seems a bit casual in this shop! I once worked in a plating shop where gold plating was done. The gold anodes were very carefully weighed at the start and at the end of a shift, to prevent anyone taking a few "slivers" of metal
Сам ювелир, посмотрел ролик, волосы дыбом встали. По качеству отливок, по инструментарию, по количеству стружки, да еще и под ногами складывается впечатление что это слесарный цех, а не ювелирная мастерская.
Для столь дорогого материала как то все плохо организовано... Одни точат, другие в телефоне залипают... Объем стружки как будто детали точат... Скорее всего это что то с минимальным содержанием золота или бижутерия из латуни.
Согласен,сток соли туда впихнул и соды чё окуеть можно все на глаз...засипал...Кусочки земли и пластмаси... 💯 Пудов там примеси дохуя и это не Золото ,а Латунь...
Условия пипец, такое чувство что попал в подвал где делают барахло для Алика... Как по мне в хорошем цеху должно быть чисто как в нормальной частной клинике. А тут срач и нарушение техники безопасности
I bet they only have those 5lbs of gold that they keep processing and remelting over and over again. And they make videos of it. With 10 million clicks in 9 months per video, you can already keep a business going. Great idea. Thumbs up!
In some rare valuable metal processing plants they actually have special rollers their employees step on when they leave that pull the tiny partials of gold and other precious metals that get past their primary recovery systems into the air, onto the floor, and eventually stepped on and onto the shoes of employees. The rollers clean the shoes of the tiny particulate and collect it. They said throughout the year the machine collects nearly $40K in gold and other rare metals they produce. Very cool!
@@ATLTraveler just like this video. there's parts of major cities like New York that have entire blocks of jewelry stores that make and repair jewelry. The shavings and dust walk out on the employees and customers clothing and fall into the cracks in the sidewalk. The owner of a jewelry repair in my town told me that the mat he stands on while working yields about 4 ounces of mixed precious metals every year when he incinerates it for recovery. I imagine at least a little is on the floormats of his car as well.
In Michigan there was a shop that specialized in machining titanium to make impellers for subs. They had metal detectors at all exits for employees. Stuffing pockets with chips can be big money in the right shop
This is pretty common in the industry. I did some consultant work for Heraeus metal processing in LA, and we had to go through Sally ports with metal detectors on the way in and out. I was told they process over a billion worth of precious metals in that one facility.
It's insane govt facility's making computor chips for millitary aircraft don't have metal detectors but scrap processing plants here do its comical actually
@@bobbouchee1452 It's because the govt doesn't have a profit motive. They just take money from taxpayers so why should they care if they lose money? They can just print some more or tax some more. They don't care.
100 gram veya daha küçük külçeler presle üretiliyor sanırım ama örneğin 1 kiloluk külçeleri dökerken, ağırlık olarak bu kadar hassas nasıl yapılabiliyor? Hem çok hassas olarak ağırlık ölçülmeli, hem de çok sıcak. Biraz fazla döküp sonradan balans ayarı yapar gibi düzeltme mi yapılıyor?
I'm so triggered by the fact that he just threw in that random green piece of trash in with the gold. I mean I know it will get burnt out, but still!! Just take it out man!
@@benjames8211 nah bro 6:08 he just threw that shit in there. I feel like he did that shit just to trigger people lmfao it was sitting directly on top of that scoop.
He didn't pick it up because it was totally irrelevant. The only relevant materials in that moment were other metals (magnet use), the rest goes up in smoke and doesn't influence the process whatsoever. They are not coiffeuring dolls in there...
Putting our time and effort in activities and investments that will yield a profitable return in the future is what we should be aiming for. Success depends on the actions or steps you take to achieve it. Show me a man without investment and I'll tell you how long it takes to go bankrupt. Investing creates a safe haven for the future. With the right investment choice that has at least a 10% minimum risk and with the advice of an expert, profits and interest is guaranteed.
Starting early is the best way of getting ahead to build wealth, investing remains a priority. The stock market has plenty of opportunities to earn a decent payouts, with the right skills and proper understanding of how the market works.
@@hassanrahman3524 Venturing into the bitcoin without an adequate orientation with a professional broker for accurate signals, you might lose all your hard-earned money
@@hassanrahman3524 You see in trading cryptocurrency, one requires more than just a primary knowledge of crypto. It is best to trade with an expert to avoid unnecessary losses. It's advisable to have a professional trader/broker who is an expert in the field to help you manage your account.
