I am new to laser engravers and watched dozens of videos to learn how to use my new D1 pro 10w. Your videos have been far more informative and useful than all of them. Thank you
I reverted to XCS after playing with Lightburn for 6 hours. Any software at my age is a challenge but I have to say your tuturial was both refreshing and constructive. I hope, like you stated the team at Xtool have watched and listened. Thank you Sir !
You are very welcome. Lightburn is a great program for sure so I would suggest maybe another look at it when you are more comfortable but XCS isn’t too bad either for a proprietary program.
This is OUTSTANDING…. As a new user of a recently acquired D1 Pro having an explanation for the various menu options is critical…. and you nailed it! I also watched your video on engraving on tapered cylinders and was able to have most of my questions answered. I’ve subscribed to your channel and look forward to continuing to acquire necessary knowledge to enjoy this new hobby.
For a electronically challenged person like me, this was awesome. This is the 3rd tutorial I've watched or tried to watch. The others went through them so fast like I was already familiar with everything. You really took the time to explain and I thank you. Will refer back to this often I'm sure 😊
Thank you for editing in the zooms whoever edited this! Made it so much easier to follow along with for someone with bad vision who watches content on phones/tablets. My eyes aren’t straining. Seriously. Thanks. ❤
You are very welcome! I thought I may have been too heavy handed with it but I know when there is a lot going on in the screen it helps to zoom in a little bit at times.
@@BusterBeagle3D When it seemed important, you zoomed in just enough. You didnt over do it either. Nothing is perfect In editing. But this was a great job. The zooms don’t matter so much for desktop or tv watchers but for us mobile guys they are life savers.
SUPER helpful! There's a couple of really basic things I wish you had covered. Maybe they are in another video. 1) How does your laser know where you've placed the wood to be engraved??? 2) How to set the proper height for the laser head. a-on flat surfaces and b-not flat surfaces (i.e. a belt buckle, etc.). THANKS!!!😊
Half the challenge of any software is being aware of what it can do. This video is great at quickly touching many capabilities and will certainly be a go-to reference in the future on how to do things. Thanks so much for being so helpful without droning on in too many details that make one lose interest
Thank you for this comprehensive video! I just bought the S1 and I am new to the whole laser world. I was looking into it a few years ago, but couldn't swallow the cost.
Well, finally info on XCS. I've got the D1 (not Pro) and as time has gone on, it worked fine with LightBurn. Then came the upgrades, and now LightBurn will not respond to the power settings. It burns very hot regardless of the settings. So, needless to say XCS is all I've got. It operates beautifully with Xtool's software, so the machine is not a issue. However, upgrades to firmware, etc....LightBurn just doesn't work. Xtool said on their site that sometimes LightBurn and the D1 WON"T work and it's an anomaly and they are not responsible. So, at any rate, I'm glad you have this video, it's very helpful and hope no one runs into this "anomaly" doesn't happen to them.
It would be great if they had a centering button on the software which would bring the laser to absolute center as opposed to just the top left corner.
Great tutorial. Best I've watched of half a dozen. I'm using a 40W D1 Pro, and XCS has changed some since the beta -- though still no absolute coordinates button -- but it's still super useful. Thanks!
Buster...........hello again....firstly, thank you so much for this tutorial, I love it. A couple of questions, if I may...........1. Why does the image look jagged (even on straight lines!) when I use the outline feature? 2. Why won't some images load into Creative Space? 3. Is there a way of saving an image, so that the entire image could be scaled, instead of the individual elements to it? Sorry to bombard you, but I would really appreciate your excellent insight into this. Thank you again, Sir!
thank you for you information. very helpful. not sure I understand the absolute X Y but I will watch again see if I can get my pea size brain to understand. thanks again
I'm sure you will get it. Essentially the whole machine has a coordinate system where the X goes left to right and the Y goes back to front. The (0,0) position of the system is at the HOME position in the back left corner. So if you wanted to burn at (x200, y200) that means the laser goes right 200mm (X position) and forward 200mm (Y position). That way if you had a grid burned onto a spoil board you would be able place something to engrave at that location and know exactly where the work is going to engrave. Hope the cleared it up a little bit and not just confused you more.
m My XTool D1 Pro arrives tomorrow Thanks you for sharing your knowledge on this topic. Also nice to see our neighbors to the south embracing the metric system...lol
You are very welcome! I will always be 6'2" tall hanging out in my 80F weather here in Los Angeles a few miles from the beach but will always design, model, 3D Print, and laser engrave in mm. :)
@@BusterBeagle3D Spent the last two days getting familiar with the X Tool. looking back on your video thanks again. Funny I am 49 years old and learned both units of measurement. I myself will always be 6' 2" I don't know how warm 80f is but I know freezing is 32F, I Do enjoy 28C days here in Ontario 15 KLM from Lake Ontario. And when I go to the deli I will order half pound of Montreal smoke meat. My father hated the metric system, I got to know them both, and the only fraction my kids know is half then they argue who gets the bigger half... thanks again GO LEAFS GO!!!
