I use this weather station and i am really happy with it. the only problem with the outdoor sensor is that when the sun reaches the wall that's mounted on it starts becoming inaccurate even though it's in a shady area but trying to solve the problem by somehow making a shield for it.
Hello ! I was wondering if this has happend to you.... i Changed the batteries ( not the ones included in the box) and after a couple of days the temperature on the screen for outdoors goes blank . The distance of the exterior isnt that far away 3 meters and there is only one window in between. I tried to sychronize them when it goes blank but doesnt do anything... i have to take the plug out and the batteries inorder to show the exterior temperature again,,,, Has anyone faced this problem ?
You should set the starting weather condition by holding down the snooze button for a few seconds, the station will then calculate the weather forecast taking into account the pressure variation.
Isn't the forecast meant to show what weather it is or will be? Why do we have to set it then? When the Dcf signal is on, the clock should get the time automatically but I see you have to set it yourself?
Hello… can someone help me? For the outdoor temperature it shows me ch1-2-3 it switch automaticaly every 3 seconds. I dont know how to keep it on number 1
You have to changed it on the out sensor it's located where you put the batteries in. Take your time read it again if you have too. I had trouble at first but I figured it out.
Dobrý den nevie mi niekto poradit s meteostanicou konkretne s počasim ked vonku svieti slnko mne ukazuje zamračene , ked prši mne ukazuje slnko atd.Aj po 6 hodinach ako piše v manuali bi sa malo počasie menit automaticky podla vonkajšieho počasia prosim o radu . Dakujem
I'd love it unless it wouldn't be a TOTAL RUBBISH. Unit 1: Works OK but can't receive any data from outdoor sensor. Unit 2: Sensor can't send any data (tested in shop and I didn't realised it connected to sensor from Unit 1. Also appeared problem with back-light.
Advice 1. By inserting/replacing battery in outdoor sensor unplug PSU and remove battery from main unit for 10mins. Advice 2. Dond buy from this brand.
It matters a lot the location of the outdoor sensor my friend.. needs to be in a shadowed place without direct contact to sun or water.. i placed it in a recommended place and it shows to me mostly correct measurements..
I use this weather station and i am really happy with it. the only problem with the outdoor sensor is that when the sun reaches the wall that's mounted on it starts becoming inaccurate even though it's in a shady area but trying to solve the problem by somehow making a shield for it.
Because you showed me how to use it, you are my best friend in the whole wide world
Where does it get its forcast from?
Hello ! I was wondering if this has happend to you.... i Changed the batteries ( not the ones included in the box) and after a couple of days the temperature on the screen for outdoors goes blank . The distance of the exterior isnt that far away 3 meters and there is only one window in between. I tried to sychronize them when it goes blank but doesnt do anything... i have to take the plug out and the batteries inorder to show the exterior temperature again,,,, Has anyone faced this problem ?
Yeaap! Same here. However, thank you so much for the solution. I was that close to throw the shit on the wall!
I have the same problem..
Change the batteries of the outside sensor
Now on units sold in Germany stays a sticker: insert battery to sensor first and then into station.
Καλησπέρα. Μπορείτε να μου πείτε για ποιο λόγο στα ξαφνικά δεν μου δείχνει την εξωτερική θερμοκρασία και πως μπορώ να το διορθώσω;
can u please tell me how the forecast works? its auto? or i have to set it everyday ?
Good question, I am also interested
You should set the starting weather condition by holding down the snooze button for a few seconds, the station will then calculate the weather forecast taking into account the pressure variation.
I got the same one and I’m very happy with it ❤
4:29
two sensor already has different
1deg c, 10%dh
Isn't the forecast meant to show what weather it is or will be?
Why do we have to set it then?
When the Dcf signal is on, the clock should get the time automatically but I see you have to set it yourself?
Snooz gomb nyomvatartás nem hozza a beállítást. Mit csinálok rosszul?
Thankyou I lost he manual and they wanted me to to pay to download a new one. You have saved me sir thankyou 😊
Hello… can someone help me? For the outdoor temperature it shows me ch1-2-3 it switch automaticaly every 3 seconds. I dont know how to keep it on number 1
use the CH key.
You have to changed it on the out sensor it's located where you put the batteries in. Take your time read it again if you have too. I had trouble at first but I figured it out.
Kako da mi svetlo stoji ukljuceno uvek???
Displej ostaje uključen samo ako uređaj se napaja preko strujnog adaptera
I tada se gasi? Da li vama ostaje ukljuceno svetlo?
@@nedof1981 na kablu ostaje 24h..
Baterije pali i gasi na par sekundi.
Probacu opet. Hvala
Nazalost gasi se i kad je na kablu. Nesto nije u redu sigurno
καλησπερα ωραιο το βιντεο!θα ηθελα να ρωτησω γιατι η οθονη κλεινει?θελω να ειναι συνεχεια ανοικτη.ευχαριστουμε!
Connect the power cord will stay on all the time
If I enable the radio signal, it shows one hour later! What could be the problem?
How can keep it light on it lights for few seconds then light turn off unless its plugged
Have you got any answer?! I bought one and could not see the figures until turning on the light :( ( about only 10 sec)
@@bekesia you shoul plug it with electricity i keep it plugged
My outdoor sensor is showing wrong temperature no matter where i put it its always wrong even if i put them side by side ... and by 3°C thats a lot
Can anyone tell me how to turn off the beep sound?
που πωλειται?
Lidl
Dobrý den nevie mi niekto poradit s meteostanicou konkretne s počasim ked vonku svieti slnko mne ukazuje zamračene , ked prši mne ukazuje slnko atd.Aj po 6 hodinach ako piše v manuali bi sa malo počasie menit automaticky podla vonkajšieho počasia prosim o radu . Dakujem
I'd love it unless it wouldn't be a TOTAL RUBBISH. Unit 1: Works OK but can't receive any data from outdoor sensor. Unit 2: Sensor can't send any data (tested in shop and I didn't realised it connected to sensor from Unit 1. Also appeared problem with back-light.
What about the weather forecast? I thorough it will show me the weather outside not I need to choose the weather 😂
Advice 1. By inserting/replacing battery in outdoor sensor unplug PSU and remove battery from main unit for 10mins.
Advice 2. Dond buy from this brand.
En français svp merci
Weather forecast total rubbish. You set it up on rain and after 10 min it goes back to sunny 😂, outside still raining 2 days now.
It matters a lot the location of the outdoor sensor my friend.. needs to be in a shadowed place without direct contact to sun or water.. i placed it in a recommended place and it shows to me mostly correct measurements..
Well I am can say Sensors dont connect here 1 2 3 automatic - - C - - yup sensor also on wehater stattion it slef 0mm 7 days no conect.