Just installed one. I’ve been building vescs for almost 2 years now. This kit was amazing. It is truly plug and play and I believe that almost anyone can do it. The he board rides so much better and safer, and this controller has a lot of room to upgrade parts down the road. Headlights are great, and the pre loaded software is amazing. I didn’t even open the vesc app before ridding. I just installed the kit and turned it on. I’m very satisfied quality of the kit as well.
I think I'm more excited about making my boards work again, than I was originally getting the first one. Thank you Tony for your work,, keeping this awesome platform alive.
Tony, we absolutely need more videos from this channel to keep the VESC community inspired and informed about all the incredible work you're doing for the sport. Your dedication and innovation are truly game-changing, and I have no doubt you'll continue to make waves despite challenges like Past Motion’s attempts to monopolize the market and restrict customers. There's plenty of room for everyone to grow and innovate, and your contributions make a huge difference. Here in the USA, we fully support you and Floatwheel. Keep pushing boundaries-we can’t wait to see more of your amazing content! And yes, VPNs work wonders! 💪
BRAVO TONY!!!! This is amazing! I'll take 2 kits! If you get bored now that there are drop in kits for everything, wireless remote start "anti-theft" key fobs should be next on your list. I had to uninstall mine since I lost the fob while doing yard work... 😢
finally some way to fix them, the only reason i did not get me one is that you can't fix them, and futuremotion does everything to prevent it, its good to know the community and other corps do somethings aboutit.
Definitely getting one to wake up my XR that's been gathering dust since I got the AdV pro. Hopefully this kit allows us to monitor charging rate with an ETA to full charge. On that note what apps connect to the kit? If we want to put our own tunes in can we? I prefer to upgrade my battery at the same time. Please post options bonus the advantages of each.
if you have the w rails just do a 'setup imu' 'orientation' and put your board on flat position and save the offset. just make sure you read the instructions in the vesc tool.
Any chance of ever getting a smart charge/discharge BMS for the XR like you've got on the ADV2? Personally I could manage battery cells, but it's harder to recommend to others without discharge protection...
Ok, I know that the JW and CB batteries will work with the kit, now my question is with a custom battery how is the highest voltage that I can use with the XRV kit?
Thanks for this video Tony. I am having an issue. My kit installs fine and powers on. However, when I get to the point where I plug in the charger to test if the board will charge before reassembly the light on the charger stays green. It turned red when all the FM hardware is installed. The charge plug is plugged into the new connector and the charge harness is plugged into the BMS. What could be wrong?
@@22BadApple Nope. Everything else works, just can't charge the board😓 Haven't been able to get a hold of Tony/Floatwheel either. I'm going to do some more testing tonight and I'll let you know if I find a solution.
no, not really - I personally prefer to work with empty batteries in case I fat-finger something but I won't go out of my way to first discharge the battery
Does this work even if the firmware has been updated? And does the firmware update affect one's ability to vesc an xr? Or just battery swap or what? I am struggling to find these answers.
7:47 what size screws are those? My parts board I bought for my XRV kit is missing those, I was able to order the hex head ones but couldn't find any onewheel parts stores selling the phillips head ones.
Its the crypto thing thats holding me back from getting this. I just dont want to go through the hassel of figuring that out and all that crap just to buy it. Cant stand FM for their bs
@@Smoshylife so 63v and I know you can get a 84 or 80 v battery, but that’s not the point, he says it’s gonna compare to a gts but it won’t at all so I just wanna let people know it’s more a gt
Thank you Tony. Because of you & the Vesc community you are pushing FM to be a more competitive company.
Just installed one. I’ve been building vescs for almost 2 years now. This kit was amazing. It is truly plug and play and I believe that almost anyone can do it. The he board rides so much better and safer, and this controller has a lot of room to upgrade parts down the road. Headlights are great, and the pre loaded software is amazing. I didn’t even open the vesc app before ridding. I just installed the kit and turned it on. I’m very satisfied quality of the kit as well.
What software version came installed on it? Did you update it?
Back from the dead the XRs will be alive again❤
I think I'm more excited about making my boards work again, than I was originally getting the first one. Thank you Tony for your work,, keeping this awesome platform alive.
