2012 2013 2014 2015 Honda Civic How To Replace Side Mirror Cap Remove Install Removal

Поделиться
HTML-код
  • Опубликовано: 13 окт 2024
  • Step by step how to remove the painted cap on the 2012 2013 2014 2015 Honda civic side mirror.
    How to remove mirror--- • 2012 2013 2014 2015 HO...

Комментарии •

  • @videogameaddict4041
    @videogameaddict4041 3 года назад +7

    You’re very descriptive I like it, even the little things that most mechanically challenged people would struggle with you take time to explain and make it more understandable. Example, showing the clips after removing the mirror, other channels would’ve chucked it and been like “ok on to the next part!” As a mechanic myself I know these little things are easily overlooked but can make or break an install

  • @incaguaya
    @incaguaya 6 лет назад +4

    Thanks! You saved me 150 bucks.

  • @peixinyang21
    @peixinyang21 3 года назад

    Thank you! I fixed my loose mirror after watching this!!!

  • @stevennouel
    @stevennouel 8 месяцев назад

    Great video! btw, I removed both caps but when I was trying to remove the right cap I took out the white plastic to have better access to remove the cap at the top, now I am having problem with the mirror positioning control each time I adjust the mirror left and right, it sounds like the base (white plastic) is hooked to something. its rare because when i adjust the mirror to the top or bottom works. Any idea how to fix it?

  • @highrpmsdon2099
    @highrpmsdon2099 7 месяцев назад

    Mines is lose on my civic should have nyp about fixing it the same way you did yours ?

  • @briancottington3389
    @briancottington3389 6 лет назад +7

    Quick Question, How do you remove just the mirror housing? My driver's side mirror was hit by a drunk driver while parked on a street. The mirror itself is fine, the only damage is to the edge of the mirror housing and the painted cap.

    • @isabelblank1486
      @isabelblank1486 5 лет назад

      did you ever find an answer to this?

    • @videogameaddict4041
      @videogameaddict4041 3 года назад

      I think there’s a whole assembly for the holder and the skull cap’s separate. I just bought one for my ‘14 si cuz I’m in the same scenario except the whole mount is loose/cracked. You might be able to buy individual pieces from a Honda dealer if you know the part number otherwise you’ll have to buy the whole mirror as a kit

  • @ericmanuel1
    @ericmanuel1 5 лет назад +1

    Great video. Have you replaced the mirror portion with the HEATED MIRROR version? I know there is wiring which would have to be ran, and if so, where would it go?

    • @lavielemond
      @lavielemond 5 лет назад +1

      Even the non-heated version of Honda external "wing" mirrors use wiring for the electric adjustment motor/component, which runs beneath the internal door trim panel, which is simply attached to the door with clips all of the way around the sides & bottom (just place your fingers beneath the bottom of the trim & firmly pull it away from the door shell, beginning at the bottom corners...however, depending upon the model of Honda you own, any interior door handle trims & pockets will be attached to the door shell (& thus restricting the removal of the door trim until they're removed) with screws, which often have small plastic clips that obscure the screws, for aesthetic purposes & these little clips are usually best removed with a very fine blade screwdriver. Once the door trim has been removed, you simply remove as little of the plastic dust cover beneath the door trim (attached to the inner door shell with black caulking compound) as is necessary in order to gain access to the connecting clip for the mirror motor wire & simply press in the "lever" (for want of a better word) upon that connecting clip to separate them. And finally, you need to remove the 3 nuts (used to be 8mm but more commonly 10mm nuts nowadays) that hold the "wing" mirror body/assembly to the car, via openings in the inner door shell that allow you to gain direct access to these nuts.
      NOTE: Before you loosen these 3 nuts, it's best to ensure that either you (with your spare hand, if you're relatively ambidextrous) or someone else is holding the mirror assembly, as it will simply fall upon the ground if you don't, often hitting the side of your door & denting that on its way down!! Also, when you replace the power mirror wiring, be sure not to run it upon the inside of the window channels, although it's more difficult to do so incorrectly than to do it correctly, as Hondas are generally so well designed & simple to work upon.
      A 4-year apprenticeship at a Honda dealership has left me nearly carrying out menial attacks like this in my sleep, although I completed this apprenticeship in 1997!! But my many friends with later model Hondas have kept me in the proverbial "loop" re: later model Hondas & little has changed upon them in that time. Hope this can help someone, some day...?!

  • @Swagnac007
    @Swagnac007 10 месяцев назад

    What's the cover of this vehicle? It looks like Urban Titanium Metallic. I'm confirming because that's the same color as mine

  • @chicagonorb
    @chicagonorb 6 лет назад +2

    Thank you! Thank you! Thank you! This video helped me so much.

    • @DIYHonda
      @DIYHonda  6 лет назад

      Glad it helped. :)

  • @don08ngo
    @don08ngo 2 года назад

    Nice video. Where can I get a painted cap for Honda pilot 2012?

  • @liannesweet3831
    @liannesweet3831 Год назад

    Will this work on a 2019 Honda Civic Touring?

  • @symphwind
    @symphwind 10 месяцев назад +3

    Contrary to the video, there are in fact 6 clips holding the cover in, not 4. In addition to the 4 pointed out, there is one at the bottom inside corner and one in the bottom middle. These should be loosened as well prior to removal. I didn’t realize this and cracked one of them off during removal.

    • @hal6198
      @hal6198 2 месяца назад

      Do things we can change without open from door ?

