How to pair RGBW Remote Controller / Zoner with RGBW Receiver - 4 Zone | 100.505 and 100.506

How to pair RGBW Remote Controller / Zoner (100.505) with RGBW Receiver - 4 Zone (100.506). Call 01260 540014 or visit www.ledtechnologies.co.uk

[@robhein]

Thanks for sharing, your legend👌

[@truelove8345]

Thanks for pairing advices

[@preeeby]

Thank you!

[@nyku2]

Thank you

[@mrfunnynames1742]

I can’t unpair mine or pair a new one it only worked the first time :(

[@KiatHuang]

It would be more helpful to state the full manufacture model numbers rather than the retailers - so that the video would be more findable for more people. I believe these are Mi-Light devices.

[@Tigg21004]

The controller says mi light on it so yeah they are the remote also has 4 zones so can be connected to 4 mi light controllers
But yeah that should be mentioned for those unaware

[@tedwhitmer4760]

I just got one of these. The instructions provided by MI Light DO NOT WORK. They say to press the I button 3 times but don't mention within one second. I followed the instructions in this video and it worked on the first try.

[@roanmcfadden4460]

Great video,
How do you select white with this remote? I can get all the colours but not pure white

[@BLUE-xe7ih]

Did you ever figure out how to make white with this remote model?

[@roanmcfadden4460]

@@BLUE-xe7ih Yeh I had to tap one of the buttons twice, sorry I can't remember what one. Probably the on button. It was for a job so I don't have it to hand.

[@spiraltamer]

what do you do when a controller is paired to a remote you no longer have? I have several light strips that are paired to a bridge and the bridge no longer will connect to the network. I have a remote but can't seem to get the light strip (or bulb) to release the configuration so that i can pair the remote instead.

[@somos]

Same happening to me. Did you solve the issue?

[@nuiduong6467]

Ddddfccccfccffcggvggkjop

[@tannermoldenhauer5876]

@@somos Note: If your wifi box needs resetting at any point you should stick a pin into the RST hole and hold for 3 seconds. Release the pin when the lights on the box flashes.

[@GeorgeTarabay]

@@tannermoldenhauer5876 mine doesn’t have an RST button. Any idea how I unpair?

[@braziljennifer]

Does anyone know how to open the back to put in the batteries?

[@CB27]

Look along the right edge towards the bottom. There's a little recess u can stick ur fingernail in to pull the back cover off.

[@manospediaditakis5627]

In white mode, I cant change the saturation.. The white color is blueish and hurts the eyes. The s+ and s- don’t work

[@kenny0217]

how do you get it to be solid white ?