Yes and no, yes because the speakers are great and the design is great, and no for the awful Bluetooth chip, you should plug them into a real amp not this one, they’re not small to be Bluetooth speakers, they need some life.
Also i just saw the complete video, a 2 channel amp is not suitable for 4 channel speakers + subwoofer youre just end up getting a crappy crunchy sound when u have to get an awesome sound with 4ch, you need at least two amps or one 4 ch + sub amp
I would have used the tweeters. Put them in the top of two of the side cases. That way they spread the highs out. Sweet work bro! Really dig what you did with some old equipment. Gave it a whole new life of enjoying people.
@@zacharydarner7036 just what I was thinking. And the subs not even bumping, so...this isn't even the music from the "4.1"? Don't get me wrong, the craftsmanship is amazing! But.
@@kingkrapper108 probably not the real system playing that song. All you need is a stereo and four speakers and some wire and it takes less time than that work. Or just look out for a Dolby pro logic cheap surround sound system at a pawn shop,thrift store or garage sale.
You could buy some extension wires and mount the speakers on the wall or biuld some stands and make them floor speakers or use them as bookshelf speakers DUHHH
Pretty cool. Good job. In the future you should try black plasti-dip it gives the paper cone a rubber coating and seeps into the papers pores and gives tighter lows from paper speakers. I’ve done it to many paper speakers and subwoofers and really looks amazing and sounds better.
In all fairness it's just a cool idea. TBH no one would use weak tv speakers and go thru this, would rather just buy a $100 5.1 setup that can take more power and sound better.
@@bujfvjg7222 A great big like for this very underrated humor! It was funny as shit because it was wholly unexpected in a discussion about speakers. And yet... LOL!
Boa tarde vc é o cara mano parabéns pelo trabalho eu tenho certeza que vc é um grande profissional e entende muito bem do que vc faz um grande abraço a você e a todos vcs aí
Very cool! Although the red paint is hurting my eyes a bit. But it's not the worst part. It would be best to try to mesure the speakers' t/s parameters (they essentially describe the speaker) and use a free program like winisd to calculate the proper box volume. I also suggest using the tweeters bu putting them with a 2.2 to 4.7 uF capacitior in parellel with the woofers. But be carefull the + of the capacitor needs to be connected to the + on the terminals and the - to the + of the tweeter and the other leg of the tweeter goes directly to the speakers' - terminal (the black one). This essentialy creates a high pass filter, wich protects the tweeter from low frequencies that might damage it.
I have made one.. with class D amplifier. TPA 3116 d2. Ic based board. It gives 50+50(stereo)+100(subwoofer). It's so loud and heavy bass. A indoor party 😹 can be done with it 😉 very easily. I always play at 10-15% of power. I used 2*6inch speaker for stereo and a heavy 6 inch for bass. And 2*2.4inch midrange speaker.
you have a bright future in fabrication. would love for you to make me some cabinets. please stay far away from audio. there is so much wrong with this setup i don't know where to begin.
I have made one.. with class D amplifier. TPA 3116 d2. Ic based board. It gives 50+50(stereo)+100(subwoofer). It's so loud and heavy bass. A indoor party 😹 can be done with it 😉 very easily. I always play at 10-15% of power. I used 2*6inch speaker for stereo and a heavy 6 inch for bass. And 2*2.4inch midrange speaker.
Fun fact The 2004 - 2006 Sony Rear Projection TVs (KDF-60WF655, KDF-70XBR955, and other models) have a subwoofer built in, the 70XBR has 4 mid range, 2 tweeters, and 1 sub
Hi! Can you tell me the dimensions of the small boxes in centimeters? I have speakers drivers of the same type as used on your video but I'm having trouble in design the speaker box.
Great speaker video. A nice set of good quality speakers, that didn't cost that much to make :) Good job! Hopefully you can re-use the tweeters from the first TV in another video :) Might make something like this myself one day :)
Hi Friends! Do you like this speaker?
Please tell me know your idea. Thank you!
Realy like. But i like speake mini use battery more
Yes and no, yes because the speakers are great and the design is great, and no for the awful Bluetooth chip, you should plug them into a real amp not this one, they’re not small to be Bluetooth speakers, they need some life.
Thank you for your advice!
King Minhvuong thanks to you for taking it positively man ! I love ur work
Also i just saw the complete video, a 2 channel amp is not suitable for 4 channel speakers + subwoofer youre just end up getting a crappy crunchy sound when u have to get an awesome sound with 4ch, you need at least two amps or one 4 ch + sub amp
I would have used the tweeters. Put them in the top of two of the side cases. That way they spread the highs out. Sweet work bro! Really dig what you did with some old equipment. Gave it a whole new life of enjoying people.
Bạn giỏi quá. Bạn là dân sản xuất loa chuyên nghiệp, khéo tay quá. Tự hào Việt Nam. Công cụ làm việc quá chất
Awesome build. It is always fun to use and rebuild old stuff.
Thnak you!
