Great video! Have a few questions, how thick of mat can I use for cutting and Would you know how I can get the sign master software plugin to work with Corel Draw. Thanks so much
Can you PLEASE help I've had this machine and can NEVER get it to work? 1. when trying to cut, no matter what size mat I use it either spits it out or the mat start to shift, how can I prevent this? 2. is it recommended to use a mat or some sort of carrier sheet? 3. it will not read the registration marks, is there some sort of calabration that can be done? 4. when loading a smaller sheet (11x17). where exactlly should it be loaded? at thr far right under the control panel. far left or middle, or does it matter?
Is it able to cut laminated stickers? If yes, what blade do I use and what speed and pressure? How thick of laminate is ok to use? Thanks in advance for the help
I've had the evo 54 inch cutter for a few week. The BIGGEST issue I have is I cannot change the measurement units . The machine reads in millimeters and I cannot change it.
Hello. Great tutorial. Thanks for sharing,. My question is- i use the KI-375A die plotter/vinyl cutter. Will this also work w my machine? It came w the Sign Master software. Thanks!!!
If it came with your machine, then it should work. The version of SignMaster that we sell the Vinyl Systems edition, so ours only works with Vinyl Systems cutters.
i cant get my edge to contour cut i’m doing all the correct steps as you indicate in this video step-by-step and my machine scans the first mark then go to the other ones lol in it drags like an inch past the registration market in scans to happen that goes over to the other side it’s past paper and it reads up to the third one it doesn’t go back to its original spot and it fails the detection test every time
Just replied to your other comment, but we wanted to comment here as well. For assistance with your VinylSystems Edge, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you
Hi It is possible to set cutting of the piece of vinyl after finishing the task? Like i want to cut off 10 circles in one row, cut off all of it, and then make another 10 circles?
Travis explains this at 2:52. The printing is done on a separate machine, in this case it's our Canon Pixma iX6820 inkjet printer. From SignMaster, send the traced image with contour marks to the printer. Once it's done printing on your heat transfer paper, you then bring it to your vinyl cutter for contour cutting. A carrier sheet (heat.press/multitackcarrier) or cutting mat (heat.press/cameomat1224) is important for this process. It holds the paper in place and keeps it from getting shredded during the contour cutting process.
For support with your Vinyl Systems machine, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you.
Hey. I am trying to to do contour cutting with my signmater pro but I don't have the option to do automatic arms. Do you think my cutter have anything to do with that I have the vevor 870 34"
QUESTION QUESTION QUESTION: I have an HP printer that can be used with heat transfers but I have a SPECIALIST Vinyl Cutter Can I still do that??? PLEASE ADVICE, THANKS.
Sorry, but the VinylSystems Specialist does not have contour cutting capabilities. For that, you'd need a cutter like the GCC Expert II LX (shown in this video), VinylSystems Edge, Silhouette Cameo, or similar machine. You can find these cutters and more at www.heatpressnation.com/collections/vinyl-cutters-vinyl-cutters/
My project is very basic I cannot get it to format . I want to know do I need additional software for creating my 30 to 40 plus logos onto a sheet to cut. I have already gotten the file Vectorized but I cannot move forward I could use some recommendation I have a new machine that I cannot use.
For this video, we used a piece of regular copy paper, printed on the Canon Pixma iX6820 (forward to 2:56). But to put on a t-shirt, you'll want to use heat transfer paper. You can print on heat transfer paper with nearly any decent home/office printer. For more info on heat transfer paper, check out this video: ruclips.net/video/7S5i1gauywU/видео.html *We just updated the description to this video with links to all the products used in this video, including the printer.
No, not every cutter can do this. You're correct - the cutter must have a laser sensor to detect the printed contour marks. The Vinyl Systems Edge & Evo cutters can do this, as well as the Silhouette and Graphtec brands of cutters. All GCC cutters with the "LX" indication can also contour cut.
i am trying to cut but in the wizard there is on the cut view it puts a like water mark gray lines that are actually cutting into the image what do i do?