The "super long" is exactly like it sounds like, There are extensions you can purchase which makes the machine double long. Also going above the maximum lines per cm for your machine wont really ruin the quality of the imagine that badly, it would act more like the settings for multiple passes and just make it look darker.
Wow! You have made this 69 year old fella very happy. A very, very good explanation of Laserbox, I have learned so much from your presentation. I have struggled for 3 years with my Co2 K40 laser and Inkscape to the point where I was about to give up. My K40 died on me and I bought the 10W D1. This is a hobby for me and if I make some pocket money along the way then that's cool. Thank you so much for taking the time to run through this software in an understandable yet concise presentation. Bob in the U.K. Subscribed 👍
Thanks Bob! Welcome to the channel. Just to be clear this is XTool Creative Space and not Laserbox Basic. I know they look the same but have slightly different features.
Great video How do you get a power speed test. Also tire a picture to a negative. In the case where you are burning a picture onto two layer painted tile
Thank you!!! I got mine two days ago and barely started using it today. I was having issues with cutting a circle with text in the middle. It was overlapping and couldn’t figure out how to unite them. I will try again tomorrow
Hello! Have you run into any problems with yours running a large burn on xcs with stopping and saying complete? Did it to me twice today. Thanks in advance.
I just got an xtool s1 pro. when framing it outlines an area completely different than the area i am marking. Any suggestions would be greatly appreciated
in my program its not letting me go to framing when i click start its telling me the element is placed out of processing area i dont know what to do. do you have any ideas what i need to do
I got the extended D1 Pro and have problems setting up the Absolute coordinate page. I got the machine set on extended, but when I place the picture in it (a 90mm x 80mm - X100, Y100) it tells me "element is placed out of processing area".
I was trying to do the cutting board in the projects section. I want to change the names and dates but I can't find a way to edit the project. Any tips?
Yes having problems with scoring and then cutting out a pattern after each other. it will do one or the other. PLEASE HELP for example : I bought a Santa Claus image, it has a score then a cut out on the same image. how can I make it work . sorry new to xtool. thank you John
I have the same issue. I have a piece (circular calendar) that uses score, engrave, and cut, and it is impossible to get the piece to do all three functions during one session. Furthermore, if I manage to get 2 of the three functions assigned when I go to the 3rd one, it all changes to whatever that might be, such as a cut or engrave. I think the problem is that it does not recognize layers. It sees the project as a one-layer image or something. Very frustrating. Any help would be appreciated.
Do you have a tutorial on making rubber stamps. Can't get the image to invert, so the image is present when you use stamp, When run program, the image itself is cut not the surrounding mzterial.
I created my own image of a pickleball in Creative space by making individual circle cuts. However, the laser is cutting out the perimeter circle first, instead of the smaller inner circles. How do get the laser to make the exterior cut last?
Sadly the presets are not as nice as they were with Laserbox. You used to pick basswood for example, then pick the thickness, 3mm, 5mm, etc. This app only has "3mm basswood".
You're a blessing brother may the Lord Jesus keep you and increase your wisdom 🙏. This tutorial gives me more confidence ro use xcs. I hope Xtool listen to your advice.....👍👍💯
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
Can you tell me as to what the setting on the interval setting, it should be to eliminate the horizontal lines showing up in the FILL portion of the burn
Hello. This is a pretty old version of the software so things have changed a bit since then. I am hoping to come out with and update to the video soon to go over some of the others things since then but I also no longer see that green dot anymore. You should still be able to choose the origin with the dots on the left.
This is getting to be a bit of an old video. So much has changed. I need to update it soon to go over some of those changes. The settings that you are seeing are based on the type of machine that you have and which version of the laser you are using. Sounds like you might be using the xTool F1 which does have dot duration and speed. You can see the recommended speeds by the company here: www.xtool.com/pages/material-settings
Great video but Im having trouble rounding the edges of the vector drawing. As soon as I close the shape it becomes a box (Like anytime you select an object and I cannot click on a vector point to soften or curve it. Any ideas what I am doing wrong?
