Make a budget backsaw AWESOME. Total upgrade!
HTML-код
- Опубликовано: 5 фев 2025
- Make a $45 tenon saw perform like a premium tool in this complete rehab video.
More video and exclusive content: / rexkrueger
Get the Spear and Jackson tenon saw from this video: amzn.to/2zykhs6
Get the FREE Saw Handle Printout: www.rexkrueger...
Plans, t-shirts, and hoodies: www.rexkrueger....
Sign up for Fabrication First, my FREE newsletter: eepurl.com/gRhEVT
Paul Sellers sharpening video: • How to Sharpen a Woodw...
Saw Vise Build Video: • Make a saw vise from s...
Cut Smooth Curves with Flat Tools: • Hand-cut curves in woo...
Tools and Materials in this Project (affiliate):
Spear and Jackson Tenon Saw: amzn.to/2zykhs6
Same Saw, 10 inches long: amzn.to/2T5h75Y
Crown Tenon Saw: amzn.to/3fM9uek
Digital Calipers: amzn.to/35YO4WK
Tack Hammer: amzn.to/35XSrBz
(I used this for removing the set. Not the exact one I use, but a quality tool.)
Saw File: amzn.to/2LuhxOV
(Not the exact one I use, but a good tool from a quality maker. Correct size for this saw.)
Saw Nuts: amzn.to/2T4hhKZ
Saw Nuts (different source): bit.ly/2Z4daSO
Super 77 Adhesive: amzn.to/2zymSCm
Dreadnaught Half-Round File: amzn.to/2Z504oi
Large Round File: amzn.to/2Z6hykb
Minwax English Chestnut Stain: amzn.to/2Z1iGpb
Clear Shellac: amzn.to/2AtgmNB
Paste Wax: amzn.to/3dW596P
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
Wood Work for Humans Tool List (affiliate):
Stanley 12-404 Handplane: amzn.to/2TjW5mo
Honing Guide: amzn.to/2TaJEZM
Green buffing compound: amzn.to/2XuUBE2
Cheap metal/plastic hammer for plane adjusting: amzn.to/2XyE7Ln
Spade Bits: amzn.to/2U5kvML
Metal File: amzn.to/2CM985y (I don't own this one, but it looks good and gets good reviews. DOESN'T NEED A HANDLE)
My favorite file handles: amzn.to/2TPNPpr
Block Plane Iron (if you can't find a used one): amzn.to/2I6V1vh
Stanley Marking Knife: amzn.to/2Ewrxo3
Mini-Hacksaw: amzn.to/2QlJR85
Blue Kreg measuring jig: amzn.to/2QTnKYd
Blue Handled Marples Chisels: amzn.to/2tVJARY
Suizan Dozuki Handsaw: amzn.to/3abRyXB
Vaughan Ryoba Handsaw: amzn.to/2GS96M0
Glue Dispenser Bottle: amzn.to/30ltwoB
Orange F Clamps: amzn.to/2u3tp4X
Blue Painters Tape: amzn.to/35V1Bgo
Round-head Protractor: amzn.to/37fJ6oz
5 Minute Epoxy: amzn.to/37lTfjK
Dewalt Panel Saw: amzn.to/2HJqGmO
Get my woodturning book: www.rexkrueger....
Follow me on Instagram: @rexkrueger
"Can we make these better than the manufacturer did?"
ABSOLUTELY. I've worked in manufacturing for years now, and time is always the most expensive part of the process (in America). If you have a machine that can churn out beech handles, by golly you machine the dickens out of those beech handles. Touch them up with as little individual man power as possible and get those babies and ship 'em out.
That's why I love these videos where you tune up cheaper tools. By contributing your own time to the product, you can cut down on the cost significantly. Always impressed with your stuff Rex. Thanks for continuing to post great work.
I think I’ve got a dozen of those S&J saws at school, looks like my students will be rebuilding some saws! Thanks for the great content
Right on!
I think that is a great learning resource they will make use of again and again.
