How To Paint Your Motorcycle / Dirt Bike Plastics - Hawk 250
HTML-код
- Опубликовано: 10 окт 2019
- Step by step how to paint your motorcycle plastic parts using high quality urethane paint and clear coat in a spray can. I had the paint custom mixed at a local NAPA parts store.
The clear coat can be purchased here amzn.to/2MamuxD
Bulldog Adhesion Promoter amzn.to/2VzMtS2
Parts Used on my 2019 Hawk 250
Paid Links
Mikuni Carb amzn.to/2ZYr1uS
Carb Jet Kit amzn.to/2ZYD4ZG
LED Headlight amzn.to/2NZXVoA
LED Taillight amzn.to/2ZUoAKt
17T Front Sprocket amzn.to/2ZZwPVK
45T Rear Sprocket amzn.to/31lBLAH
Chrome AGM Battery amzn.to/34KTnbh
Foam Air Filter Pod amzn.to/34Ho0hP
Heavy Duty Front Tube amzn.to/32GMVQV
Heavy Duty Rear Tube amzn.to/3029jri
Straight Intake Manifold amzn.to/34F8ymu
Seat Cover amzn.to/2NZRcej
Digital Speedometer amzn.to/2Qif1km
Shinko 700 Front and Rear Tire Set
My Website: jackofallmasterofnone848403856... 
Авто/Мото
pro tip: cold spray paint tends to "spit" out paint so be sure to heat the cans in a hot water bath for a smoother spray
Never thought of that, thanks heaps mate
I need this video 2y after this comment but thanks for it it and this comment
F yeah
Dude it looks amazing. I think your process has just the "right" amount of attention to detail for my project. It's a motorcycle not a vintage car. I watched a whole bunch of other videos where the hit every coat with 3 different grits of sandpaper and a rubbing compound. I'm like, I can't see my own bike when I'm riding, and no one else would look at my bike with a magnifying glass. If it looks good 3 feet away, it's good. I'll definitely get the clear coat with the hardener and call it a day.
"if it looks good 3 feet away, it's good" I apply that theory to my gf's too😅
😅💀@@CaptainVelveeta
Great job on painting. I like the white.
I literally just looked up how to paint dirt bike plastics ( for when I get my TBR7 ) and this was the first result. The odds of the first result being the on brother chinese bike is hilarious.
how long did it take you to get yours? they are almost 1800 now shipped. they went up a bunch.
Honestly
Will be painting the plastic on my Wee-Strom and want them in white. Thanks for this video it’s perfect advice and instruction for my project. It is also well presented, good job.
Thank you. I hope it turns out great!
Thanks. I have an old Goldwing with faded plastics / covers. I'm going to try painting now before I pay someone else to do it for me.
Thanks. Inspiring for my KLR650 fenders and front cowling. Looks Great and Durable :+)
Good job man. It looks like my 2021 CSC TT250.
Excellent video. Just what I was looking for. Ty 🎉
Do very light coats, doesn't have to be fully covered in first layer or even 2nd layer. It should look solid on the 3rd layer be patient or you'll get runs and chips
This is a useful video im painting my daughter's dirt bike lavender
Great work looks gnarley
Thank you sooo much…looks amazing
Thank you sir painting my 2020 hawk
I'm thinking of doing something like this to my XT250 but I'm gonna be using a bedliner type paint and just gonna leave it a matte color
Could I use this same process while using a metallic /chrome finish? Or will it just crack from bending. I am trying to get a grey metallic finish
Great job looks great , but my opinion I like the black better
Has anyone done this to a dirt bike? How does it hold up if you do single track? I don't mind scratches I am mostly worried about snagging a branch and peeling off a layer.
Looks damn good
THANK YOU The product you use to make paint stick is the key
L👀ks great! 👍👍👍
Hey do you have a video on how to prep it?
Hi! This video is very useful. Would you recommend Krylon or Rustoleum for the paint? Any specific brand that works well with the adhesion and 2K?
I bought Ace Hardware branded Paint Adhesion Promoter, and as this video suggested used it as my primer layer. Worked fine. Painted an older GIVI top box (went from black to white) and its held up quite well now going on 2.5 years. Did another one without using paint adhesion layer and it makes a WORLD of difference. Don't skip that base step
Tomorow I will do this with my exc300 :0 ♡♡♡♡
what grit sandpaper do you use? amazing vid!
Excellent paint job!!!! What's the white paint your using?
what grit was the sandpaper?
Just because im that guy. You can buy every bit of that at oreillys. Im assuming that your store doesnt mix paint but mine dose and so do others. Mine has the exact same paint. Just some information for others. It doesn't hurt to ask your local parts stores.
How have these held up a year later? I’m thinking of doing this to my little KLX110 I’ve got for a laugh. I’ve sprayed a couple parts green and purple and they look awesome but I want to get green plastics but thought about painting them but wondering if it will last.
Held up great.
Any update on how this has held up over the past 2 years? Anything you would have done differently?
Still looks great. Ive had a few little rock chips from road debris, but I have touch up paint to match.
@@JackofAllMasterofNone fantastic! Thank you for the excellent and informative video
Great video, very informational. Any idea if the 2K clear would lay down on top of plastics without primer, if they were prepped properly all the way down to 2000 sanding?
@@pat5861 you probably want to scuff the plastic first with a 3M pad, instead of polishing it smooth before painting. That way the paint will stick. You can wet sand and polish after the clear coat is put on to remove any orange peel.
I have a question. Do the plastics still have a bit of flex in them or are they completely rigid
Yes they flex
I want to spray paint my Explode 250, and our bikes look really similar.