How can I get a contour cut around an entire graphic on Signmaster? My only options seems to be each individual component of the graphic, only want the outline.
When contour cutting paper of any kind (heat transfer paper included), we always recommend using a cutting mat or carrier sheet. This keeps the paper together while it's being cut/
If you have a Vinyl Systems Specialist, this is normal. That cutter does not support ARMS or contour cutting. If you have an Edge or Evo cutter, please reach out to our Technical Support Department for assistance. They are available Monday - Friday, 7:30am - 3:00pm PT, at (800)215-0894. We offer free lifetime technical support for all of our products.
Sure, as long as it's sturdy enough to not crumple when rolled through the cutter. We really like using the Silhouette cutting mats - www.heatpressnation.com/products/silhouette-cameo-cutting-mat-12-x-24?_pos=6&_sid=ccc7e854b&_ss=r
I have the same package i just got it in the mail. Im having trouble with the registration marks, its wont go past the 3rd registration mark. It stops reading on the fourth and it says to re start. Where can i get some help?
So sorry for the late reply! We provide free technical support for all of our products. If you ever have an issue in the future, please visit support.heatpressnation.com.
Depends on the max cutting width of the cutter. We have Vinyl Systems cutters that range in size from 24" up to 52". You'll want to keep the registration marks within the max cutting width of the cutter, so they can be read by the laser.
has this worked for anybody??? everything leading up to contour cutting has been successful. but this is bad.. maybe some steps need to be added but my scanner isnt reading anything...... PLEASE HELP
Please reach out to our MyExpert Support Team at support.heatpressnation.com for help and troubleshooting your Vinyl Systems cutter. A couple general tips: - Bright lights can affect the laser's ability to read the contour marks - Load the printed sheet in the exact orientation as shown in SignMaster - Print scale should be 1:1 / 100%. Anything else may cause issues with registering. - If mirroring the image, do so in SignMaster. Do not allow the printer to perform mirroring.
These are created by the cutting software and are sent to print with the image. If your vinyl cutter has contour cut (sometimes called print & cut) capabilities, you should have the option to add the registration marks in the included cutting software.
@@HeatPressNation Sorry, my bad. I meant my cutter won't scan and just proceeds to cutting. I tried to follow this video, but I think I'm missing something. What could be the problem T-T
@@HeatPressNation idk what to tell you but it does contour cut I just don’t know how to do it great. I send videos to you guys on Instagram showing ya that the specialist does contour cut. My ig is @Mob_Icey
This video shows how to setup and connect your Vinyl Systems Edge cutter to your computer: ruclips.net/video/tK9xf5FTUWc/видео.html We also have videos for setting up the Specialist and Evo here on this playlist: ruclips.net/p/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X
- Make sure your image is in a vector format. Raster images will not cut. - Delete any elements that you do not want cut. Select only the vector graphic you want to send. Those are the two most common solutions. If you're still having trouble with your Vinyl Systems cutter, you can submit a request for technical support at heatpressnation.com/technical or call (800)215-0894.
Vectorization & Contour Cutting can only be done on SignMaster Pro. SignMaster Basic is for the Specialist vinyl cutter, which cannot contour cut. So those features are not included in the Basic version of the program.
Vector formats are usually .EPS, .SVG, .AI, and sometimes .PDF. These are graphics that are made up of lots of shapes. Raster images are those made up of lots of pixels - like .JPEG, .PNG, etc. Because vector graphics are made up of shapes, you can stretch them, shrink them, and they will keep their perfect definition. (If you stretch out a JPEG, it'll get all nasty and pixelated.) SignMaster Pro allows you to convert raster images (like JPEG) into vector images (like SVG).
People don't waste your money on this when you do have a problem they tell you it'll be one or two business days before we can help you but yet they want you to spend $700 on one of their machines
I'm sorry if you've had an issue with any of our products. We try our very best to respond to all email requests within one business day. For immediate issues, our team is available from Monday through Friday, 7:30am to 3:00pm PT at (800)215-0894 [option 3 for support]. We offer free lifetime technical support for all of our products.
