Tumble dryer not turning how to replace belt Bosch Neff Siemens helps fit capacitor element fan etc
HTML-код
- Опубликовано: 1 авг 2024
- There is no easy way to change the belt on these tumble dryers but if you do everything, I say in the video you will save yourself an astounding amount of money each year,
This video will help you replace all these parts: belt, capacitor, heating element, pully wheels motor and fan blades, etc. Visit our shop for hundreds of tumble dryer parts b.link/v3n5wpwk
Bosch has built such a good dryer that they have been using this cabinet design for the last 20-years. by doing the service and Maintenance you could be saving in excess of £70 which will pay for the belt and leave you a lot towards other household bills. You need to do all the procedures correctly to make sure that it all lines up especially with the cabinet parts the belt change, servicing, and Maintenance, will only take you an hour or so. this video can be used on all these makes made by the Bosch group Balay, Bosch, Constructa, Cylinda, Gaggenau, Kleenmaid, Koenic, Lynx, Neff, Novamatic, Pitsos, Profilo, Siemens, Viva,
Questions people ask, how tight should a tumble dryer belt be. The spring system tensions of the belt over the jockey wheel
Here is the video on the condensing unit and pump system
• Tumble dryer not start...
Here are some useful videos on these Bosch tumble dryer
▶ Pcb Repair • Tumble dryer no power ...
▶ NTC Senors ruclips.net/user/How-2-repai...
Please remember to subscribe to our channel and click on the bell notification to get reminders
ruclips.net/user/Apart4u?...
Remember to Shop with us and it would help us, by posting this video or the website on your
timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us as your favourite’s also I would be grateful if you would subscribe to our channel's
🛒 Website for all your Parts Tutorials and FAQ’s
www.how-to-repair.com
social media as this really helps my site and keeps us going.
#replace #tumble_dryer #belt
Timestamp on the work done on this Bosch made tumble dryer
00:00 Explaining the faults.
01:44 Diagnosing the faults.
02:26 Dismantling the tumble dryer.
06:25 Removing Heater and electrics from electrical filter suppressor.
11:22 Removing fan cover and support wheel.
12:05 Cleaning and maintenance.
13:10 How the tumble dryer fan system works with moisture sensor.
15:05 The correct way to fit the belt around the motor pulley wheel.
18:05 Tumble dryer not turning capacitor fault.
19:35 Belt alignment.
23:46 Fitting tumble dryer heating element.
25:40 Tensioning tumble dryer belt with motor spring.
27:44 Testing tumble dryer.
28:38 Support our website Bosch Neff Siemens tumble dryer spare parts. 
Хобби
Thanks
Thank you very much for supporting the site. Your donation is much appreciated and I'm glad I helped you fix your dryer. Wrinkly hands fix appliances, not algorithms! My videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @bjmcguir please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
So satisfying to not only have our dryer working again but also knowing it is now completely clean again on the inside. Great video
I am very happy to read your comment. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.
I'm also employing new blood now to assist me in my workload. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Thanks for the great content. I don’t know how I would have completed the repair without your help. Great that so many content creators spend the time to publish. I’ve bought you a well deserved beer.
Thanks for the video. Your method is much better than the people suggesting that it should be done from the front.
Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Thank you so much! Clear, step by step instructions. Exactly what we needed. We've replaced the belt on our Bosch tumble dryer, no problems at all. Total cost £12.59!
Very helpful video. Helped me fix my dryer!thank you!
Thank you for this video. Greetings from Spain.
Thank you. A really thorough and well made video that shows the right way to change the driver belt without messing about with the front! 👍
Good video, I wish I had all time and space like you for every repair, in the field it's not as easy ;)
glad you liked it. I did my 30 years national service, cooped up in a van working in a pokey kitchens that were covered in grease and all sorts of horrors, and to top it off you get an ungrateful customers that bounces a cheque. thats why i came in to the workshop . I would not want to be on the road today with the traffic and aggressive people
@@How-to-repair yep i work for bosch,and there are lots of kitchens that are infested with mice, and annoying customers who like to breath down your neck
Thank you very much for such content. I can learn a lot from you. I myself work in the Electrolux service. I often watch your lessons.
Such a good video. Thank you so much for spending the time to create it. I've just replaced the belt and heating element and wouldn't dare attempt it without your guidance.
Thank you for this great video. I would not have dared change our dryer’s belt without it.
Glad it helped! Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Excellent. Couldn't have changed the belt on our Siemens WT45N200GB without your carefully chaptered video. It is such a waste to change a machine ( tempted by sale prices or promises of greater efficiency ) when only the belt has failed. Thanks so much!
