That feeling when RUclips tutorials from you are more practical and more usefull than lessons with aou actual lector on the university :) keep up good job :)
It is so helpful tutorial- actually all of your tutorials are extremely knowledgeable. I am so impressed!!! Thank you for all hints and practical tips.
Thank ..it was gre8 help..I hv completed 3D lighting ..sometime the screen is black in color..i am unable to see the view..how to get the view visible..
Bro some of load family components are can not inserted into the project....how to insert it.....and also whats the difference between imperial and metric models
I would created Light and also fixed in the ceiling...but it does not working.....this problem only for my own family not for already exists Light in revit...... So please reply me sir your opinion helps me a lot......
Mr.Balkan first thnx for your valuable videos, but make a video about (ies) lighting files, how we put it and how we use it in our models, we need this types of lighting files, and try a little bit to be in detail to include as much as possible. Thank u in advance
I can't get a light source showing in the realistic / render view. The source is below, it works when inserted into an old project but not a new one. I'm now using Revit 2018.
hey balkan architect . if i put a light inside a room and i render an interior picture and choose interior sun only the lights still on in the rendering picture (it doesn't cast light but it appears like its still on ) what should i do plz
Hi, BA. Hope you're doing well and that I'm not too late: I have a problem: The lights rendering on my Revit (2018) are working with me at all. The types 'spot', 'square' and 'circle' lights are too dim upon rendering, and the 'line' lights are too bright. I don't understand why at all. They're all the same intensity and luminosity and color and all, and tampering with the rendering lighting/shadowing dials somewhat improves some light types only to screw over others. After days of trying to fix the problem in vain, the internet didn't give me any answers other than using the 'Photometric Web' type of lights, of which I have no families. I looked for them but couldn't find any like they show on some RUclips videos. Every time I get a bearing it betrays me. Have you any good advice here?
hey, your videos are really helpful, please guide me with how to change the color of the light family I have made, I am changing initial color, and intensity but the only light color visible is yellow. please reply it will be very great full
hi.. thank you for such a helpful video.. i hv a problem loading a second family into project though.. it says somethiing like "family 1 has been loaded, do u want to overwrite the existing version?" I was wondering if u could tell me what to do.. I already hv 1 family of lighting fixture but how do i load a second one? please reply as soon as u see this.. thank you very much
Thanks a great tutorial. I have some trouble with my project, the arquitecture modeling is finished, and I'm doing perspectives with the 3d camera. In my structural sheet i want to put two sections and a perspective full of notes of the specialty , but the 3d view is to big and I don´t know how to control the scale of it. I found a way to do it: I create a new plan view, work with the section box to specify the area of work and I put there the 3d image scanned. It's a solution a little longer because I don't know the real way to do it. I continue my search for answers, but I would be great to have you help. Thank you again.
Everything works fine till when I have to load the family to my project.. it won't let me add it and at the properties, under constraints, it'll say elevation 4000 instead of level 1 Don't know what to do
That feeling when RUclips tutorials from you are more practical and more usefull than lessons with aou actual lector on the university :) keep up good job :)
I think I've learnt more from this channel than my whole architecture degree!
so true
It is so helpful tutorial- actually all of your tutorials are extremely knowledgeable. I am so impressed!!! Thank you for all hints and practical tips.
I have the Balkan architect to thank for my degree. Thank you so much, sir
Thank u for ur videos....without ur tutorial i cant improve skills or works in revit....thanks a lot
Thank you so much for this, I couldn't make my lights work and this solved it!!!!! So grateful for this!!!
i learned a lots of Revit from you balkan architects very nice
Great Tutorial, Thank You for Your Time!
Your all videos are very helpful for me@ thanks balkan architec
Thank you!!! It really helped me for my project thank you!🙌🏻
love his tutorial....keep up the good work sir!!!
When I open a new family it has only a few options and it does not contains the metric lighting option so why does it has a few options (revit 2020)?
Im also having the same problem
Hi, I sometimes cannot load lighting fixtures in a Revit model but cannot figure out why. I need help if I am missing something.
Hey..I have a problem..when I am opening photometric web file..it is blank ..how to get that ?? Plz help
Same problem how solve it pls tell me
thanks brother, I've learned a lot from your channel.....!!!
can u please tell me from where we can get the metric lightng family? i need it for my false ceiling cove light
Thank ..it was gre8 help..I hv completed 3D lighting ..sometime the screen is black in color..i am unable to see the view..how to get the view visible..
