SNOWBLOWER JOHN DEERE 1025R Single Point Connection Upgrade
HTML-код
- Опубликовано: 16 сен 2024
- Today we upgrade the 4 connections to one single point connection for the 54" Snowblower on my John Deere 1025R compact tractor.
www.greenpartstore.com
Parts used:
1 Hydraulic Quick coupler upper connection Part# LVA24157
4 O'Rings Part# R26448
Riley and I thank you for watching and please Subscribed if you haven't already.
It helps the channel grow so I can do more project videos. 👍🏼
Thank you!!!!!! Trading my X758 for a 23' 1025R and this was the only issue I had. Now not an issue!
Hey Thomas, One of the best investments I have made to the tractor was the single point connection upgrade. Take Care
What a wicked versatile tractor! Super slick! 👍🏼
Hey Rich, Yes there’s a lot of very nice manufacturers of tractors but John Deere has the ease of implement swaps down to a science.. especially with the auto parking loader. Once they came out with that single point connection for John Deere I knew it would be a game changer for me. Take care my friend.
Hopefully you need to use that everyday this winter ! Nice tractor.
Hey Mark !! Thanks for stopping by. Where the heck ya been?? Hope you had a great summer. And yes.. Hopefully I can do some deep snow removal videos like years ago. Take care my friend 👍🏼
@@SometimeIsNow All is good just working lots. No time for YT
Thanks. Had same idea but now know what parts and how to do it.
Hey Donald, Thanks for stopping by the the channel. I’m glad I did the upgrade now.. Well worth the $$. Check out my other video I just posted to see how easy it is to go from loader to snowblower. ruclips.net/video/hESMfrdXsBo/видео.html Take care
Appreciate the knowledge. I will be doing that to my 1025R.
Hey Mark, Thanks for stopping by to check out the video. If you have any questions feel free to ask. 👍🏼 You’ll love the upgrade. Take Care
@@SometimeIsNow will it fit on a cab tractor 🚜?
@@markschmaus5580 To be honest I really couldn’t answer that as I don’t know anyone with a cab on their tractor to do measurements.
@@SometimeIsNow ok. Thanks for the reply!
Great job
Thanks John, Much appreciated. And thanks for stopping by the channel. 👍🏼 Take Care
Nice shirt buddy! That would be such a workhorse!
Thanks man.. Gotta rock the Mudbrats shirt once in awhile to support one of my favorite channels 👍🏼 Take care Buddy!!
@@SometimeIsNow i love u man!
Nice setup sometimes
Thanks MIke.. and thanks for stopping by and Welcome to the channel. It’s been a good little tractor so far. Take Care 🤙🏼
I just stubbled across your channel and love all of the 1025R videos. I’m curious as to what bucket hooks you have mounted on your tractor. Thanks and keep up the good work 👍
Hey Keith, Thank you and I’m glad you found the channel. 👍🏼 The hooks I have on my bucket are from Bolt on hook: www.boltonhooks.com/product/bolt-on-grab-hook-with-hardware/ Take Care.
Thanks for the video tutorials. Helps a lot. Does Deere make a quick change solution for changing the blower to the brush and back with this single-point upgrade? I use our 1023e (wish it was a 25 or 26) all year long for the school district where I work. In the case of the blower/brush, the quick-connect bracket would be an issue for me as its used on both implements.
Hey Avery, Thanks for stopping by to check out the video. Sorry I just seen your comment. I don’t see why you couldn’t install the single point on the brush just like I did the snowblower. Once you install the lower half to the tractor. You can add that upper half of the single point connection to any attachment you wanted. (Snowblower, Brush, grapple) You just have to purchase the upper half like I did for whatever attachments you wanted to add extra. Take Care
Nice video, one question, don't you have to release the hydro pressure before taking off the coupler ?
Hey Eric,
Thanks for stopping by the channel to check out the video. To answer your question. No, you don’t need to purge the hydro pressure off before you take off the single point like you do on the pain in the butt original connectors. That’s what makes this upgrade well worth the investment. The amazing thing is it doesn’t leak a drop when you disconnect. It’s quite the setup. Take Care 👍🏼
My other video from loader to snowblower in under 3 mins with he single point
ruclips.net/video/hESMfrdXsBo/видео.html
Take Care
Thank you my friend
Hey Charles, thanks for stopping back and your welcome. Hope this give you an idea of what’s ahead. 👍🏼 Take Care
Ordered parts, should be done in a week or so. I don't think there is a way I can use loader and quick hitch. Take any real time with drive shaft to come off?
@@charleslynch908 Hey Charles, After looking at the tractor there’s no way to leave the small mounting bracket on as the loader kickstand needs that area to stow away when it’s mounted to the tractor. I would say the way it sits right now I could take the loader off, install the small bracket and driveshaft and then install the snowblower in about two minutes. Now you have me wondering exactly how long it would take to change out.. I might time myself tomorrow and see and I’ll shoot a quick video and post it. Challenge excepted.. LOL 😂
Tour going to need to change that banner in your garage before you bring your new ride home.🙀
Hahahaha.. Hey Brad. I’m already way ahead of you. If you watch in this video there’s a new banner rolled up hanging on the far left of the skidoo banner.. It can’t come out till the new sled arrives. 😁 Take Care buddy.
That is some cool shit .
Thanks Joe, It sure did make changing the loader much easier for me. 👍🏼
Just got a 2023 1025r
I have the single point for the loader.
If I were to buy a plow or snowblower and didn’t have the second upper angle point coupler, would you be able to just plug in one at a time and still use it?