You guys definelty need to find another program to use. There is no videos or tutorials from either you or the manufacturer and how to do anything with this software beyond basic stuff. If you go and try to find answers from the companys FB page it just shows many people over the years who have asked questions and never gotten any answers. This software seems to be a ripoff of Vinyl Master which is the closest thing to it but still different enough to not show how to do basic or more advanced things. Like, does this software offer an "Eraser" icon? Does it allow for masking?
We could definitely use some more tutorials for this program. Here is a playlist of all our current videos: ruclips.net/p/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X SignMaster is actually developed by the same software company that makes Vinyl Master, which is why they're both very similar.
@@HeatPressNation but different enough that none of the more advanced techniques from Vinyl master work on Sign master. As for "your" videos As I stated above, real basic stuff being shown. Just enough to get someone started.
You may need to calibrate your vinyl cutter's contour cutting settings. For more information, please get in contact with our Technical Support team at heat.press/support
Excellent it helped me to cut without problems Thank you very much
Great video! Have a few questions, how thick of mat can I use for cutting and Would you know how I can get the sign master software plugin to work with Corel Draw. Thanks so much
Where did you get the carrier sheet? I don't see any on your website.
Can you PLEASE help I've had this machine and can NEVER get it to work?
1. when trying to cut, no matter what size mat I use it either spits it out or the mat start to shift, how can I prevent this?
2. is it recommended to use a mat or some sort of carrier sheet?
3. it will not read the registration marks, is there some sort of calabration that can be done?
4. when loading a smaller sheet (11x17). where exactlly should it be loaded? at thr far right under the control panel. far left or middle, or does it matter?
Is it able to cut laminated stickers? If yes, what blade do I use and what speed and pressure? How thick of laminate is ok to use? Thanks in advance for the help
Yes, just adjust the force you should be good
any chance you do any customer feedback on how to get a machine working properly?:)
It seems impossible to find any information anywhere on how to calibrate these machines. Nothing on optical scanners, only laser.
I've had the evo 54 inch cutter for a few week. The BIGGEST issue I have is I cannot change the measurement units . The machine reads in millimeters and I cannot change it.
Hello. Great tutorial. Thanks for sharing,. My question is- i use the KI-375A die plotter/vinyl cutter. Will this also work w my machine? It came w the Sign Master software. Thanks!!!
If it came with your machine, then it should work. The version of SignMaster that we sell the Vinyl Systems edition, so ours only works with Vinyl Systems cutters.
GOOD MORNING I'M A BEGINNER AND I HAVE A QUESTION ON THE KI 720 IS TH A WAY TO CREATE SHAPES OFF THE SOFTWARE
how can I remove the offset of the clipping along the contour, I have an offset to the right
i cant get my edge to contour cut i’m doing all the correct steps as you indicate in this video step-by-step and my machine scans the first mark then go to the other ones lol in it drags like an inch past the registration market in scans to happen that goes over to the other side it’s past paper and it reads up to the third one it doesn’t go back to its original spot and it fails the detection test every time
Just replied to your other comment, but we wanted to comment here as well. For assistance with your VinylSystems Edge, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you
Hi, I don’t have the “include full bounds option” how do I get it to show up? Thanks...
hi,how to edit page marks to cutting page?i cant find this features
Can you do it with a sk-375
Hi
It is possible to set cutting of the piece of vinyl after finishing the task? Like i want to cut off 10 circles in one row, cut off all of it, and then make another 10 circles?
How do I get the white paper and clear paper to print my design out what are those steps to get the logo printed out in color
Travis explains this at 2:52. The printing is done on a separate machine, in this case it's our Canon Pixma iX6820 inkjet printer. From SignMaster, send the traced image with contour marks to the printer. Once it's done printing on your heat transfer paper, you then bring it to your vinyl cutter for contour cutting.
A carrier sheet (heat.press/multitackcarrier) or cutting mat (heat.press/cameomat1224) is important for this process. It holds the paper in place and keeps it from getting shredded during the contour cutting process.