You're welcome! Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Perfect video with clear instructions! 👍 Greetings from Sweden.
Brilliant video, successfully changed the belt on a Bosch classixx 7 with your guidance. Thanks for sharing
You will find this one of the last good Bosch machines. I'm glad we were able to assist you. Please remember to subscribe to the channel @davidbates5310 this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
So greatful finding this video as I've just saved one from the scrap heap that from a first inspection it only needs a belt. Thanks
Unreal tutorial! 10/10
Just want to say a massive thank you, managed to change the belt on our Bosch that was just out of warranty. Took a whole afternoon, and many times referring back to your video. But replaced and seems to be working well, in fact better than previously. Could not have done this without you
Many thanks for the helpful video on this one. With the side off and before consulting RUclips, I had a feeling fitting from the rear was the intended way it should be done! It is certainly the best way as it is nice giving it a good clean out! Just finished changing our Bosch belt - 11 years out of the old one, although i suspect it may have been a heavy load like you mentioned that started it going! At first we had a bumping noise and then nothing 😃 Anyway, all good now thanks to your video! Thanks again!
Great video, thanks so much for the effort. Amazing how much fluff builds up in these.
Our pleasure! @oldman1944 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Absolutely fantastic, thank you very much!!!
Thank you very much!
Great right video. Helped a lot.
Thank your for your comment and glad it helped. All I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
I will continue to invest the beer donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.
I'm also employing new blood now to assist me in my workload really appreciate you supporting the website. You can support us by donating to our website www.how-to-repair.com/help/buy-paul-a-beer/
Great video. Very clear and detailed instructions. Changed the belt on our tumble dryer and all working again! Needed to refer to the video a few times during the rebuild! Thanks.
Glad it helped Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Thank You very much!!! Very clear instructions.
You are welcome! I'm glad I could help you @jskrzyp please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Great video m, thanks so much!
Brilliant video, huge thank you. Save me hundreds and bonus points from the boss go a long way :D
Great job, it's clean like new. A also love your workshop. I always now, how aggressive people can get, also on traffic, that going bigger and bigger.
Thanks 👍 iam glad you like the workshop I am trying to make the video proses easier so I can make more videos. people don’t realize this video took two days some take longer, repairing editing overlays, title description then I have to make the webpage
Life saver. Thank you.
Excellent video, got me out of trouble following other (wildly inaccurate!) videos. I managed to do it without removing the power lead and the jockey wheel though. The plastic vent on the front (lower right) has to be nearly broken off though! I had a few screws leftover as well....
This is awesome!!
Αn impeccable professional, with emphasis on detail.
Is there any difference for a heat pump tumble dryer and how much does this job charge?


Thank you so much ❤
Incredibly detailed/thorough. Thanks very much
Thankyou For leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thank you for this - a very nice, detailed video that's clear to understand and follow.
I'd spend a long time following another video that suggests replacing the belt from the front, which appears impossible on this specific model.
Now going to re-assemble the front panels and try following this one from the back!
#WTE84015GB/31
You're very welcome! @Wolfsbane2k please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
No problem! Thought I'd confirm that having now put the entire thing back to together again, and then stripped from the back, it was actually a relatively easy task... but like others, wish I'd had the workshop to do it in rather than a dark and cramped utility room.
Still, it's now purring away again - and after cleaning the 11 years of dust build up on the back (yuck), working much faster too.. thank you!
Very, very good. Thank you.
Super video - thanks very much. Was easy to follow and helped me have the confidence to change the belt on my classix 7.
Glad it helped you, and thank you for subscribing to the channel
Great demonstration, it frustrates me sometimes these manufacturers make it awkward for the engineer in terms of having to remove the drum just enable a belt to be fitted,however thanks again I’ll look forward to many more videos,like myself engineer of 20 years I’m still learning new techniques 👍
Have a beer on me 👍
thanks for the beer mate. i show the video in the right way for genral public but if in a rush you can just loosen back panel, slide drum shaft out and slide belt in. but the maintenance is more important than the belt.
I totally agree when you have 10 jobs a day you have to find ways of saving yourself time out there.
Very clear and easy to learn video. Thank you.
Glad it was helpful! please remember to subscribe as that's is was keeps this channel going. Thanks 👍
@@How-to-repair dont worry about that!