*thank
Wait a minute, that’s not even a 4.1 system. It’s just a 2.1 stereo system but with two speakers on each side instead
Should have bridged the back negatives together to get the surround channel
@@zacharydarner7036 just what I was thinking. And the subs not even bumping, so...this isn't even the music from the "4.1"? Don't get me wrong, the craftsmanship is amazing! But.
@@kingkrapper108 probably not the real system playing that song. All you need is a stereo and four speakers and some wire and it takes less time than that work. Or just look out for a Dolby pro logic cheap surround sound system at a pawn shop,thrift store or garage sale.
You literally know nothing about home theater setups
You could buy some extension wires and mount the speakers on the wall or biuld some stands and make them floor speakers or use them as bookshelf speakers DUHHH
Very best workshop......
Hardwork never fails💪💪💪💪💪
Those old skool tv's - we take our flat screens for granted these days!
Greaat vid and awesome work
to bad that all that effort for such bad audio quality lmao
anyway, thanks for sharing, i love it
Thank you!
the best idea so far... very cool... great workmanship on the details
Thank you!
very good ay love musıc open 👍✔✔✔✔✔✔
For phenomena like you, the world still has salvation ... Congratulations
Pretty cool. Good job. In the future you should try black plasti-dip it gives the paper cone a rubber coating and seeps into the papers pores and gives tighter lows from paper speakers. I’ve done it to many paper speakers and subwoofers and really looks amazing and sounds better.
😅😮u 0:26 0:27
What an excellent work 😮
Really good 👍🏼
Magnífico trabajo compañero...una verdadera obra de arte....enhorabuena....bendiciones....
King of making Speakers!
Thank you!
Just awesome sir 👍
To protect those speakers you could have added grills
I will Call This Speaker The 2.1 Speaker or The 4.1 Speaker Or 6.5 Speaker Or I don't know
Very very very nice !!!
Thank you!
Awesome. The red is perfect.
More Professional than the stores.
🤣🤣🤣
Thank you!
You need some tweeters, it sounds dull.
Mylar or piezoelectric tweeters
There was two in the tv
Zsolt Péter Dániel he didn’t use them but he should have
Piezo doesn’t sound good so some good dome tweeters would be better
@@chaeyoung8908 Piezoelectric tweeters are very cheap and do not need a filter.
In all fairness it's just a cool idea. TBH no one would use weak tv speakers and go thru this, would rather just buy a $100 5.1 setup that can take more power and sound better.
SUPER MUSIC SYSTEM 👍👍👍👏👏👏👌👌👌
Like the color and idea of your creativity
Very nice job. I will give you 100 out of 100 mrks. Well done.
Very cool
Thank you!
Fantastic idea and they look really good but I was thrown off by the TV as its only the rectangular speakers out them and nothing else. Lol
If you want sound quality, it makes no sense to work hard and then just use the old TV speakers. And still leave out the treble!
and bass!! that little thing couldn't pull a foreskin back...
@@bujfvjg7222 A great big like for this very underrated humor! It was funny as shit because it was wholly unexpected in a discussion about speakers. And yet... LOL!
Those speakers used in the video have excelent sound quality, trust me
Like it. Video. south. West. Devon. Katy. Leeson 👍👍👍👍👍👍👍👍
WAAAOOO,, i can be watching this work day and night,,,its amazing, congrat..,
Is not that 2.1?
Boa tarde vc é o cara mano parabéns pelo trabalho eu tenho certeza que vc é um grande profissional e entende muito bem do que vc faz um grande abraço a você e a todos vcs aí
Very cool! Although the red paint is hurting my eyes a bit. But it's not the worst part. It would be best to try to mesure the speakers' t/s parameters (they essentially describe the speaker) and use a free program like winisd to calculate the proper box volume. I also suggest using the tweeters bu putting them with a 2.2 to 4.7 uF capacitior in parellel with the woofers. But be carefull the + of the capacitor needs to be connected to the + on the terminals and the - to the + of the tweeter and the other leg of the tweeter goes directly to the speakers' - terminal (the black one). This essentialy creates a high pass filter, wich protects the tweeter from low frequencies that might damage it.
That is so awesome how you did that. Amazing sounding how you did that.
Mama
Makita miter box......best miter box on the planet for a many years now.
All that time cutting mdf to equal sizes, then glues together uneven... This hurts me deep in my soul.
Big up for ur equipmentation, u are so equipped man....from first to last bit
Hallo. Saya dari indonesia. Saya sangat menyukai 👍karya anda
😍😍😍
😘😘😘
hey great finished product
My friend purchased a Dindinmodern speaker that has lights and loud sound. It seems equally good. I think I will purchase one
I have made one.. with class D amplifier. TPA 3116 d2. Ic based board.
It gives 50+50(stereo)+100(subwoofer). It's so loud and heavy bass. A indoor party 😹 can be done with it 😉 very easily.
I always play at 10-15% of power.
