Hope you enjoyed the video! Go to ground.news/uri for an objective, data-driven way to read the news. Save 40% on the Ground News unlimited access Vantage plan with my link.
You should sing more. Seriously. Don't get me wrong. Avoid doing it professionally, but if you edit your videos with more singing it would definitly spread smiles everywhere like no one else. I know i would smile more. Keep 'em comming!
There is a very fine line betwixt insanity and genius and you walk it like a drunken sailor dancing a jig on a shaker table. I wouldn’t miss a single second of your videos. You are fabulous.
I've painted, stripped, repainted, restripped, etc. more projects than I care to recall, my friend. I raise a glass to your creativity AND persistence!
"Small percentage" viewer here. I came for the engraving all those years ago, but I stayed for the shenanigans. Informative and hilarious as always, Uri!
I watched an amazing vid once of a guy doing just that with a lathe. All he had was a chuck and motor and used them to make a very profesional, well balanced and more torque than hell ever need, things we can do if time allows are almost endless🤔✌️take care.
@@LorenXLX hi, sorry it was a while ago now, I remember it was an english guy, maybe look under machinery/l/ lath construction at the top of your home page. Sorry couldn't help more. Good luck take care👍
I've enjoyed your videos for so long and now I feel like I can finally give back in some minor way with a painting tip! When you mask an area, paint it once with the same color as the base color to "seal" the edges of the masking tape, *then* paint your second color. Hope that helps in the future!
@@smashyrashy If it bleeds, the bleed will be the same color as the basecoat. The bleed will also seal up the small gaps between the tape and the surface of the work to keep the second paint color from doing the same.
Another tip is to burnish the tape with something smooth. Especially if you're using low tack tape. You can get really good results combining the two methods.
In my daily life I frequently feel like I'm the weirdest person around and don't talk about my interests much. But when I'm watching Uri's videos for some reason this tension leaves and I can breathe freely. Thank you Uri!
That yelling lathe mushroom was so funny. I can see you put a lot of effort into not just making your wonderful ideas but in your video and musical editing too . Your an amazing guy . Keep up the good work . Be happy.
While walking upon youtube I came upon a shakespearean eccentric holding a chisel in the left and finger-less glove in the right and laughed at the pigeon sitting on his shoulder as it looked at me and said, _"I taught him everything he knows."_ Humbly subscribed.
If everything went as planned I wouldn't like these videos as much. I enjoy watching someone get derailed by the same obscure issues that would affect any one of us. We have all needed serenity now.
"It's garbage... let's try again..." and then I saw A GIANT VERSION BEING BUILT and I laughed out really loud because I was thinking you were going to put an actually HUGE SWITCH BOX on the bandsaw because it was just easier to make!!
So happy RUclips has recommended your video. This channel is the best I've come across in a long time. Thank you for bringing joy on a miserable rainy Sunday afternoon here.
I know you won't see this but man, it is sooo much easier and cheaper (after like 3 projects) than most people think to get into using spray guns instead of rattle cans. (If you or anyone else that reads this chooses to go this route, research- -The different types of guns/spraying (hvlp, lvlp, etc) and decide what's best for your compressor, projects and shop. (Probably lvlp for most non professional settings) -Fluid tip and needle (Surprisingly pricey so just go with a gun that comes with the one you want) Thicker paint/finish needs a bigger hole to flow through (For me- 1.6 and thin accordingly) -Paint and finish Just for simplicity, I go with the same type of solvent lacquer and conversion varnish for everything (mostly lacquer rn, want to move 100% to con var soon), just get the same type in a primer, paint base, clear, sealer, etc. never deal with chemical incompatibility. Dyes/tints to make your paints I had no money for a long time, so I just got straight lacquer, used titanium dioxide and whatnot to make my own paint bases, thinned for sealers, etc. - A scale and notebook for logging and replicating things. If you don't need to mix 10 gallons at a time with milligram precision, a decent scale is very reasonably priced. You can also make a less precise scale still work with some fancy work arounds. -Solvents and additives I just have lacquer thinner, acetone and other misc solvents, I use the ones that flash off faster to speed things up, I use the slower ones as retarders. Obv the real stuff will often work a bit better but I ain't made of money lol it works -Compressor For small projects you really don't need much, set your gun and finish/paint up for spraying at as low of a pressure as you can get it to still spray nicely. I used a small pancake compressor for a ton of stuff for a long time. For smaller stuff an airbrush is awesome, they can run off a tiny compressor that doesn't even have a tank and they cost like $15 (and somehow still work fine), the orings don't play nice with the harsh solvents I use though. You can replace them with teflon if you want but I haven't bothered yet, I just make sure to not take the air brush apart until all of the solvent has had plenty of time to evaporate and leave the rubber. Idk what it is about most air tools but you can buy the cheapest ones on the market and they still usually work fine. Usually need a bit more care and time in setup but still. Can't say the same with almost any other kind of tool
You're stuff is always a work of art. I mean the whole video. I've been working in graphics, animation and 3D for 25 years and I think you're exceptional. OK, enough praise.
