Hey fellas, great work & I am sure a LOT of planning to pull this together. Great skill sets & I'm sure a lot of us will get some inspiring tips. Lookin forward to more from you lot! Cheers, Lewy
This setup is mind blowing. Storing tripods like wine bottles? How do you think of that? I screamed out loud when he said "so I started designing in blender..." 😂
Hey Ken! You should be able to find it if you subscribe to the newsletter on the blog page syrplab.com/global/education/building-the-ultimate-filmmaking-gear-room/
Heyo! We don't seem to have a big problem with this where we're located as our basement is pretty moisture and temperature stable. In a higher humidity climate though, a good AC unit or humidity controlled cabinet might be essential.
Great work! Is it possible to tell me where can I find the charging station's pegboard ? (If you happen to know a place that ships in Greece will be most helpfull).
Thanks Antonis! It's pretty generic - we just got it from an Australian/NZ hardware store called Bunnings. I'm not familiar with Greek Hardware stores sorry but here's something that looks similar at Ikea www.ikea.gr/en/products/small-storage-organisers/storage-system-skadis/storage-unit-combinations-skadis/skadis-pegboard-combination/49216697 Or the product we used www.bunnings.co.nz/pinnacle-900-x-450mm-matte-black-metal-garage-pegboard_p0038055?store=9518&gclid=Cj0KCQjw1N2TBhCOARIsAGVHQc5YLkTYqF-5aO6T4opehBpB7GWJz4zjGUrib9h41jM0dkyQDH1BxsUaAimSEALw_wcB&gclsrc=aw.ds Hope that helps!
Hey Lester! We got ours from our local hardware store www.bunnings.co.nz/everhang-north-and-south-adhesive-rare-earth-magnet-3-sets_p3690106 Here's something that looks similar on Amazon tinyurl.com/b2xva9db
Hey Rog! We don't currently do Blender or 3D tutorials but if you have a specific question, our animator could help :) otherwise there are some other great channels that teach the full workflow
What did you think of our gear room - ready to upgrade your own? Let us know in the comments & drop us a comment for what we should tackle on Film Builds next!
Wow your gear room design is epic!! Very impressed with your thoughts. I am keen to see your studio in action if possible, can drop by with coffee or beer.
Great looking great room for a lab. What type of lighting did you install in your room?? Your lab needs none more led lights... Alexa make all lights forest green..... ok.
Some RGB LEDs would be killer! We have LED industrial lights on the ceiling, some Quasars on the wall and usually light the space with LitePanels Gemini 1x1s when shooting. Thanks for the recommendation!
Well done! There are some great ideas in here. Thank you so much for sharing!
Thanks Matthew! Stoked you enjoyed it 😄
Wow, this was way more entertaining than I expected. Great production value, I'm looking forward to your future videos!
Thanks Julien! Tune in for a new one every two weeks 😀
Best ever design!
Hey fellas, great work & I am sure a LOT of planning to pull this together. Great skill sets & I'm sure a lot of us will get some inspiring tips. Lookin forward to more from you lot! Cheers, Lewy
Thanks Lewy 🙌🏼
The editing and pacr are perfect. Its so pleasant to watch👍
Thanks! Stoked you enjoyed it :D
✨F✨A✨N✨T✨A✨S✨T✨I✨C✨
Great video, Love your Studio. Cheers from Western Australia
🇦🇺 🦘✌🏻😎🦘🇦🇺
Oh I've missed these! Absolutely jealous of your gear room. Love love love the drawers system! Might have to borrow that idea 👌
It’s a game changer ! Visit the article linked in the description if you want the free 3d file for printing your own drawer divider joiners - easy! 👊
So nice guys! Very inspirational for our studio!
Thanks Ciprian, glad you liked it! 👊
Looks so great guys! Love the felt drawer system
LOVE IT, what a dream room
Truly such a dream - come shoot with us in it in NZ!
Looks rad guys! Big week on the tools!!
Indeed it was!
This is so satisfying 😂 Great work and cool videos guys ! I bookmarked it for inspiration.
Thanks Reno!
Sick
awesome
great video guys!
I enjoyed this a lot
Thanks Bryan!
Wish I win the gimbal. Great video. Love the charging rack.👏👏
Thanks! Good luck in the competition 👊
Its very amazing video
Cheers Barry!
This setup is mind blowing. Storing tripods like wine bottles? How do you think of that? I screamed out loud when he said "so I started designing in blender..." 😂
Thanks Brendan! So glad you enjoyed it
✌🏽 Good video team
Thanks Dave! Glad ya enjoyed it :))
Great looking man (or woman) cave 😁
Awesome project. My online complaint is you should use velcro, not zip ties. You'll regret that decision eventually
You... you might just be right on that one! Thankfully we have enough spare leads so they don't need to come off when we go on shoots
Epic build video… but where was the timelapse of the full build 😂
i cant seem to find the divider 3D scan
Hey Ken! You should be able to find it if you subscribe to the newsletter on the blog page syrplab.com/global/education/building-the-ultimate-filmmaking-gear-room/
love the charge wall, and the whole ass-theticcc
Thanks Andy!