My old computer just died. I put my signmaster serial on my new one and it says that's currently being use on another computer? What should I do now?
For support with your Vinyl Systems machine, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. They are available Monday - Friday, from 7:30am-3:00pm PT and will be happy to assist you.
Hey. I am trying to to do contour cutting with my signmater pro but I don't have the option to do automatic arms. Do you think my cutter have anything to do with that I have the vevor 870 34"
Hi David! It may be. We recommend reaching out to your supplier for assistance.
hello can we do two different force cut in one cut. like cut 40g 1st then after that 80g.
You can do multiple passes, but only at the same pressure.
QUESTION QUESTION QUESTION:
I have an HP printer that can be used with heat transfers but I have a SPECIALIST Vinyl Cutter
Can I still do that??? PLEASE ADVICE, THANKS.
Sorry, but the VinylSystems Specialist does not have contour cutting capabilities. For that, you'd need a cutter like the GCC Expert II LX (shown in this video), VinylSystems Edge, Silhouette Cameo, or similar machine. You can find these cutters and more at www.heatpressnation.com/collections/vinyl-cutters-vinyl-cutters/
@@HeatPressNation can it be any of the silhouette?
Bonjour je voudrais savoir quel papier utiliser pour avoir un résultat comme ça avec l’imprimante
In the video you say carrier sheet or cutting mat. Can you use the Silhouette Cameo mat?
Yes, we use the Silhouette cutting mats all the time. :)
@@HeatPressNation when you use the cutting mat do you change the force you might normally use without the mat?
Thanks
My project is very basic I cannot get it to format . I want to know do I need additional software for creating my 30 to 40 plus logos onto a sheet to cut. I have already gotten the file Vectorized but I cannot move forward I could use some recommendation I have a new machine that I cannot use.
Wait How do you get color on it? Also When you put it in the printer is that Vinyl like siser weed?
For this video, we used a piece of regular copy paper, printed on the Canon Pixma iX6820 (forward to 2:56). But to put on a t-shirt, you'll want to use heat transfer paper. You can print on heat transfer paper with nearly any decent home/office printer. For more info on heat transfer paper, check out this video: ruclips.net/video/7S5i1gauywU/видео.html
*We just updated the description to this video with links to all the products used in this video, including the printer.
Does every cutter machine can do such a thing? or it has to have laser and sensors and shits like that?
No, not every cutter can do this. You're correct - the cutter must have a laser sensor to detect the printed contour marks. The Vinyl Systems Edge & Evo cutters can do this, as well as the Silhouette and Graphtec brands of cutters. All GCC cutters with the "LX" indication can also contour cut.
Please do you have tutorial on easycut software... Kindly leave a link. Thank you
We don't have any tutorials on EasyCut software. Sorry about that.
"Selected Objects" is greyed out for me and there is no Include "Full Bonds" option either.
You did not select the item you are attempting to contour cut before selecting the contour cut wizard.
i am trying to cut but in the wizard there is on the cut view it puts a like water mark gray lines that are actually cutting into the image what do i do?
Buy a different brand
Hi which version I need for liyu cutter?
How can I get a contour cut around an entire graphic on Signmaster? My only options seems to be each individual component of the graphic, only want the outline.
Thanks for ur good explanation,I love this and understood every details 🙏👏👏
Thanks
if you are printing on heat transfer do you need to use the carrier sheet?
When contour cutting paper of any kind (heat transfer paper included), we always recommend using a cutting mat or carrier sheet. This keeps the paper together while it's being cut/
My automatic ARMS button is disabled, what can be the reason. please advice ?
If you have a Vinyl Systems Specialist, this is normal. That cutter does not support ARMS or contour cutting. If you have an Edge or Evo cutter, please reach out to our Technical Support Department for assistance. They are available Monday - Friday, 7:30am - 3:00pm PT, at (800)215-0894. We offer free lifetime technical support for all of our products.
Can any type of carrier sheet be used?