I love that you keep so much of the trial and error! It's really how it goes sometimes where you're bangin your head against a wall trying to make it work and it takes several tries. Love seeing the process for real and not just the golden takes.
This was probably one of my favorite episodes yet, not for the many sad mistakes / end results you didn't like but for your humor. I really do appreciate that you show all your mistakes, because no one makes everything perfect all the time. Also, it shows that you have a certain standard for yourself, and once in a while it's ok to just f**k it.
You're reliability one of my favorite entertainers on any platform. As always, may you have success in all of your endeavors in the future. Especially involving paint.
Awesome video! I have a trick for masking small features that works great. After applying the masking tape, lightly spray or brush it with the same color as the base. This step helps seal any tiny gaps in the tape. Once that's dry, you can apply the color you want to mask off without worrying about it bleeding under the tape. It is an extra step, but this method ensures clean, sharp lines every time.
If there was ever a video that I would want my entire internet algorithm to be based off, it would be this one. Your personality, process, skills and peculiarity are on the highest level. I appreciate whatever it is that you do.
I have nothing in common with your wood working skills but I love all your videos, they are quite creative and have allot of personality in their presentation compared to most other channels.
I’ve had a right old week, seeing a new Tuchman at the end of it is just lovely. Not watched it yet, but my thought on “I turned myself into a bandsaw” is yep, not surprised at all.
Hey thank you for showing your failures. I had a day of painting auto body, fenders etc. That day, everything I had wrinkled to death. An entire days worth of work gone. So many failures corrected throughout the day only to run into it again. This helps remind me that frustration and steps back are normal.
Another pro tip is make sure you check whether spray paint is an enamel, lacquer, acrylic, or urethane and make sure to only use like products to keep it simple but you can still apply any finish over a lacquer if it is fully dry and your nose will let you know if it is
I truly hope you are having a good time, Uri, in the big picture! Because I am enjoying every one of your videos. You really are a great artist...and by also sharing your mistakes and unfruitfull endeavors (which honestly are entertaining) you make the crafting process real and accessible. Your creativity, though, is beyond compare. Please keep on shenaniganning! ❤️
I commend your resolve and respect your sunken-cost-fallaciery... The animations and sound are wonderful in this one, I look forward to the inevitable PigeonSaw 2.0!
one of the reasons i love your videos so much is, it reminds me of my old self, creative motivated autistic and happy, i'm now just, creative unmotivated autistic and sad
I've always loved and respected the entirely unique content you make, but I cannot explain how happy it makes me to see you not only find but also perfect your stride. Every element down to the music and the edit, you inject your creativity into every aspect of your videos, and I just wanted to say that I appreciate all of it more than you can know. Cheers.
Your videos always scratch something in my brain of wonder and nostalgia. As much as I wish you could upload more I’m happy you don’t rush videos because they’re awesome! Serenity now!
I love how you show your mistakes and potential failures, it really shows how much time and effort goes into your videos. Good for you Uri, always happy to find out what you've been up to
The amount of patience you have man. Way more than i would have. But yea MDF is a pain. I was trying to do a paint job on an old speaker box and ran into similar problems. So i just used spray adhesive and stuck fake leather on it that i got from hobby lobby. It was very cheap too. So it worked out
As ever a most entertaining and thought provoking work. I hope you have not suffered too much from the tribulations in this creation. As regards your burgeoning singing career however I fear I may have some bad news.....
That was a challenge! Well done Uri for persevering and keeping us entertained. I hope you have some nice weather and you can go smell the flowers now.
I'm gonna guess this was the happiest accident and not your actual inspiration, but I gasped when you added the googly eye because suddenly the bandsaw looked like The Big Chicken in Marietta GA and I love it!!
I'm glad you keep in all the failures! Weirdly that makes me want to start doing workshop projects more than the perfect work I sometimes see. The finished product is both practical and iconic, the custom hardware really makes it beautiful. Also, nice MR2 at the start.
