Epson L3150 Printer - Manual Print Head Cleaning Tutorial

Is your Epson L3150 printer producing poor quality prints? It could be due to a clogged print head. In this tutorial, we'll guide you through the process of manually cleaning the print head of your Epson L3150 printer. We'll show you step-by-step how to remove, clean, and re-install the print head to improve the print quality of your printer. With detailed instructions and close-up shots, you'll be able to follow along easily and troubleshoot any print quality issues in the future. Watch this informative and easy-to-follow tutorial to improve the performance of your Epson L3150 printer.
Epson L3150 Printer - Manual Print Head Cleaning Tutorial
Same method can apply on all kind of Epson Eco Tank printer models.
Subscribe To My Channel www.youtube.co...
Thank You!
Bilal's Workshop - Technologist and Vlogger
@BilalKhalid
​bilalk.com/bilal/
#epson #ecotank #printing

[@MusaSemerci]

Thank you bro 🙏
Service asked ~200$, then I watched your video. I spent couple of hours and did all you explained. Before I could not print color, and a very bad black. But now it is printing just as new purchased.
After nozzle cleaning and all other cleaning I also suggest to do a power head cleaning from the printing maintenance on PC.
Again thanks a lot bro 🙏👍

[@BilalKhalid]

Glad it helped!

[@Cracker2Jack]

Thank you very much! Follow exactly what you did, and it works. Actually, it printed even better.

[@BilalKhalid]

Glad it helped!

[@agnesgertner5396]

Thank you very much for your video!!! Saved my christmas projects!

[@pjkarthik]

Hi, can i unclog (pushing water step in your video) all the 4 colors one by one without any gap? Or i need to wait for certain time limit for each color?

[@feng5229]

pump in water will it dilute the ink?

[@cobusfourie4737]

great video thanks very informative. Well delivered

[@BilalKhalid]

Glad it was helpful!

[@sivakumarrs6849]

good let me try this in my printer. where can i get the small flexible tube to pump smoe water at head?

[@BilalKhalid]

You can get from old damage printers in scrap

[@shashamoonyx241]

where do i can have the small pipe?

[@Cracker2Jack]

U can get a whole cleaning kit from any online shopping platform. It comes with the cleaning solution, syringe, some plastic attachment, and tubes. And it cost less than 10 bucks

[@justmanshati]

How much water you push on the pronter

[@BilalKhalid]

Around 3ml

[@topswerte5694]

Halu sir I watching your full video but I have a question sir it the same model MG3070s canon?...the same your video to on the wireless?

[@BilalKhalid]

No sir, its different.

[@ianrydell]

Amazing video thank! Saved me from buying a whole new printer

[@BilalKhalid]

Glad it was helpful

[@osmaneryurt1179]

thanks

[@canataloupe_6389]

is the second step really necessary? will it be fine if i only remove air from cartridge

[@BilalKhalid]

you can try

[@gb614erg]

Thanks, you have saved a lot of my time!

[@BilalKhalid]

Glad I could help!

[@sevaskinclinic9024]

Epson l3150 printing only colored blocks, lines and text is not printing ..even after head cleaning....same problem even after replaced head...ink pump purge system is fine...how to fix that...

[@muhammadfarhansyah5571]

Hello, I've did this process and also did the power cleaning but my black ink still does not appear. What should I do next?

[@BilalKhalid]

did you unclog the nozzle? is it unclogged? make sure

[@dondonlargavista7409]

What size of syringe and tube will i use for this printer.i have same problem with my L3150..

[@dondonlargavista7409]

Pls advise.appreciated it.

[@samyalsamy6143]

لو سمحت انا عندي طابعة ايبسون l 4150 استخدمتها وطبعت فيها حتى انخفض الحبر الى اسفل الخط المحدد ولم اركز عليه الا بعد ان تغيرت جودة الطباعة .. تم تعبئتها لكن لا زالت نفس المشكلة .. ما هو الحل

[@harshita221]

where can we get the exact size of syringe for unclogging the head and sucking the ink into thehead from ink tank

[@BilalKhalid]

you can get from aliexpress.com

[@sanjeevkmaurya-d2653]

Where does the hot water go from the nozzle head ?

[@SOCAIN]

Thank you!, i just fixed one printer:)

[@BilalKhalid]

Glad it helped

[@vivienebibat3022]

Can you perform power cleaning instead of this?

[@BilalKhalid]

Yes you can

[@moemotala6758]

ShahRukh Khans voice. Like listening to him.

[@melvinhernandez1438]

Thanks a lot!

[@GURSAHEBMANN]

MY EPSON L3150 PRINTER CYAN INK IS NOT PRINTING ON NOZZLE TEST PAGE
WHAT TO DO?

[@BilalKhalid]

Power cleaning

[@angeltaker595]

Thank you

[@BilalKhalid]

Glad it helped

[@naseerkhan2648]

Sir head will not damage by hot water !?

[@BilalKhalid]

Dont make it too hot

[@senthilnathankrishnamoorth6490]

Is it safe to use water

[@BilalKhalid]

Yeah but carefully, make it dry well before you turn it on. Dont make short the printhead that may lead to damage formatter board

[@apacheknox]

How do you power clean from computer

[@BilalKhalid]

Using maintenance utility

[@sunildespot568]

i cleaned the head, then when i pressed thepower botton it never came on, what shall i do

[@Bimtasprints]

Pls my new printer prints blank pages... whst can i do pls

[@BilalKhalid]

do ink charge
press cancel button for 5 seconds and it will start the ink charge process

[@Bimtasprints]

​@@BilalKhalid I did but still not seeing any change the ink are still in the same level 😢

[@gilrstein]

Thanks!

[@BilalKhalid]

Welcome!

[@danaidanai6118]

Where does the water go to?

[@BilalKhalid]

Underneath

[@lets_explore_nature_together]

Bhai ye pipe kaha milega syringe to mil gayi

[@BilalKhalid]

Kisi old inktank printer ka kaat lo

[@lets_explore_nature_together]

@@BilalKhalid bhai I don't deal in old printers or repair. This is my personal printer and thought to check with you if you can guide me

[@HarshKumar-tb7qb]

@@lets_explore_nature_together After seven month same problem has came to me, Pipe issue, I really don't know where to find that but will try to find in local store,

[@LiZiLiang]

Thank you I was about to throw my printer

[@itvilla52]

why R u skipping your videos so much ?