Astra Condenser Replacement

Поделиться
HTML-код
  • Опубликовано: 9 сен 2024
  • Replacing the Aircon condenser on an Astra H Twintop
    Intro/Outro Track
    Syn Cole - Feel Good [NCS Release]
    Music provided by NoCopyrightSounds.
    Watch: • Syn Cole - Feel Good |...
    Free Download / ncs.io/feelgood

Комментарии • 28

  • @Zh87119
    @Zh87119 Год назад +1

    Mate you get my thumbs up, subscription and praise.. you might be getting old but this video is gold. Will strip out our 2006 1.6 XEP Astra H condensor and refit new because of your video. Else R1500 labour here in South Africa for a relativley simple job. Thanks man!

  • @smith27uk
    @smith27uk Год назад +1

    I bought an 2006 astra 1.4 petrol a few months ago with none running AC, decided to replace my condenser which was literally falling apart, I also replaced the Schrader valve just in case, I found there is a lot of space behind the grill so I managed to do it without removing the bumper, bought the condenser off eBay for £50 plus some seals and Schrader valves for another £15 then I had it recharged at ATS using a Groupon voucher for only £42 and it's now working a treat, gets cold really quickly, I just hope it stays that way 😊

    • @VauxrezNeil
      @VauxrezNeil  Год назад +1

      Glad to hear you got it sorted I fitted my condenser last year and only got it gassed at the MOT a couple of weeks ago, so far so good

    • @smith27uk
      @smith27uk Год назад +1

      @@VauxrezNeil Good stuff, car air con is a terrible design really, even new cars supposedly need regassing every couple of years and you can spend a fortune letting a garage fix a leak for you, I asked a garage once and they said it would start at like £200 upwards which as always is nearly all labour charges but since everyone says its the condenser that causes most problems,replacing that yourself can be a cheap fix !!!!

  • @PietHeijn-qh5ff
    @PietHeijn-qh5ff 7 месяцев назад +1

    you don't have to take off the entire front bumper. you only need to disassemble the grill at the top and bottom. You can then remove the condenser from the top. saves a lot of work 👍

    • @VauxrezNeil
      @VauxrezNeil  7 месяцев назад

      I agree, you don't need to, but for the sake of a few bolts and half an hour it made life a lot easier and enable me to video things mor clearly

  • @Doile911
    @Doile911 8 месяцев назад

    Thanks mate! I have a zafira b 1.9 turbo diesel, (so i have an intercooler and a different condenser, but same chassis) and i couldn't figure out how to take the bumper off, since i have to change the cooler out (have holes in it i'm afraid), now i do! 10/10 video and thank you for making it!

  • @kamiilmane336
    @kamiilmane336 Год назад

    Great video thanks...

  • @4418CARLOU
    @4418CARLOU Год назад

    Great video.

  • @smith27uk
    @smith27uk Год назад

    Just got my 06 astra 1.4 sxi, its a much better drive than a mk3 focus i had but I do miss the later focus's interior and toys, everythings too square for my liking on the astra H, lol .I've always had ford's or vauxhall's including a few mk2 gte's, 1.8 and a mental 2.0 16v which i loved but they all rusted away, I did try my hand at rebuilding a wrecked porsche 944 many years ago but that didn't end well, lol

  • @stt6734
    @stt6734 Год назад +1

    Great video as usual. quick question... what would you say the is normal operating temperature once the engine is fully warmed up? Thanks

    • @4418CARLOU
      @4418CARLOU Год назад +2

      90/95C

    • @VauxrezNeil
      @VauxrezNeil  Год назад +1

      I would agree with 4418CARLOU that 90 - 95 is about right, the lack of a temperature gauge on the Astra H doesn't help although you can read the temp via a "secret" menu on the trip computer

  • @SmartSwitch-tc5mp
    @SmartSwitch-tc5mp 4 месяца назад +1

    Was it the condenser in the end?

    • @VauxrezNeil
      @VauxrezNeil  16 дней назад

      yes it was but a few months later the compressor failed as well

    • @SmartSwitch-tc5mp
      @SmartSwitch-tc5mp 16 дней назад

      @@VauxrezNeil Mine turned to to be the fan bracket had worn through a small part of the condenser due to a missing fixing. I used thinners and a soft wire brush to clean the damaged area then applied liquid metal. Still holding gas to this day. 🤞

  • @danielsthamer6528
    @danielsthamer6528 Год назад

    what was the inlet and oulet width in mm? having a hard time figuring out which condenser to get
    Great video by the way!

    • @VauxrezNeil
      @VauxrezNeil  Год назад +1

      Sorry, I'm not sure, I just entered my Reg number into the car parts website (think it was AutoDoc on this occasion) and compared the pictures my existing condenser, all I can suggest if you are unsure is to remove your condenser and measure the pipes, you can leave the condenser out while you wait for the new one to arrive, just make sure you plus/cover any open pipe ends to prevent dirt entering the system

  • @felixsmit2843
    @felixsmit2843 11 месяцев назад

    Good video, thanks. Which o rings did you need for the condensor connection?

  • @4418CARLOU
    @4418CARLOU Год назад

    If you install a new pressure sensor, does it need a re-gas?

    • @smith27uk
      @smith27uk Год назад

      Hi, When you remove the sensor you're opening the system up and so will release some or more likely most of the gas,, also legally speaking You're supposed to have the system emptied at a garage even before you remove the sensor unless you're 'sure' it's already empty,; why do you think the sensor is defective ? Bridging the sensor connection is only done to confirm if your pump/clutch is working or not and either proves it's not or if it does starts up that the system is very low on gas and probably has a leak somewhere !!?

  • @smith27uk
    @smith27uk Год назад

    Thanks for that, Did it fix your problem ???

    • @VauxrezNeil
      @VauxrezNeil  Год назад

      Not sure yet, MOT and re gas coming up shortly

    • @Zh87119
      @Zh87119 Год назад

      ​@@VauxrezNeiltwo months later, lol so did the replacement of condensor sort out the leak?😅

  • @DaveGsxr
    @DaveGsxr 9 месяцев назад

    Thinking of doing the same. is this where the leak was?

    • @VauxrezNeil
      @VauxrezNeil  9 месяцев назад

      Had it recharged and it was fine for about 2 months now its not getting cold again and the pump has started making a noise, another job and another vid 😉probably leave it till the spring now and get it leak tested and any refrigerant removed when its in for MOT

    • @DaveGsxr
      @DaveGsxr 9 месяцев назад

      Exactly the problem I’m getting. Noisy. I’ve just changed the alternator as the one way clutch on it was gone. Much quieter but aircon is still noisy. Definitely a job for spring 👍🏻