I'm into Real Estate, but I took the decision to invest in the Crypto market and I have been getting good returns on my investments. The market is also an effective way to grow wealth.
I worked for induction technology corporation and inducto therm, building electric furnaces and power supply units for processing and converting gold and other precious metals into bullion and bars. When we would get the furnaces back for servicing, I would collect the slag and pure metals that would spill out of the crucible and into the furnace, where I would collect and pawn it. Mostly it was gold, silver and platinum. I remember that one of our clients was Englehart. There were many other gold processing companies, unfortunately their names are lost to me. We had clients all over the world that had new induction furnaces made and or reconditioned. Cool video, definitely takes me back a few years.
Look at the end of the video. A tiny ingot weighs 1.5 Kg. Such a small ingot of another metal like brass would not be 1.5 Kg. Gold is heavier than lead of the same volume. This ignot is probably 75% (18 carat) or slightly less gold.
Fatih bey sana teşekurle olsun bu işleri gözel tahkip ediyorsun .birde yakutun testini nasil yapiliyor. Elmasin testini bize gösterdin yakutunun da testini gösterir misin memnun olurum kanalinizi beğeniyorum hoşça kaliniz
its cool to see "waste product" gold shavings be reclaimed and turned back into usable metal. i wonder how long it would take to produce enough shavings to equal one of those 25kg bars.
Altının gramı arttıkça köşe bucak çapaklar toplanıyor sanirim :) Ne de olsa 1 gram çapak an itibariyle 510 TL :) Finalde yanlış görmediysem çapaklardan 150 gr altın çıktı. Tutarı da siz hesaplayıverin artik :)
@Onur Türk hurda değil onlar torna çapakları eritme potasına hurda bilezik attıklarını görmedim ben eğer 22 bilezik çalışıyorlar ise 916 milyem dir yani 22 ayar altın erdikten sonra rapor yapılır ve çıkan milyemi hesaplanarak has altına çevirme yapılır has diye çevirdikleri de tam has değildir 995 milyem dir...
Esse ar comprimido em contato com a pele é um perigo cara. Já trabalhei com material em altas temperaturas e o mais perigoso sempre foi o uso inadequado de ar comprimido. O ar comprimido e lubrificado com fluídos, se esses fluídos entrarem na corrente sanguínea o resultado não vai ser nada agradável, fora os danos na superfície da pele causados pelo força do ar, que pode chegar a causar enfisema subcutâneo.
Cara, Vc está fazendo um exagero, nem todo ar comprimido provoca isso, e nem todo compresso usa óleo, vide os compressores medicinais e para o setor alimentício
O altın tozları, parçaları hepsi aynı ayarda mı ? Süpürge, altınlarla beraber, yerdeki bütün tozları da çekiyor ve sonra o tozları altınla birlikte eritiyorsunuz . . Demek ki altın külçelerinin içinde, toz ,toprak, kir vb herşey var.
You guys know more than me but have you tried putting your magnet in a bag so it’s easier to remove the things that stick to it ? Or is that a bad idea ?
@@mattiapresti7295 What does that have to do with what I said ?? At 5:00 they use a magnet , I assume Cleaning a magnet that you’ve used to get all the magnetic material out of your gold shavings must suck . . .
Dónde trabajaba antes de maquinar se pesaba el material y al terminar el proceso, se vuelve a pesar hay un poco de perdida, pero debe de ser mínima, esto en cada proceso, torno, fresado o vaciado 🤷🤷🤷
siento raro el vídeo, algo no esta bien ahí; es mucho dinero tirado en el suelo y en todas partes, se que las empresas que trabajan con oro no tienen instalación impecables mas si son limpias, aquí veo gramos de (oro) como si fuera hierro tirado en el suelo.
Мне кажется, в таких цехах на рабочего выделяется напр. 100 г. драг. метталл или сколько ему необходимо в рабочую смену, и потом всё это звещивается изделия, отход и т.д. если будет недохватать предел допустимой нормы, то логично рабочий за это отвечает.
So good questions. The powder is borax. It helps bring out impurities within the metal you are smelting. As for the oil like substance; probably a lubricant to reduce the chances of the bar melting to crucible. It probably also gets rid of any grime or moisture.
