Good video. This transmitter and receiver are excellent. I got the transmitter with two receivers and the lipo battery for $50 on Amazon. My Spektrum receiver that died was $90 because of the AVC. On my Felony, the built-in gyro in the HotRC works almost as good as the Felony stock AVC\gyro function. For anyone wondering, i use the gyro at 25% sensitivity with 100% travel setting. Haven't tried the anti-shake \ anti-wobble settings, because my car is 15 pounds, so i don't get any wobble at 25% sensitivity. Thanks for making a great transmitter and receiver combo affordable. I'm getting some underbody light strips tomorrow, with the remote on\off function, so this video will help me set them up. 👍🏽👍🏽
Except for the F-05A receiver, which can only be used with the HT-5A and FHT-6A remote controllers, all other HOTRC receivers are compatible with the remote controllers.
@@HotRC-Sophy Ohh i understand now. The reason I like F-01AT receiver is because I can notice that I could control lighting system with transmitters very much better and easier without any complication issues. The RC Pistol Transmitter is cool. But as for me, I’m more into the surface sticks transmitter with FPV monitor/Display screen to control lighting systems that are specifically for RC drift cars, RC Rock Crawlers, any RC vehicles with wheels on a ground. The sticks on left side is up to drive/down to reverse only and on right side is turn left/right only. I like to use both of my hands with sticks transmitter to control RC vehicles on grass and rocks. I notice these HOTRC sticks transmitters are usually designed for airplane, helicopter, drone, other limited DIY vehicles. The two sticks movement both on the transmitter move up and down and left and right sides are sometimes confused to Users who tend to use RC drift cars, rock crawlers, Rally race cars to control. My question/feedback to you is Maybe HOTRC HQ could create and incorporate new sticks transmitter contain FPV monitor to view behind windshield on RC cars, trucks via FPV camera and easy to read of Display Screen for steering, speed trim adjustment along with toggle a buttons to turn on/off (open/closing methods) to control regular lighting systems (headlight, brake light, turn signals, etc) plus more channels to control additional light bar accessories for mount on roof and bumper, motor winch of RC Vehicles that could directly work with F-01AT receiver. I was research about a company called Futaba that sell 2.4GHz T-FHSS 4GRS surface sticks transmitter and 2.4GHz T-FHSS SR 7XC sticks transmitter. They look great, but their cost is very ridiculous expensive and hard to read Display screen with too much of different programmables and adjustments plus very complication. I love that HOTRC offer very much better quality and very affordable price with transmitters for RC vehicle users like me who are on tight budget.
Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD, ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE.. other need to add please make all binding video for all your available receiver especially micro receiver F-04B
It can be done, but we generally do not recommend customers to use the F-04A receiver with the CT-8A remote control, because the F-04A receiver does not have a signal return function, so many functions of the CT-8A remote control cannot be realized
Good video. This transmitter and receiver are excellent. I got the transmitter with two receivers and the lipo battery for $50 on Amazon.
My Spektrum receiver that died was $90 because of the AVC.
On my Felony, the built-in gyro in the HotRC works almost as good as the Felony stock AVC\gyro function.
For anyone wondering, i use the gyro at 25% sensitivity with 100% travel setting. Haven't tried the anti-shake \ anti-wobble settings, because my car is 15 pounds, so i don't get any wobble at 25% sensitivity.
Thanks for making a great transmitter and receiver combo affordable.
I'm getting some underbody light strips tomorrow, with the remote on\off function, so this video will help me set them up.
👍🏽👍🏽
Thank you for your likes and support~
Oh this is Awesome. Thank you. Much love to you. Love these Controllers.
How do we adjust or set steering trim , throttle trim, speed trim, etc with this transmitter
That realistic lamp can be used without additional modul, right?
The lighting option appears to be under control, where you find Gyro, but its missing the additional menu on my controller.
Hi, I love it! Hey, I just wonder if HOTRC DS-4A/HT-6A transmitters could work with F-01AT receiver?
