Starting FZR 600 after 10 years

Поделиться
HTML-код
  • Опубликовано: 29 янв 2023
  • Starting a Yamaha FZR600 '91 model that has been sleeping for more than 10 years. Before starting I clean the carburetors and check the ignition.
  • Авто/МотоАвто/Мото

Комментарии • 32

  • @kz6fittycent
    @kz6fittycent Год назад +2

    Man! I used to DREAM of owning this bike when I was younger.

  • @katywalker8322
    @katywalker8322 10 месяцев назад +2

    Those carbs came up brilliantly, although this bike looks way too good to just be used as spares.
    I rebuilt my FZR600 recently. Mechanically now all good (I used a Yamaha BT1100 rear shock as I was doing this on a budget, the BT1100 shock fits and is only very marginally longer with a very marginally stiffer spring - and all the used FZR600 shocks I could find looked like they had spent 20 years in the sea), but the bodywork is tatty.
    Mine ran badly at first. Spent ages on it. Turned out the carb rebuild kits I used were useless, and better quality rebuild kits and the original idle jets cleaned up fixed that problem.

  • @mmotorcycles9497
    @mmotorcycles9497 Год назад

    Brings back memories. My first big bike was a new 93. I might have to add one to the collection

  • @coolejohn1027
    @coolejohn1027 7 месяцев назад

    I have the 89’ version but it has been standing in my garage for around 25 years. I’m going to start it next year and hopefully i can bring back all the memories of my past life

    • @jh-tech5546
      @jh-tech5546  6 месяцев назад

      I also have a '89 one. I hope to start the restoration next year. I bought this one to serve as donor bike. Have fun restoring yours!

  • @XeomKY
    @XeomKY 9 месяцев назад

    thank you so much for this video! i picked up a 1996 fzr600 last year for $500!

  • @jacobmosier4712
    @jacobmosier4712 Год назад

    Thank you so much for making this! I’m 21 and just bought a 1993 fzr600, im a 310T tech so I know little to nothing about carborators or bikes in general, this is gonna help me so much!

    • @jh-tech5546
      @jh-tech5546  Год назад +1

      Thank you. Glad to hear it can help you. Have fun with your project!

  • @charliecharliecharliecharl8554
    @charliecharliecharliecharl8554 4 месяца назад

    petrol Left turns to Green jel in carbs blocking jets , run engine dry before storage apparently , good video showing fzrs carbs taken apart

    • @jh-tech5546
      @jh-tech5546  4 месяца назад

      Thanks for your comment. I have drained all the fuel from the carbs and lines for winter storage.

    • @charliecharliecharliecharl8554
      @charliecharliecharliecharl8554 4 месяца назад

      @jh-tech5546
      You can clean carbs because they're alloy it's the carb gaskets and floats can get eaten away by horrible old fuel , I alway liked fzr

  • @ryanmcmuffi6137
    @ryanmcmuffi6137 11 месяцев назад

    Your video helped me bring my 91 fzr600 back to life thank you so much man im taking it out on its maiden voyage today

  • @jameshuang1496
    @jameshuang1496 Год назад +1

    Sounds great!

  • @KensWorldRestorations
    @KensWorldRestorations Год назад

    Nice! Good job on the carbs...a solid cleaning in the ultrasonic cleaner makes them work like new.

  • @CotaFinnaSmokeYa
    @CotaFinnaSmokeYa 6 месяцев назад

    I need lots of help fixing up my bike it’s the same as this one lots of issues from being left for while and I have little knowledge about bikes and can’t fix it 😢

  • @mariusmuller4676
    @mariusmuller4676 11 месяцев назад

    This was my bike when I was 24..... Now I am 45 and drives BMW GS 1200 GSA

  • @Nelis1992
    @Nelis1992 Год назад

    Enjoyable video as always :) question, what did you spray the seals with on 7:30?

    • @jh-tech5546
      @jh-tech5546  Год назад

      That was WD40. Could also use silicone grease. Thanks for the comment.

    • @Nelis1992
      @Nelis1992 Год назад

      @@jh-tech5546 you used wd40 just for lube to fit them?

    • @cfb9174
      @cfb9174 8 месяцев назад +1

      @@Nelis1992 Yes rubber can be a pain especially with 4 carburetors at once

  • @Jordan-op2tz
    @Jordan-op2tz Год назад

    What kind of oil can be poured into this engine

    • @jh-tech5546
      @jh-tech5546  Год назад

      I think it is 10W40 as standard. I recommend special motorcycle oil, no just car engine oil. If your engine is consuming oil and you don't drive in cold weather you can probably use 20W50.

    • @cfb9174
      @cfb9174 8 месяцев назад

      Best would be 20W50 ! Mineral ! oil.

  • @jdavis8604
    @jdavis8604 Месяц назад

    It needed the airbox
    to run correctly without it it's lean

    • @jh-tech5546
      @jh-tech5546  Месяц назад

      Yeah, it doesn't run well without.

  • @matthiasschulze393
    @matthiasschulze393 7 месяцев назад

    please please, new gaskets next time...

    • @jh-tech5546
      @jh-tech5546  7 месяцев назад

      Sure, I just recently ordered a new kit at Litetek :)

  • @steniorodrigues301
    @steniorodrigues301 6 месяцев назад

    A minha da partida e não pega