@@Американскийшпион-й9л я не ювелир,но я держал в руках разные металлы,включая латунь и золото. И могу сказать что на видео,и правда золото. Только другого сорта.
Lo que más me impresionó fue la poca seguridad laboral que tienen, se imaginan trabajar con sandalias croc y sin guantes o cubrebocas para no inhalar tantos químicos! wtf!
Это где так с золотом работают ?? Хотя судя по огромным стружкам это латунь или бронза . Я был на заводе где производят золотые украшения там такого бардака нет .
At 11:26 “Oops. Ah dangit. I missed the mold again… I’m not gonna weigh these little overpour buttons. I’ll just say there must’ve been some impurities burned off during the melt.”
Before even watching, I work at Alro Steel, we have these shavings and we air broom them into a pile at the end of every shift and out the shavings in big cardboard crates for it to be shipped off and melted back down. Saves the company a lot of wasted money, we also have scrap containers with actual pieces too.
En este video solo se mostro el proceso de recuperacion del oro. Y claro que es oro, pues ese proceso es costoso para otro metal como el bronce o el cobre que solo vale la pena fundirlo por toneladas o por cientos de kilos
Bi altinci arkadaşim.vardi uretim tamire gelen yuzuklerden falan traşlama Yapildigini söylemişti patronlari oyle oyle bi ton yolunu bulmuş o yuzden tamire verilen altinlarinizi vermeden tartin sonra tekrardan tartin
Охренеть я токарем работаю ,постоянно в носках рабочих стружка остаётся,так можно домой потихоньку и натаскать ))но думаю там и в жопе эту стружку найдут если захотят
Я ювелир и наверно уже от каждого своего знакомого слышал - ты наверно домой кучу золота натоскал? Я уже им не объясняю что золото берется с клиента под запись и за каждый проебанный грамм придётся платить со своего кармана
Был репортаж с золотого завода,там заставляли всех раздевается ,принемать душ и потом одевали раб форму,при выходе все повторялось,плюс сканер чтоб в ж не пронесли
seems a bit casual in this shop! I once worked in a plating shop where gold plating was done. The gold anodes were very carefully weighed at the start and at the end of a shift, to prevent anyone taking a few "slivers" of metal
步
@Jurtez Lupa you do that if it makes you happy, but remember...thieves will not inherit the kingdom of God
@@GOLDSMITHEXILE 🐕👺
Could be a family run business where things are more loose
@@GOLDSMITHEXILE God is a thief
Сам ювелир, посмотрел ролик, волосы дыбом встали. По качеству отливок, по инструментарию, по количеству стружки, да еще и под ногами складывается впечатление что это слесарный цех, а не ювелирная мастерская.
Для столь дорогого материала как то все плохо организовано... Одни точат, другие в телефоне залипают... Объем стружки как будто детали точат... Скорее всего это что то с минимальным содержанием золота или бижутерия из латуни.
Согласен,сток соли туда впихнул и соды чё окуеть можно все на глаз...засипал...Кусочки земли и пластмаси... 💯 Пудов там примеси дохуя и это не Золото ,а Латунь...
Чего только не делают ради контента.. бронза латунь медь😁
Такие опилки с пола только на аффинаж сдаются.Бред какой-то.
Условия пипец, такое чувство что попал в подвал где делают барахло для Алика... Как по мне в хорошем цеху должно быть чисто как в нормальной частной клинике. А тут срач и нарушение техники безопасности
I bet they only have those 5lbs of gold that they keep processing and remelting over and over again. And they make videos of it. With 10 million clicks in 9 months per video, you can already keep a business going. Great idea. Thumbs up!
De hecho no parece oro , parece bronce ,inclusive cobre del rojizo.
In some rare valuable metal processing plants they actually have special rollers their employees step on when they leave that pull the tiny partials of gold and other precious metals that get past their primary recovery systems into the air, onto the floor, and eventually stepped on and onto the shoes of employees. The rollers clean the shoes of the tiny particulate and collect it. They said throughout the year the machine collects nearly $40K in gold and other rare metals they produce. Very cool!
You’ve ever seen that one video of the guy who gets gold and other metals from cracks in the sidewalk ?
@@jerseydevil1 i know there's platinum and stuff on the highways from catalytic converters, why would their be gold on the sidewalk ?