What would be the IES for a single small LED bulb (the single unit from the LED strip light)?
It was helpful, thank you very much 👍✌🏻👌🏼
Bro some of load family components are can not inserted into the project....how to insert it.....and also whats the difference between imperial and metric models
could u show how to create sconce light that can be placed on generic mass
light source definition in revit 2017 nothing ? why? help me
Hello sir,
I want to add the lights in my Generic model.
Is it possible????
Please reply me soon 🙏
Hi, thanks for the video. Why did you locate the light source just below the fixture glass?
I would created Light and also fixed in the ceiling...but it does not working.....this problem only for my own family not for already exists Light in revit...... So please reply me sir your opinion helps me a lot......
Can you please make a video on how to create a face based lighting fixture (non ceiling light)
Mr.Balkan first thnx for your valuable videos, but make a video about (ies) lighting files, how we put it and how we use it in our models, we need this types of lighting files, and try a little bit to be in detail to include as much as possible. Thank u in advance
I can't get a light source showing in the realistic / render view. The source is below, it works when inserted into an old project but not a new one. I'm now using Revit 2018.
Solved! In 'Graphic Display Options' I went to Lighting > Scheme, the changed to 'Interior: Artificial only'
hey balkan architect . if i put a light inside a room and i render an interior picture and choose interior sun only the lights still on in
the rendering picture (it doesn't cast light but it appears like its still on ) what should i do plz
Hi, BA. Hope you're doing well and that I'm not too late: I have a problem: The lights rendering on my Revit (2018) are working with me at all. The types 'spot', 'square' and 'circle' lights are too dim upon rendering, and the 'line' lights are too bright. I don't understand why at all. They're all the same intensity and luminosity and color and all, and tampering with the rendering lighting/shadowing dials somewhat improves some light types only to screw over others.
After days of trying to fix the problem in vain, the internet didn't give me any answers other than using the 'Photometric Web' type of lights, of which I have no families. I looked for them but couldn't find any like they show on some RUclips videos.
Every time I get a bearing it betrays me. Have you any good advice here?
hey, your videos are really helpful, please guide me with how to change the color of the light family I have made, I am changing initial color, and intensity but the only light color visible is yellow. please reply it will be very great full
hi.. thank you for such a helpful video.. i hv a problem loading a second family into project though.. it says somethiing like "family 1 has been loaded, do u want to overwrite the existing version?" I was wondering if u could tell me what to do.. I already hv 1 family of lighting fixture but how do i load a second one? please reply as soon as u see this.. thank you very much
hi sir,
i am changing my lighting distribution but not changed ..
Thanks a great tutorial. I have some trouble with my project, the arquitecture modeling is finished, and I'm doing perspectives with the 3d camera. In my structural sheet i want to put two sections and a perspective full of notes of the specialty , but the 3d view is to big and I don´t know how to control the scale of it. I found a way to do it: I create a new plan view, work with the section box to specify the area of work and I put there the 3d image scanned. It's a solution a little longer because I don't know the real way to do it. I continue my search for answers, but I would be great to have you help. Thank you again.
Thank you so much! I love your videos, you're helping me a lot. Thanks for sharing your knowledge
great video
Everything works fine till when I have to load the family to my project.. it won't let me add it and at the properties, under constraints, it'll say elevation 4000 instead of level 1
Don't know what to do
Thank you
It's a struggle to learn Revit after learning Rhino, Sketchup and AutoCAD. I feel like Revit is making the most simple thing more complicated
can you make a video that for details and unknown elements or mostly used items in schedule and quantities for electrical
Well I don't know much about electrical elements, I'm an architect, but there will be a video on schedule and quantities!
can u tell me what is the diff bw metric n imperial?? only diff is represent in meter and feet?? can you tell or show in detail??
well that's the only difference, metric is used in Europe, and imperial is common in the US
great thanks so much!
Great
Thanks
thanks
It's a little confusing at first. But I know I'll get the hang of this
In this video - light souce is out side of lighter, I mean outside before defuzor, I can't undestand it
I like ur video
i find this very confusing and hard to follow.i would aprishiate and eaiser and simpler way of getting a light famikly.thank you bulky xx
🙏
Metric is king
wwow