Wow bro.. I think this is the only one video on the RUclips describing such a awesome home automation project. Bro carry on and make more and more stuff..
@@techiesms yup. I have said before you re the "king of IOT" and you deserve this. Actually I have a qsn that is the esp board is reliable?In this project if the esp board fails we can't control manually
@@techguyz5916 Lets Assume We have a two way switch connected to Relay... If ESP Fails no issue... But if ESP is running in that case how would you read the switch status
Hi Sachin, Amazing work! You can improve the facility for this project. If the board stops working correctly or stuck in some situations. you will completely lose your control over manual too. The only solution is a two-way switch. In the case of device failure, you have control over the manual in this case.
Can you add adafruit mqtt library, and chane code according? Ubidots only 30 day free, It is not logical to pay $ 50 a month for a DIY home automation system
Hi, During this lockdown tried out your project on a breadboard which works absolutely fine on the Hardware front. i.e if i switch off/on the light it updated the switch on Ubidots. but I am having a problem on Ubidots when i click on the switch on ubidots the light does not turn on can you suggest as to what am i doing wrong?
@@techiesms As per my request on the last video! Nice work buddy! U made it. But make detail video to understand its codding also. And make it for 8 realy & 2 dimmer for fan along with Led display with some more sensor data with date & time. And I want to thanx for your Hard work.
Concept is awesome. But Ubidots plateform cost is to high. Better is if we do on sinric, and if we are using Alexa that makes everything easy. With voice and mobile control also
Hello sir.. Well after ordering all th necessary components fr home automation and assembling them i connected it to my bed room.... For a test run so that i cud then order ur Pcb desgin through JLCPCB... Nd do a permanent assembly...... Although it works absolutely fine bt.. Sometimes it does not connect nd i have to cut the power nd restart the circuit again... Can u tell y this is happening
Hi.. cool video always wanted to something similar.. Can you please tell me if switch is off can we still turn on the bulb using phone? And does it also support alexa?
Bro why can't we achieve these features with esp8266 ? I want to setup 4-5 boards for 4-5 rooms in my house but esp32 is x2 than esp8266. So please cann you tell me how can i get these features with esp8266 ?
i have designed same home automation project of internet and manual automation with feedback, i have designed this with nodemcu... i have changed the defined pins n uploaded the program, after uploading the program the relays are trigerring automatically with some time delay...... will u tell me wt is the error??
Hey Bro, can you make a device which can start and restart a pc by voice command using node mcu or esp32 board. I have made one it's functional too. But coding and disign is very crude.
Dear, I have 4ch relay which was purchased from banggood and also nodemcu. I would like to use it with both app and physical switch, Can u please guide me to do so. Thanks
hi bro . plzz tell me how to program 2 nodemcu . me ak home Automation bana rha hn . but mjhy us me 2 dimmer ki requirement hy . agr ap mjhy bta skty hy ka 2 dimmer kesy bana ga me na arduino per banaya hy . but ak time per ak hi chal rha hy . 2no ak sath nhi chal rhy. agr me chalta hn to wo bilink krna lg jata hy . plzz help us
Sir, i've done your project but there's a problem, the LED kept on blinking continuously and it won't stable and won't connect to the internet either, i've tried to contact you through whatsapp, but you never replied. Can you help with this problem.?
Hi, could I do this with "My biggest Home Automation project using ESP32 | IoT Projects | ESP32 Projects | Ubidots | LCSC"? Four devices is not enough :(
This is great But it gets expensive due to the shipping charges of PCB through JLCPCB Can we get an alternative to that Like someone who can make PCBs locally or with low shipping cost Thanks again
@@techiesms but sir I'm trying to contact it with the mains jo switch board hote h ghar m light,fan etc k liye or usme to ac hi hoga na switches m to uska koi solution btayie please
Sir I have using water tank level transmitter for measuring the tank level. The transmitter output is 1 to 5 V variable Means 1V need to set 0% 2V need to set 25% 3V need to set 50% 4V need to set 75% 5V need to set 100% Can you make gauging display via blynk app with modemcu Please make code for me
There is a problem with my NodeMCU ESP8266 CP2102 board..... esptool.fatalerror: Failed to connect esp8266: Timed out waiting for packet header. This error occurred in Arduino IDE software Plz help me find solution for this error... Thankz in advance!!!!
