Love this build! Turned out amazing with all the Corsair parts, love the new case design and fans/aio thanks for showing us! The 4070 Slim is cool too!
Just bought this case for my first build and have similar set up with the AIO but am racking my brain to get all 10 fans daisy chained to the one controller!
@Jman-eg9zp its definitely a lighter tint then their other cases for sure. You can see the components within the case with all glass on it with the system off which is nice
@@PidgyPCs the H150 series with the q series fans has all the connections on the radiator it looks like with the titan RX aio it has the connectors on the pump again did I miss see that?
I bought this case last weekend and did a case transfer from a Be Quiet Pure Base 500DX because it couldn't fit the anti-sag bracket that came with my 4080 super. I also used corsair's shift PSU as this case is compatible with that range of PSUs
I just bought this case recently and am new to pc building and stuff and am wondering if I need a corsair rgb hub to set up my case fans or can hook them directly to the motherboard
If you bought the version of the case that came with the fans, there is a hub in the back of the case for the fans that are included. That hub plugs into the motherboard via USB 2.0
So the case itself doesnt have an RGB strip on it so any motherboard will work as long as it matches with the RGB you want too. As far as coolers go, yes. You can add any cooler you like that will fit within the case 😁
@@PidgyPCs Yes, I plan to buy the model that comes with the 3 RS120 coolers, but I understand that I need to buy a controller, since my motherboard only has 2 argb connectors, is that correct? greetings from Argentina
@@energy2000ist greetings!! So the case with the 3 RS120 fans comes with the LINK hub on the back. It uses a USB 2.0 header to control and a PCIe cable to power the hub. If you plan on using them, you will need iCUE to control all the RGB and fan controls. It wont plug into an RGB header on your motherboard
@@PidgyPCs I thought it was only the icue link model, it is the one with the hub on the back, when you talk about ICUE it is the software, right? thank you very much for your help and time
So yeah, the fan on the left sits directly above the PSU so there is really only an inch of air being pulled through that fan, the other though is open as the PSU doesnt go that far. The air is pulled from the bottom vent of the case and through the cables
@@PidgyPCsthank you really appreciate your reply to my confusion, though I'm planning to buy it and I really don't wanna spend more on buying those other 4 fans as it only comes with only 3 , and since the one you put is pretty expensive do i have any else choice which is great but also costs less?
So I am pretty sure you can get the 3500x without the fans. This way you can get 6 fans that all match. If that doesnt work, Corsair makes LL fans that are cheaper but would require a different hub. The only other way to do is to get the LINK RX AIO as it would come with 3 fans so there are a total of 6 matching
Bro I got the corsair case 3500 And I got all my parts they are different to yours I am going to give it a try , do I need a screwdriver and screws that’s it
@@PidgyPCs Nice thanks man. Can you measure from the motherboard till the highest point, with and withour the cap? For example I now have a NZXT X63 which is 55mm according to the specs, but 60mm from the motherboard. Space is a bit tight here in the Dan Case C4 with sandwhich fan setup on the X63. Want to know if that will fit.
Love this build! Turned out amazing with all the Corsair parts, love the new case design and fans/aio thanks for showing us! The 4070 Slim is cool too!
Thank you!!! It was a lot of fun for sure!
Great vid of the build
Thank you!
That transition when you push the lazy susan under the case to start the build gave me chills. Proper chefskiss!
Thank you!!!
Looking good my bro like how u got matching rx fans nice clean build
@leewest9274 thank you! I appreciate that!
Almost 10K views man that's truly awesome.
Thank you buddy!! I know!! It goes up slowly every day and its awesome!!
awesome build 😎.
@@evofreak1304 thank you!!
6:16 soundtrack made me excited
It is a good song to be fair 😆
That motherboard is absolutely sick.
Right?! I am doing another all Corsair build, or rather.... quite a few of them....
Too bad they don't make ATX for am5
@@skymetallic they do make atx motherboards in AM5...
@@PidgyPCs I've been looking. Couldn't find any in Canada. I'll keep looking
Love Corsair and corsair will love you 😊😊😊😊❤... Lovely build 😊
Appreciate that!!! 😁😁
Just order this case today for my first build.
@@Weapon_X_107 Very nice! Enjoy the case!!!
Just bought this case for my first build and have similar set up with the AIO but am racking my brain to get all 10 fans daisy chained to the one controller!
How tinted is the glass? Appears to have a lighter tint
@Jman-eg9zp its definitely a lighter tint then their other cases for sure. You can see the components within the case with all glass on it with the system off which is nice
@PidgyPCs for sure, as long as there is some tint im happy
I was wondering if you had any video of the titan RX AIO cooler connection video?
@rmorenberg what do you mean by cooler connection? I know I have a RUclips Short unboxing the cooler 🙂
@@PidgyPCs the H150 series with the q series fans has all the connections on the radiator it looks like with the titan RX aio it has the connectors on the pump again did I miss see that?
@rmorenberg so the AIO comes with a LINK hub like the triple pack of fans.
How were the temps?
@@mrshadowfire temps are good. Hasnt overheated yet
How loud (or quiet) would you say the system is at idle?
Its very silent to be fair
que bonito🤩
@@nicopol7770 thank you!!
