@@ScrollsofSombra no, it really isn't. I just find Robert's videos waaaaay more entertaining than other car reviews that aren't bad at all. That's how much I like Aging Wheels
I envy him for that. I can smell an open bottle of sulphates gear oil or atf at 5 paces and if I dump a trans pan on myself I might as well burn whatever I was wearing bc it's like cat piss, once it gets on clothes it never completely leaves
It's the little things. The vacuum's hose getting caught behind a corner. A shopping bag that just won't stay open. That bus that never showed up. I Stepped in dog poop.
@@FroggyMosh yeah happens more often then people like it to but that life one minute your on top of the world the next you stepped in dog poop and your like eww gross that's just great lol
No not really I mean I could watch Tavarish but I want to see cars get done so... And Hoovies he's a funny guy but a bit too rich for my bottom crust blood
I mean my truck is a single cab and it has latch points. Nicley covered to protect it from catching bungee cords from us. It's a daily ish driver, it's used to pick up wood, drive around town sometimes, move trash, and move bikes.
I always thought those loops were meant to secure cargo you put in the rear of the cab when you fold the rear seats up. That or a loose umbrella holder. :3
I'm not going to lie. I didn't learn anything in this video that would be useful to me. That being said, I regret nothing! It was still really entertaining and informative... about performing repairs on a type of truck I don't own. 🤣
But if someone you know owns a Ford (I don’t freely admit that) and they through a piece of scrap metal through the rear glass then you know where to send them. Also applies to stinky oil spills in the backseat too.
@@atkinsondp I was just going to say that we watch him rebuild crappy cars that nobody else wants, including us 😂 Obviously we're all watching because Robert kicks ass.
I appreciate your commitment to a correct-looking repair. When I was a kid, my father smashed the back window out of his pickup in the process of chucking in a load of firewood, and his repair plan was to buy a piece of plexiglas at the hardware store, cut it to roughly the right shape freehand with a jigsaw, and glue it in with about 85 tubes of clear bathtub caulk. (For added value, that truck's rear window _did_ have a sliding panel, and he'd only broken that panel and the fixed piece on the driver's side, so the plexiglas only filled in where those two bits had been. The part on the passenger side was still the original glass. :)
Don't forget that not everyone has the luxury of being able to order replacement parts (and/or get them delivered). I lost the trunk cover for my hatchback, I found salvage places in the US that would sell me one for $20 if I could come over to pick it up, but here in Europe it would cost me over €200 (excluding shipping!) to get one. Not saying that applied to your dad, but sometimes a jank fix is still a fix, and keeping the wind out is more important than making an old truck look good
@@daylen577 I don't think finding a window for a 1980 Dodge pickup would have been that hard in 1985, I think my old man was just being a cheapskate. But I'm not saying being a cheapskate isn't a valid stance! :)
85 tubes of caulk Reminds me of some quote from Robert, i forgot the video but he had said something like he had used "all of the caulk in the observable universe"
When my father got his new truck, he gave the old one to my uncle, who used it to cut wood in the back forest. It took him less than a WEEK to do EXACTLY this. Threw some wood into the back, it bounced, and hit JUST the right spot, at JUST the right angle to completely shatter the back window completely.
I mean I'd be scared too, but listen my mom has a story for how she hurt her back, she slipped a disc or two bending over to pick up a toy I threw from the stroller
"... which now smells like a baby duck after an oil spill." Hahahaa!! FYI- Liberal amount of alcohol in the dish soap when the seats were soaking would have helped a lot.
Look I would have just taken the whole thing and shut them in the washing machine and not just any washing machine no no my grandma's new glossy metallic candy blue Samsung Smart washer is a no-go... So off to the Chinese laundromat to blow up their drums.
Robert I think it’s time you realize that what you do is less important then you just doing. Personally speaking I would watch you do almost any menial task because your funny, I like your editing and I in my small way want to support you on this endeavor of your tube. You just keep being you and we all keep watching. Deal ?
I once had a 5L bottle of oil leak in the boot of my car, it went absolutely everywhere and was dripping out the bottom of the car. Had to buy a complete new boot liner and parts from a breakers yard. On the plus side it has never rusted.....
A mate had a mk1 Ford Fiesta back in the day. It had a completely knackered rocker cover gasket and it dribbled oil down the end of the block and onto the back of a spinning pulley REALLY badly. Because he thought it would cost more than what the car was worth to fix it he just kept adding about a pint of oil every 50ish miles. I found out about it after he'd been doing this for over 6 months ! It only took me a couple of hours (and a gasket kit that was less than the cost of the oil he'd used for his previous 100 or so miles of driving) to fix. He kept that car for about another 6 or 7 years, and in that time I welded several patches along the left hand side of it, but all the splattered oil had stopped the right hand side floor's rust dead in it's tracks.