Tony, we absolutely need more videos from this channel to keep the VESC community inspired and informed about all the incredible work you're doing for the sport. Your dedication and innovation are truly game-changing, and I have no doubt you'll continue to make waves despite challenges like Past Motion’s attempts to monopolize the market and restrict customers. There's plenty of room for everyone to grow and innovate, and your contributions make a huge difference.
Here in the USA, we fully support you and Floatwheel. Keep pushing boundaries-we can’t wait to see more of your amazing content! And yes, VPNs work wonders! 💪
Amazing feat of engineering! These XR are going to be beasts!
BRAVO TONY!!!! This is amazing! I'll take 2 kits!
If you get bored now that there are drop in kits for everything, wireless remote start "anti-theft" key fobs should be next on your list. I had to uninstall mine since I lost the fob while doing yard work... 😢
can you make a video on how to do this:
add 80ml of ATF fluid into your hub.
finally some way to fix them, the only reason i did not get me one is that you can't fix them, and futuremotion does everything to prevent it, its good to know the community and other corps do somethings aboutit.
I sold my Gt once I heard the Xr kits were in. Excited to try it out!
Well done Tony, doing incredible work!
great to see an all in one plug and play solution for the XR! I'm running these kinds of set up for my trick boards.
great video. tony, thanks for all your hard work and including the xr's. now we just need the how to video on how to use crypto to make purchase.
This is awesome Tony I have a old xr plus that's isnin need of an upgrade. So Happy 😊
Love my XRV kit!!!! Thanks tony!
First on the line as usual. Good stuff Tony!
Definitely getting one to wake up my XR that's been gathering dust since I got the AdV pro. Hopefully this kit allows us to monitor charging rate with an ETA to full charge. On that note what apps connect to the kit? If we want to put our own tunes in can we?
I prefer to upgrade my battery at the same time. Please post options bonus the advantages of each.
Great videos... I'm looking forward to my XRV rebuild. 💪💪
Thanks for a great video. Can't wait for mine to get here.
Great work Tony!
When will we get to see the ADV2 in action?
Thanks Tony!
Is it possible to add a status lightbar like gt or pint?
So after it’s all done you can connect to the vesc app and customize things to your liking?
💯
Don't suppose you're working on a battery for the XR?
There are so many XR box battery options on the market already I doubt it's worth their time. Gotta focus on the ADV2 launch!
@@quinnfoster1234 where can I buy one in europe? Thanks
@@quinnfoster1234 yep currently all focus on the adv2 production, gotta make sure we over deliver instead of making people really wait that long.
Doing god’s work protecting us from evil corp.
You are the Future of one wheel Motion 🫶
What if you have w rails or a cbxr? Will there be a guide on how to set those up?
if you have the w rails just do a 'setup imu' 'orientation' and put your board on flat position and save the offset. just make sure you read the instructions in the vesc tool.
very excited to get one of these after i save up
I have an Owie chip installed in my board for the Cbxr. Do I need to remove the chip or can I leave it in with the XRV?
you wil need to remove the owie and the old bms for this to work becasue the comm wires have been reused as the charging cable.
Where do you get the XRV kits?
Tony I’ve heard the Fungineers Funwheel is better to ride than the Floatwheel. Is it true?
Any chance of ever getting a smart charge/discharge BMS for the XR like you've got on the ADV2? Personally I could manage battery cells, but it's harder to recommend to others without discharge protection...
Waiting for that ADV BMS upgrade kit video to drop.
for those running a CBXR, is there enough space left in the battery box to install the Bms in the kit?
Can you do a video showing and after performance. Or just a video testing it out ❤
Can someone describe in depth what this will do to my pint S if I install one of these kits please? Thank you!!
is the antenna connection secure enough for vibration? trying to see if anything needs to done to help make it more secure.
If I have a onewheel + with a bad bms can I use this kit to convert my + to an XRV by just adding a XR battery?
Keep killing it Tony!
Ok, I know that the JW and CB batteries will work with the kit, now my question is with a custom battery how is the highest voltage that I can use with the XRV kit?
Will or is there an option to buy the xrv or pintv bms for my current vesc pint build?
Use heat when removing the lid from the controller. Do not use crazy force
Hey Toni, can I add it also to an older OneWheel Plus?! I think I need add also an XR Battery if I do this drop in kit.