@@dakatone
Your icon looks like "Florida Boy Survival" w/out the beard.
How did that project go? Sounds so fun!
I've got some old tools that were cheap when I bought them 50-55 years ago. They are all rusty due to neglect and I had a BIG stroke, too. Well, I'm recovering and I'm going to make the tools recover as well. I like your term, hot rod. Yeah! I am going to do just as you say. Thanks. I cleaned up my carving chisels. They came out well. Your site has inspired me.
50-75 years from now people are going to wonder where this rare run of really good spiers and jackson saws came from 😂
Rex, I sharpened my S&J saw per your video and took it to a dovetailing class this weekend. The instructor checked out the saw (having never seen one) and told me he was really impressed with how it was set up. Thank you!
This video was actually full of really good advice . He turned a $45 saw into a saw worth at the very least $150.Excellent upgrade REX,just exce;llent.
Thank you!
@@RexKrueger You are also a great orator. Your content is pure, simple, helpful, organized, relevant, and always encouraging!!
I am not a woodworker; however, your tips and tricks have broadened my ability to fix a 100+ year old break-down, collapsible wardrobe and tidy up some of my son's monor house repairs. You have expanded my knowledge base!
Thank you for all of your help!
Except that now, today (7/25/21), that $45 price has been jacked up to $94! Jeff Bezos has got to pay for those trips somehow.
@@petereastwood7868, and on August 18th, 2021 I bought a 10" Spear & Jackson Model 5410Y Professional Tenon Saw for $38.06+ the Governor's Cut on Amazon Prime. The plate's 0.027" thick with a kerf of 0.033". Just checked and it's now $33.06 on July 22, 2022. Oh, and it has real saw handle hardware. No prying, just the proper size and shape flat blade screwdriver (I use my Chapman Gun Screw Driver Kit N0. 9600).
I am honestly lost for words. The way you teach is making me pick up an old hobby. By showing HOW. In a simple understandable way. As a Dutchman I love the cheapest way so I’m hooked!
Thank you for referring to Paul Sellers. You're the two woodworkers on RUclips I'm learning the most from. I inherited some wonderful old hand tools from my late father, and between you both, am learning what to do with them. I have no extra money now, but promise to throw some patronage your way when I can.
You should also check out Andy Rawls and Third coast craftsman
Paul Sellers, Roy Underhill, all you need!
My wife has never watched your videos but this is already her favorite youtube channel just based off the amount of money I am not spending on tools! Great video keep up the good work!
Your wife and my wife would love each other.
LOL... I found out that my wife is already one of Rex's Patrons! (She's already seen this video)
This channel is amazing! I often feel like there's a massive paywall between me and any success in woodworking because I can't get all the tools I thought I needed. Turns out it can be a lot cheaper if I just put some time on. Thank you Rex! You're a true gent.
They want you to think you need to spend thousands. You don't.
@@RexKrueger I really like woodworking and software/computers for the same reason. You start with some basic tools and you use them to make better tools and to learn how to use your tools better.
Learn, do, learn, do, learn. Your videos are simply amazing.
Also if money is tight, like it is for me look on eBay. I bought a slightly older but equally ugly spear and Jackson for £10ish delivered.
Rex thanks for the freebie. I'm loving the router plane from your plans. Well worth the money.
@@PandorasFolly generally i like computer software for a slightly different reason. the ease at which i can get products for free easily makes up for the lack of a secondhand market for a lot of newer software.
I am just putting an old wooden handle on a new blade, because it felt soo much better. These video's are what youtube is all about imho. Learning from the experience of million of hours work and multiple generations in a few minutes... I would hate to see old crafts disappear like let's say building piramids ;-) Thanx!
for the sanding on the inside and tight radius you can back the sand paper with duct tape that way cheap sand paper lasts way longer and it's easier to work
Nice tip.
