Hi Edward - Ive maneged to create some fixtures in Magic 3D, that fits my fixtures in Qlc+. It appears that the two programs are correctly connected.The DMX level 2D overview in M3D is responding correctly to the cues Im sending from Qlc - but the there are no lights turning on in the 3D viewer? Did I miss some setting somwhere? thanks in advance best Jacob
Some downloads of this program do not work. See my notes Below. Also, sometimes just restarting the program gets it up and working Hello I did a bit of research on Magic 3D Easy View so here is what I found. You can download a working version of Magic 3 D Easy View Here: magic-3d-easyview.software.informer.com/download/ A couple of notes: When I was installing this my antivirus software flagged it for unknown files and I had to click “allow” in order for it to install. It looks like a false positive since I have had no virus issues when running the software. I would recommend restarting your computer after install. Make sure you have QLC+ set to output ArtNet Universe 1 with the address of your computer if you are running both programs on the same computer. For example mine is set to output Universe 1 ArtNet 10.0.0.25 Make sure you select ArtNet when starting Magic 3D EasyView and set up your universes. If it doesn’t work the first time, close the software and reboot the program. Some people are having trouble accessing the artnet. I found this info on the QLC+ Blog: I struggled quite some time on getting the Art-Net to work on ALL my computers. On some it did work right away, on other: no luck. What seemed to be the problem: multiple network interfaces! When I disabled my VMWare virtual network interfaces (and therefore had a system with just one network interface), I was able to use Art-Net in Magic 3D Easy View. So: make sure your computer has only one (enabled) network interface, and you should be able to use Art-Net. I would make sure that you uninstall the current version of the program before installing this version. The program will say DEMO but most features will function without limits. The Full version of the program is no longer available. Ed Richards
Hi Edward - Ive maneged to create some fixtures in Magic 3D, that fits my fixtures in Qlc+.
It appears that the two programs are correctly connected.The DMX level 2D overview in M3D is responding correctly to the cues Im sending from Qlc - but the there are no lights turning on in the 3D viewer?
Did I miss some setting somwhere?
thanks in advance
best Jacob
Some downloads of this program do not work. See my notes Below. Also, sometimes just restarting the program gets it up and working
Hello
I did a bit of research on Magic 3D Easy View so here is what I found.
You can download a working version of Magic 3 D Easy View Here:
magic-3d-easyview.software.informer.com/download/
A couple of notes:
When I was installing this my antivirus software flagged it for unknown files and I had to click “allow” in order for it to install. It looks like a false positive since I have had no virus issues when running the software.
I would recommend restarting your computer after install.
Make sure you have QLC+ set to output ArtNet Universe 1 with the address of your computer if you are running both programs on the same computer. For example mine is set to output Universe 1 ArtNet 10.0.0.25
Make sure you select ArtNet when starting Magic 3D EasyView and set up your universes. If it doesn’t work the first time, close the software and reboot the program.
Some people are having trouble accessing the artnet. I found this info on the QLC+ Blog:
I struggled quite some time on getting the Art-Net to work on ALL my computers. On some it did work right away, on other: no luck. What seemed to be the problem: multiple network interfaces! When I disabled my VMWare virtual network interfaces (and therefore had a system with just one network interface), I was able to use Art-Net in Magic 3D Easy View.
So: make sure your computer has only one (enabled) network interface, and you should be able to use Art-Net.
I would make sure that you uninstall the current version of the program before installing this version.
The program will say DEMO but most features will function without limits. The Full version of the program is no longer available.
Ed Richards