Do you know how to take out the main board? I’ve managed to take everything out except for the board which I have to clean since it has corrosion on it and I’m hoping that the clean will fix the issues I’m having with it
@@mygiguser i have made a fix idk how long it will last its a tie wrap with 2 holes made with a very hot screwdriver and it fits perfect but yea idk if it lasts long
The pressure created by the woofers in the front moves the passive radiators on the sides, that’s how basically all JBL speakers work singe the charge 2nd gen, XTREME 1st gen, flip 3rd gen, go 2nd gen and the original boombox. It’s an easy way to get extra bass without sacrificing the speaker’s waterproofing and also it can help reduce the pressure inside the speaker that may get a little extreme if you use a large fully enclosed casing without passive radiators
My brother lent me his jblxtreme and the battery went bad in my hands, I feel really bad and I want to fix it, I’m more than capable of doing so now thanks to you but I’d still want some info on replacing the battery, do i need to tear it down fully like shown to access the battery or is it as simple as taking off the battery cover and replacing it that way? And do you have any good battery recommendations that would work for the speaker?
AleKs_A no, you don’t need to take it apart completely. If you want to make it fast, you probably find an original battery on eBay. No special preference what brand of batteries to use. The higher the Ah the longer they last?
Good but not complete! I got big issues with the TRIP-KEY-BOARD (under the Control Buttons) My Board get wet and the conductors C900 and C901 corroded away. Find no exact value, to order new ones😣 propably someone got a working board and tell me the values?
@@mygiguser yes this board. 6 Switches, 6 LEDs, 6Resistors, and 2 defect conductors, called C900 and C901 on this simple PCB. Defect ductors affect non working buttons and selfstarting Xtreme. I am very happy if you can measure the value from this two conductors, everything else on my board should be okay. Check the Buttons and all working perfectly. Thanks
Hello, i have a problem with my JBL Xtreme. When i try to turn it on it doesn't do anything even when plugged in to the charger. No buttons and no lights, absolutely nothing. I alreasy checked the charger, charger is fine, with a good voltage of 19.53V and i tested the on/off button on my other working JBL Xtreme and its totally OK. The button(s) work. But as soon as i plug it into the official main board: no response at nothing. I also checked the battery. Battery is also fine. I think the problem lies in the main board, but could you tell me what it could be? Thanks!! :)
@@fuehwbdb3765 yeahh, sadly i didn't found a fix to this, you can replace the main board or just buy another one (used) to repair or for main use... i'm sorry i couldn't help u mate
You have no idea how long i've searched for a detailed video
Heck ya. Thanks. Headphone jack broke off on the inside. Took apart and popped out. You saved me. Thanks again
I love this
😍😍
Finally a good guide nice
Do you know how to take out the main board? I’ve managed to take everything out except for the board which I have to clean since it has corrosion on it and I’m hoping that the clean will fix the issues I’m having with it
well, as i show in this video, there are only a few screw left, and after you disconnect all the cables, it slides out to the side.
Una pregunta son los mismos altavoces que la Xtreme 2 o cambian de dimensiones
i lost one of the small handles that hold the strap that comes with the jbl xtreme do you know any sites that sell these handles
all you can try is ebay. Some people sell spare parts out of broken units.
@@mygiguser i have made a fix idk how long it will last its a tie wrap with 2 holes made with a very hot screwdriver and it fits perfect but yea idk if it lasts long
is there a way to access the buttons ? i cant take out the grey rubber layer.
Actually , someone in youtube already modified the xtreme with a 18650 battery , it works well :)
Yip, did by JBL with 18650 and works just fine without having to cut or modify the casing, very tight fit, but does fit.
How much volt does it require from the battery? 12?
@@Negiku 7.2V
is there a second battery?
just one
I felt betrayed when I first opened it and found out the woofers are not powered, but they seem to work anyway, anyone know how?
magic
The pressure created by the woofers in the front moves the passive radiators on the sides, that’s how basically all JBL speakers work singe the charge 2nd gen, XTREME 1st gen, flip 3rd gen, go 2nd gen and the original boombox. It’s an easy way to get extra bass without sacrificing the speaker’s waterproofing and also it can help reduce the pressure inside the speaker that may get a little extreme if you use a large fully enclosed casing without passive radiators
Does someone know hot to replace the hooks used to carry the speaker. Mine are all messed up and would like to replace them. Any help is appreciated.
What is breathing in the backgraund
me
It's called ASMR my dude
Why didnt you pull the amplifier?!
dan fishermen well, it’s glued in
I also wanted to see some amplifier porn
My brother lent me his jblxtreme and the battery went bad in my hands, I feel really bad and I want to fix it, I’m more than capable of doing so now thanks to you but I’d still want some info on replacing the battery, do i need to tear it down fully like shown to access the battery or is it as simple as taking off the battery cover and replacing it that way? And do you have any good battery recommendations that would work for the speaker?
AleKs_A no, you don’t need to take it apart completely. If you want to make it fast, you probably find an original battery on eBay. No special preference what brand of batteries to use. The higher the Ah the longer they last?
@@mygiguser thank you so much!
Good but not complete! I got big issues with the TRIP-KEY-BOARD (under the Control Buttons) My Board get wet and the conductors C900 and C901 corroded away. Find no exact value, to order new ones😣 propably someone got a working board and tell me the values?
Simon Voigt is that the board under the buttons? that’s glued in?
@@mygiguser yes this board. 6 Switches, 6 LEDs, 6Resistors, and 2 defect conductors, called C900 and C901 on this simple PCB. Defect ductors affect non working buttons and selfstarting Xtreme. I am very happy if you can measure the value from this two conductors, everything else on my board should be okay. Check the Buttons and all working perfectly. Thanks
@@mygiguser it's like a "Glue tape", mountet under the buttons to hold it together. Sorry for my bad English.
Can I take the mainboard of the jbl extrem 2 and install it in the xtreme1?
BLACK JBL i never tried, not sure if that fits
@@mygiguser okay
@@mygiguser Would you expect that and do a video?
Boa noite amigo vc poderia me ajudar como fazer boombox 1
Is this ASMR?
Jeff sure
GG or PL?
Hello, i have a problem with my JBL Xtreme. When i try to turn it on it doesn't do anything even when plugged in to the charger. No buttons and no lights, absolutely nothing.
I alreasy checked the charger, charger is fine, with a good voltage of 19.53V and i tested the on/off button on my other working JBL Xtreme and its totally OK. The button(s) work.
But as soon as i plug it into the official main board: no response at nothing. I also checked the battery. Battery is also fine.
I think the problem lies in the main board, but could you tell me what it could be?
Thanks!! :)
Guido Simonse i have no idea
I got the same problem do you found a solution for it ?
Seems like the main board is faulty and I only used it once or twice.
@@fuehwbdb3765 yeahh, sadly i didn't found a fix to this, you can replace the main board or just buy another one (used) to repair or for main use... i'm sorry i couldn't help u mate
Спасибо!Видео очень помогло
Peaceful and the love
ну и чем закончилось? не понятно ничего
what is the size of the woofer? 2.5'' or 3''?
Not sure, i didn't measure it.
Its 63mm!
2.5
@@maxmethon yes 2.5
#ASMR
Ikr