One thing I can never understand is why so many woodworkers are so ready to use sandpaper, especially when a fair amount of material needs to be removed. I personally prefer to use files, rasps and rifflers. In fact one of my most popular tools is a Farrier's rasp [ designed for shaping horse's hooves ]. This two sided flat tool [ super coarse one side, coarse on the other ] is perfect for shaping wood where a fair amount of material needs to be removed. The finer work can be performed with rasp or rifflers or files of various types. My original shop teacher would not permit the use of sandpaper most of the time, and then only for a final finish and only with a sanding block. In general my own judgment is that sandpaper and emery cloth are more suited for sharpening chisels and gouges.
@@crustyoldfart - if you don't understand you should ask them directly.
This is a quality tip.
@@crustyoldfart What if I just like to use sandpaper?
As all of my tools, i found my backsaw in the secound hand shop. A bit rusty, folded back, uncomfortable handle but only 2,99€. I will make a new handle because i like making them and i like my own design. Great winter task.
Hello from Australia I have been restoring antique furniture for the past six years or so was an interesting learning curve then I came across a supplier of good pallet wood (pallets used in containers to ship windscreens and that sparked my interest in woodwork.Living off grid with a decent workshop I started building various furniture am now at the stage where I have retooled part of my workshop for wood work its videos like yours,along with the rebuilding of the old school joints that have brought me to this point and that inspired me to branch out.Thanks
I have a kinda good choice maded, all my saws i own i inheritanced or buyed for 1€ and tuned them up. I build for every saw a fully new handle i designed by my own. I made over seven prototypes till i was happy with the fit for my relativly small hands and i was statisfyed with the Design. Im really happy with my old saws😊
My grandfather kept all of his hands saw tuned very much like that. He did it with a "saw-set" and I had a tool box stolen out of my shop with his saw-set and several other of his tools in it. He would own nothing but a Disston and I still have all five that he owned...great video...
I’ve mentioned this a couple times and it’s off topic from this video but yesterday I had the occasion to use my Stanley palm plane again. Before watching your videos I wouldn’t have used it. What I was doing wasn’t really finish enough and wouldn’t be seen by anyone anyway, but having it available and set up to work properly I pulled it from my tool box just to get more time on it. I’ve had this tool for over 10 years and used it once I think, had an unmemorable experience. But I’m now enjoying it. I like how the weight of it does the cutting I’m using it to bevel the edge and smooth the endgrain . I do need to replace the blade, I don’t know how I cracked it. But even cracked it is satisfying to use. I’ve been collecting wood from furniture that is being thrown out. I picked up a broken chair and I’m now using it as a work bench. Starting small and cheep. My level of precision is too far from ok to attempt to make anything large like a work bench yet. But I’m am gaining on my patents and expectations. Just wanted to thank you for putting this information out here because if it wasn’t for your explaining it the way you had I wouldn’t be trying.
Another enjoyable and very informative video. I am amazed at how nice that handle makes the Spear & Jackson look (and operate). It's like you took the Plain Jane girl to finishing school. Thank you for all the videos Rex. I learn a lot from them even though I've done woodworking since I was 4 or 5 in my grandfather's shop.
I watched a couple of your videos and was thinking "this guy's cool maybe I'll watch more" but when you recommended Paul Sellers I was sold (no pun intended). He got me into woodworking in the first place, and I have a Spear & Jackson like the one in this video but a little shorter that is dire need of the upgrades you're suggesting. I got the handle printout. THANKS!
Hi Rex
Excellent video, thank you for taking the time to make it and giving away the handle plan free.
Your a real Gentleman
Many thanks
Pete (Worksop England)
If you plan on sharpening and setting the saw sometime then do it now with the cheaper one. Making the handle personalises it.
Such a great video.
I have to say, I'm beyond impressed with how well these adjustments have worked so far. I just finished sharpening my S&J back saw, and it's a completely different tool! Now for that handle...
Really useful tips, Thank you Rex. Also, great that you made reference to Paul Sellers, he has inspired so many of us. Cheers.
My pleasure!
