Well I have spent over 5,000 hrs in a 333 deere skidder and I have zero complaints except for the pins wear out quite fast for me it takes about a year. Looking forward to the 335P.
Adding rear counterweights increases the tipping load of the machine by increasing stability. However, they will not help the hydraulics going into relief!
A forestry package on the cat does have the guards over hoses under the tracks and cat has two hydraulic motors one for machine one for attachment John Deere only has one that drives both
When a Cat is ordered as a counter weight machine from the factory. It actually has a higher lift capacity than a machine without weights. Its not explained in the brochure . But a good tech or salesman will tell you the relief pressure are different. There is about a #1000 lifting difference between a weighted spec machine and none weighted. Machine in the video was none weighted.
This video is basically: let's point out all the good and bad things about the CAT and exagerate how terrible everything is, and make everything seem like a real drama and inconvenience..... Next lets point out all the good and bad things on the DEERE and egagerate how good it is! Bias at its best 😂😂😂😂
Maybe it’s because he has a lot of Johnndeere in his yard he’s trying to get rid of Lmfaoooo…..people are so trickery and try to be sneaky when it comes to “sales”….they’ll do anything 💀🤣🤡
Say what you want about the lifting... but the exposed hoses and areas... have had those break on many of the Case and Bob Cats, and the 1 Cat had the same problem
1:50 That is not all it's got, for a guy who thinks he knows these machines you don't know shit. As you pull back that handle, engage that little switch on it, for the hydraulic switch. I guarantee it will lift that. I've ran those cat machines plenty enough to know that. Get to know the machines before you compare.
Why not talk about price? Perfectly fine topic. We have cars and trucks from Dodge, Ford, Chevrolet that consumers have that are over $100,000. As a consumer, who just bought a skid steer for private use, Price is a consideration.
Ill put it this way I bought a 331g for $97k and a 333g was like $106k for the 299d3 xe it was $124k and for the xe landmanagement i believe it was $145ish k
Two Issues: 1 - Why would you keep pricing so secretive? Pricing is almost the most important topic in comparing brands. 2 - Charlie Crockett is fantastic.
Being a operator for a few years, i know John Deere is stronger but after so many hours of doing that, the boom will be wore more than the cat machine. I got a lil experience with the backhoes. After 500 hours the back boom on a Deere hoe will be loose compared to a CAT. .
Well. You know. In the toolbox provided with the machine. There is a white cardboard box, inside there is a grease gun… You should use it. I am pretty sure yours still in the box or you even have lost it.
The Deere does have more power and lifting capacity but wears out sooner and burns twice the fuel and probably 4 times the amount of def, speaking from experience that is a huge difference if you are operating 10 to 12 hours a day, just some food for thought
@@dan__________________ not if you know what your doing yes it may be a little slower but not a drastic amount, compared to the double or triple amount of fuel consumption and the resale value. i was just adding this comment for anyone on the fence. They are both great machines but if your an owner operator and you can cut your fuel bill in half why wouldn't you.
@@DigorDie29 Highly doubt that it's even a measurable amount of fuel difference with almost the same displacement engine. Speaking from experience, the guys with Cat's fill up just as often as we do with the Deere's.
Ran them both the jd had problems with the pins falling out of the bucket we fixed it and it kept doing it then when your moving dirt you lose it and the jd people say ya we have problems with that but we'll sell you a new pin the cat 289 good machine in my opinion the old case 1845 1840 good machines for sure the old bobcat 743 853 Melrose good machines as well just the tire machines beat the hell out of you bouncing around the track smoother I recently rented a new bobcat and the guy says we need to ger renter insurance because there is a fitting that comes lose and it my catch fire no bullshit they said that. As far as them hoses on the car takes about 30 minutes to change or replace so mechanic friendly. Then a company I worked for looked at a fly ash machine once again brand new plastic on the seat wurton from jd brand new the the ac didn't even work in it so they bought the cat one for sure true story man. Nothing against jd but you'd think after buying a 80thousand dollar machine theyed give you a new bucket pin nope it only cost a few hundred dollars
Cat is more comfortable - more room in cab and longer wheelbase. Deere is a great machine, but I always seem to get more work done with the Cat. I agree that no Cat engineer ever had to do any service on a machine so even little things are a PITA sometimes. I wish I could put the lifting power of the Deere, the comfort and controls of the Cat, the door of the Kubota, and the power of the ASV into one machine.
as being. a owner of both these machines i can tell you hands down my john deere gets used 10x more then the cat comfort controls work load speed accuracy the cat is honestly garbage compared to
Bullshit. It all depends on the application. I own a cold planing company and have always used bobcat. Swapped over to a CAT lease and couldn’t be happier. Deere is junk. Unfortunately they purchased Wirtgen (our cold planers). Spending 1.5 million on a machine to have such issues is infuriating and tells you all you need to know about Deere. Luckily they have CAT engines it’s only saving grace
My Deere techs help me over the phone and print me off all their manuals and test procedures so I can do it myself. The local Cat dealer absolutely will not do that.
