Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
Sure, everybody has those bearings and iron brackets lying around in the garage. That’s much better than buying a complete tool at the same cost of the independent parts so you can “make your own.”
Been wanting to make my own rollers for bike training inside... was gonna use this method and make 3 large diameter dowels... Do you think if I used this method would I need a metal rod to go the whole way through? As I was initially gonna use pvc pipe and just put some equally spaced "cookies" of wood to give the 3 inch diameter pvc pipe some structural support on inside...but if just get some 4x4 lumber and trim it down to the diameter I want...maybe I can save some money on pvc pipe... Thoughts?
Nice simple method. But one question - how would you make repeated precise dowels of a set diameter? Trial and error and lots of measurements with a set of calipers?
I like your setup very much. I think however it would have been easier to set the bar perpendicular to the apex of the blade and run the sled laterally.
![Conical poles of various lengths and thicknesses / round wooden bar multi-jig [Woodworking DIY]](http://i.ytimg.com/vi/GmBOpBKv15A/mqdefault.jpg)
Terrific idea! Thanks so much for sharing!
اكثر من رائع اتمنا لك التوفيق وشكرا على الفكرة👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Absolutely brilliant!
Magnífico, parabéns.
great idea! thank you for sharing!
I am amazed at how you look at the world. Thank you for sharing it with us.
It's just mindblowing how you thinked at this. Amazing!
Ótimo projeto! 👍
Great idea. This will be my next project. 고맙습니다.
Really cool! A dust collection box would also be super easy to add to this design.
Очень хорошая идея!!!!👍👍👍👏👏👏
Genial!! Moltes gràcies!!👏👏👏
Very useful & nice jig
Que buena idea. Gracias por tus vídeos 👍
Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
What made a woodworker unique is your imagination. Good Job!
Хотя идея не нова, твой вариант мне очень понравился! Удачи в Новом Году!
Суперово.Просто і доступно.Лайк і вподобайка.
Nicely done J! Very easy jig to make and gets the job done! 👍👍😉😉
Very clever, well done
This is Awesome and Very good your Jig 👍😎
Excelente aporte amigo.
Saludos cordiales desde Reynosa México!!!
Nice design!
Я и говорю: проще купить готовые черенки. В разы проще и дешеале.
Great idea. Thanks
i love it, brilliant!
As alway 👍, this jig is perhaps a good idea and easy to build.
I should try it !
very good idea..........woderful........
Fenomenal, me ha encantado mucho, gracias por esta buena idea
Excellent and simple
Excelente! Congratulations friend
Cool little jig. We shared this video on our homemade tools forum this week 😎
Saya sangat terkesan. Sempurna hasilnya tapi simpel cara membuatnya. Terima kasih atas ilmunya
Really amazing work, man! Beautiful! 😃
Stay safe there with your family! 🖖😊
Bastante interessante, parabéns.
Nice jig!
Merci pour le partage.
Meilleurs vœux pour cette nouvelle année.
Salutations de France
🇨🇵🇰🇷
super idée👍👍👍
Gracias me enseñaste algo muy bueno.perfecto su video muy instructivo.
You are a genius
Fantastic job. The only thing I would change would be inserts in place of the wingnuts. I hate wingnuts!
Sure, everybody has those bearings and iron brackets lying around in the garage. That’s much better than buying a complete tool at the same cost of the independent parts so you can “make your own.”
Parabéns pelo projeto achei mais simples e mais fácil de aprender 🤩
brilliant!
Nice! This video reminds me that I've got a brand new Jet Mini Lathe sitting in the garage begging to be used for something. 😀
Great idea
Very clever.
Excelente!
好厲害
O melhor que já vi , perfeito.
You are the master of the tablesaw!!! Great video!
Very nice 👍
Oh! Good job and qualt
Genial!
Muy buena la idea💡de una plantilla para redondear madera.
Un abrazo desde Tucumán norte de Argentina.
Hasta siempre si Dios lo permite.
magnifico trabajo
bel bastoncino, bravo geppetto
Been wanting to make my own rollers for bike training inside... was gonna use this method and make 3 large diameter dowels...
Do you think if I used this method would I need a metal rod to go the whole way through? As I was initially gonna use pvc pipe and just put some equally spaced "cookies" of wood to give the 3 inch diameter pvc pipe some structural support on inside...but if just get some 4x4 lumber and trim it down to the diameter I want...maybe I can save some money on pvc pipe...
Thoughts?
Congratulations on the RUclips channel. Contains very interesting material about joinery.
Muy bueno,👍
onu düşünebilmek. helal olsun.
Хороший вариант, если нет токарного станка! 👍
Muito bom gostei dmais obrigado😀👍
By raising up one side of the pillow blocks you could get tapered legs. 👍 😎
Fabulous...
Esse eu vou fazer. Muito obrigado
Excelente trabajo no se necesita torno pero igual hay que tener una buena cierra de banco así que no es nada fácil tampoco!!
Beautiful
Great idea and it does a beautiful job. I always enjoy your content. I think I’ll be building that thanks for sharing
Hola. Cuáles son las medidas. Está muy bueno.
Brilliantly
Ho come l'impressione che sia più facile o conveniente costruire un tornio 🙂
Top demais
Very nice thought out jig simple but very effective at producing round spindles of various lengths and thickness take care 😀👍
Excelente precisão da ferramenta, gostei muito do projeto porque é simples e bem funcional... Forte abraço ... 🛠️👍🏼
Very cool and serendipitous, I just got commissioned to make some jyo do staffs. I am going to change my plans. thanks
Молодец! Но это только для прямых изделий. А как сделать конус?
Ez az eddigi leg tisztábban dolgozó , rúd készitö, amit a jutubon láttam!😉 EZ MÁR MAJDNEM ESZTERGA!! .🤣🤣🤣
Thanks!
Amazing
Thank you 👍👍👍
Thnx
perfect.
What size is are the pillow blocks you’ve used there?
Genius
Very good! If you make it adjustable, to spin at an angle, relative to the table saw, you can make tapered pieces, instead of cylindrical.
Great idea for making large diameter dowels but just trying to think of what to do with them.
@@johnroberts3723 The main use will be to make legs for furniture.
@@JoseSilveira-newhandleforYT 👍
top notch
hey brother love the channel any good Japanese tool makers you can recommend? tia, and again i love the channel! keep it up!
excelente
Now you can make a drum sand planer ..
6:50, yay!
아이디어 좋네요.!!!! 테이블쏘로 안되는게 뭔가요?????
글쎄요?
감사합니다.
Do you have part #s ? I've not see those bearing housings before. What are they called? Can I find them at Home Depot?
Nice simple method. But one question - how would you make repeated precise dowels of a set diameter? Trial and error and lots of measurements with a set of calipers?
I like your setup very much. I think however it would have been easier to set the bar perpendicular to the apex of the blade and run the sled laterally.
Ххх
👍👍👍👌👌👌👏👏👏
Sweet
Why go from two winged nuts to four? I would like to make it but I want to know if the two winged nuts were not enough, so you added two more?
Cool Idea, well done. What is the thickness of your sawblade? Looks very thick like 5mm or 6mm.
6mm
Thanks for watching sir.
Good