a great idea and a very useful tool. There's only one thing missing...
... paint it dark grey and you've got a "Festool"! ;-)
Thanks :-). That would be nice.
The perfect tool for grinding by hand ..! Good work..!
Thank you.
Awesome design and build, by the way 👍
Thanks
Really cool sanding block. Great idea
Thanks
Grande! Ottima realizzazione e ottima spiegazione.Thumb up
Grazie
Amazing little accessory. great video. What flat tooth blade are you using?
Absolutely love it and was all ready to build until I thought I heard you say I would have to buy plans which I’m not able to do unfortunately. Love the design! Beautiful… and I love your razor blade holder as well. Keep it up. Definitely subscribing
Mind blown! Awesome work brotha!
Thanks you so much
Nice project, and useful too. Thanks for the plans!
Thank you. You're welcome
Great Idea just awsome !!! I Hope you share the plans.
Thanks. Maybe you read my article. I'm already working on plans.
This is a great sanding block, how about a rough sketch with dimensions? 👏 👍
Thanks. Maybe you read my article. I'm already working on plans.
You are a friggen genius! I've seen several ideas for a belt sanding block, but yours is by far the best! Are there measurements somewhere for the layout? Really enjoy your videos.
Just bought your plans for this built!love your design. Ächt cool gmacht! Gonna tell you if it worked!
You must be an engineer...Most people would just sketch it with a crayon and re-do it several times to get close....Great job
Thanks. Indeed i'm an engineer :-). I had made plans first.
Great idea, Philipp!!
Thanks
Great and all so simple too 👍
Thank you
You are one clever, clever chap. Downloading the plan now! Thank you.
Thank you
Super design!
Thanks
Tolle Idee und super Ausführung 👍👍👍
Danke Dir.
Simple pero muy eficaz. Felicidades por su ingenio
Thanks for this great idea, i have show it to others and now i have to build 4 more! THANKS!!
You're welcome. I'm glad if you like it.
Great job!! There is an added benefit of your wood block. You can add a right-angle fence to one side. This will help sanding edges square. You could also add a 45-deg fence to the side. This will allow you to sand longer miter corners.
Thank you. This are very interesting ideas. I will try this sometimes for sure.
I really like this, very neat and precise. Do you have plans?
Thanks. Maybe you already have read my article. I'm already woring on plans.
Very ingenious!
very well done
Thank you
Very nice design~! I'm going to have to try making one of these for myself.
Great idea! Thank you for sharing 😀
Thank you. I‘m glad if you like it.
I think it's great and I would also like plans or even rough dimensions.
Thanks. Maybe you read my article. I'm already working on plans.
Very cool part, maybe there is a plan, or might be .... this is a must have!!! Thanks
Thanks. www.instructables.com/id/THE-ULTIMATE-SANDING-BLOCK-1/
Esta de ensueño , esperemos puedas compartir los planos.
Brilliant! Congrats!
Thanks.
Great idea!
Thank you
Beautiful Idea fantastic I like this
Thank you.
Excelente mi hermano, e visto todos los videos de como hacer un lijado de madera, y hasta este momento es el mejor diseño que e visto el más práctico inteligente y rápido y bonito. 20 puntos mi hermano. Sigue creando más cositas de madera.
Brilliant!! Thanks for sharing!
Thanks
Absolutely ingenius !!
👍
Thank you so much.
I think this great do you have plans or some measured drawings.... keep up the good work
Thanks. Maybe you read my article. I'm already working on plans.
Very Good.
This is brilliant! Thanks for sharing.
Thank you
Very nice 👍
thank you
Nice 👍 job.
Thank you
Very good job, thank you.
Thanks
I'm really impressed and I want to make one. Any chance of sharing your plans ?
Thanks. Maybe you read my article. I'm already working on plans.
Beautiful job, dude! Really fantastic! 😃
Just subscribed!
Thank you
This is excellent. 👍
Thank you
Felicidades!!!
Excelente idea y trabajo, muy bien ejecutado y de gran utilidad...
Saludos Cordiales.
Fernando Gutiérrez Sánchez.
Tolle Idee und Umsetzung. Einen kompletten Plan braucht es wohl nicht, aber ein paar Maße wären schon praktisch zB für den Hebel.
Danke. Ich erarbeite gerade die Pläne.
This idea is just awsome! very well done my friend! Thank you for inspiring me!
