Как успехи? Я на своем лето откатал, 3 раза нормально так разложился. Зимой буду переделывать на длинную стальную раму как в видео и добавлять то что не успел к лету Крепления ног, запрограмирую тормоза и куплю антиискру и кучу мелочей
Change the ramp up power on your esc's. Then you should have no issue taking off from a stand still on a hill. If you are pulling under 80a, buy some 80a blheli_32 esc's. Set your timing to auto and max your rampup power and acceleration.
Well, using this red brick esc´s was a mistake. Red brick was a price winner :-( There is no settings option to change rampup power. Now I´m watching to the esc manual and don't see this. Bouncing is not a big problem. I got used to it. I´m not a racer, just occasional cowardly rider. But most annoying is the weight. Thanks for tips ;-)
@@RobertKocian its the high response throttle option,and mid brake will reduce the braking power. Metal fet esc's are alot smaller and can handle some high amp draw with up to 10s voltage. Check out the underground fpv kamikaze esc's. You would need some tiny fans on them for your application, but they are cheap and powerful. You can use blheli_32 suite to change the settings on them with your pc. You can also limit current draw. So if you want to cut back on the amount of power you can set a max current draw allowed. As well as change the frequency. Bumping it up into the 30s or 40s can help smooth the motors out. Check out blheli_32 to see all the available settings.
Honestly, don't know. There was a lot of purchase. Some of them wrong. And many many work. You may calculate it from documentation on website. I'm lazy for this. Sorry :-) But yes, it was expensive. Don't tell my wife, OK? And of course, Thank You :-)
chlape, ještě teď mám votevřenou hubu; zase jsem pochopil k čemu je důlčík; a mraky fajn triků; ale troufám si s nima maximálně na dřevo...; ufff, boží; jo a jasně, karimatka a různý vychytávky z domácích potřeb jsou základ, ale asi ne když jde o 2kW...huh; smekám neexistující klobouk...
Člověče nepřeháněj, začínám se červenat :-) Ono to tak možná vypadá, ale z domácích zásob jsem neměl nic. Aji tu blbou karimatku jsem kupoval ve sportu. I když ty nerezové plechy byly z nějakého kontejneru, ale to je tak všechno. Mě to zase moc nejde se dřevem. Hlavně s maflem se furt nemůžu domluvit :-) Díky za pochvalu :-)
where did you get these big pulleys i searching long time but cant find for a good price and in this form thats why i build my bord with cain but i want to upgrade
Chain is better I think. Belts still breaking after about 50km (31miles). Or if mud gets under the belt it breaks after a few meters. I would like to upgrade on chain, but i'm lazy :-) Pulleys I bought on ebay. Search there "5M72T Timing Belt Pulley Gear Wheel Sprocket 10-20mm Bore For 15/20mm Width Belt" I don't know if the price is good. I hesitated a little with the purchase.
Very good work!! The ride with kid is great! He will remember forever!!
Love all the videos leading to this, very talent my friend, great metal and electrical works. Would like to see how you installed all the wires works
Thanks sir for your great work Idea
Muito top o projeto parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻
How it goes through broken stick awesome build
Stick is OK, I was just terrified :-) Thank You :-)
24kg holy moly, awesome build though man that thing is insane for a diy
это не реально круто сделано ( уже в процессе повторить проект ) с меня подписка и Лайк
Я вами восхищаюсь
Как успехи? Я на своем лето откатал, 3 раза нормально так разложился. Зимой буду переделывать на длинную стальную раму как в видео и добавлять то что не успел к лету
Крепления ног, запрограмирую тормоза и куплю антиискру и кучу мелочей
coolest thing ive seen for a while swapping metal frame with carbon sheets would take most weight off
awesome Kid riding. look so cool.
Damn... it came out really nice and really heavy! :D
There are hundreds of mistakes, but the weight clearly wins :-D
i made one, with 4 hoverboard motors, 750 watts each one, 3 kw total. Using the same hoverboard controllers
Настоящий инженер.
It's working awesome...
Super cool!)
again awesome build dude... you should just build a trailer you can pull for your son to ride in :)
Solution is already exist. Just using a short painting telescopic pole with pushing fork for pushing his bicycle :-) Thank You very much :-)
good job bro
Thank You ;-)
Awesome, what max speed of this board? Km/h
Full battery on flat asphalt 30km/h
What is the exact model of the motor and ESC? I am making one with hoverboard motors and need a backup.