I once broke the back window on my dad's old Tacoma when throwing firewood into the bed, so been there, done that. I also chipped my cousin's truck's back window throwing rocks into the bed. Maybe I should stop throwing things into trucks..
My dad has a story, one of his friends had a truck on a construction site, they were running a couple chains to a dozer to pull it out because someone got it stick, it lost the hook and it came flying back and decapitated the truck driver. So a few lessons learned, one, do t be dumb and have something to protect the rear window and your head if your doing that, and have something to help catch it like a pulley it runs through so if it snaps it comes flying back and catches on the pulley and parts flying from it if any get caught on the headache rack.
1) Great video about something simple 2) That's a lot of editing you did for this video.. greatly appreciated! 3) Better things to watch you say, well I have fallen down the rabbit hole of these Vtubers, but I never miss an episode of Aging Wheels... This channel is a real gem!
@@alliejr Europe has top tethers too, usually located on the back of the rear seats. Top tethers aren't used in all car seats, just those that don't have a 'foot' that braces against the footwell.
9:17 actually, it *is* chewing gum. Nowadays most consists of food grade butyl rubber. That's why it's also good for plugging a leak in a pinch :) at least according to AvE.
This just has to be my new best mechanic channel. Learning AND having a laugh is just pure gold🥸😎 Thanks for sharing this and definitely keep up the good work👌👍
"I may be covered in cat hair, but I still smell good" - Thundercat 0:42 "I may be covered in cat hair, but my truck still smells funny" - Aging Wheels
Great video! The content doesn't always have to be rare or different. I find it relaxing to watch people fix things. Whatever things need fixing. Just my two cents. Keep it up!
Auto glass is one of those things that every time I think about doing it myself, and I price the parts, it turns out the pros are usually the same price or cheaper! The glass usually costs as much as they charge for the glass AND the install! I just had a windshield done the other day for $150 out the door!
Replaced windshield in my 2005 Mercury Montego back in 2015 for about that much or less. I was surprised. In and out of the shop in about 35 minutes tops.
Stumbled onto this because I have that same F150. Really hoping I never have to go through this, but I'm glad you did for me. Absolutely love going through the backlog of videos on the more obscure cars you own. Your wit, mechanical skill, and perseverance in the face of engineered annoyances are delightful. Thank you!
I've spilled new and used diff oil, antifreeze, chainsaw bar oil, engine oil among other oils. I've grown use to the smell but on sunny warm days I've got to leave the windows open or the smell would knock you out 😂
I dont have a car, infact i dont own anything able to transport me around at all. I have no clue about cars or similar either, dont really need the infomation at all. But the things you say while doing stuff is entire reason i watch your video's for years :)
We naturally ignore "background" smells, probably because it makes new scents easier to detect. Therefore, do NOT trust your own nose to see if that smell is gone. You need a second opinion.
I love your self deprecating humor mixed with your real world descriptive analogies, like "smells like a baby duck after an oil spill". It's pretty good comedy. I loved the dog poop segment too. keep it coming.
I use a few bungee straps on the front hooks of my bed across it to keep stuff from flying forward, I've had a lot on it and ones going to the back hooks to keep an old dishwasher back.
Love your videos, Love your humor, and your editing. I like that you include your errors in your videos. They're a way to help people learn what not to do, or how to do it right...albeit at your expense. You have a good humor about them when they do happen to. Please keep up the great work.
Not sure how many times others have said this, but you're actually safer with no gloves at all when working with acetone than with those nitrile ones. It will penetrate right through the glove and have more contact time with your skin since it can't gas off as easily as it would barehanded. Neoprene or latex are a much better choice in the future. It might not be a bad idea to print off a glove chemical resistance chart for the garage so you can know what to wear when.
If you ever have to do another set of seat covers. First hit up a farm supply for the new hog rings. And spray glue the foam and put a layer of cling wrap on them. It makes the covers slide on like butter.
You used this truck to trailer the famous crispy Ferrari from RUclipsr to RUclipsr... I swear I just love the car community. All our favorite channels merge together so regularly and I love it!
Dunn, your video looks good, won't you back that glass up You'se a fine chicken raiser, won't you back that glass up Call me Your subscriber when you back that glass up Bob, who is you playin wit? Back that glass up
I really like your sound montages, when you have a lot of screwing or hammering to do and arrange the video clips so that there is a beat or even some melody. Love the attention to detail!
If Mr. Aging Wheels uses this solution for cleaning his clothes... Maybe there is a reason people in an enclosed space (like a car) with him smell something funny...
After a truly aweful day this video was the first thing that really brightened my mood. Thanks for the great content and for always getting me motivated to do more.
Impressive that you can take something as mundane as changing a window and washing a seat and make it interesting. I also find it cool how the seat covers are completely removable. I expected them to be stitched up and not clip-on/velcro dealies. This video also offered a lot of insight into why newer cars are so much less comfortable than older cars. The base of all these seats is just solid metal. Take apart an old car seat and all the framework (aside from the very outer edges) is entirely made up of nice springs.
