A lil trick used in all assembly or building applications......leave everything loose until you have it all assembled......then crank it down tight.......gives you bit of play and adjustability.... Makes process alot easier
These running boards are really nice. I watch all your videos, and actually live right down the street from you.I just bought a 2011 Jeep Grand Cherokee overland and would love to have a set of these on my Jeep.WIn WIN.
@@Paisteboy I ride an 05 Rev. I have talked to your brother a few times when he was working at advance Auto on dewey ave.he actually gave us a shout out in one of your videos when you were up at Christie's. We would love to catch up and ride with you guys at some point
Hey, it's Paisteboy. As long as you are from the USA, you are the winner of the GIVEAWAY set of APS running boards. Send me your email address to further communicate for the prize.
Thanks for sharing! I just drove home my new 2021 GMC Sierra Elevation 1500 double cab with the 3.0L diesel, and was hoping to do the APS I-Boards again, but was concerned about the installation because I was looking for the mounting that uses the cab bolt like I had previously, but this looks solid. I had a previous generation APS I-Board on my previous 2014 Sierra Denali HD that had holes with threaded inserts that corroded. APS sent me replacements and they had the t-track like you showed, which as a significant improvement. Scott
Trick is to leave everything loose then when u got every bolt in every hole tighten it down baby I’m not very handy but even I did it with no help from RUclips or manual
Nice. I had them on my last truck. I've had this truck for about 11 months now without running boards so it's nice having them again. Thanks for watching Mark.
@@Homeboy174 You can follow me on Facebook. I usually post my rides there before we take off or if we have a plan for the next day or so it will be posted and you'll know where we'll be.
Right on! This was the easiest install of them all and this is the third set I've installed. They really simplified the process between APS iBoards improvements and GM having the mounting holes ready to go. Good luck and thanks for watching Dan.
Nice! At least your choice in trucks is good, LOL :-) Good looking truck and I really like those side steps. I drive a 2009 GMC Sierra currently and will more than likely buy another soon. I've had a couple of Sierra's now and both have been great. WIN!
I just realized that I said that I have a 2019 Chevy Silverado but I have a 2019 GMC Sierra 1500. Oops... I had the 2017 Silverado until I got the GMC.
Good job guys. How come Zuke was doing all the work What up with that Zuke. LOL 😂. They look sharp brother. They would be a nice WIN for a viewer. Any snow on the way for you guys?
I had to film and make sure that the video was well recorded. The tripod wasn't going to cut it. I guess I could have had Mark do the recording but he already has the lift at his level and wouldn't have fit underneath at my level. lol. Being a sponsored video it can't be poorly made. I know you're just joking around about it but it really is now a one person easy install compared to the previous models. Also having the lift makes it even easier. Thanks for watching and good luck Tracey Boys!
I'm not too worried about getting places but I was expecting to have it by now. As far as a hint on the trailer, I will tell you that it was not made in Boonville.
Yes. I talked to the salesman on Wednesday because that was the 4 weeks he thought it would take and he told me that I would have to wait until around Christmas now. I'm kind of ticked off.
I agree. That's why I'm understanding for now. It just sucks that I won't have my new trailer for the first ride of the season and sold my old trailer.
PA EMT is the WINNER!!!
Win.win.win. semper fi. See you in the ADK.
Good luck. Follow me on Facebook and Instagram if you want to know when I'll be in the ADK. Thanks for watching.
Win Hope you ship to Canada
Thanks for watching.
A lil trick used in all assembly or building applications......leave everything loose until you have it all assembled......then crank it down tight.......gives you bit of play and adjustability....
Makes process alot easier
I do that at times as well. Thanks for watching.
These running boards are really nice. I watch all your videos, and actually live right down the street from you.I just bought a 2011 Jeep Grand Cherokee overland and would love to have a set of these on my Jeep.WIn WIN.
Cool. Well good luck then. What sled do you ride? Thanks for watching jim bo.
@@Paisteboy I ride an 05 Rev. I have talked to your brother a few times when he was working at advance Auto on dewey ave.he actually gave us a shout out in one of your videos when you were up at Christie's. We would love to catch up and ride with you guys at some point
@@jimbo5849
OK. Cool. I think I remember him mentioning that back then. Yeah. A ride would be cool. Reach out when we get some snow.
Win from PA.. Great vids
Thank you. Good luck!
Hey, it's Paisteboy. As long as you are from the USA, you are the winner of the GIVEAWAY set of APS running boards. Send me your email address to further communicate for the prize.