If you didn’t put this on the snow blower would it have Still worked just take longer to hook up?
Hey Connor, Thanks for stopping by the channel to watch the video.
I think I understand what you’re asking. If someone had a snowblower or plow with just the 4 standard quick connect lines instead of the upper portion of a single point mounted to each attachment. You could still use a snowblower or plow, you’d just have to disconnect the 4 hose connections going to the single point single down where you would normally plug any attachment in and plug in the plow or snowblower there instead of using the single point connection. Then just throw on some color coded caps going to the single point so you wouldn’t get dirt in the connections until you were ready to hook the single point back up and use your loader
Hopefully I answered your question correctly.
What am I missing? Why is their two different single point attatchment bases? Did you remove the loader base and replace it with a different snowblower base?
Hey Marvin, No.. there's not two bases. there's only one base that stays mounted to the tractor on a bracket but there is two Upper hydraulic connections. One for the loader and one for the snowblower. 👍🏼
COST is a huge factor here. Your single point attachment is over $300 (per attachment- i.e. snow blower, backhoe, etc.). The other issue is that the "main unit" is almost $700. Very expensive set up for those of us that have already spent a lot on these tractors. Your video is VERY good, I just want others to know the cost involved. Thank you for your content.
Hey Goforce,
Thanks for stopping to watch the video and I’m glad you enjoyed the video. You are correct and enjoy the feedback, this Single point setup is somewhat pricey and definitely not cheap. That’s why I listed in the description where I purchased everything along with part#’s so people could do there own research and decide whether it is in their budget. Each individual will have to decide if the ease of use and eliminating the frustration and mess of those 4 quick couplings cause outweighs the price. For me it was a no brainer not having to swear at those couplings every time I wanted to remove the loader. This conversion was well worth the money.. I simply love everything about the tractor now. Best thing about this is now I don’t have to shut the tractor off, climb off the tractor, unhook the frustrating quick couplings and clean up the mess from them leaking all over the place after you unhook them. Win, Win for me. Take care. 👍🏼
Clean install what’s the purpose of replacing what appears to be the same o-ring with the same one
You don’t replace the ORF O-rings and the others ones are fine so just want to understand the process everything else is straight forward
Hey Luis, Thanks for stopping by to check out the video. I replaced the one set of O-rings because I had ordered them with the kit, so I decided to use them because I had them. The ORF o-rings I didn’t order so I looked at the current ones and they looked fine so I reused them. If I had a issue with a leak I would have just order the ORF o-rings if any had leaked but they did not. Hope that made it less confusing. Note: To this day they still haven’t leaked. 👍🏼 Take Care
@@SometimeIsNow thanks for the quick response - looking to do this - do I need to get the extra orings
Second question did you mount the carrier onto the snowblower and then on tractor, any issues hooking up/installing the drive shaft?
If I didn’t say it very nice video thanks for putting together ,
@@luisroth7309 Hey Luis, If your tractor is newer I don’t believe you will need new O-rings. Just use the original ones first and if you have a issue then I would say just order one. My tractor is a 2017 and I used the same ORF O rings without an issue.
Watch my quick install video with this link and you’ll see exactly how I install snowblower. ruclips.net/video/hESMfrdXsBo/видео.html Take Care
@@SometimeIsNow thanks for the quick responses and the link to the video I have seen it but will watch closer any questions will let you great support great work, keep it up!!!
@@luisroth7309 I install the driveshaft all the way forward through the two bearings in the frame mount then hang it on the tractor. I’ve tried the other way where I’d hang the bracket first then try to get the driveshaft through the two bearings after and I’d struggle getting the hex shaft through both the bearings. It’s much easier keeping the driveshaft in the mount and hanging them together. Then i just pull the quick hitch over to the mount and hang that on the shaft that goes across the the quick hitch. Hopefully this is what you were referring to. 👍🏼
Do you know if the presence of a Mauser cab on the 1025r affects the install of single point connector?
Hey Tom, Thanks for stopping by the channel. I was comparing the location of the top rear of the mounting bracket that the single point mounts to on my tractor to a photo of a tractor with a Mauser cab and it’ll be close. Without getting measurements from each tractor I couldn’t say definitively if it would fit. Using photos it looks like the bracket will come very close to the front right footwell area on the front of the cab. I was trying to determine by using the body lines on the side panel and hood to estimate where your cab would end and the bracket would meet with the cab. If it were me I think I’d try it but I dont want to give you incorrect information. If you need me to take some measurements on my tractor on exactly where the bracket is located let me know.. I think that’ll be the best bet to verify it’ll work if you really wanna pursue this. Let me know. Take Care 👍🏼
@@SometimeIsNow thanks much. I think I'll try it
@@tomlundquist5476 👍🏼
I have the Mauser cab and the single point - it fits!
@@mikefalch8304 That’s great info for my viewers Mike, Thank you for stopping to check out the video. 👍🏼
How to fix the blower on a 47 snowblower
Hey Rick, Thanks for stopping by the the channel. I believe the 47” snowblower drive sprockets will be the same as the 54” blower depending on the age of the 47” blower. I don’t have the info on your snowblower but as long as it has the same chain and sprocket setup. 👍🏼 Take Care.
Did you have to buy longer hoses for snowblower to reach single point connection?
Hey Jim, No sir.. I used the stock hoses that came on the snowblower and just hooked them into the second upper single point connection I purchased. Take Care 👍🏼
@@SometimeIsNow Thanks much for your response. Stay safe and healthy.