For those who are confused on what to do after 25. Keep numbering the points another round. So 0 is 52 (which you connect to 26) 1 is 53, 2 is 54 (which connects to 27) …go on until you go around the whole circle. Then you’ll have enough points to double all the numbers.
Very beautiful work - great job! PS But not a spirograph, as spirographs generate roulette curves (which are created by a wheel rolling inside a bigger wheel)
i understand i start at 1 (1x2 = 2) so i draw the line from 1 to 2, then i start on 2 (2x2 = 4) so i draw the line from 2 to 4, but what happens when i get to number 25 of 30 what number do i go to then? ... i would appreciate your help
if you divide your circle into 60 equal parts; you will get 60 dots from 1 to 60. Your 61st dot will be the same as your 1st dot, your 62nd dot = 2nd dot etc... To know where is your next dot you just need to divide it by 60 and your remainder will be your dot. E.g my next dot is 128, I divide it by 60 and i get 8 as a remainder so my 128th dot = 8th dot.
Love how simple this is, however what do you do when you get around to the other side? Like 26x2 isn't 0... Please help. I am going to use this as a reference in my next giant spiral design and I'm stuck at this... I'm going very very small. 2 inch circles 18 times around...
Sorry I don’t sure that I understand your question, but I can say if make changes on the cm, you will get a different result, and its equals also how much points you will add to the circle.. a ratio between the points cm and the diameter has to be careful for creating cardioid..
if you divide your circle into 60 equal parts; you will get 60 dots from 1 to 60. Your 61st dot will be the same as your 1st dot, your 62nd dot = 2nd dot etc... To know where is your next dot you just need to divide it by 60 and your remainder will be your dot. E.g my next dot is 128, I divide it by 60 and i get 8 as a remainder so my 128th dot = 8th dot.
For those who are confused on what to do after 25. Keep numbering the points another round. So 0 is 52 (which you connect to 26) 1 is 53, 2 is 54 (which connects to 27) …go on until you go around the whole circle. Then you’ll have enough points to double all the numbers.
You are really good at geometric designs 😃😊😄
Thank you for the great feedback 😊👍
Very beautiful work - great job!
PS But not a spirograph, as spirographs generate roulette curves (which are created by a wheel rolling inside a bigger wheel)
Good very nice
Thank you
i understand i start at 1 (1x2 = 2) so i draw the line from 1 to 2, then i start on 2 (2x2 = 4) so i draw the line from 2 to 4, but what happens when i get to number 25 of 30 what number do i go to then? ... i would appreciate your help
if you divide your circle into 60 equal parts; you will get 60 dots from 1 to 60. Your 61st dot will be the same as your 1st dot, your 62nd dot = 2nd dot etc...
To know where is your next dot you just need to divide it by 60 and your remainder will be your dot.
E.g my next dot is 128, I divide it by 60 and i get 8 as a remainder so my 128th dot = 8th dot.
Love how simple this is, however what do you do when you get around to the other side? Like 26x2 isn't 0... Please help. I am going to use this as a reference in my next giant spiral design and I'm stuck at this... I'm going very very small. 2 inch circles 18 times around...
Sorry I don’t sure that I understand your question, but I can say if make changes on the cm, you will get a different result, and its equals also how much points you will add to the circle.. a ratio between the points cm and the diameter has to be careful for creating cardioid..
if you divide your circle into 60 equal parts; you will get 60 dots from 1 to 60. Your 61st dot will be the same as your 1st dot, your 62nd dot = 2nd dot etc...
To know where is your next dot you just need to divide it by 60 and your remainder will be your dot.
E.g my next dot is 128, I divide it by 60 and i get 8 as a remainder so my 128th dot = 8th dot.
Nice.
Would it change if I did 2cm points?
Yes it will, if you want to change it for 2cm points you need to create a bigger circle..
I See Arts Thank you
No problem.. good luck 👍
From where you purchase a rounder
Does it have to be a circle of 17 cm
יפה מאוד. טוב להיסתקל , תודה😊
תודה לך
joli mais j ai pas compris les dimensions dans les tracés
Nice
Wou
Sir super sir
Thank you.But l don't draw it number 26.
AKA the Jedi symbol
Love it. I looks like a butt. LOL
no im david
@@glottalstop2080 No you're not. That drawing is wonderful. I have to try to do it.
@@dtriniboss no my name is david. its mine
Youh
So simple I do by
Not look video
Enna paar
Or just use programming :P