I appreciate the video, on my 2005 SuperCrew the back window is leaking and I've got to remove the seat and unbolt that window and I've never seen a thorough video on how to do it so thank you
I re-did the upholstery in my own truck using good quality medium-sized zip ties instead of hog rings. It's lasted 3 years now with no signs of fatigue or broken ties.
I used to put in these plastic and padding-covered interior panels into cars at the assembly line. They either went in perfectly smoothly or you had to futz around with the tabs endlessly to get them to allign properly. There was no inbetween.
Seeing him handling the glass-windows, reminds me on my youth. I was working in a small steel-construction shop, The boss had one or two guys "moon-lightning" for him. He had a friend (I'll call him Mike) who came often to the shop. This guy was a Car-Mechanic, with a license to own or operate his own shop, but worked for the High-Way repair shop as the Manager of the service crew. One day 1972 or 1973 a customer car was brought to this small shop by him that needed the front-window replaced. The Older folks may know that in those days, the rubber holding the window in place was first put on the glass, (if one thinks of the letter *H* one can get the idea, on the top came the glass on the bottom would be the sheet-metal of the car-frame. First one would put the top "H"-RUBBER on the glass, and the bottom one thin string, and crossing it at one place making sure it stays, then put the glass into the frame from the outside in the car. It was a Job needed at least 3 persons to do. And if anybody wants to know the make and model of the car: *Vauxhall Viva* good loking car at least for me... My Boss and another guy held the Window in place on the outside, while Mike was on the inside, pulling the string so that the H-rubber would slip over the sheet-metal and secure the window in place. Took only a few minutes (or so I thought) and the job was done. Mike went outside to take a look, and on the passenger side, on the bottom was the window not correct. Mike went around the passenger side, explained that the window *would just need a **_small_** tap* and then it fits. Standing besides the car, facing the rear, with his right hand, he hit the bottom corner of the window, and his had went right through it, shattering the window in the process. To this day, I can not forget the look on his face, as he was one guy who gave people the impression he is sooo great, and gave me all the time some stupid lines how dumb and stoopid I was, that he knows soo much and never makes any mistake. Yeah one guy over 40 years comparing himself to a 17 year teenager.... Sorry for the long story....
You should watch Rob from Car Salvage UK - He pressure washes the most disgusting car / van seats and leaves them in the sun to dry. They come out like new! Great channel.
Oh man, that smell. I spilled a half bottle of gear oil in my truck after a clutch job. Hoping you have better luck getting it de-smelled. I also blew out a windshield trying to fit a piece of 8/4 maple in my Forester that was about a half inch too long. It was resting on the dash and as I closed the back hatch it jammed against the windshield and cracked it from the inside. :(
FYI, the guide pins for the headrest (the ones you hammered out) they are a one time use part. Also your suppose to use a screw driver and push in on the tab on them thats on one side and just slid them out.
Well Rob I’ll always give you something Mate you have a real gift for making the most mundane job both interesting and entertaining. Great job loving your work. 👍🏻👍🏻👍🏻
Many years ago, due to my lazy habit of throwing stuff in the rear footwell after going to the parts store, I managed to spill a bottle of transmission oil over the rear carpet. After mopping up all I could it still stank so I removed the carpets. I eventually found that pressure washing it forced the oil out, my pressure washer had a tank which you put shampoo in so I put dish soap in it. After a small foam catastrophe I rinsed it off with clean water and most of the staining was gone. I think the pressure definitely helped.
Use an extractor on that carpet. Spray it with stain remover, scrub it in, and use a carpet extractor to clean it like the car detailers do. Heck, I do that on my car twice a year and I don't keep it that dirty or spill diff oil in the seats.
The loops are for the Upper LATCH buckle on a child seat. You run the strap through the loop, turn 90degrees to the middle, then connect the LATCH buckle on the middle.
On one trip back from the supermarket I had a loose trolley jack in the boot (Trunk) of my car that slam into my shopping bags while cornering. it punctured the sides of 4 cans in a 24 pack of larger, and they sprayed their contents EVERYWHERE in there ! It was soaked into the carpet, splattered up the plastic sides, the carpet on the back of the rear seats, and even got into the felt like material on the underside of the parcel shelf. A lot of it also ran underneath the false floor, got all over the spare wheel, and sloshed about enough to pretty much coat every bit of exposed metal under there. 4 cans may not sound much, but they were pint cans, so it's still around 2 litres of frothy fluid getting sprayed about ! Until I'd stripped out every piece of trim from the back of that car, JET WASHED it all, then scrubbed everything I couldn't remove, I'd see friends get in my car, then start sniffing the air, and look at me as if to gauge if I might be (As the smell indicated) pissed as a newt ! :D Even a couple years later, on hot days I'd still catch a faint smell of stale larger when getting into that car. :)
I just had to clean my rear seats after a bottle of motor oil leaked into it and also used dish soap - twice - because the stain didn't seem to go away. Very annoying because you have to wait for it to dry in between washes to see if it actually worked. I only remembered you making a video about the same thing afterwards. Comforting to know that you had the same issue. I also just put them back in.