Awesome template! While watching, I realized that the old miter box saw I got from my dad 35 years ago was almost identical to the one you improved in this video. So I used your template to re-shape the handle of mine. I've used the old saw a bit now and then over the years, but now the fit in my hand is SO much better. I'm sure I'll use it a lot more often now. Thanks so much for all your videos and especially for sharing this template at no cost. (I'm all about the bargains.)
Rex, this solution is brilliant! I've got all kinds of saws, including two cheapos. They will now experience a resurrection of sorts. Your approach creates a perfect merger of classic quality features and sensible cost. Like I said: brilliant.
Glad to help!
I just bought this saw and followed these steps (minus the handle), the improvement was definitely there I'm pretty happy with my cheap saw.
This is gold! I modify tools and anything else that I use often to make it suit me better. I love the mindset to modify something cheap to get the value out of it. Keep these coming!
Right on!
This is a great saw. Don't ever want a new one lol. I filed off a flat part on the rivets and drilled them out rather than prying them out. Very easy. I also used the Taytools 115720 solid brass saw nuts which were expensive but totally worth it imo. After all that work and an espresso finish on the handle the brass really pops. People constantly ask how I afforded such an expensive saw.
Rex, I'm sure you are more than a little accustomed to viewers telling you that you are AWESOME. So I want to offer a different observation. The problem is that you are indeed Awesome and that covers it quite well. Thank you for the boatload of information you provide for all of us guys who can only seem like wannabes next to you. And just as importantly, thank you for that great sense of humor that makes your channel not just good information, but good entertainment as well.
I needed a good saw for joinery and followed your consels. Bought a saw and a good old stanley number 6 for the very price I intended to spend on a saw..... Thanks .
I have absolutely no need, whatsoever, for one of these saws. But! I want one! I want one, now! Great video! I had no idea that I could customize my saws. Lift kit, oversized wheels and tires, lights, brush and grill guards, fender flares, heavy-duty bumpers and winches! Paint and window tint! Joking aside, I'm going to take a look at the hand saws that I do have. If nothing else, adjusting the set and sharpening the blades can't hurt.
Rex, you have (already previously) persuaded this guy to get into woodworking. I never thought turning wood into dust and shavings would be so rewarding!
I recently bought a new Lie Nielson tenon saw. $280.00 shipped. It's almost impossible to start with a 11 tpi, so what I have to do is start the cut with a crosscut saw and then use the tenon saw to finish the cut. It's so aggressive i have to be very careful with it not to blow out the cut. I hope it gets better with time being able to start the saw. You're a master at providing solutions for woodworkers that can't afford high end tools. Thank you for that and your efforts to make these videos.
Definitely loving this approach to getting "high end" tools from "low end" tools... right in my budget and thought process. Heck, my anvil is a 2 foot length of railroad track that cost me $5 and a 6 pack of beer for a friend to cut to shape for me.
2' of rail makes a beast of an anvil. cheers!
I’m one of your tag along viewers , but just wanted to say that I find pretty much all of your vids packed full of interesting info
Thank you Rex, I had a back saw for years hanging on my pegboard wall gathering dust. The saw would stick & jump all over the kerf. No more! I followed your advice in this video & now it cuts without sticking. Thank you again, now if I could only get my Jack plane to cut…
Hey Rex watching some of your old videos again, here’s a tip a saw in family handy man. Take a fine tooth hacksaw blade and screw it into a bench or floor support or anything really. Slip your sand paper under it and use that for clean rips on your paper.
I must say, this is really well done and cleverly approached. Used to be a woodworker and now a metalworker - it always confused me how woodworkers used to be afraid of metalwork but you showed the huge benefits you can get with some ingenuity and courage. And massive kudos to you for drilling steel with a bit and brace!
I just finished buying and modding this saw. My carcass saws do most of what I need, so I was reluctant to spend top dollar on a larger tenon saw that I may not use that much. I have a few suggestions resulting from my hacking, if someone is still thinking of doing this:
I left the rivets in place while working on the saw - clamping the blade in my vice made it easier to carve the handle. However a plastic blade guard or tape on the teeth are a good idea - as the saying goes, don't ask me how I know. When my back-ordered brass Chicago bolts come in, I'll drill out the rivets and then shellac my handle.