When you do something like this, especially on MDF which soaks up moisture, you can use a body filler spray paint (like we tend to use on 3D prints) to achieve a smoother surface finish.
This brings back memories of me building one of my first electric guitars. I think I redid the paint job 10 times, spent like 250 euros on lacquer in the process to eventually use the wrong clear coat. I gave the body away to a friend of mine.
Wow! It really seems like nothing wanted to cooperate with you on this project! Congrats on persevering through all of it and seeing it through, the saw looks fantastic!
The part that really makes this video wild is using a bandsaw to make another bandsaw. I am basically begging you at this point to use the smaller bandsaw to make and even smaller (maybe replica?) hand carved bandsaw so you can have them in decreasing sizes.
This was great to watch. Seeing how you go for satisfaction in your work no matter how many times you need to redo a process, is truly inspirational. Thanks for showing your mistakes as well as your successes, cheers
Laughs and some light-hearted creativity when I needed it. Thanks for including the mis-haps along with sharing your processes. Love your vids, Uri! All the best!!
Brilliant. Based on the title, I thought this was going to be some kind of machine cosplay, or a human powered bandsaw. I was not disappointed with what I got.
Hope you enjoyed the video! Go to ground.news/uri for an objective, data-driven way to read the news. Save 40% on the Ground News unlimited access Vantage plan with my link.
Slammed like button before 0:00! Have a nice summer : -)
You should sing more. Seriously.
Don't get me wrong. Avoid doing it professionally, but if you edit your videos with more singing it would definitly spread smiles everywhere like no one else. I know i would smile more. Keep 'em comming!
Uri, that link is broken, some extra symbols crawled in (like a pigeon to that store)
Looks like myan or aztec inspired bandsaw man👍😊
😂😂😂
Du bist das was man bei uns umgänglich als "schrägen Vogel" bezeichnet.
Genie und Wahnsinn
😂😂😂
These videos get slightly more insane every time. And that's why I'm subscribed.
Этим безумным инструментам не хватает собственных имен, таких же безумных.
Uri is demented, but in a good way. 😁 The animation in this video was great.
Just love the guy
This is magic; and Uri's work is black magic : -) Been here since the day 1.
Mee too
I've learned to stop asking why.
Maybe soon you'll ask "why not?" instead
Give me a lever shaped like a long pointing arm and a fulcrum that looks like an elaborately engraved nose and I can flick the earth like a booger.
-Archimedes' funky uncle, circa 244 B.C.
"elaborately engraved nose" lol
fling the earth like a booger? why not fling the entire solar system like flicking a little ant
That sounds very Pythonesque.
There is a very fine line betwixt insanity and genius and you walk it like a drunken sailor dancing a jig on a shaker table. I wouldn’t miss a single second of your videos. You are fabulous.
I've painted, stripped, repainted, restripped, etc. more projects than I care to recall, my friend. I raise a glass to your creativity AND persistence!
"Small percentage" viewer here. I came for the engraving all those years ago, but I stayed for the shenanigans. Informative and hilarious as always, Uri!
Me too. 💝
The irony in using a bandsaw to make a bandsaw. Uri your manic personality and “shenanigans” is what makes all us subscribers continue to come back.
I watched an amazing vid once of a guy doing just that with a lathe. All he had was a chuck and motor and used them to make a very profesional, well balanced and more torque than hell ever need, things we can do if time allows are almost endless🤔✌️take care.
@@peterdeans4635 That sounds very interesting! Do you remember the channel’s name? I’d love to check it out!
@@LorenXLX hi, sorry it was a while ago now, I remember it was an english guy, maybe look under machinery/l/ lath construction at the top of your home page. Sorry couldn't help more. Good luck take care👍
@@peterdeans4635 Thank you! I think I might have a couple channels in mind!
I've enjoyed your videos for so long and now I feel like I can finally give back in some minor way with a painting tip! When you mask an area, paint it once with the same color as the base color to "seal" the edges of the masking tape, *then* paint your second color. Hope that helps in the future!
What does this achieve?
I came down here to say that.
@@smashyrashy If it bleeds, the bleed will be the same color as the basecoat. The bleed will also seal up the small gaps between the tape and the surface of the work to keep the second paint color from doing the same.
Another tip is to burnish the tape with something smooth. Especially if you're using low tack tape. You can get really good results combining the two methods.
Oh, thanks for the advice! I paint too and although I don't usually have a problem with the paint going under the tape I'm glad I know this now.