  • @blakerh
    @blakerh Год назад

    Can this be done without taking the entire mirror assembly off the vehicle? I just need to replace the top part of the cap.

    • @DIYHonda
      @DIYHonda  Год назад

      Yes, you can leave it on the vehicle to do that.

  • @aidanfranits1339
    @aidanfranits1339 4 года назад

    Do the caps for the 2012 and 2013 hybrid fit on 2014-2015 mirrors?

  • @kristenozuna474
    @kristenozuna474 4 года назад +5

    Thanks got it done I was like yeah t won’t snap in. I refuse to pay a man for something I can figure out

    • @gregkeller80
      @gregkeller80 3 года назад

      Well you figured it out by watching a man explain it to you and show you how.

    • @kristenozuna474
      @kristenozuna474 3 года назад

      @@gregkeller80 and did I pay no amount thankful yes 👀👏

    • @hanzohasashi1116
      @hanzohasashi1116 2 года назад

      Would you have paid a woman?

    • @kristenozuna474
      @kristenozuna474 2 года назад

      @@hanzohasashi1116 I’m not paying for anything I don’t have to -ever

  • @inagard1
    @inagard1 Год назад

    Can this be performed on the car? My mirror and cap is broken only. Thanks

  • @Val-mm5gd
    @Val-mm5gd 5 лет назад +2

    Great video, extremely helpful 👍

  • @Iegend17
    @Iegend17 5 лет назад

    Thank you! Gonna paint my 2018 accord mirror caps 👍🏻🤙🏼

  • @jean-luccomeau
    @jean-luccomeau 2 года назад

    Do you have to have these caps painted to colour match?

  • @woody555kl
    @woody555kl 6 лет назад

    I just want to know how to get at the led turn signals in these mirrors as they dont seem very bright and i want to put some sequential lights in them

  • @Caschman1
    @Caschman1 6 лет назад

    How about for a 2017 civic heated and powered mirror? Would it be much different?

  • @_light.drizzle_
    @_light.drizzle_ 3 года назад

    thanks for all your help!

  • @jesusellano3528
    @jesusellano3528 2 года назад

    Would this work for a 2010 accord?

  • @craigparrot9873
    @craigparrot9873 9 месяцев назад

    Fantastic video

  • @xMinecraftcreationsx
    @xMinecraftcreationsx 5 лет назад +1

    Can you do a video on how to remove the cap on a 2017 civic?

  • @Caschman1
    @Caschman1 6 лет назад +1

    How about for a 2016-2018 civic?

  • @jeshgurung8075
    @jeshgurung8075 4 года назад

    Nice one thanks, this help me so much.

  • @johnargosino6218
    @johnargosino6218 4 года назад

    Anyone know how I might be able to tighten up the mirror a little bit? It's loose at the base where it swivels, not the 3 bolts that hold it to the car body. I see there is like some kind of metal hinge that allows the mirror to fold and snap in and out, but how do you tighten it? Thanks anyone

  • @Godsnotreal
    @Godsnotreal 4 года назад

    if the car is. missing and the whole thing is on the car. can I just clip it on

  • @paultaylor907
    @paultaylor907 6 лет назад

    One side view mirror defroster on my 2014 CRV is not working. Do you know how to deal with it? Thnx!

    • @DIYHonda
      @DIYHonda  6 лет назад

      Look behind the glass mirror and make sure both wires are plugged in. If they are, you may need to replace the glass portion of the mirror.

  • @Glorksnork
    @Glorksnork 3 года назад

    Thank you!

  • @alohabychoicefa9968
    @alohabychoicefa9968 6 лет назад

    Can you do 16 civic grille removal

  • @nsrracing1
    @nsrracing1 5 лет назад +1

    How does that shit not break with all that tender loving care?? I'm doing a HRV skull cap right now. There is 2 of the tabs in the bottom that completely hidden. No access for flat head.

    • @Chriswinsss
      @Chriswinsss 2 года назад +1

      Lmao tender loving care. Smacking it like hes playing whack a mole lol

  • @techbyluke6396
    @techbyluke6396 3 года назад

    You think this is the same for 2016 ilx

  • @RhythumDancer
    @RhythumDancer 2 года назад

    Can I have the black one if you do not need it ? :D

  • @1000jpok
    @1000jpok 5 лет назад

    Why would you wont to go to the trouble of removing the mirror plate when all you have to do is get two small plat headed screwdrivers under the mirror cap groove on the outside of the mirror near the indicator & gently prise it off.

    • @videogameaddict4041
      @videogameaddict4041 3 года назад

      Prying anything on the outside where the paint is runs the risk of damaging the cap. Going from the inside most likely reduces that risk but obviously now there’s more shit in your way

  • @twpaq9332
    @twpaq9332 2 года назад

    Guess I’m the only one who shattered my mirror. Lol

  • @isabelgeddeshines4059
    @isabelgeddeshines4059 6 лет назад

    I was worried glass would break if you smack it

  • @genrock6756
    @genrock6756 4 года назад

    You broke the tab of the mirror. Is that normal?😄

    • @johancycollado1563
      @johancycollado1563 4 года назад

      I thought I was the only one who ended up breaking it 😂

    • @genrock6756
      @genrock6756 4 года назад

      @@johancycollado1563 i guess that’s normal, he broke it too, after you replace what’s wrong i think you have to buy the whole part.