Hi,Sachin please make video on network topology in which we can intetconnect "n" numbers of esp8266 in different configuration like star toplogy or mesh topology.
Nice project, I tried it but after uploading the code the esp32 reset, again and again, the server connection with ubidots was successfully done but board reset again and again continuously.
@@nikhilpereira81 @askash sonani i have maked every thing but the relays turn on and off quickly and continuously i do not know why can u please advice
Awesome bro.... I followed your procedure but Internet connection not stable.... unable to control in internet... If connected with internet means, in next 3 to 5 secs disconnecting.... may i know where will be the problem?
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Wow bro.. I think this is the only one video on the RUclips describing such a awesome home automation project.
Bro carry on and make more and more stuff..
It’s is the only one
We did lot of experiments for this logic
@@techiesms yup. I have said before you re the "king of IOT" and you deserve this.
Actually I have a qsn that is the esp board is reliable?In this project if the esp board fails we can't control manually
@@chandanbalsamanta5972 add another two switch to the relay
@@techguyz5916 Lets Assume We have a two way switch connected to Relay... If ESP Fails no issue... But if ESP is running in that case how would you read the switch status
@@techiesms where I can find its schematic file which I can print?
Hi Sachin, Amazing work!
You can improve the facility for this project.
If the board stops working correctly or stuck in some situations. you will completely lose your control over manual too.
The only solution is a two-way switch. In the case of device failure, you have control over the manual in this case.
Can you add adafruit mqtt library, and chane code according? Ubidots only 30 day free, It is not logical to pay $ 50 a month for a DIY home automation system
Who's those guys which dislike to video, Kaha se aate h ye log. BTW bro your hard work is appreciable Sachi dil se. Love you😘😘😘😘😘😘😘
you say this because u may be happy with this but there are people who know to do better.
bhaiya ek he to dil hai kitni baar jitogey
😍😍😍😍😍😍
Hi can we use this for esp8266 board with same programming ?? Please tell me ASAP
Hi, During this lockdown tried out your project on a breadboard which works absolutely fine on the Hardware front. i.e if i switch off/on the light it updated the switch on Ubidots. but I am having a problem on Ubidots when i click on the switch on ubidots the light does not turn on can you suggest as to what am i doing wrong?
Sachin sir, can you ad dimmer switch circuit in this board
Video Coming soon.....
@@techiesms thank for fast reply and thank for making this type of vdo .
I want same question & some other also.
As per my request on last video! Nice work buddy! I didn't get time to work on it! U made it!
Now just share it with others
@@techiesms As per my request on the last video! Nice work buddy! U made it.
But make detail video to understand its codding also.
And make it for 8 realy & 2 dimmer for fan along with Led display with some more sensor data with date & time.
And I want to thanx for your Hard work.
bro i need atleat 8 relays per board ,how can i do it with this method?
Yup the kind of project i was looking forward too..in case we need to change the parts then how to do without resoldering the pcb?
Sir merchandise mai konsa pcb choose karu....yeh wale pcb k liye...muje home automation k liye chaiye
This is out of stock now
@@techiesms so cash back kab tak karoge muje?.....maine merchandise sirf pcb k liye liya tha
@techiesms can you show how to connect with main wire. Because i am bit confused with the connection into the switch board.
Can we add more switch to it for example if I want to automate my all home appliances can we do it using PCF8574 GPIO Extender ?
how can we use analog-multiplexer in this project to monitor the different type of sensor output in the ubidots dashboard,
great project thank you
but I hope you teach us how can integrate ESP with Google assistant without ifttt using Google console
Hey @techisms
Can we control it without the help of Ubidots?
so that we can use it with our custom designed app or our custom designed web browser...
Hi friend, you are just amazing. We love your work. You are king of IOT
Concept is awesome. But Ubidots plateform cost is to high. Better is if we do on sinric, and if we are using Alexa that makes everything easy. With voice and mobile control also
excellenet!
How do you get a feedback that the load is off "even if turned off from external source"?
Best video I have ever seen for home automation on RUclips love ur videos very much 😍
Thanks man
Now just share video to share knowledge
@@techiesms yeah for sure 🤟
Feeling Great to see this. Your Regular Follower from Gujarat 🔥
which shipping method are you using for your JLCPCB order ??
bro i can't find the pcb in your merchandise list
Is this work when esp is damaged and works the switch as normal switch
Hello sir..