@Repent or you will likewise perish. no thx
@@ATLTraveler lol idek really but search it up it’s pretty interesting
@@ATLTraveler just like this video. there's parts of major cities like New York that have entire blocks of jewelry stores that make and repair jewelry. The shavings and dust walk out on the employees and customers clothing and fall into the cracks in the sidewalk. The owner of a jewelry repair in my town told me that the mat he stands on while working yields about 4 ounces of mixed precious metals every year when he incinerates it for recovery. I imagine at least a little is on the floormats of his car as well.
Young Man is very skillful,
And the whole process of turning those scrapings of Gold burs into a Gold Bar was very Impressive. 👍
...Had me mesmerised. Gave me a mild case of the gold fever.
I NEED THAT BAR IN MY LIFE!!
Это токарь просто золотые руки... золотые зубы, да в принципе у него и дома всё золотое.😄
😁😂😁
In Michigan there was a shop that specialized in machining titanium to make impellers for subs. They had metal detectors at all exits for employees. Stuffing pockets with chips can be big money in the right shop
😯😯
This is pretty common in the industry. I did some consultant work for Heraeus metal processing in LA, and we had to go through Sally ports with metal detectors on the way in and out. I was told they process over a billion worth of precious metals in that one facility.
Hell we had people taking copper chips, weld tips and any chunk they could conceal at a weld factory I worked at.
It's insane govt facility's making computor chips for millitary aircraft don't have metal detectors but scrap processing plants here do its comical actually
@@bobbouchee1452 It's because the govt doesn't have a profit motive. They just take money from taxpayers so why should they care if they lose money? They can just print some more or tax some more. They don't care.
I love the complete lack of safety equipment and the little pieces of paper that ended up in the furnace.
Agreed
Gotta love the security sign on the door to the acid room telling you to use goggles, gloves etc. And nothing is used what so ever.
I was thinking the same thing 🤔
Bad company
I’m saving all my wood shavings I figure it is worth it’s weight in gold at this point.
Basically
Make sure your wood shaving investment does not go up in a cloud of smoke when you melt it down. 😄
Lol I love it
It was. Lumbar prices fell dramatically.
@@Gravvvyyy जेड,,,,,,जेड,,,,,,,,जेड😙😙😙😙😙😙
"Hey y'all, the vacuum broke again. Imma take it home to fix it👍."
😂😂😂😂
😂😂😂😂😂😂
Jerry, this is third time in this month, also congrats on the new car mate!
Bosses email: Ciao!! 🤣🤣😂😂
100 gram veya daha küçük külçeler presle üretiliyor sanırım ama örneğin 1 kiloluk külçeleri dökerken, ağırlık olarak bu kadar hassas nasıl yapılabiliyor? Hem çok hassas olarak ağırlık ölçülmeli, hem de çok sıcak. Biraz fazla döküp sonradan balans ayarı yapar gibi düzeltme mi yapılıyor?
666⁶
Everyone has a very important job. Fascinating process. From Sacramento, California 👌🥰🙏
I'm so triggered by the fact that he just threw in that random green piece of trash in with the gold. I mean I know it will get burnt out, but still!! Just take it out man!
4:28 he picked it out
@@benjames8211 6:12 he didn’t
@@benjames8211 nah bro 6:08 he just threw that shit in there. I feel like he did that shit just to trigger people lmfao it was sitting directly on top of that scoop.
He didn't pick it up because it was totally irrelevant.
The only relevant materials in that moment were other metals (magnet use), the rest goes up in smoke and doesn't influence the process whatsoever.
They are not coiffeuring dolls in there...
@@jackwhatever4749 Did you even read my original comment?
가공 중에 떨어져 나오는 거를 해리라고 합니다.아무리 자석으로 걸러 내더라도 자성에 반응 안하는 금속들도 있을 수 있습니다.이래저래 녹이면 녹일 수록 불순물들이 달라 붙어 품질이 떨어져 정밀검사후 순금 함량이 몇 퍼센트인지 확인 후 14k 18k등으로 가공합니다
23.9 karat gold happy now 😑
자석으로 거르고 마지막에 산으로 조져도 불순물은 어쩔수 없나보군요
10:35 - Always remember to pre-heat your molds, to prevent a steam explosion.