Thanks for sharing! I just drove home my new 2021 GMC Sierra Elevation 1500 double cab with the 3.0L diesel, and was hoping to do the APS I-Boards again, but was concerned about the installation because I was looking for the mounting that uses the cab bolt like I had previously, but this looks solid. I had a previous generation APS I-Board on my previous 2014 Sierra Denali HD that had holes with threaded inserts that corroded. APS sent me replacements and they had the t-track like you showed, which as a significant improvement. Scott
You're welcome. Yes. They upgraded the mounting style and makes the install easier.
Sound like ur showing off ur new gmc to me
Nice.. They look awesome. Very easy install. Great work guys. 👍🏼👍🏼 WIN !!
Thanks. Yes, very easy. Good luck and thanks for watching Sometime is Now.
Win
Thanks for watching.
Trick is to leave everything loose then when u got every bolt in every hole tighten it down baby I’m not very handy but even I did it with no help from RUclips or manual
Nice job.
Win win win. Those look real sharp.
Thanks for watching.
Looks great! I got these but in all black for my 21 Silverado RST. Looking forward to installing them soon
Cool. The all black will look sharp.
Those are really nice . Running boards are a must IMO on any truck. I use mine everyday to get into my Toyota Tundra, WIN.
Nice. I had them on my last truck. I've had this truck for about 11 months now without running boards so it's nice having them again. Thanks for watching Mark.
I have a 2021 GMC Sierra sle double cab how much is the running board you all put on the white GMC one year ago let me no
Can't wait for the snowmobile videos. Win
Me too. Snowmobile videos = RIDING!!! Good luck and Thanks for watching Jed.
Im a Wyoming County guy. Always looking for you guys on the trails. Safe riding this season!
@@Homeboy174
You can follow me on Facebook. I usually post my rides there before we take off or if we have a plan for the next day or so it will be posted and you'll know where we'll be.
That was easy peasy! Win!
Right on! This was the easiest install of them all and this is the third set I've installed. They really simplified the process between APS iBoards improvements and GM having the mounting holes ready to go. Good luck and thanks for watching Dan.
Great Vid, can’t wait for the snow content. Win!
Thanks. Me too! Thanks for watching.
Do you know the size and type of the bolts used to install
No. Sorry I don't. My guess would be 1/4-20.
Nice! At least your choice in trucks is good, LOL :-) Good looking truck and I really like those side steps. I drive a 2009 GMC Sierra currently and will more than likely buy another soon. I've had a couple of Sierra's now and both have been great. WIN!
lol. Cool. Thanks and Good luck! Thanks for watching papa Wattz.
Bring on the snow! Win
Thanks for watching.
Win! Looks good! Nice product
Thanks for watching Rob.
I just realized that I said that I have a 2019 Chevy Silverado but I have a 2019 GMC Sierra 1500. Oops... I had the 2017 Silverado until I got the GMC.
Nice running boards! Win!
Thanks for watching.
Looks like a win
Thanks for watching.
They look really nice! Win
Thanks for watching.
How the coating holding up where it’s black ?
The black part is holding up just fine but the end caps are oxidized very badly.
@@Paisteboy yea I was gonna go with the all black version but same brand
@@outen21
That sounds like a great option.
Another great video Buddy!!! Win!!!
Thank you and good luck!
looks great! WIN
Thanks for watching.
They look great bud. U might consider undercoating with krown to keep that truck rust free.
Not a bad idea. Thanks for watching.
Win win 👍🏾
Good luck and thanks for watching David.
Good job guys. How come Zuke was doing all the work What up with that Zuke. LOL 😂. They look sharp brother. They would be a nice WIN for a viewer. Any snow on the way for you guys?
I had to film and make sure that the video was well recorded. The tripod wasn't going to cut it. I guess I could have had Mark do the recording but he already has the lift at his level and wouldn't have fit underneath at my level. lol. Being a sponsored video it can't be poorly made. I know you're just joking around about it but it really is now a one person easy install compared to the previous models. Also having the lift makes it even easier.
Thanks for watching and good luck Tracey Boys!
That sucks about the trailer, maybe Shag will take you if it snows before Christmas
Give us a hint, is it being made in Boonville?
I'm not too worried about getting places but I was expecting to have it by now.
As far as a hint on the trailer, I will tell you that it was not made in Boonville.
First view. Great vid as usual. Thank you.
Awesome, thank you!
Nice looks sharp! Where did u get that ski doo jacket??
I ordered it online.
Any word on your new Trailer ?.
Yes. I talked to the salesman on Wednesday because that was the 4 weeks he thought it would take and he told me that I would have to wait until around Christmas now. I'm kind of ticked off.
Oh well with Covid everything is taking longer to get, including snow... I'm in Manitoba end of November and nothing for snow .
I agree. That's why I'm understanding for now. It just sucks that I won't have my new trailer for the first ride of the season and sold my old trailer.
Win
👍