Sure, as long as it's sturdy enough to not crumple when rolled through the cutter. We really like using the Silhouette cutting mats - www.heatpressnation.com/products/silhouette-cameo-cutting-mat-12-x-24?_pos=6&_sid=ccc7e854b&_ss=r
Thanks so much!
Is this cutter the same as cuyi?
I have the same package i just got it in the mail. Im having trouble with the registration marks, its wont go past the 3rd registration mark. It stops reading on the fourth and it says to re start. Where can i get some help?
So sorry for the late reply!
We provide free technical support for all of our products. If you ever have an issue in the future, please visit support.heatpressnation.com.
Can I cut vinyl with this program and cutter?
Did they ever reply to you?
@@The_K_Project yes you can.
can you contour cut using a seiki cutter using vinyl master?
The version of SignMaster that we sell is only compatible with Vinyl Systems cutters.
Hi! Can I use a normal non sticker paper to test the results as shown in the video???
Definitely! When testing and calibrating our contour cutting, we'll use cardstock or regular paper.
HeatPressNation what kind of paper are you using
is that transfer tape your using
I wanted to know the same thing.
how large of an image can signmaster pro print and cut/contour cut?
Depends on the max cutting width of the cutter. We have Vinyl Systems cutters that range in size from 24" up to 52". You'll want to keep the registration marks within the max cutting width of the cutter, so they can be read by the laser.
@@HeatPressNation Can you make a video for a large image? on paper 11x17 or 13x19
Trust me don't waste your money
has this worked for anybody??? everything leading up to contour cutting has been successful.
but this is bad.. maybe some steps need to be added but my scanner isnt reading anything......
PLEASE HELP
Please reach out to our MyExpert Support Team at support.heatpressnation.com for help and troubleshooting your Vinyl Systems cutter.
A couple general tips:
- Bright lights can affect the laser's ability to read the contour marks
- Load the printed sheet in the exact orientation as shown in SignMaster
- Print scale should be 1:1 / 100%. Anything else may cause issues with registering.
- If mirroring the image, do so in SignMaster. Do not allow the printer to perform mirroring.
How did you get the marks in each corner?
These are created by the cutting software and are sent to print with the image. If your vinyl cutter has contour cut (sometimes called print & cut) capabilities, you should have the option to add the registration marks in the included cutting software.
kindly show us Contour Cutting with Anycut Pro Tutorial
Why won't it scan the registration marks? It just proceeds to cutting
You can see the machine scanning the registration marks at about 3:56-4:17.
@@HeatPressNation Sorry, my bad. I meant my cutter won't scan and just proceeds to cutting. I tried to follow this video, but I think I'm missing something. What could be the problem T-T
On the specialist it don’t show like this
The Specialist does not support contour cutting. So it will not have these features.
@@HeatPressNation idk what to tell you but it does contour cut I just don’t know how to do it great. I send videos to you guys on Instagram showing ya that the specialist does contour cut. My ig is @Mob_Icey
Thank u
Hello, what type of vinyl is that?
This was done on plain copy paper, just to illustrate the process.
@@HeatPressNation what’s the clear paper?
@@onettawatt3871 looks like regular contact paper
Can I use that program on specialist cutter or no
Yes, you definitely can. However, since the Specialist does not have an optical eye for contour cutting, that feature will not work.
Ok thank u we decided on the edge 28 hopefully we can order it next week excited already bought vinyl lol just need the cutter
Awesome! Hope you love it =)
How to remove the line appearing on the edges during printing
Might be an issue with the printer. Can you provide some more details?
Please help! How to make double cut per line??
Send to cutter -> Cutter Control Tab -> Passes
Each pass is how many times it'll be cut. Set it to 2 for a double cut, 3 for triple, etc.
Is this the cutter from ebay
I don't believe so. This cutter is not currently available on eBay.