In my daily life I frequently feel like I'm the weirdest person around and don't talk about my interests much. But when I'm watching Uri's videos for some reason this tension leaves and I can breathe freely.
Thank you Uri!
Same here - „we“ are not alone - only rare - best wishes from Austria - don’t stop making - stop thinking about yourself - feel free to be 😊
"why am I so weird?"
[Watches my RUclips subscriptions]
"Oh... How am I so normal?"
That yelling lathe mushroom was so funny. I can see you put a lot of effort into not just making your wonderful ideas but in your video and musical editing too . Your an amazing guy . Keep up the good work . Be happy.
I love the animations in your video! I know it takes a lot of work, but hopefully they will be a permanent fixture in your future videos.
I love all the little animations sprinkled throughout, it made it feel really special
That Clickspring reference. 😂
While walking upon youtube I came upon a shakespearean eccentric holding a chisel in the left and finger-less glove in the right and laughed at the pigeon sitting on his shoulder as it looked at me and said, _"I taught him everything he knows."_
Humbly subscribed.
I love the animation
I hope Make The Body will be available on Spotify
If everything went as planned I wouldn't like these videos as much. I enjoy watching someone get derailed by the same obscure issues that would affect any one of us. We have all needed serenity now.
"It's garbage... let's try again..." and then I saw A GIANT VERSION BEING BUILT and I laughed out really loud because I was thinking you were going to put an actually HUGE SWITCH BOX on the bandsaw because it was just easier to make!!
So happy RUclips has recommended your video. This channel is the best I've come across in a long time. Thank you for bringing joy on a miserable rainy Sunday afternoon here.
This channel is one man's decent into unfettered creative madness.
It's majestic.
I know you won't see this but man, it is sooo much easier and cheaper (after like 3 projects) than most people think to get into using spray guns instead of rattle cans.
(If you or anyone else that reads this chooses to go this route, research-
-The different types of guns/spraying (hvlp, lvlp, etc) and decide what's best for your compressor, projects and shop. (Probably lvlp for most non professional settings)
-Fluid tip and needle
(Surprisingly pricey so just go with a gun that comes with the one you want)
Thicker paint/finish needs a bigger hole to flow through
(For me- 1.6 and thin accordingly)
-Paint and finish
Just for simplicity, I go with the same type of solvent lacquer and conversion varnish for everything (mostly lacquer rn, want to move 100% to con var soon), just get the same type in a primer, paint base, clear, sealer, etc. never deal with chemical incompatibility.
Dyes/tints to make your paints
I had no money for a long time, so I just got straight lacquer, used titanium dioxide and whatnot to make my own paint bases, thinned for sealers, etc.
- A scale and notebook for logging and replicating things.
If you don't need to mix 10 gallons at a time with milligram precision, a decent scale is very reasonably priced. You can also make a less precise scale still work with some fancy work arounds.
-Solvents and additives
I just have lacquer thinner, acetone and other misc solvents, I use the ones that flash off faster to speed things up, I use the slower ones as retarders. Obv the real stuff will often work a bit better but I ain't made of money lol it works
-Compressor
For small projects you really don't need much, set your gun and finish/paint up for spraying at as low of a pressure as you can get it to still spray nicely.
I used a small pancake compressor for a ton of stuff for a long time.
For smaller stuff an airbrush is awesome, they can run off a tiny compressor that doesn't even have a tank and they cost like $15 (and somehow still work fine), the orings don't play nice with the harsh solvents I use though. You can replace them with teflon if you want but I haven't bothered yet, I just make sure to not take the air brush apart until all of the solvent has had plenty of time to evaporate and leave the rubber.
Idk what it is about most air tools but you can buy the cheapest ones on the market and they still usually work fine. Usually need a bit more care and time in setup but still. Can't say the same with almost any other kind of tool
I for one found this very informative and useful! Thanks 👍🏻
Ditto
Thankyou for taking the time to share this information with us, I've got some projects coming up and ill definitely keep this in mind. Cheers :)
The fact that this channel doesn't have 50 Billion subs is CRIMINAL. Literally the only ORIGINAL content on the platform.
I think we all went through that phase as children where we wanted to be a band saw when we grew up. Love the animation!
I never know what Uri will come up with next… but I always love it!!!
👍🏻👍🏻👍🏻❤️❤️❤️
Creative, gifted, funny, spontaneous, artistic, crafty, smart and fearless! This is why I watch Uri! 🥰
Artistic or autistic
It's nice to see an honest process with struggle and setbacks and humour. Wild and fun video concept too, as usual.