A friend told me that the loops are anti-tip loops that hold a child's car seat back into position so that in an accident the car seat doesn't fly forward.
"Don't you guys have something better to watch?"
Eh, not really.
Neither do I.
Same
It was this or do work.
Euh...yep, but watching you wrestling with the backseats...is way more funny 🤣🤣🤣
@@The-Rectifier that sounds a little..... if you read it out of context
"Don't mind me. I'm just struggling." should be a shirt.
It's a huge mood and I really would wear it a lot
This is, at the very least, a hilarious answer to "what should I wear today on camera?" Like easily justifiable as a one-off!
i would 100% wear that as a shirt, and as someone who does all the seat work at a dealer i can feel that pain.
“Deploy the glowing stick”
Should also
Agreed.
Mr. Dünn, I would rather watch you washing seat covers than see other youtubers do car reviews. Your banter is excellent. Keep em coming!
Is that a jab on DeMuro?
@@ScrollsofSombra I'm not sure I mind
@@ScrollsofSombra Yeah, and I seriously agree.
Also he’s used the words “quirks and features” to the point where it isn’t funny anymore.
@@ScrollsofSombra no, it really isn't. I just find Robert's videos waaaaay more entertaining than other car reviews that aren't bad at all. That's how much I like Aging Wheels
"It don't stink no more!" Says the person that couldn't smell it before either.
Yeah that smell is permanent now. Lucky for him he can't smell it, cause that smell is awful
yeah can we get an independent review on that part :D
I envy him for that. I can smell an open bottle of sulphates gear oil or atf at 5 paces and if I dump a trans pan on myself I might as well burn whatever I was wearing bc it's like cat piss, once it gets on clothes it never completely leaves
@@bashkillswitch to me atf never smelled bad, gear oil? yes bad
marine grease? don’t even get me started on that smell
"Don't mind me, I'm just struggling"
Aren't we all 😌
I stepped in dog poop I loved that one
It's the little things.
The vacuum's hose getting caught behind a corner. A shopping bag that just won't stay open. That bus that never showed up.
I Stepped in dog poop.
@@FroggyMosh yeah happens more often then people like it to but that life one minute your on top of the world the next you stepped in dog poop and your like eww gross that's just great lol
"Don't you guys have something better to watch?"
Checks Under Dunn - No new content
"Nope"
This!
No not really I mean I could watch Tavarish but I want to see cars get done so...
And Hoovies he's a funny guy but a bit too rich for my bottom crust blood
I was just agreeing that Under Dunn (his other channel) is the only place we're likely to find "better"
The loops in the back panel are a fist generation attempt for child safety seats to be held against the back of the seat during impact.
I mean my truck is a single cab and it has latch points. Nicley covered to protect it from catching bungee cords from us. It's a daily ish driver, it's used to pick up wood, drive around town sometimes, move trash, and move bikes.
@@malice6081
The difference is that your single cab seat tilts forward to access those anchors.
I always thought those loops were meant to secure cargo you put in the rear of the cab when you fold the rear seats up. That or a loose umbrella holder. :3
I was wondering if those were top anchors for car seats. Weird, the ones in my 02 Saturn are metal and much sturdier.
We should clarify, forward facing child safety seats. Those loops are still in use in a 2021 f250...it's a rather terrible design.
Rust-proof your seat frame with this one weird trick!
Coating the underside of a car with trans/diff oil isn't actually rare, and it's very effective against rust.
@@Rosteripulla I did that with engine oil when my oil filter had a hole in it
"Do you think Tavarish is done with that Ferrari yet?"
No ~ I don't think he'll ever be done.
just like the buss
I'm not going to lie. I didn't learn anything in this video that would be useful to me. That being said, I regret nothing! It was still really entertaining and informative... about performing repairs on a type of truck I don't own. 🤣
I also noted the steering wheel was on the wrong side for me 🤣
But if someone you know owns a Ford (I don’t freely admit that) and they through a piece of scrap metal through the rear glass then you know where to send them. Also applies to stinky oil spills in the backseat too.
I learnt that you can remove the covers off car seats.
Totally true. Replacing trabant engines is far more practical
@@atkinsondp I was just going to say that we watch him rebuild crappy cars that nobody else wants, including us 😂
Obviously we're all watching because Robert kicks ass.