Hello. You should be able to double click on the closed shape and see the dots that you made the shape with. Then in you doube click on the dots it should make it in to a soft corner that you can adjust.
Thank you so much! This is the second one I watched and you informed me of new things. I appreciate it. I have a question. I am new to this hobby and am trying to find out how to engrave and item then cut it using XCS with my D1 Pro 20W. While watching your video, I thought you were going to go over it when explaining the difference with score, engrave and cut. Is this possible to do? If so, do you have a video to do so? Thank you again.... This helped so much!
Thank you for the video! I am experiencing a weird with SVG files that I need a CUT, SCORE, and ENGRAVE at the same time. The success rate of project like that is so low that I have been wasting material like crazy. The issue was the engraving portion of the project seems to be shifting position but not the cut and score. And I think the problem started with the latest firmware update. Do you encounter the same issue?
Great video! When using XCS with my D1 Pro, it does not recognize the svg cut files I have saved on my laptop. Any tips on how I can solve that? Thanks much.
I know there was an issue with the older version of xcs. Try downloading the newer version and see if that fixes it. If it doesn’t I have had more luck importing DXF files so maybe you can convert them into that first and then open it.
@@BusterBeagle3D Thanks Buster. After I posted, I watched your video again, and tried again and got it to work. I was clicking on "open", when I should have clicked on "image". When I clicked on image and went to the same file folder as before, I could then see all the SVG files. Thanks much!!
HI I have just purchased the D1 Pro and it seems the screen is a different layout in that I can't find an option to unite items oe whatever they call it, I also feel it is very restrictive is designing things, do you have any pointers? Thanks in advance
Hi. The newest version of the software has changed around quite a few things. I have been waiting for the software to get out of it's BETA phase before updating any videos on how it works. It's still somewhat restrictive in what you can do. If you really want the most feature rich software that you can use with the machine I would recommend checking out Lightburn. I have a whole video going over how to work in Lightburn with the D1 on my channel.
Just got my xtool d1 pro and I have 2 issues. When trying to frame it only goes up an down when I try to go right or left manually with the arrows I hear a click but nothing happens. Any ideas on how to fix this?
I would check you belts and your stepper motors on your x axis to make sure nothing is catching or loose. Make sure the limit switches sensors are not caught on a wire or something. Otherwise I would either ask on the XTool Facebook group or send a support ticket to XTool directly. It’s not an issue I have seen personally.
Outline is only recognizing the outside of my images and its killing me. For instance, I have an 8, and use the magic wand to remove any outter coloring and the inside of the 8s, it is only outlining the outside shape, even at 0.0. Is there a setting I messed up somehow?
Thank you for this tutorial, I learned a lot! I do have a question if you have the time... I have purchased done SVGs for a layered project. All the layers load at once, but is there some way I can select just one layer so I can cut them one by one? Thanks so much!
You're welcome. I don't think there is a way to tell it just tell XSC to burn a layer. You can click on all of the other layers and turn off the OUTPUT switch right above the Power percentage and the others will not burn but that might be the closest way to achieve what you are looing for.
I am a new user of the laser engraving field. I watch your video and it was so nice and clear with the information on how to use the Creative Space. I have the Xtools D1 pro. But while watching the video I saw that in my software screen are not all the options and commands like the ones you have, for example the grid array and many other option like the ones you have at the top. Is there any way to get those with an update or doing some other setup? I fill a little stuck without not having this more options. Hope you can help me with this. Thank you
You actually have the new xTool Creative Space setup. They have recently upgraded to a BETA 2.0 version of the software and I haven't had a chance to fully dive into the new one since it is still in flux. The settings are still there but many of them have moved from the top to the right column.
Hello again--I am learning Creative Space more and more and am trying to cut out a vector image rather than engrave it but noticed that cutting is not an option. It is a black and white image just like your company logo in the video at 28 min. Do you know why engraving is the only option? Is there a way around that? Thanks for your help!
You have to convert that image into an outline to be able to cut it out. I first edit the image to remove the white areas and then use the outline button to create the outline. Then you can delete the original image and use that outline to cut.
Lightburn is the clear winner here. It's really such a much better program with more features. I would highly recommend it for anyone who is seriously going to be using your lasers a lot.
I have a project on creative space and when I try to print it with my D1, it does not do anything. It will let me frame sometimes and at other times it doesn"t do anything. I have tried to burn a project in laser box and it works fine. So it is just with Creative space that I am having problems. I have reloaded Creative space several time and did the software and firmware and still will not work. Help me please
Hello Bret. This might be a good question for the xTool Facebook Group. I'm not really sure what the issue might be when upgrading the original D1 to XCS. If you have a pro version I know there were issues if you used Laserbox Basic first instead of XCS but again I'm not sure. If there is a problem I'm sure it had shown up at some point in that group.