Watch out for the vee notch on the inside front of the handle. With my saw, the template put that notch well into the saw plate. To be safe, make the notch shallower (or leave it out).
Unless you have large hands, leave the red cutouts on the inside tips of the two horns at the back of the handle until you have tested the fit. Ideally the horns should support your hand at the top and bottom with no slop.
Mr. Kruger, on August 18th, 2021 I bought a 10" Spear & Jackson Model 5410Y Professional Tenon Saw for $38.06+ the Governor's Cut on Amazon Prime. The plate's 0.027" thick with a kerf of 0.033". Just checked and it's now $33.06 on Amazon this July 22, 2022. Oh, and it has real saw handle hardware. No prying, just the proper size and shape flat blade screwdriver. (I use my Chapman Gun Screw Driver Kit No. 9600 because blade contour is very important with slot screws.) This version has a cherry stained hardwood handle that, surprisingly, looks like sycamore. "Who Knew?"
Hi, Rex. Don't know if this will reach you, but I'd like to say thanks for your WFH series, I work with persons with developmental disabilities (ADHD, dyslexia, autism, etc.), whom usually have sensory hypersensitivity. I've been recommending your material for them, because power tools (and huge projects) are overwhelming for them, so your material fits like a glove for them. Thanks again :)
Just picked up my S&J backsaw to do this mod. Oh my! Thing is heavy--a tank. That's good--brass back. But when Rex says the handle his horrible, believe him! I am pretty tolerant of so-so cheap stuff, but this handle is really bad. Can't wait to fix it!
Started: Fixing the set... I'm using the hammer anvil as that's what I have. Put some painter tape about 1/8" up along the blade then marked sections equal to the width of my little brad hammer (like Rex's). That way I can measure each section and see how I'm doing. Made one light pass. Be careful--easy does it! Even a light tapping has an impact. I started at 0.050 on my saw and after one pass mostly 0.040 with a few sections 0.037. Doesn't take much. Now I can lightly return to the sections that need more help. I re-measured after every pass (3 in total) and now each section ranges between 0.035 - 0.037. Nice! Sharpening is next but just for grins I tried making a cut to compare new vs re-set. What a difference! The re-set saw's cut line was clean, thin, and straight. Now to sharpen...
I bought myself this S&J saw for my own Father’s Day present! I have watched this video now probably 15 times today! 4 different kinds of rasps were used to shape the handle: pics coming soon for all to see! The hardest part was enlarging the holes in the plate. My 9/32 drill bit was much too dull. Also very glad to see that the plate end is visible in the handle loop on yours too Rex! I thought I had really messed up lol!
Such great conent. I always like coming back here! There's nothing better than sharing knowledge and showing people that they can do something themselves instead of buying it.
Just today i took an old dovetail saw we had laying around with a zylindrical handle (impossible to use), cut off the old handle, drilled some holes into the sawblade and made myself a new handle similar to the one in your video. Then i sharpened it. I guess, without people like you i wouldn't even have thought about doing this. And now i made a previously useless tool into something useable again. Great feeling :)
I was also surprised how much of a difference the handle makes. It's like a different tool. Cuts much better.
Patreon Member #1505 here. New as of this morning.
Thanks for your addicting channel. I'm learning tons and I'm glad to see someone doing this without the standard power tools like table saws. band saws. etc. Nothing wrong with using those tools, but I don't have any, so this channel is perfect for me.
I have all the power tools, but I'm learning to get by without them. Turns out, it's not that hard!
@@RexKrueger
And I just don’t have the room for big, stationary power tools. Turns out, I don’t need the noise, hazards and expense, plus I am developing skills that are versatile and enduring.
Rex, Rex your video prompted to tune up a late model Disston back saw. Used your template to modify the handle and sharped as per Paul Sellers. Now I have a saw that fits my hand and cuts very well. Thanks, Don
I have an old S&J Sheffield dovetail saw. Those old handles really are amazing !