I appreciate your commitment to a correct-looking repair. When I was a kid, my father smashed the back window out of his pickup in the process of chucking in a load of firewood, and his repair plan was to buy a piece of plexiglas at the hardware store, cut it to roughly the right shape freehand with a jigsaw, and glue it in with about 85 tubes of clear bathtub caulk. (For added value, that truck's rear window _did_ have a sliding panel, and he'd only broken that panel and the fixed piece on the driver's side, so the plexiglas only filled in where those two bits had been. The part on the passenger side was still the original glass. :)
Don't forget that not everyone has the luxury of being able to order replacement parts (and/or get them delivered). I lost the trunk cover for my hatchback, I found salvage places in the US that would sell me one for $20 if I could come over to pick it up, but here in Europe it would cost me over €200 (excluding shipping!) to get one.
Not saying that applied to your dad, but sometimes a jank fix is still a fix, and keeping the wind out is more important than making an old truck look good
@@daylen577 I don't think finding a window for a 1980 Dodge pickup would have been that hard in 1985, I think my old man was just being a cheapskate. But I'm not saying being a cheapskate isn't a valid stance! :)
85 tubes of caulk
Reminds me of some quote from Robert, i forgot the video but he had said something like he had used "all of the caulk in the observable universe"
That's what i did. I had a beater 30 year old pickup and the plexiglass and glue was $20 and back window was $30. So plexiglass it was.
When my father got his new truck, he gave the old one to my uncle, who used it to cut wood in the back forest. It took him less than a WEEK to do EXACTLY this. Threw some wood into the back, it bounced, and hit JUST the right spot, at JUST the right angle to completely shatter the back window completely.
Damn ford with their bouncy beds
The only part of the title RUclips decided should be in the notification for me was "I broke my back..." And I was terrified for a second.
I mean I'd be scared too, but listen my mom has a story for how she hurt her back, she slipped a disc or two bending over to pick up a toy I threw from the stroller
Sames
"... which now smells like a baby duck after an oil spill." Hahahaa!! FYI- Liberal amount of alcohol in the dish soap when the seats were soaking would have helped a lot.
bio laundry detergent also works well
So… whiskey? Gin?
@@sivalon1 Vodka--the scent's not as strong. :P
Look I would have just taken the whole thing and shut them in the washing machine and not just any washing machine no no my grandma's new glossy metallic candy blue Samsung Smart washer is a no-go... So off to the Chinese laundromat to blow up their drums.
Would have used tetra-chloro ethylene, myself. (AKA "perc" or dry cleaning fluid; it's also the active ingredient in RED Brakleen.)
"you think tavarish is done with that yet?!" - the burn! 🤣🤣
@@tspawn35 he'll get to it eventually, but think he's spreading himself too thin, always looking for that next project..
I literally lol'd 😂😂
Double Burn!
A burned Ferrari burn!
You think Tavarish is done with any project yet?
Robert I think it’s time you realize that what you do is less important then you just doing. Personally speaking I would watch you do almost any menial task because your funny, I like your editing and I in my small way want to support you on this endeavor of your tube. You just keep being you and we all keep watching. Deal ?
"Don't mind me, I'm just struggling" should be on a T-Shirt
I'd buy that T-shirt in a heartbeat!
Indeed, it has a certain depth to it.
It's an entire mood for some of us.
I must say, I very much appreciated the buildup and delivery to the dog-poop line
I once had a 5L bottle of oil leak in the boot of my car, it went absolutely everywhere and was dripping out the bottom of the car. Had to buy a complete new boot liner and parts from a breakers yard. On the plus side it has never rusted.....
A mate had a mk1 Ford Fiesta back in the day. It had a completely knackered rocker cover gasket and it dribbled oil down the end of the block and onto the back of a spinning pulley REALLY badly. Because he thought it would cost more than what the car was worth to fix it he just kept adding about a pint of oil every 50ish miles. I found out about it after he'd been doing this for over 6 months !
It only took me a couple of hours (and a gasket kit that was less than the cost of the oil he'd used for his previous 100 or so miles of driving) to fix. He kept that car for about another 6 or 7 years, and in that time I welded several patches along the left hand side of it, but all the splattered oil had stopped the right hand side floor's rust dead in it's tracks.
@@Reman1975 haha that’s almost like a 2 stroke. Constantly filling up oil.
"Oh my god, the things that are supposed to be easy just aren't."
mood.
There's another t shirt idea, lol
Mr. Dunn, I'm glad I'm not the only one with an extra pair of shoes sitting in the back seat of my daily driver.
My dad also does... Except it's behind the front seat cuz it's a 2 seated
His last name is Dunn?
I keep a complete change of cloths in my car.
@@the8-bitbaby967 at least that's what I've been told
@@nevoyu always a good idea.
I once broke the back window on my dad's old Tacoma when throwing firewood into the bed, so been there, done that. I also chipped my cousin's truck's back window throwing rocks into the bed. Maybe I should stop throwing things into trucks..
Quite possibly the first time in the history of man that someone has said "Thank you Ford" while working on a FoMoCo product
I've never said that.