Hello, I am new to laser engraving/cutting. I have the D1 pro 10w and 40w. Can you please explain how I can engrave and then cut an object all at once? I would like to make several key chains at once. Thank you for your videos
I personally have only done color on stainless steel so I'm not sure. You might be able to get some colors on regular steel as well but as far as I know that's about it.
newbie here...my creative space keeps putting what i want cut into the bottom right corner of a huge box with empty space. its making it impossible to gauge how big the actual cut will be. anyone know why this is or how i can fix it?
Just make sure there is nothing in the top left corner of your workspace. When you go to start or process your job it will zoom out the the extent of all of the pieces you have. If you frame your job and the frame goes over a large area and not just where you expect to be cutting then there is something up there.
Thank you so much for the video. Just received my today and been very frustrated. I thought I broke the leaser because the tip got black but I then wiped it off. Do you have a tutorial on how to do the absolute coordinates?
Hello. Why can’t you currently engrave multiple pieces at once? You should check out the video on my channel about absolute coordinates. If you burn a grid on a spoil board you could align the parts where you want and burn many things at the same time and know exactly where they will all line up. ruclips.net/video/BjurBn4UGZg/видео.html
This laser will not reach 16 inches in both directions. It will side to side (X Axis 430mm) but not the up and down (Y Axis 390-400 depending on the laser power you buy)
I am new to laser engravers and watched dozens of videos to learn how to use my new D1 pro 10w. Your videos have been far more informative and useful than all of them. Thank you
Glad you found it helpful! Don't forget to check out the updated version as well here: ruclips.net/video/CoWIBSFjRWM/видео.html
I reverted to XCS after playing with Lightburn for 6 hours. Any software at my age is a challenge but I have to say your tuturial was both refreshing and constructive. I hope, like you stated the team at Xtool have watched and listened. Thank you Sir !
You are very welcome. Lightburn is a great program for sure so I would suggest maybe another look at it when you are more comfortable but XCS isn’t too bad either for a proprietary program.
This is OUTSTANDING…. As a new user of a recently acquired D1 Pro having an explanation for the various menu options is critical…. and you nailed it! I also watched your video on engraving on tapered cylinders and was able to have most of my questions answered. I’ve subscribed to your channel and look forward to continuing to acquire necessary knowledge to enjoy this new hobby.
Thank you and welcome to the channel!
For a electronically challenged person like me, this was awesome. This is the 3rd tutorial I've watched or tried to watch. The others went through them so fast like I was already familiar with everything. You really took the time to explain and I thank you. Will refer back to this often I'm sure 😊
Thanks! Glad it was helpful.
Thank you for editing in the zooms whoever edited this! Made it so much easier to follow along with for someone with bad vision who watches content on phones/tablets. My eyes aren’t straining. Seriously. Thanks. ❤
You are very welcome! I thought I may have been too heavy handed with it but I know when there is a lot going on in the screen it helps to zoom in a little bit at times.
@@BusterBeagle3D When it seemed important, you zoomed in just enough. You didnt over do it either. Nothing is perfect In editing. But this was a great job. The zooms don’t matter so much for desktop or tv watchers but for us mobile guys they are life savers.
SUPER helpful! There's a couple of really basic things I wish you had covered. Maybe they are in another video. 1) How does your laser know where you've placed the wood to be engraved??? 2) How to set the proper height for the laser head. a-on flat surfaces and b-not flat surfaces (i.e. a belt buckle, etc.). THANKS!!!😊
Half the challenge of any software is being aware of what it can do. This video is great at quickly touching many capabilities and will certainly be a go-to reference in the future on how to do things. Thanks so much for being so helpful without droning on in too many details that make one lose interest
You are very welcome. Thank you for watching!
The absolute best explanation of new software I have ever heard - great job!
Thank you! I appreciate it.
Thank you for this comprehensive video! I just bought the S1 and I am new to the whole laser world. I was looking into it a few years ago, but couldn't swallow the cost.
Glad it was helpful. There is a new updated video in the description of this one.
I can't thank you enough for this video! Your instruction was clear and concise. Well deserving of a sub!
Thanks for the sub!
Excellen tutorial! My D1 Pro is on the way in the post. After this tutorial I'm burning some wood in no time! Thanks Buster!
No problem, Good luck!