How much ampere BMS Batteres ? Im using 30A BMS but its always lost Voltage if i use.
Hi, I charge my batteries with ISDT D2. Yes it's annoying, I have to remove the batteries, charge them and put them back in the case.
Change the ramp up power on your esc's. Then you should have no issue taking off from a stand still on a hill. If you are pulling under 80a, buy some 80a blheli_32 esc's. Set your timing to auto and max your rampup power and acceleration.
Well, using this red brick esc´s was a mistake. Red brick was a price winner :-(
There is no settings option to change rampup power. Now I´m watching to the esc manual and don't see this.
Bouncing is not a big problem. I got used to it. I´m not a racer, just occasional cowardly rider. But most annoying is the weight.
Thanks for tips ;-)
@@RobertKocian its the high response throttle option,and mid brake will reduce the braking power. Metal fet esc's are alot smaller and can handle some high amp draw with up to 10s voltage. Check out the underground fpv kamikaze esc's. You would need some tiny fans on them for your application, but they are cheap and powerful. You can use blheli_32 suite to change the settings on them with your pc. You can also limit current draw. So if you want to cut back on the amount of power you can set a max current draw allowed. As well as change the frequency. Bumping it up into the 30s or 40s can help smooth the motors out. Check out blheli_32 to see all the available settings.
@@Just-A-Guy-Learning
It looks really interesting. Mmmmm..... I will think about it
.
Thank You very much for new informations ;-)
@@RobertKocian no problem
@@RobertKocian Google for vescs. You'll be amazed. Trust me.
How do you fix the problem of braking?
Didn't fix it. Just got used to it.
Отлично сделано но болты на корпусе аккумуляторе торчить не безопасно.
I had no better idea. Random braking (lost RC signal) is more dangerous. Trust me :-)
Thank You ;-)
First like and first comment bro
Good job. How much did it cost you?
Honestly, don't know. There was a lot of purchase. Some of them wrong. And many many work. You may calculate it from documentation on website. I'm lazy for this. Sorry :-) But yes, it was expensive. Don't tell my wife, OK?
And of course, Thank You :-)
chlape, ještě teď mám votevřenou hubu; zase jsem pochopil k čemu je důlčík; a mraky fajn triků; ale troufám si s nima maximálně na dřevo...; ufff, boží; jo a jasně, karimatka a různý vychytávky z domácích potřeb jsou základ, ale asi ne když jde o 2kW...huh; smekám neexistující klobouk...
Člověče nepřeháněj, začínám se červenat :-) Ono to tak možná vypadá, ale z domácích zásob jsem neměl nic. Aji tu blbou karimatku jsem kupoval ve sportu. I když ty nerezové plechy byly z nějakého kontejneru, ale to je tak všechno.
Mě to zase moc nejde se dřevem. Hlavně s maflem se furt nemůžu domluvit :-)
Díky za pochvalu :-)
Is that a drone motor ?
BLDC
@@RobertKocian how much kv rating for that motor ?
@@sugavaneshwarang2570 rcsearch.info/hobbyking/i51866/
What made you crash?? I heard it beep prior... Did power cut?
The crash was due to hooking selfie sticks on a branch. I noticed beep when editing the video. Honestly don't know why it beeps.
where did you get these big pulleys i searching long time but cant find for a good price and in this form thats why i build my bord with cain but i want to upgrade
Chain is better I think. Belts still breaking after about 50km (31miles). Or if mud gets under the belt it breaks after a few meters. I would like to upgrade on chain, but i'm lazy :-)
Pulleys I bought on ebay. Search there "5M72T Timing Belt Pulley Gear Wheel Sprocket 10-20mm Bore For 15/20mm Width Belt"
I don't know if the price is good. I hesitated a little with the purchase.
cool
👍
Which types of motors are you using here in board?
KEDA 63-64
Okk.. 👍
size of tires
yes
the motor engine power please?
KEDA 63-64 190KV 10S 2000W
10 s 2p? and op 1865 ol lifepo4 3270 will by better
ok