Where I live the john deere is more expensive, I bought a new cat d3 dozer and 420xe backhoe, deere doesn't even come close especially on dozer. I like the case for ctls.
Well if you look on the 299 there is a hydraulic shutoff and I own three 299s and they will make a horrible noise if they can’t lift so I will just say turn the hydraulic shutoff off
I turned the relief mode off on my kitty cat lifts stuff like that up like nothing I had to go in the engine and hydraulics but we’ll worth it it’s a beast
This video is so bias😂 I’ve put hundreds of hours on that cat 299 yes they could have done better in some places but he only mentioned the bad things about it and nothing that cat did to fix that
There is no perfect piece of equipment. There are pros and cons to everything! And the more government regulations the more "what the ffffffuuu were they thinking" type of things you will notice.
Well I guess for laughs and giggles, this here reminds me of a song. 🎶The foreman in the Dell🎶 🎶the foreman in the Dell🎶 🎶High ho the dairy oh the foreman in the Dell🎶 🎶The foreman takes the deere🎶 🎶The foreman takes the deere🎶 🎶 high ho the dairy oh the foreman takes the deere🎶 🎶 the deere takes the cat🎶 🎶the deere takes the cat🎶 🎶 high ho the dairy oh the Deere takes the cat🎶
Wow...shocked I'll tell you! A John Deere salesman doing a video to show how much better a Deere is compared to a Cat...and not doing a very good job at it!! Also...ever notice a Deere at a trade show or even in this video with all the panels and stuff pulled off beforehand...because it's a PITA to service the dang thing.
Umm what? Have you serviced a g model Deere skid steer? They're so easy. Everything is within easy reach and you have so much room to work. I think cat machines are smooth and powerful but the compact track loader lineup seems like an afterthought. The Deere is just so much nicer to own.
Wouldn't it just make sense to have all the panels off so people can see it as they walk up? It wouldn't make sense to pull them off and put them back on all day.
A friend of mine just bought a 333g. It sounds horrible when you start it. The pumps whine. There is no visibility looking down to the side. I’ll take the cat all day. And the cat rides better.
John Deere is crap compared to CAT. Our local CAT has been nothing short of amazing with service. We swapped from Bobcat to 20 CATs and would never touch Deere for our application.
John Deere is a better built machine than can look at a 450 or 550 JD dozer with a 6 way blade compared to a Cat D3 or D4 like the skid steer Cat leaves the hydraulic lines exposed next to the track I guess it's a Cat thing
Well I have spent over 5,000 hrs in a 333 deere skidder and I have zero complaints except for the pins wear out quite fast for me it takes about a year. Looking forward to the 335P.
I looked at one the other day and wish I wouldn’t have got my 333 last year. Really wish I would’ve waited that thing was a unit!
Do a comparison with an equivalent ASV please
Adding rear suitcase weights to the machine, does it increase the capacity of the machine?
Adding rear counterweights increases the tipping load of the machine by increasing stability. However, they will not help the hydraulics going into relief!
A forestry package on the cat does have the guards over hoses under the tracks and cat has two hydraulic motors one for machine one for attachment John Deere only has one that drives both
When a Cat is ordered as a counter weight machine from the factory. It actually has a higher lift capacity than a machine without weights. Its not explained in the brochure . But a good tech or salesman will tell you the relief pressure are different. There is about a #1000 lifting difference between a weighted spec machine and none weighted. Machine in the video was none weighted.
neither are weighted
Please Please do a kubota 97-2 vs caterpillar 299d3 xe i need to know what is better
Cat for ride quality
This video is basically: let's point out all the good and bad things about the CAT and exagerate how terrible everything is, and make everything seem like a real drama and inconvenience.....
Next lets point out all the good and bad things on the DEERE and egagerate how good it is!
Bias at its best 😂😂😂😂
Maybe it’s because he has a lot of Johnndeere in his yard he’s trying to get rid of Lmfaoooo…..people are so trickery and try to be sneaky when it comes to “sales”….they’ll do anything 💀🤣🤡
Say what you want about the lifting... but the exposed hoses and areas... have had those break on many of the Case and Bob Cats, and the 1 Cat had the same problem
I'd be interested in the same test with a case tv450b
Is no comparison.