You're stuff is always a work of art. I mean the whole video. I've been working in graphics, animation and 3D for 25 years and I think you're exceptional. OK, enough praise.
I love that you keep so much of the trial and error! It's really how it goes sometimes where you're bangin your head against a wall trying to make it work and it takes several tries. Love seeing the process for real and not just the golden takes.
This was probably one of my favorite episodes yet, not for the many sad mistakes / end results you didn't like but for your humor. I really do appreciate that you show all your mistakes, because no one makes everything perfect all the time. Also, it shows that you have a certain standard for yourself, and once in a while it's ok to just f**k it.
You're reliability one of my favorite entertainers on any platform. As always, may you have success in all of your endeavors in the future. Especially involving paint.
I really respect your perseverance for not giving up
It's very comforting to know a man of such distinguished skill and creativity also struggles with paint like I do
Uri thank you. Your suffering has put life’s troubles in perspective for me. And the bandsaw is beautiful.
god I love you uri been watching for years and you still haven't put out a single bad video
Awesome video! I have a trick for masking small features that works great. After applying the masking tape, lightly spray or brush it with the same color as the base. This step helps seal any tiny gaps in the tape. Once that's dry, you can apply the color you want to mask off without worrying about it bleeding under the tape. It is an extra step, but this method ensures clean, sharp lines every time.
Uri's videos are ones you like before you even start watching.
If there was ever a video that I would want my entire internet algorithm to be based off, it would be this one. Your personality, process, skills and peculiarity are on the highest level. I appreciate whatever it is that you do.
this video is such an accurate honest representation of the process of making something
I have nothing in common with your wood working skills but I love all your videos, they are quite creative and have allot of personality in their presentation compared to most other channels.
Merry Christmas Uncle Bob
I found another brother. You are awesome. Thank you for the smiles.
Holy fuck that opening animation is spectacular
I swear the production quality has gotten so much better/unhinged recently and Im all about it 🤌🤌
I’ve been subbed for years, your videos just keep getting better & better! Your creativity makes me happy, thanks for that. 😊
A wonderful work of art!
The amount of effort put into this video-the animations alone even is so impressive
Fantastic video...very entertaining as always....and as always love all the pieces of art you create....
I’ve had a right old week, seeing a new Tuchman at the end of it is just lovely. Not watched it yet, but my thought on “I turned myself into a bandsaw” is yep, not surprised at all.
What sticks with me is failure is unavoidable. But heck, this is how you learn new tricks. Thank you for showing the whole journey.
The iterations of the thumbnail for this video are just as good as the video itself
I almost forgot how amazing this channel is, thanks random recomendation for reminding me to watch all the videos on this channel AGAIN!
Hey thank you for showing your failures. I had a day of painting auto body, fenders etc. That day, everything I had wrinkled to death. An entire days worth of work gone. So many failures corrected throughout the day only to run into it again. This helps remind me that frustration and steps back are normal.
Another pro tip is make sure you check whether spray paint is an enamel, lacquer, acrylic, or urethane and make sure to only use like products to keep it simple but you can still apply any finish over a lacquer if it is fully dry and your nose will let you know if it is
Pure genius. Certainly not run-of-the-mill. THe pigeon is a good touch!
I truly hope you are having a good time, Uri, in the big picture! Because I am enjoying every one of your videos. You really are a great artist...and by also sharing your mistakes and unfruitfull endeavors (which honestly are entertaining) you make the crafting process real and accessible. Your creativity, though, is beyond compare. Please keep on shenaniganning! ❤️
I love everything about this
Im so glad I get to be here to watch uri slowly descend into madness and make cool things
You havent tried making a mill yet (I think?), you should make yourself into a mill like the Boris Artzybasheff artworks
Matthias Is working on one too if you want to check his out but he’s into wood working more.
He's an inspiration for sure!
Things like the intro animation are adding a new dimension to the channel, it's fun to see! Heartbreaking when you had to paint it a third time.
A little Clickspring mock? Very nice.
you poor man.... I have enough nightmares keeping my Laguna running smoothly, let alone have to worry about making parts for it... Godspeed!
