Would doing two passes (one with the white toner, one with CMYK) work with holographic paper with this printer? I would like to make holographic playing cards!
Hi If I wanna print on dark tshirts, and using a laser printer, do I have to use the white toner with ALL the designs or just designs with white color in it? Thanks
I wish Folks Would hire A Social Media Admin Because i Asked the Same thing i have my printer waiting to be used but i also went to the site and seen it was sold out.
I notice on the US cutter site the white ghost toner is out. I also notice they all say HP. I have the little Ghost one LBP622Cdw is the one on US cutter compatible or correct for my printer. Also I did not see the Sublime toners are you all going to sell them as well? Thank you for your time.
There are a few retailers selling this printer for $249. The Ghost White toner is $300. That totals $550. If you buy it from Ghost, it's well over $1,000 for the same thing. They'll bundle their branded toner cartridges with it, but I can't see them being better than the genuine Canon cartridges. They might even be the canon cartridges with the Ghost White name slapped on them for a lot more money.
Probably a dumb question but does the ghost white toner cartridge fit the icolor 560 printer? Trying to find a alternative because the 560 cartridge cost close to $500!!
Hello, I have the canon lbp623cdw printer, I would like to know if this printer works with forever's laser light no cut paper, if so, can you tell me the settings for paper, pressure, temperature and hot or cold peeling. thank you very much for your reply.
Is there any problem when I switch between the Sublimation toner and the heat transfer toner (in terms of remaining ink from the preceded printings?) and do the toners dry out when you not use them on a regular basis?
No much different with Laser cartridges, have recently been dealing with replacing an Epson 64 inch sublimation printer for 3rd time due to the head drying out for not printing in only a week. Covid pausing has made us hate Epson personally...the most terrible customer support ever. Lasers great, not sure exactly about this one.
Is this some kind of special film in the video or just a regular laser printer transparency? I'm looking into buying this printer for making PCBs with transparencies and UV film. Prints looks dense, but I need ordinary composite black instead of specialty white.
Hi, I hope you will keep making videos. There are not many RUclipsrs doing videos about white toner printing. I only just recently got my printer. I found that when I got the updated driver I could update the quality settings without going to the UI site with the browser.
Yeah, I know I've been slacking off, but I will be making a lot more stuff for this channel once I move and get my new studio and testing station setup.
Hey how you doing I would really like to know more and how are they good to print on t-shirts how much does the paper cost and where do you get it from
Hi Josh, I got this printer and have been using it for white ink address printing. Most of the envelopes got smudged. Is there any way to prevent this issue? Thank you!
@@kristamontesa220 Hi Krista, I have been been cleaning the fixing assembly but it still smudges outer envelopes. My assume is that the Absolute toner is causing the issue so I may try Ghost White toner.
Hi - this is so interesting, I didn’t realize there was a white toner .... I am going to buy the canon LBP622CDW, but when I go to the uscutter website - I don’t see the ghost toner for it .... is it no longer available?
Another user stated this info when it comes to purchasing a white toner cartridge. "Search Amazon for Misee Transfer white toner for HP m254 for $100." Continued blessings
Hi Josh, sorry to take your time on this. Im planning on purchasing the Canon LBP623, is it compatible with the ghost toner inks, and can I also use other toner brands that is compatible with LBP 623 to print on Forever Laser Transfer papers for shirt printing. Starting on a shirt printing business ,and i know so little on this Thank you, have a nice day.
Hey Josh i have a color HP laser printer m479 i bought color toner last week and the box said is compatible with HP m254, now i check for ghost toner for my HP M479 and can not find it but i saw the there is ghost white toner for m254 do you think i can use the Ghost white toner for my HP m479?
I’m having a hard time with the paper settings . What should I set my paper settings to in the printer and on vinyl master pro . Using laser dark forever paper
Canon specifies the resolution on this printer as 600x600 dpi, yet the video host claims 1200x1200 dpi resolution . . . has there been a software/hardware/driver upgrade that permits the higher resolution?
Hi Josh. Sorry to add to your list of questions. I need a solution to print white security numbers on clear adhesive labels that will be afixed to the inside of vehicle windows and read from the outside. I will be using white only, no colours. Is the white density enough for this or is it going to be too opaque? I currently have an HP M479DW but willing to buy a dedicated printer for the job. I woulld really appreciate your opinion.