I'm a woodworker. I tend to watch woodworking videos to pick on things wrong with them due to being a partypooper. but yours.... they're actually informative, even for an experienced craftsman. And entertaining. Love your work
yea as far as i can tell only one thing i would add is that the beefy handle is most likely intentional.
i have seen this on other devices, tools and even some high end precision rifles with extremely blocky butt stocks, the idea is that "one size fits all" means "this size fits no one" and nobody knows which shape of handle you need better than yourself, so they make it beefier on purpose so that even someone with giant gorilla hands has enough stock left over to touch it up with a file and some sand paper. it is a genius idea and not something worth criticizing, if the handle was crap *and* too small to fix up, then we'd have a problem.
Thanks Rex, this affordable tools thing is great. Woodworking for humans is great.
This was a super fun project, I appreciate how much time you put into your videos. It's inspired me to get back into woodworking again.
I did something similar to a spear and jackson from the 70s (I think). The same clunky handle, plus a thick layer of plasticky varnish. I reshaped it, and finished it with linseed oil and wax, and now the feel is as good as my 100 year old saw!
Have done two now and would recommend grinding the top of the rivets flat (on the opposite side to the medallion), drilling the heads off with a 7mm drill bit and punching the rivets out. The sharpening tips worked well and both saws now start easily and cut true. Thanks again.
How did you grind them flat, did you use a dremel tool or a file? I’m just curious as I am about to start this project with my 8 year old son.
@@jasonburch2061 Dremel would work, but I think I used a file. Good luck with your project.
New woodworker and its funny I purchased the 9550B. Going to attempt the upgrade. Thanks for nice vid.
Thanks!
I have several nice back saws. My go to is a $10 Buck Brothers I picked up at Home Depot. Garbage off the shelf, but after I refiled and set the teeth, saw works incredibly well. I guess that says something about what quality really is.
I so need a good saw and I'm glad this video just came on because I was looking at that spear and Jackson the other day but honestly now I just want one from Sheffield to go with my vintage Sheffield tools
Holly molly! It really does eat the wood like butter! That is a lot of material removed. Is that all because of sharpening and set aligning? Amazing.
GENIUS suggestion! This made my cheap Buck Bros. miter saw cut so very much better. Thanks for sharing this!
Absolute top notch Rex I appreciate you highlighting Paul sellers who along with rob cosman are the equivalent Chippendale's of today. I really do like your videos Rex your so much more inspiring than your countless birch ply countrymen.
Stay safe brother
Great video. I did this to a 100 + year old Disston backsaw about a decade ago. It's very satisfying to understand how to maintain all of your tools and to make them work properly. You're so right that it isn't about the money but how you maintain and use the tools you have.
Great video, I followed these steps and managed to identify the issue with a vintage saw I'd sharpened. I thought it was my skill that was the issue with me cutting straight, but after noticing the set on the teeth was ragged and knocking it back a little, I'm able to cut much more accurately to my marks and with a significantly cleaner cut.
(also I picked up the vintage saw for £20, so should probably go in as a suggestion; if youre going to restore the saw anyway, I'd hit the vintage market over the new market without even blinking)
DAY-um!
I love your attitude and thought process.
I look forward to becoming a patron. Just another month, I hope.
Tried sliming down my S&J tenon with a hammer and anvil, worked much better. I will have to fill the tip and sharpen it. But what a difference. Thanks.
I bought one of these last year after first viewing this video. I didn't believe the handle could be that bad, but wow it was awful. Thanks to your template it's now very comfortable and better looking. I removed the set but didn't sharpen it and it worked pretty good. Tonight I finally got brave, broke out a small file and sharpened it. Much better. Great instructions Rex. Nicholson recommends a 4" xx-slim file for 15 tpi saw sharpening.
