Hi ! For making a quality check of print with KYOCERA: Can I swap sets of all 4 cartridges that are filled to various degrees in this printer without getting into trouble? Let’s say Original 6-20%, Refill A (100%) Refill B (50-60%), all cartridges fitted with their chips respectively. Will the counters in the chips keep track correctly, or will a 100% cartridge suddenly show „replacement“ because of the swapping? Thanks for your great video that does not leave one question open. One think to ad maybe: My refill supplier told me not to mix different brands of toner, so emptying of toner compartment and not only of waste, would be a good idea.
Hello! the use of a chip in this cartridge is optional. I get them from a local supplier, and I don't know the manufacturer's name. The toner I use is integral.
great video! I put a new compatible, but eata giving the message tonar not genuine, what can I do? it wasn't recharge, it's new compatible! is the chip defective? the machine works but stops all the time!
@@GIMIKBG ahhh!!! Ok!! I will buy 1 separate chip! boy, i'm in brazil, we work more with small machines, the hp85a toner is what we do most, do you have a good tip for blacker printing?
Hi Overthere, great video but how do you get the original plug off? And are you reusing the original plug to seal the cartridge or is this a separate brand? Where would I get those? Thx in advance
@@GIMIKBG Yeah have heard this before, but that's not how it's done in the video? There's a plug used at the top and I thought what a great idea this is :-) One other thing though: Some other guy mentioned to me that the lower part of the cartridge is for tonerwaste and burned toner, so he recommended emptying it in the refillprocess too.
Hello, a question, can the residual toner powder be used to reprint???
Hi ! For making a quality check of print with KYOCERA: Can I swap sets of all 4 cartridges that are filled to various degrees in this printer without getting into trouble? Let’s say Original 6-20%, Refill A (100%) Refill B (50-60%), all cartridges fitted with their chips respectively. Will the counters in the chips keep track correctly, or will a 100% cartridge suddenly show „replacement“ because of the swapping?
Thanks for your great video that does not leave one question open. One think to ad maybe: My refill supplier told me not to mix different brands of toner, so emptying of toner compartment and not only of waste, would be a good idea.
You can swap them withot trouble!
donde consigo el bote de toner que otro modelo le puede quedar
requiero saber si se puede recargar de la misma forma el TK-5442 DE KYOCERA
Yes!
Que es ese polvo azul que le saca al cartucho??
This is the waste toner.
hi, from where do you get the new chip to replace? Any recomendations for the powder inside those cartridges, or just get anything?
Hello! the use of a chip in this cartridge is optional. I get them from a local supplier, and I don't know the manufacturer's name. The toner I use is integral.
thanks a lot! do i should just leave the old original chip on?@@GIMIKBG
Thanks, Can I to know the name of this powder toner do you use, pleas
It is no brand toner. I am bying it from a local suplier! Sory i cant help you!
great video! I put a new compatible, but eata giving the message tonar not genuine, what can I do? it wasn't recharge, it's new compatible! is the chip defective? the machine works but stops all the time!
Sure, it is from the chip!
@@GIMIKBG ahhh!!! Ok!! I will buy 1 separate chip! boy, i'm in brazil, we work more with small machines, the hp85a toner is what we do most, do you have a good tip for blacker printing?
buenos dias, cuanto de toner le pones ?
Hi. For C,M,Y - 45g. for K - 70g.
Bonjour, où vous procurez-vous la poudre de toner TK-5240 ? Merci
From suplier here, in Bulgaria!
Hallo, apakah setiap catridge itu juga tempat limbah tonernya ?
Yes, it is!
Thank you
Hi Overthere, great video but how do you get the original plug off? And are you reusing the original plug to seal the cartridge or is this a separate brand? Where would I get those? Thx in advance
When the toner cartridge is original, I use a soldering iron to drill a hole.
When I am ready with the filling, I close the hole with warm silicone.
@@GIMIKBG Yeah have heard this before, but that's not how it's done in the video? There's a plug used at the top and I thought what a great idea this is :-)
One other thing though: Some other guy mentioned to me that the lower part of the cartridge is for tonerwaste and burned toner, so he recommended emptying it in the refillprocess too.
Yes, it must be emptying!
Sorry, I missed that you're already doin' this in the first part of your vid. I thougth you just emptied the upper part.
No problem! Its OK. :))
Y el chip como se cambia ?🤔
It is simply glued to the toner cartridge.
You remove the old one and glue the new one.
Thanks for your comment!
In a situation where am unable to get the chip to replace.Please what can I do