💯👍👍💯
Always pre heat your oiled oven pan for good roast potatoes. Seems good ideas are good ideas for other stuff :)
Putting our time and effort in activities and investments that will yield a profitable return in the future is what we should be aiming for. Success depends on the actions or steps you take to achieve it. Show me a man without investment and I'll tell you how long it takes to go bankrupt. Investing creates a safe haven for the future. With the right investment choice that has at least a 10% minimum risk and with the advice of an expert, profits and interest is guaranteed.
Starting early is the best way of getting ahead to build wealth, investing remains a priority. The stock market has plenty of opportunities to earn a decent payouts, with the right skills and proper understanding of how the market works.
Binary trading is a good and reliable way of building wealth which also create opportunities for crypto Believers.
@@hassanrahman3524 Venturing into the bitcoin without an adequate orientation with a professional broker for accurate signals, you might lose all your hard-earned money
@@hassanrahman3524 You see in trading cryptocurrency, one requires more than just a primary knowledge of crypto. It is best to trade with an expert to avoid unnecessary losses. It's advisable to have a professional trader/broker who is an expert in the field to help you manage your account.
I'm into Real Estate, but I took the decision to invest in the Crypto market and I have been getting good returns on my investments. The market is also an effective way to grow wealth.
Très intéressant, toujours amusant de voir les normes de sécurité selon les pays. Là ils manipulent le métal en fusion..... en chausettes 😁
Welcome to Turkey 😄
Heureusement qu'il y a les crocs de sécurité 😂
@@bricejacquin4432 c'est vrai. xD
💯👍👌
C’est des chaussettes de sécurité
Yerden fırça ile süpürdüğü şeyler içinde toz toprak yok muydu? Onlar da girmedi mi külçenin içine şimdi?
Hortumun ucuna Kucuk bir perde yada koltuk başlığı taksanız cok daha rahat olur
-Так вы куда это с пылесосом?
-да я только пыль вытрехнуть.
- смотри мне пылесос не слямзи я тебя запомнил🤨
Поржал
Milyonların aklındaki soru:)
Acaba kaç paradır
I worked for induction technology corporation and inducto therm, building electric furnaces and power supply units for processing and converting gold and other precious metals into bullion and bars. When we would get the furnaces back for servicing, I would collect the slag and pure metals that would spill out of the crucible and into the furnace, where I would collect and pawn it. Mostly it was gold, silver and platinum. I remember that one of our clients was Englehart. There were many other gold processing companies, unfortunately their names are lost to me. We had clients all over the world that had new induction furnaces made and or reconditioned. Cool video, definitely takes me back a few years.
Emeğinize sağlık. Ama keşke maske taksanız. İşlemler sırasında çıkan gazları soluyorsunuz. Güzel video olmuş.
Для этих целей нужен не обычный пылесос, а пневматический, работающий от компрессора
А я все ждал что в конце уборки он высыпет содержимое пылесборника в унитаз и смоет )
@@denischas4602 с виду обычная бронзовая стружка
Видно, что это не золото
@@Антон-т9х6х да золото это. Просто процесс производства похабно устроен.
Eu limpo essa oficina com maior prazer!
Olha, um BR. Olá amigo, vc gosta de pipoca?
Eu tbm e não quero nem salário, só quero sair com o saco do aspirador de pó pra jogar fora...
@@vgzinnt7217 vc disse pipoca?
@@dariojunio9798 pipoca
Não se trabalha com ouro desta forma... ourivesaria de ouro é muito cuidado...estranho!
По-моему, это обыкновенная латунь! 😁
Согласен держал легко руках весо не чувствовал
@@АнатолийГрицаев-и8х или бронза
Non..
Look at the end of the video. A tiny ingot weighs 1.5 Kg. Such a small ingot of another metal like brass would not be 1.5 Kg. Gold is heavier than lead of the same volume. This ignot is probably 75% (18 carat) or slightly less gold.
@@danhilti8543 The ingots appear to have never been tampered. They appear to be weighed while in liquid form.
Woooow ❤️ etkileyici ve cok guzel bir videoydu. El amegi ❤️🙏🙏
Fatih bey sana teşekurle olsun bu işleri gözel tahkip ediyorsun .birde yakutun testini nasil yapiliyor. Elmasin testini bize gösterdin yakutunun da testini gösterir misin memnun olurum kanalinizi beğeniyorum hoşça kaliniz
Примерно так и представлял себе. Спасибо вам за видео что снимаете. Очень интересно
А зачем тебе это представлять, дел других нет?)
its cool to see "waste product" gold shavings be reclaimed and turned back into usable metal. i wonder how long it would take to produce enough shavings to equal one of those 25kg bars.