@@chadneil25 It is though. My newholland c345 will out lift, and out push both cat and deere top of the line machines. I own all 3.
1:50 That is not all it's got, for a guy who thinks he knows these machines you don't know shit. As you pull back that handle, engage that little switch on it, for the hydraulic switch. I guarantee it will lift that. I've ran those cat machines plenty enough to know that. Get to know the machines before you compare.
How much is the deer with the Blackhawk mulcher ?
Could you do a comparison with a John Deere and a new holland track loader? I like your videos and help a lot.
A 279 doesn’t have def also the hydraulic fluid is also in the cab you can check it from the outside while you are filling it up
Why not talk about price? Perfectly fine topic. We have cars and trucks from Dodge, Ford, Chevrolet that consumers have that are over $100,000. As a consumer, who just bought a skid steer for private use, Price is a consideration.
Ill put it this way I bought a 331g for $97k and a 333g was like $106k for the 299d3 xe it was $124k and for the xe landmanagement i believe it was $145ish k
Yeah it can lift stuff, that’s it. There’s a reason you don’t see them on any construction sites.
Two Issues:
1 - Why would you keep pricing so secretive? Pricing is almost the most important topic in comparing brands.
2 - Charlie Crockett is fantastic.
Being a operator for a few years, i know John Deere is stronger but after so many hours of doing that, the boom will be wore more than the cat machine. I got a lil experience with the backhoes. After 500 hours the back boom on a Deere hoe will be loose compared to a CAT. .
Deere pins and undercarriage are junk. They wear fast.
Well. You know. In the toolbox provided with the machine. There is a white cardboard box, inside there is a grease gun… You should use it. I am pretty sure yours still in the box or you even have lost it.
I would say forget it because of the front door swinging open and not going up overhead
john deere 333g vs Case tv620b next?
Both will be good both are super boom tech
They both are beautiful looking machines AND can out do every body else
The deer is a mighty fine machine but it still doesn't have the overhead lifting operator door
I like Deere but won’t listen to this guys “comparisons” anymore they are pretty biased.
The Deere does have more power and lifting capacity but wears out sooner and burns twice the fuel and probably 4 times the amount of def, speaking from experience that is a huge difference if you are operating 10 to 12 hours a day, just some food for thought
And you have to do everything twice with the underpowered machine. None of what you said matters at that point.
@@dan__________________ not if you know what your doing yes it may be a little slower but not a drastic amount, compared to the double or triple amount of fuel consumption and the resale value. i was just adding this comment for anyone on the fence. They are both great machines but if your an owner operator and you can cut your fuel bill in half why wouldn't you.
@@DigorDie29 Highly doubt that it's even a measurable amount of fuel difference with almost the same displacement engine. Speaking from experience, the guys with Cat's fill up just as often as we do with the Deere's.
Rear window maybe bigger on the Deere but look at all the hard physical obstructions in your escape path.
You can adjust the hydraulic pressure on the main pump of that 299. Then it'll pick that 333G up and shake it!
Bullshit.
Is that Kent Murphy?
So this is a promotional video for John Deere I guess.
Ran them both the jd had problems with the pins falling out of the bucket we fixed it and it kept doing it then when your moving dirt you lose it and the jd people say ya we have problems with that but we'll sell you a new pin the cat 289 good machine in my opinion the old case 1845 1840 good machines for sure the old bobcat 743 853 Melrose good machines as well just the tire machines beat the hell out of you bouncing around the track smoother I recently rented a new bobcat and the guy says we need to ger renter insurance because there is a fitting that comes lose and it my catch fire no bullshit they said that. As far as them hoses on the car takes about 30 minutes to change or replace so mechanic friendly. Then a company I worked for looked at a fly ash machine once again brand new plastic on the seat wurton from jd brand new the the ac didn't even work in it so they bought the cat one for sure true story man. Nothing against jd but you'd think after buying a 80thousand dollar machine theyed give you a new bucket pin nope it only cost a few hundred dollars
Cat is more comfortable - more room in cab and longer wheelbase. Deere is a great machine, but I always seem to get more work done with the Cat. I agree that no Cat engineer ever had to do any service on a machine so even little things are a PITA sometimes. I wish I could put the lifting power of the Deere, the comfort and controls of the Cat, the door of the Kubota, and the power of the ASV into one machine.
Hahaha, you'll be the richest guy in the HE industry if you manage to do that.