I say it whenever I do an oil change on my Fusion. Filters on top, no digging around in a crowded engine bay needed.
I already told him in my comment that FORD'S ARE GARBAGE!!!!!!!!!
No, dumb is my roommate. He did the same thing 3 times before he bought a headache rack to protect it.
My dad has a story, one of his friends had a truck on a construction site, they were running a couple chains to a dozer to pull it out because someone got it stick, it lost the hook and it came flying back and decapitated the truck driver. So a few lessons learned, one, do t be dumb and have something to protect the rear window and your head if your doing that, and have something to help catch it like a pulley it runs through so if it snaps it comes flying back and catches on the pulley and parts flying from it if any get caught on the headache rack.
Probably explains why any county or city truck i work on has a headache rack in them, and to also support thier lightbar.
"It smells like a baby duck after an oil spill." Bahahaha! I spit out my coffee.
I watch for the wit, that's it.
1) Great video about something simple
2) That's a lot of editing you did for this video.. greatly appreciated!
3) Better things to watch you say, well I have fallen down the rabbit hole of these Vtubers, but I never miss an episode of Aging Wheels... This channel is a real gem!
The loops might be for the child safety tethers
That's what I thought as well when Robert said they were only attached to the body, that they're the upper attachments to secure child seats.
@rogue In Europe? Yes. In America? No. We have top tethers as well.
@@alliejr Europe has top tethers too, usually located on the back of the rear seats. Top tethers aren't used in all car seats, just those that don't have a 'foot' that braces against the footwell.
“I’m covered in cat hair.”
One of my cats was in my lap getting brushed when that part played.
join me I'm covered in cat hair 🤣🤣🤣🤣🤣🤣
9:17 actually, it *is* chewing gum. Nowadays most consists of food grade butyl rubber. That's why it's also good for plugging a leak in a pinch :) at least according to AvE.
"I'm covered in cat hair" I felt that
"Don't you guys have something better to watch?"
Depends, when are we getting more of The Bus? ;)
This just has to be my new best mechanic channel. Learning AND having a laugh is just pure gold🥸😎
Thanks for sharing this and definitely keep up the good work👌👍
Your time-crunching edit style is by far my favorite out of the dozen or so 'fixin stuff' channels that I watch, just want you to know that!
those loops at around 3:30 are for attaching child car seats
On the contrary, this was one of my favorite videos yet. I have never seen car repair that's so SATISFYING when you cut between every action
I love how the robin reliant heckles you whenever it's in shot. Has strong opinions on the smell of spilt oil in this video...
It's Reliant Robin. You just said something like Hilux Toyota. Sorry just a pet peeve. What you said was funny :)
@@ABrit-bt6ce Whoops. Yes, bit of dyslexia there.
"I may be covered in cat hair, but I still smell good" - Thundercat
0:42 "I may be covered in cat hair, but my truck still smells funny" - Aging Wheels
Your frustration is so palpable. This is the most realistic car-tinkering video I've ever seen.
I learnt so much from this video ... thank you.
Things I learnt...
Dont smash a window...
Dont spill differential oil on the seats ....
Thank you ...
Great video! The content doesn't always have to be rare or different. I find it relaxing to watch people fix things. Whatever things need fixing. Just my two cents. Keep it up!
Auto glass is one of those things that every time I think about doing it myself, and I price the parts, it turns out the pros are usually the same price or cheaper! The glass usually costs as much as they charge for the glass AND the install! I just had a windshield done the other day for $150 out the door!
Replaced windshield in my 2005 Mercury Montego back in 2015 for about that much or less. I was surprised. In and out of the shop in about 35 minutes tops.
"Smells like a baby duck after an oil spill" was the absolute best Dunn-one-liner yet.
Stumbled onto this because I have that same F150. Really hoping I never have to go through this, but I'm glad you did for me. Absolutely love going through the backlog of videos on the more obscure cars you own. Your wit, mechanical skill, and perseverance in the face of engineered annoyances are delightful. Thank you!
I've spilled new and used diff oil, antifreeze, chainsaw bar oil, engine oil among other oils. I've grown use to the smell but on sunny warm days I've got to leave the windows open or the smell would knock you out 😂
I dont have a car, infact i dont own anything able to transport me around at all.
I have no clue about cars or similar either, dont really need the infomation at all.
But the things you say while doing stuff is entire reason i watch your video's for years :)
We naturally ignore "background" smells, probably because it makes new scents easier to detect. Therefore, do NOT trust your own nose to see if that smell is gone. You need a second opinion.
I love your self deprecating humor mixed with your real world descriptive analogies, like "smells like a baby duck after an oil spill". It's pretty good comedy. I loved the dog poop segment too. keep it coming.
The loops are there for you to hold when youre standing on the bed. Bit of a design flaw that you need a shattered window for that.