It's not a 25kg bar.
@@jeshkam they do make gold bullion that goes to the 25kg weight, which is generally one of the larger units of gold.
@@an8thdimensionalbeing142 Yeah, but not the one he made here.
Rapaz Nunca nem vi uma limpeza tão bem feita , se lixo fosse ouro não existiria preguiçoso🤣
if garbage were gold the gold economy would be flooded and gold would be worth less than lead
😂😂
kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk kkkkkkk essa é boa
ben hep merak ederim musterinin getirdigi parmagina olsun diye o kucultulen altin yuzuk vs. onlarin kalintilari noluyor
Amazing proces. Thank you😀😍
Altının gramı arttıkça köşe bucak çapaklar toplanıyor sanirim :)
Ne de olsa 1 gram çapak an itibariyle 510 TL :)
Finalde yanlış görmediysem çapaklardan 150 gr altın çıktı. Tutarı da siz hesaplayıverin artik :)
150 gr değil 1.500 gr altın var orada 22 ayar olarak ve 1.374 gr has var 683.000 bin TL altın var 😉
@@tacyldzgold7745 hocam Kralsın, hesap işinden kurtardın bizi 😊 tozu bile 6yüz bin küsür bişey
@@alidiego7601 🤣🤣
😁
@Onur Türk hurda değil onlar torna çapakları eritme potasına hurda bilezik attıklarını görmedim ben eğer 22 bilezik çalışıyorlar ise 916 milyem dir yani 22 ayar altın erdikten sonra rapor yapılır ve çıkan milyemi hesaplanarak has altına çevirme yapılır has diye çevirdikleri de tam has değildir 995 milyem dir...
OK When your vacuum stops working I want it LOL
Esse ar comprimido em contato com a pele é um perigo cara. Já trabalhei com material em altas temperaturas e o mais perigoso sempre foi o uso inadequado de ar comprimido. O ar comprimido e lubrificado com fluídos, se esses fluídos entrarem na corrente sanguínea o resultado não vai ser nada agradável, fora os danos na superfície da pele causados pelo força do ar, que pode chegar a causar enfisema subcutâneo.
Cara, Vc está fazendo um exagero, nem todo ar comprimido provoca isso, e nem todo compresso usa óleo, vide os compressores medicinais e para o setor alimentício
O altın tozları, parçaları hepsi aynı ayarda mı ?
Süpürge, altınlarla beraber, yerdeki bütün tozları da çekiyor ve sonra o tozları altınla birlikte eritiyorsunuz . .
Demek ki altın külçelerinin içinde, toz ,toprak, kir vb herşey var.
That would make an excellent scrubber for pots and pans
Too soft
Интересно, какое изделие из золота можно обработать на токарном станке, чтоб осталось так много стружки???
Золотой самотык что-ли ?
Ну бля, отличный комментарий. 😄👍
Золотой пи3ды колпак
Ёршик)
@@evgenynikitov5561 точно
К примеру очиститель воздуха на косметической станции в жилом блоке вес изделия 16 кг
Это было очевидно а вот на несколько минут растягивать видео в моменте где он пылесосит , ну такое себе))
Да по-любому мешки для сбора пыли домой уносят бонусом а к концу года глядишь Лексус
@@СергейПопов-с3т7е пылесос безмешковый ведь ,контейнерного типа
The most expensive "steel wool" ever. Gold wool
Nah, most expensive dish scrubber 😉
Never is a machine so clean after working on it,😁😁😁
You guys know more than me but have you tried putting your magnet in a bag so it’s easier to remove the things that stick to it ? Or is that a bad idea ?
@@mattiapresti7295 What does that have to do with what I said ?? At 5:00 they use a magnet , I assume Cleaning a magnet that you’ve used to get all the magnetic material out of your gold shavings must suck . . .
@@mattiapresti7295 my question still stands
That's the quietest vacuum I've never heard
I thought that😂
If only my mum had that when I was younger
*ever
Scrap turned Liquid Gold into fine Bar…… 👌🏽
Капнул мимо немного..Но на кольцо хватит.
Ахаха
Beautiful process 👌
Basınçlı hava ile deriye hava tutmak sağlıklı bir yöntem değil. Deri üzerinde kalan parçacıkları derinin alt kısmına itme riski yüksek, dikkat edin.