Looks great👌🏼.. what exactly did you use to scuff up the plastics
3m scuff pad
please tell me how or do a video on how to get parts on a chinesse 250 (229)
Dude you did a great job. Bike looks really nice. How much did the paint and clear coat cost total? I have an older bike it's a 1996 honda xr200r r stroke imma be painting once it gets back from the shop.
Under 100 dollars for everything
@@JackofAllMasterofNone
Have you pressure washed your dirt bike before? Idk if it would hurt anything on it Or if you can get it all cleaned up and go ride or would you have to wait for it to dry
Justin Horn avoid the airbox and the exhaust hole and don’t get to close to the graphics and don’t do it while the bike is hot, let it cool a little but it won’t hurt it
In a bit lost. Is the 2k gloss the spray paint or is there another spray paint and you use and then you spray the gloss.
Yes. Its a base / clear system. I laid down a urethane base coat, which is the white color. Then the spray max 2k clear coat after that.
If I didn’t want the shine, is there a different type of coat to add on as a finishing touch?
Yes. You can get matte clear
How many cans of adhesion promoter/paint/clear coat did you need?
Way less than 1 can of adhesion promotor. I had 3 cans of white and 2 cans of clear.
I'm doing mine in olive drab and I'm carbon warping the tank
Would light green and black look good together? Or purple and black or blue and black? I'd love to gear ya'll opinions
Green!
do u have a manual
What did you use to clean the parts up after sanding them? Would rubbing alchohol be ok?
I use a spray that consists of an alcohol based cleaner so yes that should be fine
Thanks. Could you be more specific with the spray you use?
@@brandonwarren4498 I use a spray of 30% water / 70% isopropyl alcohol, but I am no painting expert so please don't take my advice as anything "official". I do a good enough job, but I'm sure there is a better way. Any automotive paint prep type cleaner will work
That is good information to me. Thank you. With plastics I just know that you can't use any strong solvents like acetone because the plastic won't release them like other surfaces so the cleaning agent really matters. I am wanting to paint my 4runners bumpers, mirrors, and door handles and just want to make sure I only have to do it once. I appreciate your replies and video.
It looks good but in person is the paint really noticeable or thick at all
No. I'm pretty good with a rattle can. Looks about 500% better than factory plastics.
What grit of sandpaper did you use?
Something like 400 works well for this application
How has it held up? I'm looking into painting my plastics. Thanks
Great. Gotta buy the good paint and 2 part clear for it to last
Excellent video. What grit did you use to scuff it up? Or does it matter?
I used a red scotch brite pad
@@JackofAllMasterofNone thanks for the response! Was one can of the 2k enough for all the plastics, or should I get two?
2000 grit.
I'm trying to go from white to black.... :)
What kind of paint did u use I’m looking to get black
Napa made. Not sure of the exact supplier to them. They mix it up on the spot.
Anyone thought of soap reduction on a dirt bike? I think i might try it.
What is soap reduction?
I meant soap resist. Ive been doing my skate decks like that for a few years. You essentially put down your first color let it dry than put down dish soap and spray your second color. Where the dish soap is it masks the first color so when it dries you wash the soap off and its multi colored with a pattern. If you get good at pouring on the soap you can get all kinds of cool shapes. One of my last ones looked like tiger stripes. Then you just clear coat. I use poly on my decks cause it holds up good. I might try this on a cheap bike just to see how it holds up.
Looks great! How difficult was installing that digital tach?
Easy. Have to remove the gas tank, which is simple. I have another video on installing the digital cluster
Is that a seat pad? Where can i get one?
It's just a universal ATV seat pad. Can be found on eBay or Amazon.
Where did you get the new graphics/stickers
They came with my Hawk
Can you still apply graphics on painted plastics
Of course
How are the plastics holding up?
Paint is good. Plastic is crap
How are the plastics holding up after an year ?
Great
@@JackofAllMasterofNone tnx doing the same thing to an yamaha xt 600's plastics in 20 min i got primer for plastics fillet spray and then automotive grade paint
Where do you get that filter
The respirator? Or air filter?
What would you say your total cost in paint was?
75ish
@@JackofAllMasterofNone wtf !!
Should have got the glow in the dark pigment since your going white it would be awesome at night
Where u get the stickers plz?
They came with the bike
will i need multiple cans of clear coat or bulldog? or just paint?
I would plan on having multiple cans of paint and clear but one can of bulldog will be more than enough
@@JackofAllMasterofNone would it come off easily with the pressure washer? 😂😂im pretty sure it is but i jst wan make sure before i paint my plastics
@@ftweditz1251 I wash my bike with the pressure washer. It's all in the prep work and paint quality.
Sorry, but what kind of spray paint was that? eg: brand exact name
Spray max 2k
WHO TAUGHT YOU TO SPRAY?
Nobody. Just an amateur
So frustrating that you didn't give a walk around with the white fairings on the bike
Look up a Tao Tao TBR7. White. Same thing. I will give you a walk around soon. Thanks.
@@JackofAllMasterofNone sounds good man. I just got a Hawk and been trying to figure out a way to make it my own..its between paint and hydro-dipping. It's looking awesome in the thumbnail tho
Lol this 4 year old video i almost mistaked the hawk 2 for the hauk tuah 🫣🤦♂️🤣🤣
That drill could use another coat
black the middle part of the rear shrouds so it looks like a zebra
0:17 you bought a black what???!!!
Hawk 😂
7:08 fart xd
😂😂😂😂😂
How to paint your dirt bike plastic :
Step 1- Don’t
Why do these people use spray paint to paint their stuff.. ??? There's no way that's gonna even look decent.. ??
Why wouldn't it look decent? It looks great in fact. I can rattle can better than most people can paint with a gun. Rattle cans just cost more but are perfect for a small job like a motorcycle
OK HILLBILLY.. !!
Great reply. Very smart person.