어쩌다 유튜브에서 로켓 스토브를 알게되서 보게됐습니다만 여지껏 본 그 어떤 외국인들이 만든 것보다 더 창의적이네요. 특희 장작 투입구가 3개 인게 너무 멋지고 화력 걱정은 절대로 없겠다는 생각이 듭니다. 기름배출구도 정말 맘에 들고요. 일 잘하시는 분들 특징이 설렁설렁 하는 것 같아도 결과물은 훌륭한데 만수리님이 그러신 것같습니다. 추천, 구독 세게 한 번 드립니다.
One of the most thought out stoves I have ever seen. The only thing I will do (yes I'm stealing it) different is instead of painting it I will treat it with acid to get it to Flash Rust and then use Phosphoric Acid on it for a permanent black finish that is fireproof.
I like to see the stick welding. You're an artist with that thing. So many guys say you must have wire feed, but you're proving them wrong. Stick welding - it's just so fantastic to see this!!
Metal origami at its finest. Thanks for sharing this wonderful video. An accessory for this build would be to line the grill area with firebrick or filed clay tiles, adding a dome and door to build a pizza or bread oven. Greetings from NE Ohio. Wishing you and your family peace, health and happiness during these days of pandemic. Learn lots and enjoy making beautiful devices. Peace brother.
Это где Вы такой перевод нашли? У меня получается так: Я сделал мясной гриль, используя ракетную плиту. Труба квадратная 100 × 100 Размер бюллетеня 450 × 600 Высота плиты 750мм Длина входного порта 350 мм I made a meat grill using a rocket stove. 100 × 100 square pipe Bulletin size 450 × 600 Height plate 750mm Input port length 350mm
YES you are so CORRECT and spot on. I just made one myself follow this design. However due to the long height of the SHS 800mm lots of heat got wasted as it rises. HAd to cut off 300mm to make it work a lot better.
You could coil copper tubing inside that stove and siphon water through the coil to boil water like how a coffee maker work's and design an all purpose rocket stove. 👍😀
Хорошая идея -В три топки. Везде надо подкидывать !!!! Только для того бы поджарить ? Сделай одну !!! и меньше проблем будет Ради и деи можно и 10 -ть топок сделать.
Would a titanium gril plate had made a difference on how well the stove worked with using less fuel to heat it? Idea, use wireless charging technology with Nintinol high output thermal electrical generator's with 12 volt induction coil's with graphite rod's with a Titanium sleeve over the rod's. Heat the stove up with bio mass fuel then then the thermal electric kicks in an heats the stove in a loop. 👍😀
@@mansoolee3 My Bad I was not thinking about the whole process. The insulated Perlite combustion chamber raises the temperature above the melting temp of Steel. Which is why Ceramics and perlite cement constructions are used. So Steel for the pre burner Ceramics for the secondary hi temp combustion.
If you would of put the slightest pitch on the grill , & a tiny pitch on each side of grill towards the center of the grill to make a tiny valley in the middle of the grill with a few tiny holes, the grease would of drained straight down into the rocket stove main fire, that would of burned forever, great build thought, I'm stealing your build idea 😂😂😂😂😂😂😂
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
어쩌다 유튜브에서 로켓 스토브를 알게되서 보게됐습니다만
여지껏 본 그 어떤 외국인들이 만든 것보다 더 창의적이네요.
특희 장작 투입구가 3개 인게 너무 멋지고 화력 걱정은 절대로
없겠다는 생각이 듭니다.
기름배출구도 정말 맘에 들고요.
일 잘하시는 분들 특징이 설렁설렁 하는 것 같아도
결과물은 훌륭한데 만수리님이 그러신 것같습니다.
추천, 구독 세게 한 번 드립니다.
댓글에 몸둘바를 모르겠습니다
새 해 복 많이 받으셔요
훈훈합니당 ^^
One of the most thought out stoves I have ever seen.
The only thing I will do (yes I'm stealing it) different is instead of painting it I will treat it with acid to get it to Flash Rust and then use Phosphoric Acid on it for a permanent black finish that is fireproof.
멋진 작품이 기대됩니다
I like to see the stick welding. You're an artist with that thing. So many guys say you must have wire feed, but you're proving them wrong. Stick welding - it's just so fantastic to see this!!
훌륭하십니다.
잘 못 보아 연도를 막은 것으로 보았는데.
다시 자세히 보았습니다.
열원이 직접올라오는 부분의 보완만 있으면 상품성있으리라 보여집니다.
훌륭하십니다.
