Whats not to like, the sign of a TRUE mechanic is how they improvise with what they have at the time. You dislike people probably don’t even know what end of a screwdiver to use!
Honestly the chicago eletric from harbor frieight isnt bad! the mig welder wire feed my buddy has he runs beads for hours straight! we went thru 2 spools in one night practicing and never over heated/tripped. its a 110 outlet so easy to hook up and use ad great for leanring! oh and a hundred twenty bucks. You can do it man. Just get one. Youl love it :)
A pto shaft from the motor gear system would make that a harvester and reaper if you had an adaption for a trike seat on a wooden iron rod reinforced wagon. You could chop that weld and just add a trike adaption wheel system and it would be a very useful piece of farm equipment. Thought it was what the Germans would say as fucking brilliant. ;)
Hello :) with that setup it was around 25kmh, after some time i did pulley swap, i made 1:1 gera ratio and with at 3800rpm top speed was around 45-50kmh 😅
... молодец парень, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения!-, если сохранились размеры твоего трактора, скинь пожалуйста ссылку, хочу себе такой-же сделать, очень он мне понравился!!!
Sweet great video brother I did not see reverse if you put a second pulley With the belt drive and twist it on 180ﾟ you have reverse as well You're welcome
Колеса на прицеп побольше поставить и двигатель выровнится по горизонту. А с таким наклоном долго ездить нельзя из-за масленного голодания в двишке или переизбытка.
Hola me encanta tu invento.tengo un motor honda y voy a fabricar algo parecito para acarrear todo en el campo claro cuando se caiga el maldito comunismo en cuba me llevo el motor honda y hago un motocultor.o es mejor comprarlo de fabrica yo creo que es mejor y dejar. El motor estacionario para una turbina.pero gracias me gusta tu invento creo que es magnifico gracias por subir tan buen video.
@@mrimbusyt cool! I have the cheaper "crappy" transformer based Parkside welder that struggles to melt 2.5mm electrodes and constantly overheats.....though it only cost 50€ so 🤷
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Whats not to like, the sign of a TRUE mechanic is how they improvise with what they have at the time. You dislike people probably don’t even know what end of a screwdiver to use!
This is truly awesome. Curretly using a tiller motor for a gokart and parts off a 200 cc bike.
Engineers,...
Absolutely crazy and very admirable.
*This is pretty bad ass. I need to get myself a welding machine.*
Honestly the chicago eletric from harbor frieight isnt bad! the mig welder wire feed my buddy has he runs beads for hours straight! we went thru 2 spools in one night practicing and never over heated/tripped. its a 110 outlet so easy to hook up and use ad great for leanring! oh and a hundred twenty bucks. You can do it man. Just get one. Youl love it :)
@@waynegretzky8464 *Does the harbor freight welder weld aluminum or magnesium? Thanks for your response.*
@@bigtexas7580 Yes.
@@waynegretzky8464 *Cool, thanks. I'm going to pick up one today.*
@@bigtexas7580 Hell yea brutha! Enjoy being able to do anything now! And your friends will have all sorts of work for you ; )
We also have those converted Kubota tiller in our country, we call them kulig-lig. Farmers convert them to transport their produce and people.
SUPER > GOOD WORK!! Good welding!
Svaka cast... Mister Imbus DoktorD.S. i Mladen 365 3 HR inovatora koja vrijedi pratit...Imate veliki potencijal... 👍👍👍
Hvala puno 👍😀
I really like this, collect junked parts, rebuild into something useful. Well done.
Thnak you!
you are blessed that was good technician
Ottimo ATTREZZO
👍👍👍👍
Ottimo Lavoro 👍👍👍
Very nice project!! The only problem is missing a reverse gear.
And the brakes...
Nice good video frend sharing
Good job!! I could never! 😅
Did u put belt on chain centrifugal clutch?
nice work, new friend is here...
Genijalna ideja za mjenjač od APN-a
Hvala! :)
Excellent build, works great. Greetings from Australia
Thank you 😀❤️
Apenac sluzi svrsi 😁 Odlicno napravljeno 💪
looks good man! just am i missing something. wheres the cultivator part?
Nice project my friend😀😍
From what motorcycle is that gearbox?
Perfect!!! Amazing!!! Odlično Matej!!! Pozdrav iz tvoje osnovne škole!!!
Hvala Puno!