Well, finally info on XCS. I've got the D1 (not Pro) and as time has gone on, it worked fine with LightBurn. Then came the upgrades, and now LightBurn will not respond to the power settings. It burns very hot regardless of the settings. So, needless to say XCS is all I've got. It operates beautifully with Xtool's software, so the machine is not a issue. However, upgrades to firmware, etc....LightBurn just doesn't work. Xtool said on their site that sometimes LightBurn and the D1 WON"T work and it's an anomaly and they are not responsible. So, at any rate, I'm glad you have this video, it's very helpful and hope no one runs into this "anomaly" doesn't happen to them.
really awesome tutorial. Thanks for making this. I just got my d1 pro today and excited to unbox.
You are very welcome. The software has changed since but this should give you some of the basics.
It would be great if they had a centering button on the software which would bring the laser to absolute center as opposed to just the top left corner.
Great information! Makes this program so much easier to navigate as a beginner.
Great tutorial. Best I've watched of half a dozen. I'm using a 40W D1 Pro, and XCS has changed some since the beta -- though still no absolute coordinates button -- but it's still super useful. Thanks!
Thanks. I should probably do in update soon as a bunch has changed but the basics are still there.
This is the best tutorial video I've seen for Xtool. Many thanks for sharing. 👍👍🙏😊😊
Thank you!
You wonderful, wonderful man! Thank you so much for this! It has helped me no end.🙂🙂😊😊😊
Thank you! Glad you liked it!
Buster...........hello again....firstly, thank you so much for this tutorial, I love it. A couple of questions, if I may...........1. Why does the image look jagged (even on straight lines!) when I use the outline feature? 2. Why won't some images load into Creative Space? 3. Is there a way of saving an image, so that the entire image could be scaled, instead of the individual elements to it? Sorry to bombard you, but I would really appreciate your excellent insight into this. Thank you again, Sir!
Thank you for your help. I’m still learning this system
Glad to help
Supper Long is the Extension kit to make the xTool frame longer. In the new software version it is called Laser Extension Kit.
Thanks for the tutorial. Just assembled my D1 Pro and this really helps as a beginner. God Bless!
You’re welcome!
Saving this tutorial for reference for sure...thanks for well-explained lesson!
You're welcome!
Great video! I just purchased the d1 pro. This really helped me understand the software
No worries! Glad it helped!
thank you for you information. very helpful. not sure I understand the absolute X Y but I will watch again see if I can get my pea size brain to understand. thanks again
I'm sure you will get it. Essentially the whole machine has a coordinate system where the X goes left to right and the Y goes back to front. The (0,0) position of the system is at the HOME position in the back left corner. So if you wanted to burn at (x200, y200) that means the laser goes right 200mm (X position) and forward 200mm (Y position). That way if you had a grid burned onto a spoil board you would be able place something to engrave at that location and know exactly where the work is going to engrave. Hope the cleared it up a little bit and not just confused you more.
Thank You Soooo Much for your willingness to share and help others, your tutorial was very helpful!
No problem. Thanks for watching!
m
My XTool D1 Pro arrives tomorrow Thanks you for sharing your knowledge on this topic. Also nice to see our neighbors to the south embracing the metric system...lol
You are very welcome! I will always be 6'2" tall hanging out in my 80F weather here in Los Angeles a few miles from the beach but will always design, model, 3D Print, and laser engrave in mm. :)
@@BusterBeagle3D Spent the last two days getting familiar with the X Tool. looking back on your video thanks again. Funny I am 49 years old and learned both units of measurement. I myself will always be 6' 2" I don't know how warm 80f is but I know freezing is 32F, I Do enjoy 28C days here in Ontario 15 KLM from Lake Ontario. And when I go to the deli I will order half pound of Montreal smoke meat. My father hated the metric system, I got to know them both, and the only fraction my kids know is half then they argue who gets the bigger half... thanks again
GO LEAFS GO!!!
The "super long" is exactly like it sounds like, There are extensions you can purchase which makes the machine double long.
Also going above the maximum lines per cm for your machine wont really ruin the quality of the imagine that badly, it would act more like the settings for multiple passes and just make it look darker.
Wow! You have made this 69 year old fella very happy. A very, very good explanation of Laserbox, I have learned so much from your presentation. I have struggled for 3 years with my Co2 K40 laser and Inkscape to the point where I was about to give up. My K40 died on me and I bought the 10W D1. This is a hobby for me and if I make some pocket money along the way then that's cool. Thank you so much for taking the time to run through this software in an understandable yet concise presentation. Bob in the U.K. Subscribed 👍
Thanks Bob! Welcome to the channel. Just to be clear this is XTool Creative Space and not Laserbox Basic. I know they look the same but have slightly different features.