You can adjust the printer density to increase the amount of white that you lay down. I don't have any experience with the model printer you have, but HP should allow you to increase the density up to 10 and you should have no issues. Also make sure to have the media settings set to the correct settings, transparent media if I recall correctly.
I have a question. I am looking to make projects with black paper and wanted to know if the method you showed on how to control density will make the white ink less harsh? I want to be able to control the level of white on my projects. Will that method work for what I am looking for? Thank you!
DPI, or dots per inch, is related to the size and resolution of your image. What you want is related to the design itself. Experiment in your editing program with opacity or even half tones to get the desired effect.
Several US retailers are selling this printer for $249. B&H Photo has it listed for that price, and Staples price matched it. The Ghost White toner from US Cutter is $300.
Blessings. I am literally getting ready to ship mine back to Amazon. I have the LBP622CDW and I prefer the HP 254dw. Printer $400, paper $200, ghost toner $300, and it's still an issue with the registration marks so I am going to go with white toner transfers.
Been searching to buy a printer and leaning towards this canon. But the online specs say the dpi is 600x600. Is that just it's advertised efficient way. Will it be capable and print in 1200 dpi if changed in settings
Sounds like the CMYK toner isn't fusing that well. I've only had success with OEM HP and Canon CMYK toner. Ghost does also make CMYK toner, but not for every type of printer.
I can not seem to be able to enter my IPv4 into my browser and get the Canon log in page, what am I doing wrong? I need to adjust the % of toner color as my blue is coming out purple. Please help :(
@@vitaniaquinland8560 The Canon printer gives you a larger range of density levels than the HP. The HP is from -5 as the lowest and +5 as the highest. Canon gives you a range of -8 as the lowest and +8 as the highest.
At $300 for the Ghost Cartridge alone, that's way too expensive. Honestly, you are better off just having any prints you need in white to be done by a 3rd party at a much cheaper rate.
But, if your running a small business you don't have time to run to 3rd party frequently and you'd be hard pressed to find one that can do this particular paper. If you're a small business 300. Is worth it
Would doing two passes (one with the white toner, one with CMYK) work with holographic paper with this printer? I would like to make holographic playing cards!
He talks about this around 4:45 . Also you can always use plain white and use self adhesive laminate with a holographic effect.
Hi
If I wanna print on dark tshirts, and using a laser printer, do I have to use the white toner with ALL the designs or just designs with white color in it?
Thanks
Hi J osh I have the Canon MF641Cw is the little ghost M254 cartridge compatible with this printer?
I wish Folks Would hire A Social Media Admin Because i Asked the Same thing i have my printer waiting to be used but i also went to the site and seen it was sold out.
I notice on the US cutter site the white ghost toner is out. I also notice they all say HP. I have the little Ghost one LBP622Cdw is the one on US cutter compatible or correct for my printer. Also I did not see the Sublime toners are you all going to sell them as well? Thank you for your time.
is it regular ink in the other ink cartridges?
Could I ask wht wright of paper it can handle? I have decal paper that is around 250 GSM (100 lb)
Is there a difference between buying the printer from them rather from buying it from a store and then purchasing the white toner after?
That’s what I’m thinking
There are a few retailers selling this printer for $249. The Ghost White toner is $300. That totals $550. If you buy it from Ghost, it's well over $1,000 for the same thing. They'll bundle their branded toner cartridges with it, but I can't see them being better than the genuine Canon cartridges. They might even be the canon cartridges with the Ghost White name slapped on them for a lot more money.
Hello very interesting!!What the difference between the oki or uninet?
Why on my second print the toner don’t stick
I want to make WHITE stickers and water tranfser decals on transparent decal paper.
Can I use this printer for it?
Would you prefer this the white toner printer or easy subli printer
Probably a dumb question but does the ghost white toner cartridge fit the icolor 560 printer? Trying to find a alternative because the 560 cartridge cost close to $500!!
Hello, I have the canon lbp623cdw printer, I would like to know if this printer works with forever's laser light no cut paper, if so, can you tell me the settings for paper, pressure, temperature and hot or cold peeling. thank you very much for your reply.
Can I use thick 200gsm paper with this printer for wedding stationery? The HP printers take thick paper but not sure if the Canon printers do
Will this work with my HP Color LaserJet Pro M255dw Wireless Laser Printer?