This is one of my greatest fears when hauling a 4 wheeler in the bed of my truck
I use a few bungee straps on the front hooks of my bed across it to keep stuff from flying forward, I've had a lot on it and ones going to the back hooks to keep an old dishwasher back.
Most entertaining video to date! I stopped and watched the seat removal three times, keep up the good work!!!
Love your videos, Love your humor, and your editing. I like that you include your errors in your videos. They're a way to help people learn what not to do, or how to do it right...albeit at your expense. You have a good humor about them when they do happen to. Please keep up the great work.
Not sure how many times others have said this, but you're actually safer with no gloves at all when working with acetone than with those nitrile ones. It will penetrate right through the glove and have more contact time with your skin since it can't gas off as easily as it would barehanded. Neoprene or latex are a much better choice in the future. It might not be a bad idea to print off a glove chemical resistance chart for the garage so you can know what to wear when.
If you ever have to do another set of seat covers. First hit up a farm supply for the new hog rings. And spray glue the foam and put a layer of cling wrap on them. It makes the covers slide on like butter.
I admire the smiles throughout, what a job.
You used this truck to trailer the famous crispy Ferrari from RUclipsr to RUclipsr... I swear I just love the car community. All our favorite channels merge together so regularly and I love it!
I found this a very soothing and relaxing video. Your hands probably think otherwise after battling with those seat covers :)
Dunn, your video looks good, won't you back that glass up
You'se a fine chicken raiser, won't you back that glass up
Call me Your subscriber when you back that glass up
Bob, who is you playin wit? Back that glass up
E
"smells like a baby duck after and oil spill." 🤣🤣🤣🤣
I really like your sound montages, when you have a lot of screwing or hammering to do and arrange the video clips so that there is a beat or even some melody. Love the attention to detail!
"I know this isn't the most interesting video." You kidding? This is the most entertaining car repair channel ever!
This video is like the visual equivalent of ASMR, nothing better than watching someone do something that's satisfying
If only there was a machine for washing various pieces of cloth, like seat covers... And one did not need to use dish soap in a plastic bucket...
Then the wife is mad because that Machine smells like diff oil
If Mr. Aging Wheels uses this solution for cleaning his clothes... Maybe there is a reason people in an enclosed space (like a car) with him smell something funny...
I can’t believe how much I enjoyed watching you repair and clean your truck. 😂
After a truly aweful day this video was the first thing that really brightened my mood. Thanks for the great content and for always getting me motivated to do more.
Impressive that you can take something as mundane as changing a window and washing a seat and make it interesting.
I also find it cool how the seat covers are completely removable. I expected them to be stitched up and not clip-on/velcro dealies.
This video also offered a lot of insight into why newer cars are so much less comfortable than older cars. The base of all these seats is just solid metal. Take apart an old car seat and all the framework (aside from the very outer edges) is entirely made up of nice springs.
I too am covered with cat hair. I feel that sir, in my soul. Loving the content, keep up the good work!
You did a VGG "heayeah---tsshh" when removing the seat and I appreciate it.
Zip ties work fine, used them when I had to re-stitch my seat together. It's been fine for a couple years now.
I appreciate the video, on my 2005 SuperCrew the back window is leaking and I've got to remove the seat and unbolt that window and I've never seen a thorough video on how to do it so thank you
I re-did the upholstery in my own truck using good quality medium-sized zip ties instead of hog rings. It's lasted 3 years now with no signs of fatigue or broken ties.
We need Smell-O-Vision so we can check the end result.
I've used zip ties instead of hog rings when I added heated seat elements to a vehicle. Had no issues with it that way.
Props to you for being willing to just completely disassemble stuff. Seems like every time I try to do that, I always break something beyond repair.
This is the kind of quality content I subscribed for 😂
That dog poop joke is a work of genius lol
"Smelling like a baby duck after an oil spill". With a whiff of acetone. Your rear passengers will be thrilled!
Great vid.
I used to put in these plastic and padding-covered interior panels into cars at the assembly line. They either went in perfectly smoothly or you had to futz around with the tabs endlessly to get them to allign properly. There was no inbetween.
Seeing him handling the glass-windows, reminds me on my youth.
I was working in a small steel-construction shop, The boss had one or two guys "moon-lightning" for him. He had a friend (I'll call him Mike) who came often to the shop. This guy was a Car-Mechanic, with a license to own or operate his own shop, but worked for the High-Way repair shop as the Manager of the service crew.
One day 1972 or 1973 a customer car was brought to this small shop by him that needed the front-window replaced. The Older folks may know that in those days, the rubber holding the window in place was first put on the glass, (if one thinks of the letter *H* one can get the idea, on the top came the glass on the bottom would be the sheet-metal of the car-frame. First one would put the top "H"-RUBBER on the glass, and the bottom one thin string, and crossing it at one place making sure it stays, then put the glass into the frame from the outside in the car. It was a Job needed at least 3 persons to do. And if anybody wants to know the make and model of the car: *Vauxhall Viva* good loking car at least for me...