Thank you for this great video and tutorial you really thought me hoe to use the software. ❤ i am totally new to this
You’re welcome 😊
A HUGE thank you for your time and explanation!
Thank you so much, very easy to understand, excellent tutorial!
Merci pour ce tutoriel qui m’a beaucoup aidé, même en traduction automatique tout est compréhensible.
Glad it was helpful!
This was an awesome video! You answered so many of my questions! Thank you!
You are very welcome. Glad it was helpful!
Great video
How do you get a power speed test. Also tire a picture to a negative. In the case where you are burning a picture onto two layer painted tile
Thank you!!! I got mine two days ago and barely started using it today. I was having issues with cutting a circle with text in the middle. It was overlapping and couldn’t figure out how to unite them. I will try again tomorrow
This is an excellent tutorial. Thanks for posting this!
Glad you enjoyed it!
Thank you very much for the Tutorial. This helps me out very much.
You are very welcome!
This helped a lot, thank you.
Thank you for the video 🎉 It was great!!!! * now I understand the program better*
Excellent! Happy to help.
Great Video and Excellent teaching skills! I absorbed every bit of it. Thank you! Subbed right away too! Looking forward to more videos
Thank you!
Hello! Have you run into any problems with yours running a large burn on xcs with stopping and saying complete? Did it to me twice today. Thanks in advance.
I just got an xtool s1 pro. when framing it outlines an area completely different than the area i am marking. Any suggestions would be greatly appreciated
Thank you for this helpful video!
No worries!
Great tutorial.... setting my machine up now
No worries. Glad it's helpful.
Great and so easy to understand. THANK YOU!
You are very welcome. Thank you!
in my program its not letting me go to framing when i click start its telling me the element is placed out of processing area i dont know what to do. do you have any ideas what i need to do
I noticed that the program on my screen does not show any material list as once before, any reason for this? Thanks
I got the extended D1 Pro and have problems setting up the Absolute coordinate page. I got the machine set on extended, but when I place the picture in it (a 90mm x 80mm - X100, Y100) it tells me "element is placed out of processing area".
I was trying to do the cutting board in the projects section. I want to change the names and dates but I can't find a way to edit the project. Any tips?
Yes having problems with scoring and then cutting out a pattern after each other. it will do one or the other. PLEASE HELP for example : I bought a Santa Claus image, it has a score then a cut out on the same image. how can I make it work . sorry new to xtool. thank you John
I have the same issue. I have a piece (circular calendar) that uses score, engrave, and cut, and it is impossible to get the piece to do all three functions during one session. Furthermore, if I manage to get 2 of the three functions assigned when I go to the 3rd one, it all changes to whatever that might be, such as a cut or engrave. I think the problem is that it does not recognize layers. It sees the project as a one-layer image or something. Very frustrating. Any help would be appreciated.
I just got the Xtool D1, not the pro, my laser keeps on drifting to the right, got any advice on that? I'm using creative space and new at this.
Do you have a tutorial on making rubber stamps. Can't get the image to invert, so the image is present when you use stamp, When run program, the image itself is cut not the surrounding mzterial.
Is there a way to make reference lines or text? ... like add text and lines that aide in making a cut template, but do not actually get cut?
The "Super Long" has been changed. In my current one it says "Laser Extension Kit"
I created my own image of a pickleball in Creative space by making individual circle cuts. However, the laser is cutting out the perimeter circle first, instead of the smaller inner circles. How do get the laser to make the exterior cut last?
Great video. Really appreciate it.
Sadly the presets are not as nice as they were with Laserbox. You used to pick basswood for example, then pick the thickness, 3mm, 5mm, etc. This app only has "3mm basswood".
Excelente explicación! Muchas gracias😄
hi I am trying to engrave on stainless steel but the machine just go over the tag how can I set up I got xtool d1 w20
You're a blessing brother may the Lord Jesus keep you and increase your wisdom 🙏. This tutorial gives me more confidence ro use xcs. I hope Xtool listen to your advice.....👍👍💯
Just wondering if I can use lightburn and creative space on the same xtool d1 pro?
Hello. Yea both can be used with the machine.
Hi thank you so much for responding do I have to download creative space first or can I just put light burn on it alone
Can you cut out an image after engraving like your dog image engrave the dog then cut out the circle in the program or would that take 2 setups?
Can we connnect a camera and to be recognized by the software to simplify our working area?
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
Do you know how to rotate the work area in XCS. I have the extenders and the bed runs length wise? I can rotate the work, but not the work area.
