DIY - 11000mAh Mobile Power Bank 5V 2.4A / QC | Multiple Mobile Charger | POWER GEN
HTML-код
- Опубликовано: 5 сен 2024
- This video shows how to make a 11000mAh mobile power bank 5v 2.4A/QC using a 5v boost module board and 18650 3.7v Li-ion battery
buy 5v 2.4A QC Mobile Power Boost Module - amzn.to/45dCF3q
Battery controller circuits Video - goo.gl/YVHokC
More details and circuits - bit.ly/45bV9RG
-----------------------------------------------------------------------------------------------------------------------
Click the link to see more videos on the playlist
1)Monitoring & controlling project circuits - goo.gl/UUT2CG
2) Inverter circuits - goo.gl/xz33Uu
3) Chaser LED lights circuits - goo.gl/5aRnU4
4) DC Power supply circuits - goo.gl/yt4fuP
5) Remote control circuit - goo.gl/rJzx1d
6) LED-based circuits - goo.gl/pga5qh
7) Relay-based circuit - goo.gl/Q4r7XM
8) PIC Microcontroller project - goo.gl/9tNaVm
9) Relay-based circuit - goo.gl/J4u8BD
10) Battery controller circuits - goo.gl/YVHokC
11) Repair works - goo.gl/11uPxn
12)Transformerless power supply circuits - goo.gl/c9zv
13) solar System - bit.ly/2m0g4q6
14) Audio System - bit.ly/34ZSlYt
-----------------------------------------------------------------
buy more material by following a link
4S 16.8v BMS Li-ion battery charger board
Banggood - bit.ly/36ohkWD
Amazon - amzn.to/2QlsjdI
18650 Li-ion 3.7v battery
banggood - www.banggood.i...
Amazon - amzn.to/2XQsMWC
TP4056 Li-ion Battery Charging with Protection Board
Banggoog - www.banggood.i...
Amazon - amzn.to/2YL6bvz
DC-DC 12-35V 150W Boost Adjust Module -
banggood - www.banggood.i...
amazon - amzn.to/31DGcYb
3S 20A Li-ion Battery 18650 Charger PCB BMS Protection Board 12.6V Cell -
Banggood - goo.gl/7jfnBM
Amazon - goo.gl/uy6YwM
LM2596 dc-dc buck converter step down module =
Amazon - goo.gl/pxH5AR
Banggood - goo.gl/eg6WSn
MINI DC 0-32V 3-Digital LED Display Volt Meter
Banggoog - www.banggood.i...
Amazon - amzn.to/2P6vR12
Solar LED Wall light
Banggood - www.banggood.i...
Amazon - goo.gl/48Kxnb
MT3608 2A dc-dc Step Up Boost Power Module =
Amazon - goo.gl/c4Ys6P
Banggood - goo.gl/pKbCHe
----------------------------------------------------------------------
Sorry for the correction, the 2200mah is not the "active capacity" that can be used. It usually provides only around 75% of its capacity, because the module is limiting the low voltage of the battery.
So the paralel group of 5 pcs 2200mah, if the modul states the low voltage is about 3.2V, the active capacity is around 75%x11000mah=8250mah.
The active capacity will be reduced, if the module states the low voltage is around 3,6V. I have done the experiment about it.
how to know if the module states low voltage?
@6GDC maybe u should use more thick wires
Cuz I was also facing this issue then I replaced wires and now it's working awesome
@It is finished I had a similar issue, but discovered it was due to voltage loss across the wires connecting to the battery. I switched to heavy guage wire and the proper Nickle strips with tack welding... this stabilized the low voltage cut off which was being affected by wire temperature etc. But overall I still don't like the module as its extremely inefficient. My 15 Ah pack (6 cells) only actually delivers a measured 9 Ah at the USB output due to heat losses in the DC-DC converter.. even when 0% on the module = 3.2v ... furthermore the later versions of the module have an insanely bright LED display and overcharges to 4.28 Volts which will eventually shorten the battery life. ... you get what you pay for !!!
@@quadplay2591 I've tested the cutt-off voltage on this module, Its 3.6v. Doesn't let the batteries discharge below it. its like 40% of batteries are going unused.
@@explucto и не заряжаются батареи выше 4 вольт,это тоже недобор по питанию
Wonderfull explaination 👍👍👍
Help me fix my power module why the lcd monitor have low lights and when connected to battery is showing 00 percent?
Having same problem here
@@LyLeap полное гавно 4 акумулятора заряжает двое суток.