Also there is ventilation in the back
as being. a owner of both these machines
i can tell you hands down my john deere gets used 10x more then the cat
comfort
controls
work load
speed
accuracy
the cat is honestly garbage compared to
Bullshit. It all depends on the application. I own a cold planing company and have always used bobcat. Swapped over to a CAT lease and couldn’t be happier. Deere is junk. Unfortunately they purchased Wirtgen (our cold planers). Spending 1.5 million on a machine to have such issues is infuriating and tells you all you need to know about Deere. Luckily they have CAT engines it’s only saving grace
Why would anyone buy "a Dealer Only Service Machine" Deere Can keep it's stuff! I want a dealer that supports me no gouges me!
You can literally access every manual as the dealers? And you can even buy all specific service tools that the dealerships use
My Deere techs help me over the phone and print me off all their manuals and test procedures so I can do it myself. The local Cat dealer absolutely will not do that.
You spelled cat wrong.
Are you restarted?
I like that the Deere has 3 different styles of rocker switches. Good look
Where I live the john deere is more expensive, I bought a new cat d3 dozer and 420xe backhoe, deere doesn't even come close especially on dozer. I like the case for ctls.
Well if you look on the 299 there is a hydraulic shutoff and I own three 299s and they will make a horrible noise if they can’t lift so I will just say turn the hydraulic shutoff off
I turned the relief mode off on my kitty cat lifts stuff like that up like nothing I had to go in the engine and hydraulics but we’ll worth it it’s a beast
How do you disable the relief mode?
You notice its a john deere dealer
Just what you need half a dozen AC vents to keep you cool because you are in such a big ole spacious 2 foot cab.
The need a recessed light bars.
I’ve never seen that mesh
This video is so bias😂 I’ve put hundreds of hours on that cat 299 yes they could have done better in some places but he only mentioned the bad things about it and nothing that cat did to fix that
There is no perfect piece of equipment. There are pros and cons to everything! And the more government regulations the more "what the ffffffuuu were they thinking" type of things you will notice.
Congrats you just watched Deere propaganda for 20 minutes
Well I guess for laughs and giggles, this here reminds me of a song.
🎶The foreman in the Dell🎶 🎶the foreman in the Dell🎶 🎶High ho the dairy oh the foreman in the Dell🎶 🎶The foreman takes the deere🎶 🎶The foreman takes the deere🎶 🎶 high ho the dairy oh the foreman takes the deere🎶 🎶 the deere takes the cat🎶 🎶the deere takes the cat🎶 🎶 high ho the dairy oh the Deere takes the cat🎶
how about john deere right to repair?
I've worked at a Deere dealer and HATE Deere's "Diff steer"
There is a damn big ass camera and it is on THE BACK OF THE HOOD
NoW iF YoU LoOk HoW tHe Cats door handle is exposed now
Wow...shocked I'll tell you! A John Deere salesman doing a video to show how much better a Deere is compared to a Cat...and not doing a very good job at it!! Also...ever notice a Deere at a trade show or even in this video with all the panels and stuff pulled off beforehand...because it's a PITA to service the dang thing.
Umm what? Have you serviced a g model Deere skid steer? They're so easy. Everything is within easy reach and you have so much room to work. I think cat machines are smooth and powerful but the compact track loader lineup seems like an afterthought. The Deere is just so much nicer to own.
Wouldn't it just make sense to have all the panels off so people can see it as they walk up? It wouldn't make sense to pull them off and put them back on all day.
Yeah I own deere now. Slowly trading them in for equipment I can personally fix.
I love my Kubota😊
Would you like me to explain all the nastys with the Johnny!! lol
That’s why there’s none around 😂
stop ruining the cat's name try the 299d3 xe land magent
A friend of mine just bought a 333g. It sounds horrible when you start it. The pumps whine. There is no visibility looking down to the side. I’ll take the cat all day. And the cat rides better.
John Deere also has the loudest cab on the market, a deal breaker right there.
I'll take a Bobcat over any of these machines.
John Deere is crap compared to CAT. Our local CAT has been nothing short of amazing with service. We swapped from Bobcat to 20 CATs and would never touch Deere for our application.
I am john deer guy and yes let see the bad things about john deer ! I don't think is so much😂 like others skid steer
DEF sucks. Way to ruin diesels. No proof it even helps.
we have a winner for the ugly shirt contest
This guys next video how to advertise for John deere without actually being John deere 😂
Holy bias!
That is the baby cat go and get a 299 see how it goes against that deere
Lot of Cat owners are a little upset
John Deere is a better built machine than can look at a 450 or 550 JD dozer with a 6 way blade compared to a Cat D3 or D4 like the skid steer Cat leaves the hydraulic lines exposed next to the track I guess it's a Cat thing
Your bias is obvious 😂
Keep up the good work!😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍😍
Everglades is a terrible company with a terrible manager named Josh!
Your talking crap abiut the torsion suspension mate ! Total crap