Tony please please create also a Floatwheel trick board like the XR🤞 A Floatwheel growler! 😬
Thanks for this video Tony. I am having an issue. My kit installs fine and powers on. However, when I get to the point where I plug in the charger to test if the board will charge before reassembly the light on the charger stays green. It turned red when all the FM hardware is installed. The charge plug is plugged into the new connector and the charge harness is plugged into the BMS. What could be wrong?
Same here. Did you find a fix?
@@22BadApple Nope. Everything else works, just can't charge the board😓 Haven't been able to get a hold of Tony/Floatwheel either. I'm going to do some more testing tonight and I'll let you know if I find a solution.
Please do! Hope you find a solution.
@@22BadApple FYI, just heard back from Tony and they are going to send me a new BMS
Great work Tony! Will your spares be available without crypto one day?
Until Future Motion lets up with the “patent infringement” claims, FM is got payment processors to deny Floatwheel transactions. Why do you ask btw?
Someone needs to explain to me how to use crypto 🦕
There are a few videos on here. It really is quite simple.
Be aware of scammers
Can i pair this kit with a 18s2p battery on a torquebox?
With a different BMS and some wiring changes sure.
Are there options to use other batteries, other than the OEM battery? Thank you Tony and Co.
yep cbxr and other battery that works with the oem bms will work with xrv kit.
@@floatwheel Thank you.
does it matter whether my battery is full or empty when changing the bms?
no, not really - I personally prefer to work with empty batteries in case I fat-finger something but I won't go out of my way to first discharge the battery
Hey Tony, will this XRV kit work with the JWXR battery pack?
yep!
Ferry Ridges
McCullough Crossing
Hey Tony! Is this kit compatible with the CBXR battery?
yep
Will the XRV kit work on an XR with over 5000 miles? Or does it have to be pretty much brand new or untouched?
as long as your motor, battery and connectors are in good shape, the kit (new controller, BMS & lights) should work
Yes, the controller will not "overwork" your battery.
An XR that's been converted to VESC has been called a VEXR for years it's not called an XRV unless it's a floatwheel kit.
Does this work even if the firmware has been updated? And does the firmware update affect one's ability to vesc an xr? Or just battery swap or what? I am struggling to find these answers.
dude this will work,you change brain of your onewheel(controller)
Will this work with the V1 Onewheel and the Onewheel +? (Not xR)
no :)
@@kelniEYL Why not?
Did you not watch the vid? He literally scraped all the hardware out except for the battery
Wooo! 🙌
GTS power out of an XR? So it can go 30+mph now? How is that possible?
That’s what I’m saying. I’m calling bs. Gotta have the 84v upgrade which isn’t compatible with his bms I think
Power does not equal speed.
@FloatinCanada thanks. GTS torque at low speeds, then?
@@thewheelneil1379 yes, that's the right way to put it. For speed you do need higher voltage, at least 84V to safely match GTS speeds
7:47 what size screws are those? My parts board I bought for my XRV kit is missing those, I was able to order the hex head ones but couldn't find any onewheel parts stores selling the phillips head ones.
I think unc 4-40. I converted all mine to metric m3.
Nina Expressway
Lockman Estate
Brielle Loop
How to i find the gtv kit install? Dumb RUclips doesn't let me acces Tony's page 😡
You'll need a VPN
Dare Gardens
Note to self: Remember to attach antenna before putting the whole fucking board together.
Does anyone have a busted XR I can buy from them?
Its the crypto thing thats holding me back from getting this. I just dont want to go through the hassel of figuring that out and all that crap just to buy it. Cant stand FM for their bs
I'm guessing that it's still ok to use VnR ?
100% ok
Same performance level to the gt*
He says the pint gets to GT level and XR gets GTS on his site
@@Smoshylife I have a vesc xr and it’s still nothing like a gt. I love his idea but it’s absolutely nothing like a gts
@@Joseph_shredz what kinda battery you running?
@@Smoshylife cbxr
@@Smoshylife so 63v and I know you can get a 84 or 80 v battery, but that’s not the point, he says it’s gonna compare to a gts but it won’t at all so I just wanna let people know it’s more a gt
Jazmyn Port
Stracke Port
First