Just a quick question regarding the camera and lenses drawers, how do you guys make it so the moisture don't ruin equipment I.E fungus?
Heyo! We don't seem to have a big problem with this where we're located as our basement is pretty moisture and temperature stable. In a higher humidity climate though, a good AC unit or humidity controlled cabinet might be essential.
Great work!
Is it possible to tell me where can I find the charging station's pegboard ? (If you happen to know a place that ships in Greece will be most helpfull).
Thanks Antonis! It's pretty generic - we just got it from an Australian/NZ hardware store called Bunnings. I'm not familiar with Greek Hardware stores sorry but here's something that looks similar at Ikea
www.ikea.gr/en/products/small-storage-organisers/storage-system-skadis/storage-unit-combinations-skadis/skadis-pegboard-combination/49216697
Or the product we used
www.bunnings.co.nz/pinnacle-900-x-450mm-matte-black-metal-garage-pegboard_p0038055?store=9518&gclid=Cj0KCQjw1N2TBhCOARIsAGVHQc5YLkTYqF-5aO6T4opehBpB7GWJz4zjGUrib9h41jM0dkyQDH1BxsUaAimSEALw_wcB&gclsrc=aw.ds
Hope that helps!
I just discovered this great video. Where did you purchase the magnets?
Hey Lester! We got ours from our local hardware store www.bunnings.co.nz/everhang-north-and-south-adhesive-rare-earth-magnet-3-sets_p3690106
Here's something that looks similar on Amazon tinyurl.com/b2xva9db
Hey I know the giveaway is over, but I want to sign up to the newsletter and can't find where to do so!
Here's the direct link! syrplab.com/global/newsletter-signup/?email=#thenewsletter
is there a tutorial to make that blender animation?
Hey Rog! We don't currently do Blender or 3D tutorials but if you have a specific question, our animator could help :) otherwise there are some other great channels that teach the full workflow
@@SyrpLab cool, thanks for the reply. I’ve had a look at a few but couldn’t find anything similar to what you guys achieved. Do you have a link?
@@rogrdotnet Our animator suggests following BlenderGurus series :)
@@SyrpLab thanks so much, appreciate it
What did you think of our gear room - ready to upgrade your own? Let us know in the comments & drop us a comment for what we should tackle on Film Builds next!
It is always interesting to see other creators gear and how they store, handle and use it.
Also a plus when you show the process behind 💪
Wow your gear room design is epic!! Very impressed with your thoughts. I am keen to see your studio in action if possible, can drop by with coffee or beer.
This was so well put together! I'm going to be saving this and coming back to it just for soothing nature of thoughtful storage. Very well done!
Thanks Mitch!
Damn that was good. Beautiful setup and creative solutions! Love those felt dividers and use of 3D printing. Can't wait to see more!
Thanks so much Danny! Looking forward to making more 😄
Thanks for Sharing
Glad you enjoyed it!
I like the solution for the charging wall station. I'm definitely stealing that idea
Please do! We'd love to see how yours turns out
Great looking great room for a lab. What type of lighting did you install in your room?? Your lab needs none more led lights... Alexa make all lights forest green..... ok.
Some RGB LEDs would be killer! We have LED industrial lights on the ceiling, some Quasars on the wall and usually light the space with LitePanels Gemini 1x1s when shooting. Thanks for the recommendation!
Great job guys! It’s a nice looking gear room. Im glad you showed us the process. Cheers!
Thanks Edwin! Glad you enjoyed 😀
This is my first time in your channel. LOVE the video!
Have a Productive and Healthy Day!
Thanks Freddy! Glad you enjoyed it
@@SyrpLab Thank you so much for taking the time to answer my question!
How the heck did you design and build this in one week! well done!
Cool ideas here. Good job! 👍
Glad you liked it! :)
Just love it guys. I’ve seen this video a few times and get inspired every time
Thanks so much Damien!
I have a bunch of Lundia type shelves. They look good and are easy to move and re-assemble. I like your idea with the wine-rack storage for tripods.
Love the tripod rack! I need to make one of those!
Works a dream and also for holding our sliders 🔥
Love this video! Did you use some kind of software to get that plan shown at 4:00?
Hey Padraig - glad you enjoyed the video! Matt did the final plan in SolidWorks which he used to generate that plan :)
Thanks dudes!! 🤘
@@padraigtreanor Any time!
Any chance you could upload a link to the joiner for the drawers !
Already available 😀. Click the link in description to go to the article and you’ll find it in there.
@@SyrpLab you guys are my 2022 fav channel lol.
@@MontrealRealEstate514 nice to hear! 🙌🏼
Really cool video guys! 💪
Stoked you enjoyed it!
So Cool! 🔥
Thanks Maurizio! 😄
The trekpak style dividers for the camera drawer, looks incredible!
Thanks Alfee! We’re really happy with them
This is beautiful!
Awesome work!
Thanks Joshua! Glad ya liked it :)
Wow! Come up trumps guys. #StudioGoals