Anytime I plug into the printer (I have an S1) the printer sparks even if the cord is connected to nothing. I have been sent a replacement and the replacement does it too.
I got Sonic pad + Spirit Direct drive + CR touch upgrading to Ender 3v2 motherboard 4.2.2 I am not able to get CR touch Autoleveling it crashes on 1st level point and so on.. Do you have fix or not?
hello almost the same here except for the motherboard. according to the Manual you have to tighten the the springs, I did not do this and gave each corner about 3 turns to loosen the springs and when from there z-offset, then the four corners en auto level. Maybee you should take a look at the video's of Ricky Impey . don't expect creality to help. their service is very poor
Ha, I find most if not all video creators are HORRIBLE with their music. It's almost ALWAYS too loud. Good background music should be just that, in the background. It should be barely audible. Just enough that you can hear that it's there and to set the mood.
The CR series is not pre-configured in the Sonic Pad yet, but you can connect to it by following another connecting tutorial for a self-defined printer: ruclips.net/video/mZMdSnUNksk/видео.html
turning out to be a real piece of SHIT: does not connect E3 pro BL v4.27 after connecting and calibrating 12hrs ago. No clues to go back and re-calibrate; will not recognize a file on USB drive!!! NOT PLUG AND PLAY. Same frustrating 3DP firmware horse shit that caused the purchase of this Fing BRICK in the first place. Time to bite the bullet and drop 1500 on a non creality printer THAT JUST WORKS.
Yer bet you cant connect 2 Ender 3 V3 SE at the same time ive tried .the sonic pad doesnt even know which USB port its using ...my new E3 V3 SE is plugged into USB port 1 and its reading as its in USB port 2 😆 Like WTF and also with the E3 V3 SE the only way you can connect it is with the serial cable it wont read the included USB cable to run a second Printer of the Exact same type ,thats why in all the youtube videos people are connecting 3-4 different printers because it cant run 2 or more of the exact same printer 🤣Pretty P!ssed off i am bring out new firmware that can run 2-4 of the exact same printer🤬🤬🤬🤬
I don't have the white gloves. Can I use brown ones?
YES. BUT DON'T FORGET TO DIP IN WHITE PAINT BEFORE USE
When is the K1 model added?
Anytime I plug into the printer (I have an S1) the printer sparks even if the cord is connected to nothing. I have been sent a replacement and the replacement does it too.
is it k1 max compatibile
Hi , i have a error key1 one , after 30 40 min , maybe its cable but i try 3 cable , print on neptune 3
I removed the Sonic Pad after installing it. Then return to using the original, best, most stable method.
I got Sonic pad + Spirit Direct drive + CR touch upgrading to Ender 3v2 motherboard 4.2.2 I am not able to get CR touch Autoleveling it crashes on 1st level point and so on.. Do you have fix or not?
hello almost the same here except for the motherboard. according to the Manual you have to tighten the the springs, I did not do this and gave each corner about 3 turns to loosen the springs and when from there z-offset, then the four corners en auto level. Maybee you should take a look at the video's of Ricky Impey . don't expect creality to help. their service is very poor
Why this loud music ???
Ha, I find most if not all video creators are HORRIBLE with their music. It's almost ALWAYS too loud. Good background music should be just that, in the background. It should be barely audible. Just enough that you can hear that it's there and to set the mood.
CR-5 PRO H?
The CR series is not pre-configured in the Sonic Pad yet, but you can connect to it by following another connecting tutorial for a self-defined printer: ruclips.net/video/mZMdSnUNksk/видео.html
6:53 lol this is awful
This thing is junk. 3 Creality printers and this will not connect to any of them.
I installed mainsail on a pi3 and connected with no issues.
turning out to be a real piece of SHIT: does not connect E3 pro BL v4.27 after connecting and calibrating 12hrs ago. No clues to go back and re-calibrate; will not recognize a file on USB drive!!! NOT PLUG AND PLAY. Same frustrating 3DP firmware horse shit that caused the purchase of this Fing BRICK in the first place. Time to bite the bullet and drop 1500 on a non creality printer THAT JUST WORKS.
Yer bet you cant connect 2 Ender 3 V3 SE at the same time ive tried .the sonic pad doesnt even know which USB port its using ...my new E3 V3 SE is plugged into USB port 1 and its reading as its in USB port 2 😆 Like WTF and also with the E3 V3 SE the only way you can connect it is with the serial cable it wont read the included USB cable to run a second Printer of the Exact same type ,thats why in all the youtube videos people are connecting 3-4 different printers because it cant run 2 or more of the exact same printer 🤣Pretty P!ssed off i am bring out new firmware that can run 2-4 of the exact same printer🤬🤬🤬🤬