Módule problem? Battery Low?
i can see, this Module can charge mobile fast, but please tell me how much time did it took to charge all Lithium batteries to 100% ?
Please reply sir...
Very good nice video ❤❤❤❤❤
I’ve used that board before, it says it’s quick charge, but each port only outputs 1.6 amps
What is the maximum charging current (not output current) for this module??
2A enough because of excuses amount of current is demage the module
Very nice
Как в плате поменять предел использования акумулятора?
Сейчас 3.6-4.1В.
Нужно 2.7-4.3 В
Какие резисторы нужно поменять?
Cool project bro. Putting this on a decent enclosure might be a good idea also.
yes, I will make an enclosure
@@powergen522 Hello. could you tell me. I bought such a board, but it does not charge my one plus 6 with fast charging. Can you tell me which board to order so that it charges my one plus 6 quickly?
What is the name of that tape used and where can i find it pls
Can we charge and discharge simultaneously?? Brother
Good , well...👍
Una pregunta, es normal que cuando la batería está en 0% figure un solo carácter o tienen que aparecer los dos caracteres ( 00% )
Thanks for the info. How many battery can connect to this charging board ?
you can connect how much you want
Четыре зарежает почти сутки не может зарядить.
Can i add more battery?
Lighting input
What is the total battery output voltage?
I mean how many volts can the circuit handle from the battery?
I waited a lot for my module after 99% but it didn't become 100%. Should i wait long?
Super bro.. I also made it It is working
Hi. I hace a question. Only support 18650 1200mAh batteris? Or i Can use 11865 batteries 3200mAh each?
Hello. could you tell me. I bought such a board, but it does not charge my one plus 6 with fast charging. Can you tell me which board to order so that it charges my one plus 6 quickly?
Smoke came from circuit while accidently joint revers polarity for 3 second.its working but it is traced that the black component which is right of LED 7 segment display ,is burnt .what is that component .in some circuit ,it has different pins.mine has only two big legs both side of components.i guess it is diode or MOSFET.csn anyone tell what it is ,and what is it's alternate to replace if this component is not available in the market.it is charging but percentage shows not true ,it stuck at 90 or 97,98 not complete 100
Super 💥
Pero que paso con el micro ipad is for charg or not?
With this module we can make powerbank with lipo battery?
i want to recharge 2*3.7v series battery pack. please guide me.
estou com uma dúvida, as baterias são colocadas em série, ou paralelo??
Подключаются параллельно
That doesn’t support Quick charge 3.0?
How about circuit got heat when charging a mobile..
hiya i have just bought 1 of these my energizer 20000mah power bank short circuted and i have loads of single usb modules cos i make mini power banks wnd other stuff but i can never get these up and running dont no why j always blow them up cos i try 2 hard its kindov charging ive tried attaching a 500msh battry and even my 20000mah and it charges a phone for like 3 seconds rhen goes off its not certwin times it goes off do u no ehy his is plz...i am stuvk
I have a question, I want to make a power bank, so I am interested in what is the minimum current voltage for this Battery controller to recognize the 18650 battery?
You only need 1 18650
Good Job!!!
But I do think that you should use 2600 mah cells and use 8 cell in parallel this will ultimately increase the backup of the power bank
Can we use 5000mah cell?
@@techhacks6166 yes
@@techhacks6166 5000 mah cells doesn't exists , they are fake
How about making a super fast power bank?
But brother if i connect any of these usb ports its doesn't show the fast charging indication on my phone display which shows when i connect with my ac adaptor
The board he used isn't compatible with the quick charge technology
@@GamerDeMeia yes it doesnt support qc
I used the same power bank board with 4 batteries. But the module is not charging any devices. It detects and charger for a few seconds and stops charging. Would you know what could be causing it?
May be board is demaged
@@powergen522 Thank you for the response ji 🙏
I using 9 batteries in parallel
No problem occurs it perfectly works 3 year
Needs a double row of cell to be real world outdoors away home power to last and tgghen indoors over same time as your charging power bank charge via it your phone or tablet going take 10 hour or little less at 2amps
can i use 3.2v battery ? . becoz i have only 3.2v battery
Can I charge 2600 mah x 8 batteries with this module ?? Please reply to me
Maine maker bazar se same charging module mangaya h
Wo fake lithium battery ko charge krta h
Aur usse koi output nhi aa rha sab kuchh try kiya plz help
But my working bro
My also cut off after sometimes
How are the cells balanced?
you don't need that in parallel.