Just picked up some vintage Freud saws. And I'm gonna take the plunge into exactly what you are doing. The handles suck. I think this video will help. Thanks Rex.
when restoring some of my grandads old tools I found one of these saws and thanks to your advice on how to fix up handles and sharpen a saw, I got it back up and running again. thankyou rex love your videos, keep it up
This is brilliant. I'm going to go broke trying to get going into woodworking if I'm not careful 😆 so videos like this surely will help me. Even if I worry I don't have the skills to execute on improving a saw, at least I know one saw not to buy and one that will probably be decent. Btw, and I'm sure this has been mentioned, I became a big fan of step drills for enlarging holes in thin metal. Got a set of Harbor Freight bits on sale several years ago and they've been great for occasional hole drilling in aluminum, acrylic, polycarbonate, and other materials. They make drilling and enlarging holes quick and painless, although I wouldn't say they're high precision tools by any means, but they excel in certain situations. The HF 3-bit sets go on sale regularly. Hope this helps someone out there.
Rex,
I saw this video and its plane to see you nailed it..
But seriously....I'd like to say thank you for this and all of your other great videos.
You are one of my favorites that I follow.
D.H.
Wow, thank you!
Wow. I had no idea how much improvement can be added to a marginal back saw. Thanks for the very informative video with excellent description.
This is the video I've been waiting for. I bought the spear and Jackson a couple months ago.
I have several of these s&j back saws and a steel backed version is my go to saw . I bought it at a recycling shop here in the UK and paid 50 pence for it , probably about 75 cents US . A quick clean up , sharpen and set and it's the perfect saw . Thanks for the video and stay safe.
Great re-work! Impressive ability to recognize and correct the problems. Very very well done!
Glad you enjoyed it!
I was looking online at Crown + S&J tools just other day and trying to find some that were NOT manufactured in China. Some gardening tools were UK/European but the woodworking ones I'm not sure about. Manufacturers should make it clear the country of origin and not hide it away. Great video, so subbed 👍
Hey, Rex! I remember a technique for saw optimization. Take a diamond sharpening plate and stroke your teeth gently lengthwise as the saw is perpendicular to the face of the diamond plate. That evens up all the teeth. Then put the diamond plate against each side of the blade and even up the set on each side. The saw should now be even a bit more tuned.
Hi Rex. I got a S&J saw for Christmas this year and I had to adjust the saw set as well. They seem to set these saws too wide. After trying your trick to take out some saw set it worked like a charm. My set ended up as 0.035 all along the length of the blade and it's beautiful to use now. I just have to work on the handle now. Thanks.
That's great thanks. I picked up a couple of S&J backsaws that had been thrown away a couple of years ago. Couldn't get on with them so they have sat on a shelf ever since. They will be getting the upgrade so thanks for sharing.
That handle is gorgeous! Thanks for making the plans free... think this is gonna make its way into my project stream. Wonder if anyone from the company that makes it will ever see this and make these improvements to the manufacturing process
Found you during (ovid! Shop was quiet this summer, but ready for a cool garage (and lower humidity) and finally learning dovetails for some Christmas gifts. Thanks for the content, wish i could send you $$ here in da'tube.
Just done this mod to a vintage S & J saw, the handle in particular feels soo much better!! Brilliant video!
Nice vid Rex. I recently bought the S&J tenon saw, and the traditional skew back saw. I watched the Paul Sellers video where he recommended this saw maker. I must say, the tenon saw, out of the box truly sucks. I was cutting some dovetails for a set of bench hooks. Saw was really hard to start the cut, and cut was really ragged. Switched to my Crown gent saw and got way better results. Also used a shark saw, and get even better results. I must admit, I'm a little intimidated by taking a file to such fine little teeth. I think the results that you were able to achieve will encourage me to do it. Thanks for the fine video
Now that explains an awful lot of the problems I had with saws - thanks a lot for the good advice, Rex! Keep up the good work!