Can you tell me as to what the setting on the interval setting, it should be to eliminate the horizontal lines showing up in the FILL portion of the burn
I just bought d1 pro 20W a week ago. Thank you for sharing info on Creative Space.
How did you save your logo as image file?
hello! it looks like the green dot (28:30) isn't showing anymore, do you know where I can check the settings to make it appear again?
Hello. This is a pretty old version of the software so things have changed a bit since then. I am hoping to come out with and update to the video soon to go over some of the others things since then but I also no longer see that green dot anymore. You should still be able to choose the origin with the dots on the left.
Hi. Can I hand write in creative space to clean up a recipe to burn I deleted the lines and need to fix the handwriting
How do I extend the working parameters after adding the extensions on the D1 using creative space? Any help would be great
Right under the laser in the top right corner of XSC change the Laser Flat to Laser Extension Kit.
FYI The "laser super long" is for extensions to double the length of the work area. But you probably already know that.
Great video. Thank you 🤗
You're welcome!
Can you explain how to engrave an image and them have it cutout the outline after it engrave all in one setup?
When I import an image it only gives me options for power and DOT not for speed am I overlooking something? Thanks in advance !
This is getting to be a bit of an old video. So much has changed. I need to update it soon to go over some of those changes. The settings that you are seeing are based on the type of machine that you have and which version of the laser you are using. Sounds like you might be using the xTool F1 which does have dot duration and speed. You can see the recommended speeds by the company here: www.xtool.com/pages/material-settings
Thank you for the information!
You bet!
Great video but Im having trouble rounding the edges of the vector drawing. As soon as I close the shape it becomes a box (Like anytime you select an object and I cannot click on a vector point to soften or curve it. Any ideas what I am doing wrong?
Hello. You should be able to double click on the closed shape and see the dots that you made the shape with. Then in you doube click on the dots it should make it in to a soft corner that you can adjust.
Thank you so much! This is the second one I watched and you informed me of new things. I appreciate it. I have a question. I am new to this hobby and am trying to find out how to engrave and item then cut it using XCS with my D1 Pro 20W. While watching your video, I thought you were going to go over it when explaining the difference with score, engrave and cut. Is this possible to do? If so, do you have a video to do so? Thank you again.... This helped so much!
Thank you for the video! I am experiencing a weird with SVG files that I need a CUT, SCORE, and ENGRAVE at the same time. The success rate of project like that is so low that I have been wasting material like crazy. The issue was the engraving portion of the project seems to be shifting position but not the cut and score. And I think the problem started with the latest firmware update. Do you encounter the same issue?
Great video! When using XCS with my D1 Pro, it does not recognize the svg cut files I have saved on my laptop. Any tips on how I can solve that? Thanks much.
I know there was an issue with the older version of xcs. Try downloading the newer version and see if that fixes it. If it doesn’t I have had more luck importing DXF files so maybe you can convert them into that first and then open it.
@@BusterBeagle3D Thanks Buster. After I posted, I watched your video again, and tried again and got it to work. I was clicking on "open", when I should have clicked on "image". When I clicked on image and went to the same file folder as before, I could then see all the SVG files. Thanks much!!
HI I have just purchased the D1 Pro and it seems the screen is a different layout in that I can't find an option to unite items oe whatever they call it, I also feel it is very restrictive is designing things, do you have any pointers? Thanks in advance
Hi. The newest version of the software has changed around quite a few things. I have been waiting for the software to get out of it's BETA phase before updating any videos on how it works. It's still somewhat restrictive in what you can do. If you really want the most feature rich software that you can use with the machine I would recommend checking out Lightburn. I have a whole video going over how to work in Lightburn with the D1 on my channel.
Just got my xtool d1 pro and I have 2 issues. When trying to frame it only goes up an down when I try to go right or left manually with the arrows I hear a click but nothing happens. Any ideas on how to fix this?
I would check you belts and your stepper motors on your x axis to make sure nothing is catching or loose. Make sure the limit switches sensors are not caught on a wire or something. Otherwise I would either ask on the XTool Facebook group or send a support ticket to XTool directly. It’s not an issue I have seen personally.
Can I get step by step for cutting? I’m new to d1 pro
Have you’ve done Xtool app tutorial? Is it the same as using a computer?
Outline is only recognizing the outside of my images and its killing me. For instance, I have an 8, and use the magic wand to remove any outter coloring and the inside of the 8s, it is only outlining the outside shape, even at 0.0. Is there a setting I messed up somehow?
Nope. You are not missing anything. There is a bug in the software, hope it's fixed in the next version.