I commend your resolve and respect your sunken-cost-fallaciery... The animations and sound are wonderful in this one, I look forward to the inevitable PigeonSaw 2.0!
one of the reasons i love your videos so much is, it reminds me of my old self, creative motivated autistic and happy, i'm now just, creative unmotivated autistic and sad
Oh my gosh, I felt the pain with the painting struggles! 😫
I've always loved and respected the entirely unique content you make, but I cannot explain how happy it makes me to see you not only find but also perfect your stride. Every element down to the music and the edit, you inject your creativity into every aspect of your videos, and I just wanted to say that I appreciate all of it more than you can know. Cheers.
The amount of effort and creativity in each video doesn’t go unnoticed
Your videos always scratch something in my brain of wonder and nostalgia. As much as I wish you could upload more I’m happy you don’t rush videos because they’re awesome! Serenity now!
I love how you show your mistakes and potential failures, it really shows how much time and effort goes into your videos. Good for you Uri, always happy to find out what you've been up to
The CGI in this video outperforms Marvel Avengers by a mile (or should I say kilometer?)
love seeing you bounce back from the failures
With every project the level of genius and insanity increases. And I LOVE it
genuinely so sad for your failed experiments ... i could see the soul get drained from your body - gret video as always
It's always a pleasure to see what you are up to. You follow your own vision and it always great!
I love how much atention you put into the details. I was curious why you hadnt added video and now I know why.
You glorious weirdo -- thank you for being on my timeline!
The amount of patience you have man. Way more than i would have. But yea MDF is a pain. I was trying to do a paint job on an old speaker box and ran into similar problems. So i just used spray adhesive and stuck fake leather on it that i got from hobby lobby. It was very cheap too. So it worked out
I love your combination of artistic genus and above average fallibility.
You can recognize a great artist by his ambition not only to work with tools but also to be the tools, love your delicious shenanigans Uri.
As ever a most entertaining and thought provoking work. I hope you have not suffered too much from the tribulations in this creation. As regards your burgeoning singing career however I fear I may have some bad news.....
אורי, הכרתי אותך בבצלאל, עוקב אחרי כל סרטון שלך כבר שנים! לא מפסיק להפתיע :)
That was a challenge! Well done Uri for persevering and keeping us entertained. I hope you have some nice weather and you can go smell the flowers now.
Your video presentation, with the simple line drawing animation in places, is 🔥🔥🔥 Magnificent. And original.
I love your mad ideas and execution of those ideas Uri. You're a truly unique craftsman.
I'm gonna guess this was the happiest accident and not your actual inspiration, but I gasped when you added the googly eye because suddenly the bandsaw looked like The Big Chicken in Marietta GA and I love it!!
I'm glad you keep in all the failures! Weirdly that makes me want to start doing workshop projects more than the perfect work I sometimes see. The finished product is both practical and iconic, the custom hardware really makes it beautiful.
Also, nice MR2 at the start.
When you do something like this, especially on MDF which soaks up moisture, you can use a body filler spray paint (like we tend to use on 3D prints) to achieve a smoother surface finish.
0:27 The internet rotted my brain. All i can see is yet another type of wojak.
Atlas Chud
This brings back memories of me building one of my first electric guitars. I think I redid the paint job 10 times, spent like 250 euros on lacquer in the process to eventually use the wrong clear coat. I gave the body away to a friend of mine.
Wow! It really seems like nothing wanted to cooperate with you on this project! Congrats on persevering through all of it and seeing it through, the saw looks fantastic!
By far the best music on this channel, is the music Uri produces himself. Corny, but glorious, it’s cornious!
It's a bummer that you got rid of that beautiful and unique figure pinstripe. It was so cool.
The part that really makes this video wild is using a bandsaw to make another bandsaw. I am basically begging you at this point to use the smaller bandsaw to make and even smaller (maybe replica?) hand carved bandsaw so you can have them in decreasing sizes.
What a kerfuffle! But we got there in the end. Thanks for the journey Uri.
This was great to watch. Seeing how you go for satisfaction in your work no matter how many times you need to redo a process, is truly inspirational. Thanks for showing your mistakes as well as your successes, cheers
This is the greatest channel on RUclips
Quoting Frank Costanza and what not, you are a sick sick individual and I mean this as a compliment. I love it, this world needs more people like you.
Laughs and some light-hearted creativity when I needed it. Thanks for including the mis-haps along with sharing your processes. Love your vids, Uri! All the best!!
Love the style and skits in this one. Complete unrestricted creative flow. Absolutely wonderful to see :)
Uri, you are a mad man, and I appreciate that.
Brilliant. Based on the title, I thought this was going to be some kind of machine cosplay, or a human powered bandsaw. I was not disappointed with what I got.