Sir Krueger I like the way you takes pride in what you are doing, I full joy your videos, thanks for taken the time to put out these dynamic videos together, I'm from the old school by way of my early training, in spite of the technology of power tools that I now use , had I not learnt the as you do I would not know how get myself out of some difficult areas in the Carpentry ,you certainly brings back memories , Continues to do what you are doing to help others , your skills is exceptional.blessings
Thank you kindly!
Thank you Rex! I can't tell you how much I appreciate these videos. I have a couple old backsaws that I can use your template on and will as soon as I get some space to work in.
Very helpful tips to manage the saw teeth from jagged cuts!
Thanks Rex. It fits both saws in your description on the template.
Word to the wise: when drilling the holes for saw nuts, don’t use pilot tip bits in a drill press. I wound up breaking the handle and decided to leave the project on the shelf for almost a year. I decided to start with a fresh blank and so far so good. I’ll be more careful about drilling holes for the saw nuts. I could have sized the handle a little smaller but had already cut the new blank. Shaping is definitely fun and I’d suggest mimicking the Veritas handle to make shaping easier.
Thx for the inspiration. Finished today the restoration (handle building) of one of my vintage saws. Keep it coming!
Rex this is a fantastic insight a to how to elevate the level of an average tool into a great tool. Well done and thank you for your guidance.
I bought a $10 Irwin saw, found it to be great and ideal for my needs. Just can justify spending the money on some of those expensive saws
Very coo approach. I am always making old machines better, not much of a wood worker. But I do have an old cross cut and rip handsaw they come in handy from time to time
This isn't just a great way to get a quality saw at a cheap price! It's looks like a very fun project.
I had more fun than I expected to!
@@RexKrueger there is definitely something especially satisfying about making something not only better but also your own.
Nice job.
Another option is going to a used tool store or a flea market or a tool swap meet. I got a nice old dovetail saw for $20.
@@gmmeier321 Not too many flea markets going on right about now...
Bravo! I have been following this channel for a while and it has turned out to be an awesome channel for beginners....
i use shellac in guitar building. feels so nice on a guitar neck. love the smell too. hard to put into words the feeling shellac brings to something you touch and move your hand across...
Thanks for all the great info and the template. Can't wait to get to work on my old saws. Will be buying some plans soon. Your channel is my favorite. Thanks again.
I had bought that exact saw about a year or so before this video came out, and took about six months to finally get around to it
Rex i been into this woodworking for about the last year and must found you your the man bro there is no other like you do im Really into the handplanes and up until now I can use them but I wasn't all that great at it now that I've seen some of your video0s and figured out What I was doing wrong I'm way better I even have all the tools I got a plainer I got a Joiner but I'm really into the hand planes and liked them a lot and have been trying hard to figure out how to get those good Curley's like you I've been watching Your videos for about the last week now and have learned more in this week about my hand planes then I have Learned in the last year Videos are great man keep 0up the good work you're probably the best I've seen on RUclips woodworking wise anyways I usually don't comm0ent becausei i figured you guys don't read them but oh well hopefully you read this great job keep it upp
I read as many as I can!
Rex, RE sanding curves...Y'all might already know this but searching 442 comments to find out is...cumbersome. Mr. Medina Sanchez is right on with the duct tape hack. Cursing naturally results from the torn paper. Cover the whole back side with Gorilla tape. Extend that tape past the edge a few inches and fold it back on itself and onto the surface of the sandpaper for a very secure handle which allows you to use all but a fraction of an inch of the surface. You can even fold in a scrap of something to make the handle easier to grip.
One thing to say about this saw is that the original set is hybrid: one tooth on one side, one on the center and one on the other side. From what I've been seeing on RUclips, this filing is for a rip saw (no flean) which I understand is fine for a saw with such small teeth.
I'm currently setting up a tiny workshop and just the other day I was thinking what kind of saw I should get. Was checking Amazon and this S&J came up, did not buy it yet tough. Now I know it could be right for me. Thanks for this perfectly timed video.
Hope you enjoy it!
Best one yet. Speaks to my inner cheap side. I might even look at my saws to see if they could use some TLC.
CHEERS stay safe everyone.