A pto shaft from the motor gear system would make that a harvester and reaper if you had an adaption for a trike seat on a wooden iron rod reinforced wagon. You could chop that weld and just add a trike adaption wheel system and it would be a very useful piece of farm equipment. Thought it was what the Germans would say as fucking brilliant. ;)
Realy Amazing work man ,:-)
Im excited to know its top speed on fourth gear
Hello :) with that setup it was around 25kmh, after some time i did pulley swap, i made 1:1 gera ratio and with at 3800rpm top speed was around 45-50kmh 😅
@@mrimbusyt thats impressive for a heavy load carrier.
Супер аппарат !!! Молодцы !!!
Me gusto mucho el vídeo
Gracias
Bună treaba! 👍👍👍
As duas pontas são travadas?
Excellent build, only miss is that I wpoud need a reverse gear, which one easyly can make with an extra belt and a couple of drive wheels
Amo seu conteúdo parabéns
Da li se secas kad si pravio osovinu koje su unutrasnje mere cevi jer vidim da jedna ulazi u drugu? Pozz
I like what you doing bro keep going
Impressive 😊
Very nice, good use of recycled materials, good basic design, nice...
👍
Very good 👍👍👍💪
Good job
Salam sukses bersama
👍👍👍👍👍
My only concern would be the oil slinger not getting enough lube to the piston.
what piston?
Hi, from Argentina... I made one similar to yours, but it's hard for me to fold... any advice?
Muito bom meu amigo parabéns.
Eu também gosto de invenções caseira
... молодец парень, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения!-, если сохранились размеры твоего трактора, скинь пожалуйста ссылку, хочу себе такой-же сделать, очень он мне понравился!!!
Brakes?
Very cool ! Is it hard to steer when you’re cruising on it?
Sweet great video brother I did not see reverse if you put a second pulley With the belt drive and twist it on 180ﾟ you have reverse as well You're welcome
Nice video, keep it up, thanks :)
Those welds look damn good, 6011 rod or the Russian equivalant?
👍👍👍👍❤️❤️❤️❤️🇮🇩
Parabéns muito bom o microtrator
Super🔥👍
Wooooooowww🤩🤩 very nice.
Колеса на прицеп побольше поставить и двигатель выровнится по горизонту. А с таким наклоном долго ездить нельзя из-за масленного голодания в двишке или переизбытка.
Super
Mantap 👍
Salut de la ce este acel reductor sau cutie de viteză
Four speed. Nice
Cool 🤟👍🤘
Good, but no reverse?
He can just twist the belt
have you tried making a dozer or some heavy machines?
good one
Wow! That’s great!😃
Hi, can I know, what's the name of the device you're wearing, which works like a clutch. very pleased with the results of your content. tq.
It is a Tomos engine from moped
Hola me encanta tu invento.tengo un motor honda y voy a fabricar algo parecito para acarrear todo en el campo claro cuando se caiga el maldito comunismo en cuba me llevo el motor honda y hago un motocultor.o es mejor comprarlo de fabrica yo creo que es mejor y dejar. El motor estacionario para una turbina.pero gracias me gusta tu invento creo que es magnifico gracias por subir tan buen video.
I used to be good at welding but that was probably 32-33 years ago
Nice
Excellent
Request, A cutivator from a lawn mower,
From what is gearbox?
how do you break?
Gostei amigo só falta meu
Qual é a dimensão do eixo, comprimento e diâmetro?
😮😮😂
This is honda engine? or Chinese counterpart?
Its chinese one 😀
Sei GRANDE
Esa caja que le pusistes es de moto
Pls what type of gearbox is that...
Its from old 2 stroke moped Tomos TLS 14 with 4 speeds
Muito bom👍
*Best RUclips videos* :)
*What welder are you using?*
Im using parkside 120a mini inverter from Lidl 😀
@@mrimbusyt cool! I have the cheaper "crappy" transformer based Parkside welder that struggles to melt 2.5mm electrodes and constantly overheats.....though it only cost 50€ so 🤷
@@mrimbusyt How much did it cost?
From my research inverter welders are much more powerful than AC buzz boxes/ transformers!
Exelente
Any new videos coming up?
Very Good.
This is good
I like it.
Impecable los felisito porque no me asen uno por favor
Excelente
Класс 👍
snazzy socks.................
Bacana muito bom
Busco una trilladora chica para cocechar trigo
Hallo sir 👍
Nota ďez!
Jesi ti naš sa balkana
To se i ja pitam. Sigurno je sa balkana cim je koristio motor od Tomosa
Je
Возьму на заметку
nice!
با مخالفت شدید اعضای خانواده (همسر و فرزندانم و... ) آرزوی داشتن تراکتور را به گور خواهم برد
NO BRAKES. NO GOOD.
Wooooooooow
Can you make one for me