좋은의견 고맙습니다
I have built a few Rocket Stoves, but not as big as yours. Looks like it works very well. Great job!
It's big, but it's heavy. Thanks for the comments.
Have a happy day.
Great work Sir. This would be really good for our family reunion. This will be a summer project for sure. Thankyou for sharing your skill with us.
I'll look forward to the good results.
창의적이고 기발한 제품으로 장인정신이 돋보입니다.
고마워요
우리나라 분이 이렇게 창의력 있는 작품들을.. 최곱니다 ㅎㅎ
한국인 중에도 이런 채널을 운영 하는 분이 있는 줄 몰랐어요. 재밌게 봤습니다 감사해요!
찾아보시면 많아요
댓글 감사합니다
Hi. Thank you for a very interesting and useful video. All the best to you. Greetings to you from Russia.
Спасибо.
Удачного дня.
와.............이 채널은 구독을 안 할 수가 없네요!
진짜 대박! 지금까지 본 것들이랑은 차원이 다르네요!
리스펙!!!
네 고맙습니다
저도 벤지TV 구독하고 보고있네요^^
Metal origami at its finest. Thanks for sharing this wonderful video. An accessory for this build would be to line the grill area with firebrick or filed clay tiles, adding a dome and door to build a pizza or bread oven. Greetings from NE Ohio. Wishing you and your family peace, health and happiness during these days of pandemic. Learn lots and enjoy making beautiful devices. Peace brother.
Классная печь получилась!
Es un buen trabajo pero y la ceniza , tiene q ser lo mas facil posible! 👍👍
I'm very busy these days, so the video is very late
Thank you for always giving me good reviews
창의력이 참으로 훌륭합니다,
감사합니다
@@mansoolee3 외국사람들의 댓글을보니까 고기굽는 불판에대해서 많은 조언을했네요, ㅋㅋ
Excelente proyecto! Creo que ahí hay suficiente calor para que hagas un combo, esto es, mitad plancha y la otra mitad una parrilla. Me gustó la idea.
로켓스토브 일체형으로 불판 만들었네요 장작불로 삼겹살을 구워먹는 감성이 느껴진다
네 고맙습니다
Muy bueno tu vídeo, gracias por compartir tus ideas para el.mundo, cordiales saludos desde lima peru
Süper siniz süper elinize sağlık güzel bi bahce piknik sobası
thank you for your engenus gril you are the best many thanks for your great idea from Algeria
Thank you, too.
불판 위에 탈착식으로 피자화덕에 있는 둥근 통 - 앞면에 투명유리 문이 있는 -을 올려서 빵도 굽고, 피자도 굽고 할 수 있게 해주면 좋겠네요~~
Awesome craftsmanship....🤘love❤ from India🙏🕉
He's so handsome.
직열 댐퍼장치로 우회시키는 방식으로 열 조절장치하면 고기가 안탈것 같은데 잘 만들었네
경험이 없어서 그래요 더 공부해 보겠습니다
댓글 고맙습니다
구독 오지게 박습니다. 화력좋은 삼겹살불판 만드시는걸 어제 봤는데 이건 더 대단하네요. 헐
능력자!!
Need a trap door at bottom of the center burn chamber to clear out the ashes, it will eventually build up blocking the air path.
Really wonderful!,👍👍👍
👍👍👍 вот интересно название на корейском. Держак китайский болгарка русская шарнир советский 😁
Это где Вы такой перевод нашли? У меня получается так:
Я сделал мясной гриль, используя ракетную плиту.
Труба квадратная 100 × 100
Размер бюллетеня 450 × 600
Высота плиты 750мм
Длина входного порта 350 мм
I made a meat grill using a rocket stove.
100 × 100 square pipe
Bulletin size 450 × 600
Height plate 750mm
Input port length 350mm
Genial!!!!, directo entre mis vídeos favoritos. Saludos desde Paraguay.
Soldar material pintado e osso não é amigo parabéns pela sua criatividade pois nos dias de hoje temos que nos reinventar todos os dias
Obrigado pelos comentários. vou ver.
Beautiful grill.
Wasted heat at the bottom of grill.
Put a slide in/out draw to hold water
For steaming hotdogs. Or baking pizza.
Thank you for your opinion.
YES you are so CORRECT and spot on. I just made one myself follow this design. However due to the long height of the SHS 800mm lots of heat got wasted as it rises.
HAd to cut off 300mm to make it work a lot better.
Wish I could post a pic of my modified Rocket Stove design here
I would cook in a pan on top of the rocket stove because of the grease and cleanup. Great video....