I bought this case last weekend and did a case transfer from a Be Quiet Pure Base 500DX because it couldn't fit the anti-sag bracket that came with my 4080 super. I also used corsair's shift PSU as this case is compatible with that range of PSUs
Very nice!! What do you think of the case?
how you like it after be quiet?
is it less sound proof?
I am a beginner, shouldn't a cooler system with a radiator combo bring cool air in? Instead of being used as an exhaust?
An AIO can be ran either way. This just makes tube routing easier
That config is actually Corsair's recommendation.
I just bought this case recently and am new to pc building and stuff and am wondering if I need a corsair rgb hub to set up my case fans or can hook them directly to the motherboard
If you bought the version of the case that came with the fans, there is a hub in the back of the case for the fans that are included. That hub plugs into the motherboard via USB 2.0
@ oh I don’t believe mine came with one 😕
@ should I go for a refund, like is the hub a case specific or should I just get a new one
@@jackterry5726 The hub isnt case specific. If its LINK, they are sold separately. Its a small black square box
@ oh ok I see a piece that says link so I assume it needs that thank you for the help
I want to buy this cabinet, do I need a motherboard with a 4-pin RGB head? or 3 pin? Can I use coolers other than the RX120? thank you
So the case itself doesnt have an RGB strip on it so any motherboard will work as long as it matches with the RGB you want too. As far as coolers go, yes. You can add any cooler you like that will fit within the case 😁
@@PidgyPCs Yes, I plan to buy the model that comes with the 3 RS120 coolers, but I understand that I need to buy a controller, since my motherboard only has 2 argb connectors, is that correct? greetings from Argentina
@@energy2000ist greetings!! So the case with the 3 RS120 fans comes with the LINK hub on the back. It uses a USB 2.0 header to control and a PCIe cable to power the hub. If you plan on using them, you will need iCUE to control all the RGB and fan controls. It wont plug into an RGB header on your motherboard
@@PidgyPCs I thought it was only the icue link model, it is the one with the hub on the back, when you talk about ICUE it is the software, right?
thank you very much for your help and time
I have a question, how those two intake fans are working above psu, isn't it blocking the intake?
So yeah, the fan on the left sits directly above the PSU so there is really only an inch of air being pulled through that fan, the other though is open as the PSU doesnt go that far. The air is pulled from the bottom vent of the case and through the cables
@@PidgyPCsthank you really appreciate your reply to my confusion, though I'm planning to buy it and I really don't wanna spend more on buying those other 4 fans as it only comes with only 3 , and since the one you put is pretty expensive do i have any else choice which is great but also costs less?
So I am pretty sure you can get the 3500x without the fans. This way you can get 6 fans that all match. If that doesnt work, Corsair makes LL fans that are cheaper but would require a different hub. The only other way to do is to get the LINK RX AIO as it would come with 3 fans so there are a total of 6 matching
@@PidgyPCs ok sirr, thank you so much i liked your content.. I'll make sure to subscribe and recommend it to my friends 👍🏻
Really appreciate it!! 🙌
Bro I got the corsair case 3500
And I got all my parts they are different to yours I am going to give it a try , do I need a screwdriver and screws that’s it
Good luck with the build! Yes, screwdriver is needed. Screws come with the case 😁
@@PidgyPCs thanks bro going to get a screwdriver from my families house later
love corsair , but damn, why still no reverse fan !
Right?! Lets hope they come out with something!
Looking good! Can you let me know how high the Corsair Titan CPU cooler is? With the standard cap if possible. Thanks. :)
Thank you!!
No problem, do you want it measured from the motherboard or just from the base of the cooler to the top of the cap?
@@PidgyPCs Nice thanks man. Can you measure from the motherboard till the highest point, with and withour the cap?
For example I now have a NZXT X63 which is 55mm according to the specs, but 60mm from the motherboard. Space is a bit tight here in the Dan Case C4 with sandwhich fan setup on the X63. Want to know if that will fit.
@@dennisvanderwal6226 No problem! I will check that out tonight!
@@dennisvanderwal6226 alright, VRM attachment 3 1/4" and regular cover 3"
Many thanks sir! 🎉
where can i buy the rx360 cooler??
Currently not availble yet, but soon it will be
Will RGB sync nicely with non icue fan ?
As long as the plug-in for iCUE works for your motherboard, otherwise you have to run the separate RGB software for your motherboard RGB as well.
atx mobo fit in that case right?
It does yes
@@PidgyPCs wow thanks for the reply !!!
@@luismi8195 No problem at all! 😁
Is 850W enough for this setup? Isn't 1000W better?
@eXtrem1s 850w is plenty. In fact you can run a 4080 Super PC on a 850w PSU. Its when you start running a 4090 that you should think about a 1000w PSU
I use a 750watt with my rtx 4070tisuper and works fine
3:32 Bruh not okay man!
LOL well, we all drop them....
@@PidgyPCs I have done a lot worse trust me lol. I have killed PC hardware in shameful ways.
I recently purchased Intel Setup.CPU Motherboard It would randomly crash on me. So I returned the motherboard and CPU and went AMD.No more crashes.
As long as your happy with the build and it does what it needs to, thats what matters
How tall is
506mm