@@mastorakos I will check, because my RD07A has some parts not genuine, for example it doesn't have the big on/off knob, just a small one under the tank.
Hey I just came across your channel. Just got myself a AT 750 RD 07 1997. First of all thanks for your videos! I am in the process of doing a bit of maintenance on the bike and I came across something that I am not sure if is common on these bikes or not. While cleaning my chain and sprockets I noticed that the back sprocket has a free play. If I put the bike on centre stand and rock it side to side it moves a bit. Is that normal? Or am I have an issue with the bearings. I was thinking that I don't have a bearing issue as I can rock the wheel side to side and it solid. Would you be able to tell me? Thanks again and keep it up with it!
If you have free play on your sprocket from side to side (right, left) then you have to replace the sprocket bearing (only one). That's something different from the wheel bearing (there are two of them.).
@@mastorakosWhat about pressure? How much do you tighten the spark plug? I have seen thaupst you do it by eye, isn't it necessary to use a pressure spanner? With a pressure torque of 14 Mn? Isn't too much or too little pressure dangerous? In the manual it says that once you can't tighten it any more by hand, tighten it with the spanner 1/2 turn, is that correct? Thank you🛠
You speaking like Valentino Rossi 46 ❤️❤️❤️. Great video 💪🏻👍🏻
Thanks
Verry nicely done video sir !
Thanks from France 😊
Great Vid friend. Your English version is much appreciated!!
Thank you for sharing.....🤗
I have to remove the tank soon to change the fuel tap and lay some cables....
Thank you, from a Dane i Norway😊👍
Realy helpfully video, thanks ❤
What size for the spark plugs? 11mm or 14mm?
Molto utile. Grazie 😉
did you empty the tank before taking the rubber hose off?
No, I just close the petcock.
@@mastorakos I will check, because my RD07A has some parts not genuine, for example it doesn't have the big on/off knob, just a small one under the tank.
Hey I just came across your channel. Just got myself a AT 750 RD 07 1997. First of all thanks for your videos! I am in the process of doing a bit of maintenance on the bike and I came across something that I am not sure if is common on these bikes or not. While cleaning my chain and sprockets I noticed that the back sprocket has a free play. If I put the bike on centre stand and rock it side to side it moves a bit. Is that normal? Or am I have an issue with the bearings. I was thinking that I don't have a bearing issue as I can rock the wheel side to side and it solid. Would you be able to tell me? Thanks again and keep it up with it!
If you have free play on your sprocket from side to side (right, left) then you have to replace the sprocket bearing (only one). That's something different from the wheel bearing (there are two of them.).
@@mastorakos Thanks that is exactly my problem. Will order a new one. Thanks for your help!
Hi, nice. I am having problems with the third spark plug. It won't come loose. Could you tell me what is the size of the wrench? 18 mm 0.7 ". Thanks
@@mastorakosWhat about pressure? How much do you tighten the spark plug? I have seen thaupst you do it by eye, isn't it necessary to use a pressure spanner? With a pressure torque of 14 Mn? Isn't too much or too little pressure dangerous? In the manual it says that once you can't tighten it any more by hand, tighten it with the spanner 1/2 turn, is that correct? Thank you🛠
Hello why do you have to remove the fuel switch. Can you not just turn it to the off position. I have a 1992 rd04 it has 2 switches one on each side
Because it will snap off when u try removing the tank
Πώς ρυθμίζονται οι στροφές στο ρελαντί χωρίς όργανα; Καμία συμβουλη;
@@mastorakos OK Ευχαριστώ