How do you detect the USB
This video shows how to setup and connect your Vinyl Systems Edge cutter to your computer: ruclips.net/video/tK9xf5FTUWc/видео.html
We also have videos for setting up the Specialist and Evo here on this playlist: ruclips.net/p/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X
In all my images he tells me that there is nothing to cut. What I can do?
- Make sure your image is in a vector format. Raster images will not cut.
- Delete any elements that you do not want cut. Select only the vector graphic you want to send.
Those are the two most common solutions. If you're still having trouble with your Vinyl Systems cutter, you can submit a request for technical support at heatpressnation.com/technical or call (800)215-0894.
its about dam time lol
Thankyou!!!
Is it a difference when using signmaster basic?
Or can this only be done on signmaster pro??
Vectorization & Contour Cutting can only be done on SignMaster Pro. SignMaster Basic is for the Specialist vinyl cutter, which cannot contour cut. So those features are not included in the Basic version of the program.
How much for the cutter
bruh go to their web site don't be one of those customers who walk in to a store and wants to know what everything cost before looking at the label
How do you mirror the image
Fast forward to 3:02 to see how to mirror an object
@@HeatPressNation I missed it thank you. Ur such an awesome company
How can I write in Arabic inside the program
Sorry, but SignMaster does not support Arabic text. It works in English and Chinese only.
What’s vector format and how do I find it?
Vector formats are usually .EPS, .SVG, .AI, and sometimes .PDF. These are graphics that are made up of lots of shapes. Raster images are those made up of lots of pixels - like .JPEG, .PNG, etc.
Because vector graphics are made up of shapes, you can stretch them, shrink them, and they will keep their perfect definition. (If you stretch out a JPEG, it'll get all nasty and pixelated.)
SignMaster Pro allows you to convert raster images (like JPEG) into vector images (like SVG).
This is so annoying. LOL it doesn't give me any of those options. Sign Master just had an update and for some reason it doesn't want to work for me
If you're having issues with SignMaster, please feel free to reach out to our Technical Support department at (800)215-0894.
Good but too fast to take notes.
People don't waste your money on this when you do have a problem they tell you it'll be one or two business days before we can help you but yet they want you to spend $700 on one of their machines
I'm sorry if you've had an issue with any of our products. We try our very best to respond to all email requests within one business day. For immediate issues, our team is available from Monday through Friday, 7:30am to 3:00pm PT at (800)215-0894 [option 3 for support]. We offer free lifetime technical support for all of our products.
Looks like is the same cutter that Vevor sells. Often it's made by one company and put different brands on them.
You guys definelty need to find another program to use. There is no videos or tutorials from either you or the manufacturer and how to do anything with this software beyond basic stuff. If you go and try to find answers from the companys FB page it just shows many people over the years who have asked questions and never gotten any answers. This software seems to be a ripoff of Vinyl Master which is the closest thing to it but still different enough to not show how to do basic or more advanced things.
Like, does this software offer an "Eraser" icon?
Does it allow for masking?
We could definitely use some more tutorials for this program. Here is a playlist of all our current videos: ruclips.net/p/PLY9aNS49KtIyNYBeKYRvDFxmV17aD6Q6X
SignMaster is actually developed by the same software company that makes Vinyl Master, which is why they're both very similar.
@@HeatPressNation but different enough that none of the more advanced techniques from Vinyl master work on Sign master. As for "your" videos
As I stated above, real basic stuff being shown. Just enough to get someone started.
I agree. The lack of resources is horrible. I'm starting to regret this purchase. They really need to put out practical videos. The manual is useless.
9 months later and I agree with BOTH of you guys! I’m at a halt trying to get my contour laser to detect
This crap sucks! bought specialis 28" few months ago.. doesn't work for contour cutting .. worst $450 investment
So sorry you feel that way. All of our cutters have their features and specifications listed.
how to avoid misaligned cutting?
You may need to calibrate your vinyl cutter's contour cutting settings. For more information, please get in contact with our Technical Support team at heat.press/support
Does this software work with Mac ?
No, SignMaster & SignMaster Pro will only work with Windows computers.
@@HeatPressNation ok forsure man thank you for the response!