My Boss and another guy held the Window in place on the outside, while Mike was on the inside, pulling the string so that the H-rubber would slip over the sheet-metal and secure the window in place. Took only a few minutes (or so I thought) and the job was done. Mike went outside to take a look, and on the passenger side, on the bottom was the window not correct. Mike went around the passenger side, explained that the window *would just need a **_small_** tap* and then it fits. Standing besides the car, facing the rear, with his right hand, he hit the bottom corner of the window, and his had went right through it, shattering the window in the process.
To this day, I can not forget the look on his face, as he was one guy who gave people the impression he is sooo great, and gave me all the time some stupid lines how dumb and stoopid I was, that he knows soo much and never makes any mistake. Yeah one guy over 40 years comparing himself to a 17 year teenager....
Sorry for the long story....
I'm here for the humor! Any additional content is just a pleasant bonus!
You should watch Rob from Car Salvage UK - He pressure washes the most disgusting car / van seats and leaves them in the sun to dry. They come out like new! Great channel.
Oh man, that smell. I spilled a half bottle of gear oil in my truck after a clutch job. Hoping you have better luck getting it de-smelled. I also blew out a windshield trying to fit a piece of 8/4 maple in my Forester that was about a half inch too long. It was resting on the dash and as I closed the back hatch it jammed against the windshield and cracked it from the inside. :(
FYI, the guide pins for the headrest (the ones you hammered out) they are a one time use part. Also your suppose to use a screw driver and push in on the tab on them thats on one side and just slid them out.
Well Rob I’ll always give you something Mate you have a real gift for making the most mundane job both interesting and entertaining. Great job loving your work. 👍🏻👍🏻👍🏻
This is my favourite channel. I'm always watching out for new stuff from Aging Wheels. Can't wait for more content soon. 😄
Many years ago, due to my lazy habit of throwing stuff in the rear footwell after going to the parts store, I managed to spill a bottle of transmission oil over the rear carpet. After mopping up all I could it still stank so I removed the carpets. I eventually found that pressure washing it forced the oil out, my pressure washer had a tank which you put shampoo in so I put dish soap in it. After a small foam catastrophe I rinsed it off with clean water and most of the staining was gone. I think the pressure definitely helped.
"It maden't a lick of difference". That's going to be part of my vocabulary forever.
Man does thing competently. Nice work, Rob!
Use an extractor on that carpet. Spray it with stain remover, scrub it in, and use a carpet extractor to clean it like the car detailers do. Heck, I do that on my car twice a year and I don't keep it that dirty or spill diff oil in the seats.
Those christmas tree plugs that hold the headliner on are a PAIN. Source: I have a 2007 F150 regular cab
The loops are for the Upper LATCH buckle on a child seat. You run the strap through the loop, turn 90degrees to the middle, then connect the LATCH buckle on the middle.
Well Done , you are the only one that could make that content interesting. you are a genius. that's why I always watch whatever you put out .
On one trip back from the supermarket I had a loose trolley jack in the boot (Trunk) of my car that slam into my shopping bags while cornering. it punctured the sides of 4 cans in a 24 pack of larger, and they sprayed their contents EVERYWHERE in there ! It was soaked into the carpet, splattered up the plastic sides, the carpet on the back of the rear seats, and even got into the felt like material on the underside of the parcel shelf. A lot of it also ran underneath the false floor, got all over the spare wheel, and sloshed about enough to pretty much coat every bit of exposed metal under there.
4 cans may not sound much, but they were pint cans, so it's still around 2 litres of frothy fluid getting sprayed about !
Until I'd stripped out every piece of trim from the back of that car, JET WASHED it all, then scrubbed everything I couldn't remove, I'd see friends get in my car, then start sniffing the air, and look at me as if to gauge if I might be (As the smell indicated) pissed as a newt ! :D
Even a couple years later, on hot days I'd still catch a faint smell of stale larger when getting into that car. :)
I actually really liked this one. Was nice having a break from sponsored videos as well
I just had to clean my rear seats after a bottle of motor oil leaked into it and also used dish soap - twice - because the stain didn't seem to go away. Very annoying because you have to wait for it to dry in between washes to see if it actually worked. I only remembered you making a video about the same thing afterwards. Comforting to know that you had the same issue.
I also just put them back in.
3:26 I believe that those loops are for child seating, or for attachment points if you want to carry something in the backseat maybe?
Love the editing work
"didn't mean to add that." No, but I am so glad that you did!
Those loops above the back or your rear seat are the old-school attachment points for the older child seats back in the day.
A friend told me that the loops are anti-tip loops that hold a child's car seat back into position so that in an accident the car seat doesn't fly forward.
We need a video on the electric zero turn. Very much in the market and need an honest review lol