Well after ordering all th necessary components fr home automation and assembling them i connected it to my bed room.... For a test run so that i cud then order ur Pcb desgin through JLCPCB... Nd do a permanent assembly...... Although it works absolutely fine bt.. Sometimes it does not connect nd i have to cut the power nd restart the circuit again...
Can u tell y this is happening
plz tell me if there will be any changes in coding (for any project) wether we use "Node MCU esp8266" OR esp32.... tHANKZ IN ADVANCE
Codes will be same but change board in Arduino ide
@@orbitalweapon7538 Ok thanks!!!
@@orbitalweapon7538 will it work fine
@@ansarakmalakmaleijaz3839 yes
Nice...but if any failure in node mcu board how to control the appliances using manual switch....
So I think 2way switch config is better....
Hi
I have produced the gerber file esp 32 does not fit exactly the pins on the bottom does not fit this gerber file is correct
please inform me
Awesome home automation
i already order but some components not available in KSA
Can I get pcb and code for the same
This is for a particular board. In my house there are so many board. How can I control them from a single device
Awesome video sir. I try to make for my IT lab. 😇😇😇
Do share the video with me after installing
Okk sir
Hi ... how much ampere or watts this project can stand
What is that SW1 and when I try to export the greber file it shows incomplete connections.
Sir please let me know instead of ubidots , can we use blynk app
Yes you can
I need this pcb with 16 Chanel relay (file) can you redesign for us
not possible with this buz we use feedback from switch
you can use maximum 7 channel relays in this design.
Hi.. cool video always wanted to something similar.. Can you please tell me if switch is off can we still turn on the bulb using phone? And does it also support alexa?
Yes we can
Sir instead of ubidots can i use adafruit for this
Nice work , but you have a little problem here .. what if your board suddenly crashed !?
Can you control your loads manually ??
Why relay flickers while powering/booting esp32? Pins goes high and low during boot.
Need solution please!
What is the max load ofeach relay?
Bro why can't we achieve these features with esp8266 ?
I want to setup 4-5 boards for 4-5 rooms in my house but esp32 is x2 than esp8266. So please cann you tell me how can i get these features with esp8266 ?
i have designed same home automation project of internet and manual automation with feedback, i have designed this with nodemcu...
i have changed the defined pins n uploaded the program, after uploading the program the relays are trigerring automatically with some time delay......
will u tell me wt is the error??
Can you please tell me how can I join multiple number of these boards to one smart hub which will finally connect to alexa and wifi-router?
Hey Bro, can you make a device which can start and restart a pc by voice command using node mcu or esp32 board. I have made one it's functional too. But coding and disign is very crude.
I want same question & some other also.
Can I control this by Google home app after integrated with Google assistant?
Connection of 24×7 with the electrical supply may harm the supply controller or not
This project is running in my office since 6 months and I didn’t face any problem yet
Hello. Can I purchase all component from
You ? Wat about the application can we have a customised one ? Thanks
Can you make fan switch with regulate fan speed ?
Dear,
I have 4ch relay which was purchased from banggood and also nodemcu.
I would like to use it with both app and physical switch,
Can u please guide me to do so.
Thanks
Hey bro, i have a doubt regarding this
If we want to control a fan with a regulator then it should be having variable potential so will we do that?
can we use blynk instead of ubidot
What is the cost to use ubidots system in our project?
It is free or charge after some time?
Please help about that.
Thanks.
Alot hardwork and time is needed for such amazing things. Alot frustrating result arises during total process.
bro, what was the disadvantage of using two way switches in your last project?
hi bro . plzz tell me how to program 2 nodemcu . me ak home Automation bana rha hn . but mjhy us me 2 dimmer ki requirement hy .
agr ap mjhy bta skty hy ka 2 dimmer kesy bana ga
me na arduino per banaya hy . but ak time per ak hi chal rha hy . 2no ak sath nhi chal rhy. agr me chalta hn to wo bilink krna lg jata hy . plzz help us
The best innovative project on your channel brother ..keep it up bro
Really a nice project.
But in esp8266 there is watchdog reset .
Hope so you resolve that.
Waiting for the reply.
Hello, I just tried this project and getting the same WDT error. Did you manage to fix it? Thanks Nik
How to get this full setup (pcb with components) , and price of this setup... plz reply me . I MUST WAIT YOUR REPLY
Can we add timer function for it?
How many other relay can be use
Yes it's a perfect automation system.. Congratulations..