Thank you for this tutorial, I learned a lot! I do have a question if you have the time... I have purchased done SVGs for a layered project. All the layers load at once, but is there some way I can select just one layer so I can cut them one by one? Thanks so much!
You're welcome. I don't think there is a way to tell it just tell XSC to burn a layer. You can click on all of the other layers and turn off the OUTPUT switch right above the Power percentage and the others will not burn but that might be the closest way to achieve what you are looing for.
I am a new user of the laser engraving field. I watch your video and it was so nice and clear with the information on how to use the Creative Space. I have the Xtools D1 pro. But while watching the video I saw that in my software screen are not all the options and commands like the ones you have, for example the grid array and many other option like the ones you have at the top. Is there any way to get those with an update or doing some other setup? I fill a little stuck without not having this more options. Hope you can help me with this. Thank you
You actually have the new xTool Creative Space setup. They have recently upgraded to a BETA 2.0 version of the software and I haven't had a chance to fully dive into the new one since it is still in flux. The settings are still there but many of them have moved from the top to the right column.
Hello again--I am learning Creative Space more and more and am trying to cut out a vector image rather than engrave it but noticed that cutting is not an option. It is a black and white image just like your company logo in the video at 28 min. Do you know why engraving is the only option? Is there a way around that? Thanks for your help!
You have to convert that image into an outline to be able to cut it out. I first edit the image to remove the white areas and then use the outline button to create the outline. Then you can delete the original image and use that outline to cut.
Excellent your explanatory video. How do you compare xTool Creative Space with LightBurn?
Lightburn is the clear winner here. It's really such a much better program with more features. I would highly recommend it for anyone who is seriously going to be using your lasers a lot.
Thanks dude! Fantastic tutorial! Subscribing! :D
I have a project on creative space and when I try to print it with my D1, it does not do anything. It will let me frame sometimes and at other times it doesn"t do anything. I have tried to burn a project in laser box and it works fine. So it is just with Creative space that I am having problems. I have reloaded Creative space several time and did the software and firmware and still will not work. Help me please
Hello Bret. This might be a good question for the xTool Facebook Group. I'm not really sure what the issue might be when upgrading the original D1 to XCS. If you have a pro version I know there were issues if you used Laserbox Basic first instead of XCS but again I'm not sure. If there is a problem I'm sure it had shown up at some point in that group.
@@BusterBeagle3D Yes I have seen a few entries about people having the same issue. No answers to correct it though and X tool doesnt respond
Hello, I am new to laser engraving/cutting. I have the D1 pro 10w and 40w. Can you please explain how I can engrave and then cut an object all at once? I would like to make several key chains at once. Thank you for your videos
I personally have only done color on stainless steel so I'm not sure. You might be able to get some colors on regular steel as well but as far as I know that's about it.
Can be the Xtool D1 controlled by other software, like LaserGRBL, LaserWeb or RDWorks?
thank you!
Only other software that can control it is Lightburn.
Is there a way to engrave something and once it is done to cut it out?
Why are the vector points on mine so huge? I can’t even where I’m putting the next one.
newbie here...my creative space keeps putting what i want cut into the bottom right corner of a huge box with empty space. its making it impossible to gauge how big the actual cut will be. anyone know why this is or how i can fix it?
Just make sure there is nothing in the top left corner of your workspace. When you go to start or process your job it will zoom out the the extent of all of the pieces you have. If you frame your job and the frame goes over a large area and not just where you expect to be cutting then there is something up there.
Thank you so much for the video. Just received my today and been very frustrated. I thought I broke the leaser because the tip got black but I then wiped it off. Do you have a tutorial on how to do the absolute coordinates?
Hello. You can check out this video. ruclips.net/video/BjurBn4UGZg/видео.html
I love using my XTool D1 and want to engrave multiple pieces at once instead of one at a time. Do you have or know of a video covering this?
Hello. Why can’t you currently engrave multiple pieces at once? You should check out the video on my channel about absolute coordinates. If you burn a grid on a spoil board you could align the parts where you want and burn many things at the same time and know exactly where they will all line up. ruclips.net/video/BjurBn4UGZg/видео.html
Thank you! What a great explanation. Can pictures, photographs be imported?
Yes, absolutely
@@BusterBeagle3D thanks!
I'm looking to buy a laser and engrave mountains on a lazy Susan. Can this laser fit on a 2" piece of wood that is 16"?
This laser will not reach 16 inches in both directions. It will side to side (X Axis 430mm) but not the up and down (Y Axis 390-400 depending on the laser power you buy)
Thank you so much!