Buen dato
Daha önce söylemediğin için adam kanser oldu.
Dónde trabajaba antes de maquinar se pesaba el material y al terminar el proceso, se vuelve a pesar hay un poco de perdida, pero debe de ser mínima, esto en cada proceso, torno, fresado o vaciado 🤷🤷🤷
siento raro el vídeo, algo no esta bien ahí; es mucho dinero tirado en el suelo y en todas partes, se que las empresas que trabajan con oro no tienen instalación impecables mas si son limpias, aquí veo gramos de (oro) como si fuera hierro tirado en el suelo.
Yes, I also cook my gold burrs with salt. I like to also add some garlic and basil in the process.
Oh well, maybe that was a different recipe.......
Мне кажется, в таких цехах на рабочего выделяется напр. 100 г. драг. метталл или сколько ему необходимо в рабочую смену, и потом всё это звещивается изделия, отход и т.д. если будет недохватать предел допустимой нормы, то логично рабочий за это отвечает.
Это называется установленные нормы потерь.
На бирке их тоже указывают.
What are the different things being added and why? Like the powders on the crucible and whatever was being applied to the mould? Great video.
So good questions. The powder is borax. It helps bring out impurities within the metal you are smelting. As for the oil like substance; probably a lubricant to reduce the chances of the bar melting to crucible. It probably also gets rid of any grime or moisture.
My mouth is watering. 😃
Судя по количеству отходов это совсем не золото
Латунь?
С чего ты взял? Ты специалист?ювелир?
@@softerhack_android7468 я вижу, что ты специалист-ювелир.)
@@Американскийшпион-й9л я не ювелир,но я держал в руках разные металлы,включая латунь и золото.
И могу сказать что на видео,и правда золото.
Только другого сорта.
И тем более у латуни цвет бледно-желтый.
This is the first time I ever seen machinery CLEANED ! Lol..
hahahahahaha yess!!!
Let's take off our shoes inside a shop and wear slides. Yep. Totally safety conscious 👌
It's to avoid theft
Hold on those might be crocs
That’s so nobody can say a few chips or shaving fell accidentally into their shoe.
Они бы так относились к любым материалам. А не только к золоту. Жаль что на планете нет людей а так, просто пассажиры временные
Вот к человеку бы так относились
What a nice, clean facility.
I think I'd paint everything inside the cabinet Matt black personally.
Good idea
That is a very Good Ideal!
Золотой токарь,золотой станок и золотой пылесос.)
I really didn't need to see 8 minutes of vacuuming and sweeping
Es lógico que nada se desperdicie, es Oro. Todo lo reciclan.
Автору на заметку! Заусеница бывает у самой детали, а то ,что обработанно- это стружка !
Patron yerleri bizzat kendisi süpürür kimseye bırakmaz
😅🤣
Это стружка, а заусенцы у тебя на руках, после рукопашки.
После прополки в огороде чаще
Я говорю "сбой",а это и правда всего то голдовая стружка 😁👈
Lo que más me impresionó fue la poca seguridad laboral que tienen, se imaginan trabajar con sandalias croc y sin guantes o cubrebocas para no inhalar tantos químicos! wtf!
Bienvenido a Asia 😂
Jajaja, sí, fue lo primero que pensé, con lo joven que es y está inhalando gases de todo tipo y apelando a la suerte. Qué triste.
@@sabiduriayfe6088
🗺️😂
3:13 "кем ты работаешь, сынок?
Да никем... золото пылесосом убираю..."🤣
No coolant 😍😍 The machine's so dry and clean 🥰🥰
no need for coolant gold is a great conductor of heat same goes for copper and aluminum.
Это где так с золотом работают ?? Хотя судя по огромным стружкам это латунь или бронза . Я был на заводе где производят золотые украшения там такого бардака нет .
Parabéns! Gratidão sempre!
At 11:26 “Oops. Ah dangit. I missed the mold again… I’m not gonna weigh these little overpour buttons. I’ll just say there must’ve been some impurities burned off during the melt.”
He could've pocketed a nice little button sized cheque if noone was looking 😅🤫
süpürge satılık mı?torbasıyla beraber isterim:)
Before even watching, I work at Alro Steel, we have these shavings and we air broom them into a pile at the end of every shift and out the shavings in big cardboard crates for it to be shipped off and melted back down. Saves the company a lot of wasted money, we also have scrap containers with actual pieces too.
