Installing a Lokar Kickdown Cable on a 904 or 727 Torque Flight Transmission
HTML-код
- Опубликовано: 9 сен 2024
- Learn how to install a Lokar kickdown cable in a 1974 Roadrunner with either a 904 or 727 Torque Flight transmission. Enjoy! Please like and subscribe 🤩🤩🤩
Thank you for watching!
Thank you! This was very helpful since the cable comes with zero instructions
Owing a real Road Runner today is money in the bank.
so true
Lokar makes a complementary throttle cable replacement too..... I would highly recommend doing both.
Perfect explanation.
Nice work. Made things easy to install.
Awesome, glad to hear. Thank you!
Great job!
Very cool and a thumbs up liked.
This is not quite as simple as he is showing. The pressure lever he is attaching the cable to under the car is from center to center of attaching hole aprox, 2 3/4''. The other end of the lokar cable attaches to the carburator arm which is aprox center to center of mounting hole 1 3/4''. The passing gear is a 1 to 1 ratio, meaning when the carb arm or lever moves 1 inch the pressure or passing gear lever has to move 1 inch.( no more, no less ) If this is not done right it will not function as it should. Too little pressure on the pressure lever can damage the transmission over time. I drilled the passing gear or pressure arm to match the carbutator arm lenth t get the 1 to 1 ratio that chrysler requires...
Glad you know how to do it
Thank you for that tidbit of information. Simply knowing it is 1:1 is what I have been looking for. I converted to a Holly Sniper EFI and I installed a Lokar cable. I have been looking everywhere for the geometry. Thank you!
Very helpfull!
Nice work....
Nice
Thank you!
Is it just me, or does it look like the carb was made by Magneti Morelli and Whataburger?!! 😁
How do you know where to set the tension?
The Lokar paperwork shows a starting point but from there depending on your shift points you may want to adjust the cable a little bit at a time until you are happy with the way it shifts into second and third. Hope this helped.
Does the bracket come with the cable? On summit it’s just the cable I think, can u provide a link on where you bought it? Thanks
Where did you get the bracket for the carb? I have a Holley
Sorry for late reply. Lokar sells something, but we usually make one.
I installed this kit on my 727 and it has never shifted correctly since, and i have adjusted it multiple times.
.
Tell me how it shifts? When you put it in drive and start driving is it shifting into second real quick or is it banging a hard second real late?
@@taylormademusclecars when it's cold, before it has shifted a few times, it will over rev in first. Once it's warmed up, it will usually shift ok, but sometimes if I floor it while doing say 35, it will downshift as it should, and then upshift at the wrong time
How did work?
Worked out great, good product!
stock one is better
yeah, we agree. When the carb is changed out to after market the factory linkage never configures properly.
Cable should be adjusted at wot
You’ll need to first have everything hooked up as it should be then with the car off opener your throttle by hand 100% make sure your kick down cable is moving freely at the transmission take it for a ride and see if you like the shift point of 2nd & 3rd gear if you (don’t) then start adjusting your new cable at the carb one way or the other till you find a happy shift point
nice information I'm restoring a 1966 chrysler imperial i have the 727 tranny what is the kit number for the kick down cable.
Thank you, that sounds cool! The kit number is KD-2727
How long does it take to do this job? I just had mine done at a transmission shop they said 3 hrs