Except for the F-05A receiver, which can only be used with the HT-5A and FHT-6A remote controllers, all other HOTRC receivers are compatible with the remote controllers.
@@HotRC-Sophy Ohh i understand now. The reason I like F-01AT receiver is because I can notice that I could control lighting system with transmitters very much better and easier without any complication issues.
The RC Pistol Transmitter is cool. But as for me, I’m more into the surface sticks transmitter with FPV monitor/Display screen to control lighting systems that are specifically for RC drift cars, RC Rock Crawlers, any RC vehicles with wheels on a ground. The sticks on left side is up to drive/down to reverse only and on right side is turn left/right only.
I like to use both of my hands with sticks transmitter to control RC vehicles on grass and rocks.
I notice these HOTRC sticks transmitters are usually designed for airplane, helicopter, drone, other limited DIY vehicles. The two sticks movement both on the transmitter move up and down and left and right sides are sometimes confused to Users who tend to use RC drift cars, rock crawlers, Rally race cars to control.
My question/feedback to you is Maybe HOTRC HQ could create and incorporate new sticks transmitter contain FPV monitor to view behind windshield on RC cars, trucks via FPV camera and easy to read of Display Screen for steering, speed trim adjustment along with toggle a buttons to turn on/off (open/closing methods) to control regular lighting systems (headlight, brake light, turn signals, etc) plus more channels to control additional light bar accessories for mount on roof and bumper, motor winch of RC Vehicles that could directly work with F-01AT receiver.
I was research about a company called Futaba that sell 2.4GHz T-FHSS 4GRS surface sticks transmitter and 2.4GHz T-FHSS SR 7XC sticks transmitter. They look great, but their cost is very ridiculous expensive and hard to read Display screen with too much of different programmables and adjustments plus very complication.
I love that HOTRC offer very much better quality and very affordable price with transmitters for RC vehicle users like me who are on tight budget.
Hi, i just bought the new CT8B..is it normal that the roller is tight and hard to press?
Hello, could you make a tutorial explaining the "coaching feature" with two Tx CT8A. Regards. Louis
We published it a long time ago, you can check out this issue: ruclips.net/video/uvaT_65eBIY/видео.html
Can the F-01AT receiver be connected to the latest CT-8B 10channel transmitter?
I have 1.040 as app version in my CT8A. I am only getting gyro settings but no light controls. Is there a way to get it or update firmware?
did you find a way to update firmware?
@@pootielollolzy4359 No, I couldn't find the firmware files. HOTRC is also not helping.
Hopefully there is an update for change the colour for interface it's hard to see within green and grey or blue it's suck colour of choice from factory, and change naming for some like EPA,TRIM, REV, PROS& CONS, EXPONENTIAL CURVE, HOTRC COMPANY PLEASE TAKE AN A GOOD, ACTION JUST DON'T SILENT OKAY, THIS IS SO IMPORTANT FOR GOOD PRICE AND EASY ACCESS INTERFACE.. other need to add please make all binding video for all your available receiver especially micro receiver F-04B
hi, is it able to connect to pc through the type-c port for vrc pro?
how to update firmware? to run light control??
What type of 18650 battery ? Button or flat
Button
How to update firmware?
Hi hallo can i bind ct 04 receiver to this transmiter ct08 ?
It can be done, but we generally do not recommend customers to use the F-04A receiver with the CT-8A remote control, because the F-04A receiver does not have a signal return function, so many functions of the CT-8A remote control cannot be realized
@@HotRC-Sophy thanks for ur information cause i want to buy ct6A receiver ,its hard to find ct8a receiver only without transmiter
@@versus8330 In fact, except for the F-04A receiver and the F-05A receiver, other receivers can be used with the CT-8A transmitter.
@@HotRC-Sophy thanks i already test on F-06A and its worked, if i turn on 2 binded rx can i select one or both of them will connect?
@@versus8330 The remote control can perform code matching with multiple receivers at the same time
bad signal made my car wrecked