Thank you
넘 잘봤어요 ㅡ
아쉬움은 도면이 없내요 ㅡㅠ ㅠ
초자는 만들지 못 하겟내요ㅡ
도면 올려주세요 ㅡ
감사함에ㅡ구독 ~꾸~~~~욱 ㅡㅎ 꾸벅 ~
Outstanding presentation 👍
손재주가 기가 막히네요
마당있는 사람들 갖고싶겠어요
고맙습니다
저도 이런거 만들어 본 적이 있는데 너무 크게 만들어서 여럿이서 궈먹을땐 최고였는데 비수기때 관리를 제대로 못했더니 완전 애물단지 되서 화분으로 쓰고 있네요ㅋㅋ
식용유 발라놓으면 녹방지됩니다^^
뚝딱뚝딱 잘만드시네요 그라인더 잠깐 들어도 손목나갈꺼같던데 쓱싹쓱싹 잘자르고 ㅋㅋㅋ굳굳 잘봤습니다 탐나네요 ㅋㅋ
고맙습니다
Cara gostei muito, muito mesmo desse fogão. Se você poder mandar o projeto dele pra mim ficarei eternamente grato.
Good work. Best wishes from New Zealand.
Thank you for watching
I feel it is the best stove
와우~~~멋져요....생수협찬도 받으시는가봐요..ㅎㅎ.....참고로 저는 속리산 마신다만 마시는데요......ㅋㅋ불판 청소하기 쉽게~~뗄수 있게 만들면 좋겠네요~~~
맛좀보게 지원좀 해주세요 ^^
Great job thanks for sharing like your idea
You could coil copper tubing inside that stove and siphon water through the coil to boil water like how a coffee maker work's and design an all purpose rocket stove. 👍😀
Good idea.
Nice workmanship, 만수! I'm a new fan of your work 👍
Thank you.
Manson Lee great for art and criative ,beauty project,
Yes, one feeding chamber is good enough; The other twos looks like art decoration.
Must be good for fried rice and sausages too.. 👌👌
Good
Excellent
Very cool! Nice work!
Thank you
Nice.. Needs to angle towards a edge so grease can drain.. Should do a wok style rocket stove.. Sweet!
I'll be patient. Thank you.
Watched a welding video...
Now I'm hungry for samgyupsal!
삼겹살을 아시네요?
Oh yes! Delicious meal!
There are 7 Korean restaurants and 2 Korean grocery stores in my small city.
There are many Korean restaurants.
Thank you for your comments.
Have a happy day.
고맙습니다.
너는 좋은 하루를 보낸다.
Da ate agua na boca muito bom parabens pelo projeto.
Sim. Obrigado. Tenha um bom fim de semana.
great design! I bet it's perfect for camping.
Thank you.
Have a happy week.
Awesome stove.. But put wheels on one side.. That looks like a back breaker of a stove.. With wheels it becomes easy to move around..
Thank you for your good opinion.
That looks hot!! Awesome build!!
Thank you
god edition. god work
Хорошая идея -В три топки. Везде надо подкидывать !!!! Только для того бы поджарить ? Сделай одну !!! и меньше проблем будет Ради и деи можно и 10 -ть топок сделать.
Спасибо
Hola MUY bueno el vídeo Saludos desde ciudad de Salta Argentina.
Que tengas un buen día.
Would a titanium gril plate had made a difference on how well the stove worked with using less fuel to heat it? Idea, use wireless charging technology with Nintinol high output thermal electrical generator's with 12 volt induction coil's with graphite rod's with a Titanium sleeve over the rod's. Heat the stove up with bio mass fuel then then the thermal electric kicks in an heats the stove in a loop. 👍😀
Do it and show us
旨そう。。。羨ましい。そしてグラインダ使うの上手いですね。
どうも。
息子が北海道留学中なのでもっと嬉しいですね。
I would (Wood) Suggest insulation (Perlite concrete) around the burn chamber to raise the combustion temp and increase burn efficiency
good idea Thank you
@@mansoolee3 My Bad I was not thinking about the whole process. The insulated Perlite combustion chamber raises the temperature above the melting temp of Steel. Which is why Ceramics and perlite cement constructions are used.
So Steel for the pre burner Ceramics for the secondary hi temp combustion.
Nice hey hey don't burn the bacon....
Nice bro I like that one
Bravo, super
Thank you so much for this. I am going to ask my son to try to make one.
I'll look forward to a great outcome.
Very good!!! Nice
Thank you
기름 배출구라니 정말 세심하시네요.