I used 2*6inch speaker for stereo and a heavy 6 inch for bass. And 2*2.4inch midrange speaker.
You could increase the length of your sub speaker port, so you could have deeper bass
But will you hear the frequency? No because that sub isn’t powerful enough
Good job man
Thank my friend!
You misspelled thank you my friend
you have a bright future in fabrication. would love for you to make me some cabinets.
please stay far away from audio. there is so much wrong with this setup i don't know where to begin.
Nice design
Beautiful work, my friend! Really well done! 😃
Thank sir!
😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃
That's a 2.1 stero system
Wow, those came out REALLY nice! Looks like something you could buy at the store. Very nice work!
Kjhuu
That came out really nice👍.
Thank you!
J
Mi
what a good video I really like your videos of projects greetings from Tijuana Mexico
Thank you!
Great project, great idea.
Before you paint, remove screws =) and use tweeters too, music is not just bass ;)
The [ __ ] (sorry I Said f*CK)
Great work mhan👏👏Naild it ....
But its a lots of work!!!!🕗🕕🕜🕒🕔🕐🕓....
Good 4.0 System i have a sound Sistem 5.1 but your system is more perfect
I have made one.. with class D amplifier. TPA 3116 d2. Ic based board.
It gives 50+50(stereo)+100(subwoofer). It's so loud and heavy bass. A indoor party 😹 can be done with it 😉 very easily.
I always play at 10-15% of power.
I used 2*6inch speaker for stereo and a heavy 6 inch for bass. And 2*2.4inch midrange speaker.
Amazing brother 😍
Fun fact
The 2004 - 2006 Sony Rear Projection TVs (KDF-60WF655, KDF-70XBR955, and other models) have a subwoofer built in, the 70XBR has 4 mid range, 2 tweeters, and 1 sub
Many tvs have subwoofers built in
I like the tools and the speaker
wow, you are a master
One of a kind speaker system!
That system needed a tweeter cos there is no high frequancy
Jabardast banaya bhai
Very nice awesome speakers
Đẹp 😍😍😍 a e cũng muốn đóng mà không có thời gian
You turn a sony tv into a bluetooth speaker, now try turning phone into a drone.
Piękna robota 😉
Masha Allah beautiful ❤😊
Good work 👍👍
good work man but is stereo front and rear, not surround sound
Talented
Excellent work 👍👍👍👍👍
You should add some acoustic foam in there to make it sound better
Bonito de ver fazendo so e fora da realidade de fazer isso aqui
WOW..LOVELY WORK...💖💖👍👍
Thank you!
can you create a big speaker with strong bass and volume ? .... nice job by the way !!
The woofer barely moves
good job, i like it, but ..... the title of this post should be changed
You made a stereo system, not a 4.1 channel.
Some people
Yes Stereo
Stereo 2 × 2 = 4 Left (2) and Right (2)
Bass 1
@@anisalial-maghrabi3215 So the correct one would be 2X2.1 ?! I think lol
😅😅
4.1 is when you have front left, front right, rear left, rear right channels not 2xleft and 2xright channels
You know what, you should make these and sell them, I bet you would make a killing off of it!
The speakers look the same as mine that I use in the studio Nice
Papa
I love the sound of the chickens in the background.
Haa. Thank you!
FANTASTIC😊😁👍
Thank you!
Nice vídeo
Thank you!
all power comes through step down converter which is 3A and 12v. It can gives you max - 36Watts!
Nice works
The Best Master
Very cool. I wish you wouldn't have wasted those tweeters though.
I know that but if I use them then the sound will be treble redundant.
@@KingMinhvuong inline resistors. Speaker crossovers have been doing it for decades
im impressed by this it just look so good. Great work man keep it up! :)
Awesome 😍 😍 😍 😍 😍 😍
King, how do you know what size cabinet to make for the speakers? Do you measure things like Xmax, displacement, etc?
Watching and sending support nice sharing
Thank you!
Ok 👍 on the refurbishment of drivers and wiring
top demais excelente trabalho
SUPERLATIVE WORK 👍👍👍
Thank you
Muito bom parabéns...
video khá ổn ngoài việc anh dùng keo nến để cố định miếng nhôm tản nhiệt.
Great job! Congratulations.
It´s 2.1 not 4.1. You only connected 2 set of speakers to the same output.
2.1 that right .and ohm is half
Hi! Can you tell me the dimensions of the small boxes in centimeters? I have speakers drivers of the same type as used on your video but I'm having trouble in design the speaker box.
18:01 you left the power button upside down why just why
bin
Excellent video friend, could you tell me that I throw it into the wood to make it shiny?
Wow, I'm impressed, you were great, you're a genius ... friend and you don't sell those speakers you do
Great speaker video. A nice set of good quality speakers, that didn't cost that much to make :) Good job!
Hopefully you can re-use the tweeters from the first TV in another video :)
Might make something like this myself one day :)
Perfect bro. Good job!
not bad nice video although these satellite speakers could have used a tweeter
Thank you!