Esse aspirador, vale ouro!
450000 eur
Quiero ese aspirador después de una semana de uso😁,yo lo limpio y te lo devuelvo😅
¿Puedo ayudarte a limpiar la aspiradora? :) :)
I can't believe you didn't notice that green shit when you were filling the melting pot
Haha loll he think its gold
I think it just burns away 😂
My OCD would never have allowed that green speck to go into the pot.
Glad I’m not the only one lol..
ruclips.net/channel/UCZ08AKbOBuaQC0sh8hcI5nQ😔🙏
The only vacuum cleaner and maybe the only device that get more valuable the more you use it. ✨😉✨
Та самая работа когда радуешься каждой заусенице принесенной домой на руках🤣🤣🤣
Oh yeah, now that's 24k right there. That cigarette butt just adds extra filtering in the process 👌
Yeah, he have supposed to be fired
Lmao!!
Да, ну вы и ювелиры конечно, у нас слесари и то аккуратнее работают..
En este video solo se mostro el proceso de recuperacion del oro. Y claro que es oro, pues ese proceso es costoso para otro metal como el bronce o el cobre que solo vale la pena fundirlo por toneladas o por cientos de kilos
Ну фиг знает на счёт слесарей, конечно))
У нас в ЖЭКе такие слесари работают, что эти турки/индусы смотрятся на их фоне интеллегентами)
abi dükkanı süpürdün yerdeki tozlar pislikler onlara ne oldu altının içinde altının değerini düşürmezmi neden böyle birşey yapıyorsunuz anlamadım ?
It's called swarf. Not burrs. Look it up.
Кутикулами ещё назовите. Стружка.)
Там киллограм в шланге остался😁
"Мистера Проппера" позовите! Он вам намного быстрее всё это уберёт. 😂 А то половина видео только пылесосили. 🤦♂️
Bi altinci arkadaşim.vardi uretim tamire gelen yuzuklerden falan traşlama Yapildigini söylemişti patronlari oyle oyle bi ton yolunu bulmuş o yuzden tamire verilen altinlarinizi vermeden tartin sonra tekrardan tartin
I didnt think I would watch someone vacuum clean for five minutes today
Уборка во дворце в Геленджике
Охренеть я токарем работаю ,постоянно в носках рабочих стружка остаётся,так можно домой потихоньку и натаскать ))но думаю там и в жопе эту стружку найдут если захотят
Я ювелир и наверно уже от каждого своего знакомого слышал - ты наверно домой кучу золота натоскал? Я уже им не объясняю что золото берется с клиента под запись и за каждый проебанный грамм придётся платить со своего кармана
Я- сантехник. У нас этого гомна навалом. И нам совсем не запрещают его брать домой...
@@МастерЮтуб-Дзюцу многие лапоухие, и проверять до грамма не будут
@@ЛёхаСнежков-б3м
9
Был репортаж с золотого завода,там заставляли всех раздевается ,принемать душ и потом одевали раб форму,при выходе все повторялось,плюс сканер чтоб в ж не пронесли
I can't help but feel this process was a test for him, and he failed some critical steps.
“I love goooooold” -Goldmember
bi soru sorcam altın işlerken frezede veya torna veya başka bişey soğutma sıvısı kullanılırmı.neden?
Bence kullanılmaz, altın yumuşak bir metal. Soğutma sıvısı sert metalleri işlerken kullanılıyor.
اللهم اتنا في الدنيا حسنة وفي الاخر حسنة وقنا عذاب النار اللهم اجرنا من حر جهنم
Amin 🌹
Çöpe atıyoruz.
Hangi çöp abi
Ramat
Çok inandırıcı.
Yani mantıklı olanı o bide onları toplamayamı uğraşacaksınız. Zaten işlerken o kadar emek veriyosunuz.
Yok onu zaten çıraklar hallediyor ustaların işi bittikten sonra gidiyorlar @@tasarlayap
Me gustó trabajo dedicación e inteligenciaen el muchacho muy buen video
That was cool to watch 😊
Some skill with that hoover, calm and collected.
Мне кажется это не золото, золото тяжёлое, а он так легко все это поднимает
Во во
Там всего полтора килограмма получился слиток.