Thank you so much.
Absolutely in love until I saw I had to buy plans. ☹️. Haven’t been able to work is why I have to make my own sanding block. Amazing design though. And I love your razor blade holder as well. Love your stuff. Keep it up 👍
Yes very good Plans please
Thanks. I‘m working on plans.
What size are the belts? I want to check and be sure we can get that size here in the usa..
\
Классная идея и исполнение замечательное!
спасибо
Perfect job, really! Would be great to share plans.
I agree
Please!
Yes!
Thanks. Maybe you already have read my article. I'm already woring on plans.
@@ISIMPLYBUILTIT What article?
Complimenti: bella realizzazione, estremamente utile.
I like that a lot great job.
Thank you
Exelente Video saludos de ciudad de México SUERTE👍😉
Präzise Arbeit mein lieber Mann..
Danke
Perfect! I like!!
Brilliant!
Thanks
I love you sanding block! Do you have any plans or diagrams with measurements? I'd love to build one myself.
Thank you. www.instructables.com/id/THE-ULTIMATE-SANDING-BLOCK-1/
Excelente proyecto y herramienta... enhorabuena!!!
Gracias
equsite design!!! nice job!!!! is there going to be a pdf or a cut list????
Thank you. I'm already working on plans.
@@ISIMPLYBUILTIT Great. I really want those plans ASAP. Thanks!
Super job. I need plan on toggle lever! Will this work with longer belts?
Thanks. www.instructables.com/id/THE-ULTIMATE-SANDING-BLOCK-1/ . Yes it would working if you change some dimensions. In the Instructional Document is an explanation how you have to change the dimensions.
Sehr präzise gearbeitet 👍
Eine Anleitung wäre echt cool um sowas genau nachbauen zu können.
Danke. Eine Anleitung gibt es auf meiner Homepage.
Great Video! Perfect, really!
Would be great to share some measurements or plans. Thanks You!
LLAP
Thanks. Maybe you read my article. I'm already working on plans.
Feini Sach, das häsch super gmacht !
Danke viilmil
Gracias por compartir, me parece una idea estupenda y una realización impecable.
Plans please please. Looks so great.
Thanks. Maybe you read my article. I'm already working on plans.
So cool I'm def making one of these too.
Thanks
Excelente me gustaria contar con los planos
Whats the difference between the two blades?
What a nice design, im in to a prop making and now im wondering how small of a sanding belt i could find
Then i could 3d print the whole thing too
Thanks
Just an idea. But how about adding a pin in the back to stop it fully pulling out but put the pin in an elongated hole to allow it to slide. Great build though. Like it
Thanks. I think it's not really necessary
好點子 讚~ 只不過用量大的會用研磨砂紙機 用量少的用木板隨便捲上砂紙就好了 你這個還得要專用的砂帶 有點雞肋
Brilliant
Thanks
Nice project. You can improve it adding a couple of springs on both sides. The contraction will be automatic.
Thanks. I could that do. But i want the sanding block not to be automatic. The spring should be somehow within the lever.
Richtig gute Idee
Danke
Rube Goldberg comes to my mind on this. it is very nice work though.
Thanks
needless criticism
thanks for sharing the video but the thing is preparing the sand paper takes too much time so not a good choice, best one so far that i've seen is the one with block of wood screw in the middle and use the sand paper friction to hold it in place and no preparing sand paper just the right length
Wunderbares projekt, ich werde Deine Pläne vielleicht noch ordern. Aber eines musst machen : auf der Heimwerkerhelden Seite das große "Gratis" aus der Überschrift nehmen, und 7 Euro ist schon ein bisschen happig, wenn man sieht, dass der Truppe sie für 4,95 verkauft. Nur so als Anstoss. Für mich als Rentner ohne große Rente sind 7 Euro schon einiges ! Trotzdem würd ich lieber jemanden wie Dich unterstützen, als den Truppe (nichts gegen Ihn, aber er hat genügend)😉😉
DIGITAL HEIGHT GAUGE?!? Brilliant.
very cool. Just downloaded from instructable
Thank you
Perfect
Thanks
@@ISIMPLYBUILTIT added to my project list!
You might have answered this a 100 times, but what is the reason for lifting the stop block each time you make a cut with the tablesawsled? :)
HenrikSkov1979 I would imagine it’s so the piece doesn’t get bound between the blade and stop block, potentially causing kick back
Exactly!