Is there any problem when I switch between the Sublimation toner and the heat transfer toner (in terms of remaining ink from the preceded printings?) and do the toners dry out when you not use them on a regular basis?
No much different with Laser cartridges, have recently been dealing with replacing an Epson 64 inch sublimation printer for 3rd time due to the head drying out for not printing in only a week. Covid pausing has made us hate Epson personally...the most terrible customer support ever. Lasers great, not sure exactly about this one.
Hello. Is it possible to print on a transparent sheet like the overhead projector sheet?
Thank you
Is this some kind of special film in the video or just a regular laser printer transparency?
I'm looking into buying this printer for making PCBs with transparencies and UV film. Prints looks dense, but I need ordinary composite black instead of specialty white.
Hi, I hope you will keep making videos. There are not many RUclipsrs doing videos about white toner printing.
I only just recently got my printer. I found that when I got the updated driver I could update the quality settings without going to the UI site with the browser.
Yeah, I know I've been slacking off, but I will be making a lot more stuff for this channel once I move and get my new studio and testing station setup.
How does compare to an icolor machine? I know icolor is a lot more, but is there a good reason for it?
Can you use the ghost white toner in the hp m255dw?
I have printer LBP622CDW do us cutter carry the cartridge for this printer
Everytime I switch the Ink to Ghost White Toner it takes so long to recalibrate.. Does anyone have this issue?
I have this same printer
Hey how you doing I would really like to know more and how are they good to print on t-shirts how much does the paper cost and where do you get it from
How can I find a printer compatible with the ghost ink that prints on A3 paper size
HP Laserjet CP5225
Thank you
I had the same question
Do you have an issue with this Canon printer that it prints straight lines edges with pixel-size sawtooth? Can this be fixed in print settings?
Hi Josh, I got this printer and have been using it for white ink address printing. Most of the envelopes got smudged. Is there any way to prevent this issue? Thank you!
Hi Christina! Have you figured this out? I'm having the same problem too
@@kristamontesa220 Hi Krista, I have been been cleaning the fixing assembly but it still smudges outer envelopes. My assume is that the Absolute toner is causing the issue so I may try Ghost White toner.
does the canon EU models need a voltage converter from 220 to 110? or can you just use it in American outlets?
Hi - this is so interesting, I didn’t realize there was a white toner .... I am going to buy the canon LBP622CDW, but when I go to the uscutter website - I don’t see the ghost toner for it .... is it no longer available?
You have to look for the one for the HP M254.
Another user stated this info when it comes to purchasing a white toner cartridge. "Search Amazon for Misee Transfer white toner for HP m254 for $100." Continued blessings
Hi Josh, sorry to take your time on this.
Im planning on purchasing the Canon LBP623, is it compatible with the ghost toner inks, and can I also use other toner brands that is compatible with LBP 623 to print on Forever Laser Transfer papers for shirt printing.
Starting on a shirt printing business ,and i know so little on this
Thank you, have a nice day.
How about 21cw it cann work same with Whit white tiner?
What is your prefered printer ?
Hey Josh i have a color HP laser printer m479 i bought color toner last week and the box said is compatible with HP m254, now i check for ghost toner for my HP M479 and can not find it but i saw the there is ghost white toner for m254 do you think i can use the Ghost white toner for my HP m479?
I’m having a hard time with the paper settings . What should I set my paper settings to in the printer and on vinyl master pro . Using laser dark forever paper
Hi were you able to figure out the settings I'm having a hard time as well
Canon specifies the resolution on this printer as 600x600 dpi, yet the video host claims 1200x1200 dpi resolution . . . has there been a software/hardware/driver upgrade that permits the higher resolution?
Did you watch till end where he shows how to set it to 1200 dpi?
@@hfriedman5413 Yes - this appears to be software emulation, not native 1200 x 1200 dpi; unless the printer engine was modified, it's still 600 x 600.
Hi Josh. Sorry to add to your list of questions. I need a solution to print white security numbers on clear adhesive labels that will be afixed to the inside of vehicle windows and read from the outside. I will be using white only, no colours. Is the white density enough for this or is it going to be too opaque? I currently have an HP M479DW but willing to buy a dedicated printer for the job. I woulld really appreciate your opinion.