고기도 참 맛있어 보입니다!
난로들 판매해도 될 퀄리티네요^^
항상 어떤 제작 영상이 업로드될지 기대가 됩니다.
좋은 하루 보내시길 바랍니다!
고마워요
대박 대단하십니다ㅋ
판매는안하시나요^^
미안합니다
Nice job
Thank you
Work of art
한 천개 만드시면 만족한 결과가 나올까요 너무 수고하세요
멋지네요. 구들장 처럼 효율이 좋아보이네요.
네 저도 화구를 3개로 만든건 모험이었는데
처음엔 역류가 있었는데
열받은 후엔 3개문을 다 열어도 빨아들이더군요
댓글 감사 합니다
За труды пять а за практичность ...!!!
Great design, very smart
Thank you
Very good!!!
일반인은 저 핸드그라인더라는 마물을 안 쓰는게 장수의 비결이 됨.
If you would of put the slightest pitch on the grill , & a tiny pitch on each side of grill towards the center of the grill to make a tiny valley in the middle of the grill with a few tiny holes, the grease would of drained straight down into the rocket stove main fire, that would of burned forever, great build thought, I'm stealing your build idea 😂😂😂😂😂😂😂
That's a good idea.
The grease would the be going to the hottest part of your cook top catching fire before getting to the burn chamber.
Nice build.👍
개인적으로 로켓스토브라면 단열상승 구간이 가장 중요하다고 생각합니다.
상승구간에 단열을 해주시면 완전연소에 도움이 될꺼라 생각됩니다.
내 고맙습니다
그런데 이게 무게가 상당해서 엄두가 안나네요^^
Brilliant! Fun! Entertaining! Very well done! 👍
Master only one beer no more good. Job
Thank you
Ok super
Buena idea...................¿por donde retiras las cenizas ? ......¿tres alimentadores simulaneos van a obstruir el tiraje ..no?
La ingenuidad es extraída de la zona de control de aire.
Gracias
Wonderful!!!! Thank you vry much. Great stove!!!! Isaiah 55:6
Thanks for the good evaluation
@@mansoolee3 You are welcome my dear Brother. May GOD bless you and your loved ones. Ozzie
Would be even better with a Cast Iron Rectangular Grill Plate on top of the heating plate. For easy seasoning and easier clean up
how thick is your metal cook top plate?
great design love it.
from Montana USA
The top is 4.5mm thick.
Thank you for watching.
thank you for your reply!!!😀
Muy buen trabaja pero tengo una duda ¿para que es el tuvo de un costado que sobresale al comal?
A lot of goodies on this one.
Thank you
대~~~~박 입니다
괴기가 맛나 보이네요
네 혼자 먹어서 너무 아쉬웠습니다
Yo no hablo ese idioma pero que buena te quedó, exitos en tus proyectos saludos desde Quetzaltenango Guatemala
Gracias por recordarme.
Feliz día de salida.
@@mansoolee3 te invito a que mires algunos de mis videos, muchas bendiciones
Sí, lo veo.
I thought of brand name for you
"Fire Wood Stoves by Lee" aka Lee Stoves LLC
That's a big compliment.
Thank you.
Bacán.pero le faltan sus medidas y un plano . Lima Perú.saludos.
I like the craftsmanship! I want one.
Thank you for watching
Great job! Looks very handy 👍
멍때리고 잘봤습니다 ㅋ 무슨 원리인지 모르겠는데 굉장하네요
고마워요^^
Gran proyecto. felicidades
Maybe a dumb question but WHY three feed shafts?
I made it for fun, and I thought about efficiency, and I was curious.
완전 문외한인 제가 봐도 기발한데 아는 분들이 보면 어떤 느낌일까요. 댓글말대로 화력만 조절할 수 있게하고 메뉴얼만 만들면 특허해도 될듯ㅎㅎ
댓글 고맙습니다^^
Excelente diseño con 3 gargantas, muy eficiente.
Gracias por mirar.
OYE AMIGO EXELENTE VIDEO....SALUDOS DESDE. ..SUDAMÉRICA.
Gracias
Awesome job! And of course a really nice idea.
I will buy one!
^^
Super
I need that stove for my tiny home! I LOVE it!
It's not difficult.
Make it
I'll cheer you up.
상판에 돌끼울 수 있게 하는게 상품성이 좋을거 같아요. 돌판만 갈면 되자나요. 씻기도 편하고~ 목초액 같은거 찼을때 청소도 편하고 ~ ㅋㅋ
아주 좋은 방법입니다