Hi there. Just wanted to say thank you for your wonderful instructional videos. My sister recently had issues with both her Bosch washing machine and clothes dryer. Here in Melbourne, Australia, a repair technician quoted her well over 500 pounds (AU$1000 +) to repair both. Labour was almost 400 pounds! With your videos, I was able to repair both for less than 50 pounds in about an hour. All that was required in the end was a new gasket seal for the washing machine and cleaning up of the rear blower fan on the dryer. Would you believe the technician 'diagnosed' the dryer issue without even popping the lid? He said it was a belt and bearing problem! If my sister had allowed him to take it away to the shop to be repaired, I have no doubt he would have claimed to have replaced both parts and charged her accordingly. Once again, thanks for the great videos! Trade standards have sunk to new depths here in Australia. I could probably give school teaching away and become an appliance 'technician'.
While removing the black hose from water container housing the plastic tip of the housing broke off.
Is there a workaround?
If not, what is the official name of the housing for water container... Or the part number please?
Fantastic video!
you could try putting a piece of insert pipe in between the plastic then glue
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
buon video come sempre grazie
Good video
I prefer replacing new belts , it saves the hassle of doing the repair again and from my understanding theses belts have a life span
Very clear and helpful video. Thank you! I’ve noticed that the dryer is making the room more humid since the seal around the back plate was broken. Which heatproof sealant product would you recommend to fix this? Cheers.
the problem being is if you use heat proof glue then it will need to come apart in the future. try using heat foam tape. Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Well done on a fantastic tutorial on changing a belt. You make it look so easy. Thanks. What would you suggest for the best tumble dryer to purchase please?
stick to vented or a normal condensor heat pump are just not reliable enough Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Hi thanks for the video help a lot. But I have a cuestión my dryer Bosch I set up the panel knob on heavy duty that is 2:25 and the dryer stop and finish cicle . I appreciate your help thanks
I have to reset panel then happens again is like the time in the dryer panel is no working thanks for your help
thanks for the video. I used your instructions to fix Electrolux 😊. Now i need to replace belt for Siemens iq300 with heat pump. Does this video suitable for it? Thanks in advance!
Your video’s are amazing. Recently my dryer stopped working and when it stopped It smelt like burning plastic/rubber. In watching your videos I was able to determine that my belt broke. Sure enough that was part of the issue. I have replaced the belt and it still is just clicking. I tried to spin the drum to determine if it was the capacitor and it still didn’t work. It just clicks and blinks. I have a Bosch dryer WTV76100US/08. It looks almost like the Bosch Neff minus the water holder. Could it be the capacitor or is it something else like a fried circuit board or motor. Any advice would be great. Please keep making the videos.
My AEG is not turning the rubber broken, do you have a video how to change it please?
Hi , great video , on a wte84301 is it possible to remove the air intake grill without damaging the grill or the panel , the clips all seem mega tight . Also with the side panel off can the drum support wheel be removed without removing the drum to enable the air blade cover to be removed .
Great video as usual, the main man 🏅👍
very hard for me to answer this without actually seeing I don't want to give you false information thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Hi , it is the same layout as the machine featured in this video, you say the clips for the air intake fan cover are awkward to release, but if the clips are released can the cover be removed without removing the drum, can the drum support wheel be removed and then the air intake fan cover be removed easier. Or just for cleaning purposes can the white air intake grill on the front of the machine be removed without damaging the front of the panel or the grill .
Thanks
Hi your edited video was just under 30 minutes but how long approximately would you say this repair might take.
for me 30 min but none enginers under an hour just organise everthing Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I would like to buy a shaft kit and the front felt pads which can fix the my Ariston Tvf75c6h1 Series no 604140154. Can you please advise which set to order.Thank you very much!
When you need parts please use the website
We will gladly assist you. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Hey, thanks for the video, very informative. I'm having a problem fitting the belt - it's the same size as the old one that broke, but when trying to fit it around the drum and motor, it's too loose, and the drum doesn't turn. Do you have any ideas what we might be doing wrong? Thanks
For anyone else having this problem, you need to put the belt over the other side of the idler wheel above the motor. The guy shows you a close up of how it should be set in the video.
Hi, hope you are well. Will this procedure works for a Bosch WTW863S 1GB/24?
Kindest regards
It should be very similar @user-ts7dh1rv8r please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repair May I ask where is your shop/workshop located?
Muchas gracias, grande maestro!!!!😮
Hola muchas gracias por tu comentario y me alegro que te haya servido de ayuda. Por favor, recuerda suscribirte a nuestro canal, ya que eso nos ayuda mucho 😇
Como trabajamos muy duro en nuestro almacén haciendo videoguías gratuitas para todos vosotros sobre electrodomésticos, siempre agradecemos una cerveza, ofreciendo la opción de cerveza simple o redonda. www.how-to-repair.com/help/buy-paul-a-beer/
Gracias, Paul 👍
Thanks