You can adjust the printer density to increase the amount of white that you lay down. I don't have any experience with the model printer you have, but HP should allow you to increase the density up to 10 and you should have no issues. Also make sure to have the media settings set to the correct settings, transparent media if I recall correctly.
Funziona con sistemi operativi Windows o solo linux? Il massimo formato di stampa?
pon atención
I have a question. I am looking to make projects with black paper and wanted to know if the method you showed on how to control density will make the white ink less harsh? I want to be able to control the level of white on my projects. Will that method work for what I am looking for? Thank you!
DPI, or dots per inch, is related to the size and resolution of your image. What you want is related to the design itself. Experiment in your editing program with opacity or even half tones to get the desired effect.
Can we print 300 GSM Paper ?
Why are they charging $280 just for shipping? This makes the ghost mini over $1000 with tax and shipping. This is the reason I have not purchased yet.
Free shipping now
Several US retailers are selling this printer for $249. B&H Photo has it listed for that price, and Staples price matched it. The Ghost White toner from US Cutter is $300.
@@redgeminipa lini please
@@sunwukong6341 Search the web for the printer model. You'll find several places selling it. Go to uscutter.com, and search for the toner.
Where can I buy the white toner for the LBP622CDW? Link please. Can’t find it on USCutter. Do I just find one that works with the HP254?
Blessings. Did you ever locate one?
@@TheRealLilSoldier I found one eon Amazon, but it went out of stock before I could order it. Do you know of any links?
Blessings. I am literally getting ready to ship mine back to Amazon. I have the LBP622CDW and I prefer the HP 254dw. Printer $400, paper $200, ghost toner $300, and it's still an issue with the registration marks so I am going to go with white toner transfers.
@@daybreakga I'm having the same issue. I can't find the white toner in stock anywhere
@@secondhomeguru2158 I got one on Amazon for $115. They only have one in stock at a time it looks like
Hello sir it's 2023 and I just got the printer having a big problem and seems no one can help so I'm reaching out to you
Just curious what the challenge is?
@T V thank you but it'll good now appreciate you
Been searching to buy a printer and leaning towards this canon. But the online specs say the dpi is 600x600. Is that just it's advertised efficient way. Will it be capable and print in 1200 dpi if changed in settings
Yes, go to quality and choose 1200 dpi
great information
What did you change the print density to?
I set it to the maximum at 8. The range was 8 through -8 with the default density setting at 0.
@@JoshsCorner Thank you!
I’m not getting the Canon Login Page when I enter my IPv4: address, I want to change the toner density. TIA
I got login page but it askes for username and password..what am I supposed to enter lol
I like your work , I do sublimation, laser transfer and Vinyl, i subscribe to your channel
Can I sublimate into polyester?
You'd have to buy the Ghost sublimation toners to use in it.
Hi i have a canon lbp 621Cw the white prints great but the colors are all patchy no matter what settings i use, can anyone help. TIA. John
Sounds like the CMYK toner isn't fusing that well. I've only had success with OEM HP and Canon CMYK toner. Ghost does also make CMYK toner, but not for every type of printer.
I can not seem to be able to enter my IPv4 into my browser and get the Canon log in page, what am I doing wrong? I need to adjust the % of toner color as my blue is coming out purple. Please help :(
Blessings. Be sure that you have taken the IP info from the printer properties> ports> and then select your device.
Thanks so much! I will try again.
Is there a difference between the 2 printers with ink use? I heard hp uses less ink.
Neither of the printers shown in this video use ink.
@@JoshsCorner sorry amount of toner
@@vitaniaquinland8560 The Canon printer gives you a larger range of density levels than the HP. The HP is from -5 as the lowest and +5 as the highest. Canon gives you a range of -8 as the lowest and +8 as the highest.
Thx a lot
The cartridges are all sold out.
Would a stand-up pouch also fit in this printer? Like in this video: ruclips.net/video/kP_oAvNbbxk/видео.html
At $300 for the Ghost Cartridge alone, that's way too expensive. Honestly, you are better off just having any prints you need in white to be done by a 3rd party at a much cheaper rate.
But, if your running a small business you don't have time to run to 3rd party frequently and you'd be hard pressed to find one that can do this particular paper. If you're a small business 300. Is worth it
Question: what is it with you guys and the ANNOYING background “music”??? Tone it down a notch
Can I use Ghost White Toner in my HP LaserJet Pro M255dw