Where can i find the circuit board from?
hey hi i am made this powerbank with this same module but I use lithium polymer battery(4.4v 6000mah) i face a problem that when i charge my mobile that is realme 8 it just charge for few seconds and then the module display blink and the percentage come to zero. when i try with redmi 10 it just charge for few minutes and then automatically it stop charging. but whe n i charge my smart watch or tws is working fine
भाई सेम दिक्कत मेरे साथ थी फिर मैने एक व्यक्ति से पूछा तो उसने बताया कि आउटपुट के लिए 5v चाहिए लेकिन अपनी बैटरी सिर्फ 3.7v निकलती है
Se puede con baterías de celular
What is the lighting jack
Why aren't you balancing the cells?
Please halp me ye kha se khrida kitne ka khrida
Hlo my 2.4 a power bank modiul is showing out light and mobile is not chargin 😭
Supperb 🎉
Power Bank module battery input Mah supported
20000Mah recommend
ilang oras bago ma full charge?
Thank you so much for video
Please share circuit for 1Amph output
Did you check charge and dishacarge same time feature ? Is it possible ?
Yes
I have made the powerbank with this same module with a new one but when I connect my redmi 9 power it shows charging for few seconds but then it turns off but other mobiles or things are charging great. Please reply. What's the solution.
First you change the data cable or power bank cable
@@powergen522 everything is new. And I have taken my friends cable and phone still too the problem is occuring.. Do it occurs in your mobile?what is the name of your mobile?
My too same problem.
I connect 4000 ambatter and 6000 am battery but not charging to mobile
Well, at least I didn't go down without explaining myself first
itu real capacity om? udah di test apa kapasotas database?
Почему вы считаете,что ваша музыка всем нравится,засуньте ее себе пожалуйста,сами знаете куда
I will reduce it gradually
No bms board needed?
Not when you are connecting batteries in parallel.
Bro it's fast charge the battery..
Or charge as normal like 1.5A
Does it support fast charge battery itself..
Please bro reply please
it is normal charger power bank max 2A output get in
It shows fast charging, but it charges only with ~1.4A. Not bad, but not the best
@@milankaloczi4547This module doesn't support quick charge, only normal charge. 5V-2.4A doesn't mean quick charge.
For quick charge the voltage should be more than 5V.
realme ke mobile charge karne par 2 mint me hi power bank band ho jata hai aor koi normal mo lagao to chalta kya kiyo aisa
Use good wires ( ghar ke board wale )
Sir 1 kam karo. 20 000 mah ki battery se 4000 mobile kitni bar vharge hoga. Test karake batao. Please
Why did you put the planet's voice?
Why your powerbank draining fast
I have made power bank by same module but as soon as i connect my samsung a 20s mobile for charging , it shows charging for few seconds but again it automatic cut off charging ... why it is so ? Whereas battery is fully charged , mobile is not fully charged
may be converter module board problem
why mine is only upto 98% charge only and not able to reach 100% charge?
Solder your wires properly and remove and reinstall battery , mine was also stucking at 99
What amp output in qc port?
Is that curcuit can bear 18650 4.2v batteries,plz plz pl reply meee plz
Yup
184 / 5.000
The module is garbage.
battery charging current 500-800ma
The charging current for 1 battery should be 1A.
When you insert 5 batteries into this module, it will charge with 500-800ma. i.e. 100-120ma per battery. It charges in 30 hours now
Thank you for the video. How do I add an on/off switch?
@6GDC ok, thanks for telling your personal experience
भाई साहब हमारा पावर बैंक ओपन
करने के बाद बंद क्यों हो रहा है
Pleaee tell me how much 5v amp recommended to charge it
This power module is waste. My phone not charging, but power bank module showing 100% but not charging and after few minutes 00% showing, i maked this type ( 9:03 )
This module shuts off when it has 40% or something! is therer any solution for that?
Is battery percentage accurate
yes
@@powergen522 okay
Amazing.
Power bank slaw charge😅😅😅😅
Pa link sa circuit board sir. Please
Up to how many 18650 batteries can you use that?
10000mAh to 15000mAh batteries enough,
Because of the above 15Ah batteries demage the module
@@powergen522
In parallel 50k mah u can add also..
Make sure battery voltage not exceed 3.7v
You mean we can add more battery's ? Up to ??
I can’t watch your video because of the music. Try rock and roll.
Can I add six batteries?
using the module shown on the video you can use only one cell. This is bullshit what he did. You must control the voltage on each cell separately...
Vi prich
Ghatiya se ghatiya product bulbul app par aate Hain mangwane per
2.4A output my ass
Bulbul sabse bekar app online
Can you please give it to me as giveaway
Какой КПД