Thanks man
Now just share video and share knowledge
Can attached ttp223 touch sensor instead switch
Can i use nodemcu instead of esp32
Sir, i've done your project but there's a problem, the LED kept on blinking continuously and it won't stable and won't connect to the internet either, i've tried to contact you through whatsapp, but you never replied. Can you help with this problem.?
You are a legend bro... love your work...
Hi, could I do this with "My biggest Home Automation project using ESP32 | IoT Projects | ESP32 Projects | Ubidots | LCSC"?
Four devices is not enough :(
can u add IR receiver for controlling it by a remote...................
Sir by keeping it in our houses, will there be any variation in the electricity bill.. If yes, then by how much?? Pls reply i am so close to making it
Can i use esp8266 instead of esp 32 dev board???
Hello sir, can you help me out with a project which is slightly different from your project
This is great
But it gets expensive due to the shipping charges of PCB through JLCPCB
Can we get an alternative to that
Like someone who can make PCBs locally or with low shipping cost
Thanks again
Pcb way
What will happen in condition, if ESP32 POWER IS LOST?
Where to buy the slider switch
what does the buzzer do?
Does this require a App.
Anything for iPhone.
Nice Video though.
hi sir u have tryed your project but my board is not connecting to wifi plz help
Is this possible to bild with nodemcu?
@techiesms sir if you don't mind ,please add in this project with ssid and pasword feature over the air.
I want same question & some other also.
i watch all videos on noded mcu with 4 channel relay and tryed it ....plz sir
Can we do it with node mcu
Can I use ESP8266 instead of ESP-82?
Plz reply!
Sir switches ko directly esp board se kese connect kr skte h, board fukega ni?
Switch Ko as a sensor use Kiya h
Usme se AC current nai flow ho Raha h. Dhyan se dekho circuit diagram
@@techiesms but sir I'm trying to contact it with the mains jo switch board hote h ghar m light,fan etc k liye or usme to ac hi hoga na switches m to uska koi solution btayie please
Are Tum video dhyan se dekho
Switch mese saare connections nikal diye h and then switch ko direct esp32 me connect kiya h
Okk i get it now😅
and thanks for replying 😁
Pls reply Can I use nodemcu and realy module and connect them.
No you can’t
Sir I have using water tank level transmitter for measuring the tank level. The transmitter output is 1 to 5 V variable
Means
1V need to set 0%
2V need to set 25%
3V need to set 50%
4V need to set 75%
5V need to set 100%
Can you make gauging display via blynk app with modemcu
Please make code for me
Where did the relays get the power from?
They get +5 v directly from the power supply and the fund is provided through transistor
Hi Gerber file says incomplete connections
Does it have any problem
Or i just need to skip that error
Ask him the question in WhatsApp by using the no. Mentioned in the description.
Excellent bro waiting for this tq so much. All the best 4r Ur coming videos
Instead of ubidots can we use blynk app ???
Just stick around with this channel
I’ll be uploading that soon.....
There is a problem with my NodeMCU ESP8266 CP2102 board.....
esptool.fatalerror: Failed to connect esp8266: Timed out waiting for packet header.
This error occurred in Arduino IDE software
Plz help me find solution for this error...
Thankz in advance!!!!
awesome sir my only 1 query is can we change wifi name and password without connecting computer can it is possible pls reply i m waiting
Hi,Sachin please make video on network topology in which we can intetconnect "n" numbers of esp8266 in different configuration like star toplogy or mesh topology.
The pcb ordered from your website will come with solderd components or just the pcb??
Just PCB
Nice project, I tried it but after uploading the code the esp32 reset, again and again, the server connection with ubidots was successfully done but board reset again and again continuously.
Same here mate. Please let me know if you find a solution. I keep getting Watchdog errors
@@nikhilpereira81 @askash sonani i have maked every thing but the relays turn on and off quickly and continuously i do not know why can u please advice
Awesome bro.... I followed your procedure but Internet connection not stable.... unable to control in internet... If connected with internet means, in next 3 to 5 secs disconnecting.... may i know where will be the problem?
Can I control this light from my home and light are installed in my office?
Yes
Can you do something about fan and its speed control...
Bhai maine merchandise purchase kiya tha site se... payment bhi ho chuka hai.....bt meko delivery kab tak milegi uska koi notification nahi aaya
Can this device handle 2000w