How To Unclog A Pool Skimmer
HTML-код
- Опубликовано: 13 янв 2022
- Shop Vac Plates - bit.ly/3FAAKIv
Shop Leaf Canisters - bit.ly/3fxg6hL
In this video, we discuss how to unclog a pool skimmer line. The common cause of a clogged skimmer is vacuuming leaves and debris directly into the skimmer line. A leaf canister or vac plate on the skimmer basket is always recommended when vacuuming the pool.
SUBSCRIBE for FREE swimming pool care and maintenance videos
every week: bit.ly/SubscribeINYO ****
VISIT our blog for weekly swimming pool tips, tricks, and more! bit.ly/InyoBlog
SHOP at our online store! bit.ly/InyoPools
LIKE us on FACEBOOK! / inyopools
FOLLOW us on TWITTER! / inyopools
FOLLOW us on INSTAGRAM! / inyopools
Thanks, for the video, very informative. However, I have a question. As you mention, I do have a vacuum connected to the hole in the skimmer (where the skimmer basket is) and there is another whole that is closed. Although the vacuum runs just fine, when I put stabilizer in the skimmer, it does not get sucked in. In this case should I try to blow out water from the pump line how you showed it and should I remove the vacuum hose before I do that?
Is there a stronger method I believe one of those small wiffle balls for like practice golfing got stuck in the line from the skimmer
Thanks!!!
You bet!
💗 thank you!!!!
You are so welcome!
I have a clog skimmer in my inground pool and i was trying to do this but as soon as i take the lid off from the pump alot of water starts coming out its this normal i maked sure valves were shut and pump was off but water still was coming out
Did u ever get it fixed? I’m having same issues now. Don’t want to spend more money fixing lol
For five years my skimmer sucked in leaves then it quit I got a new pump keep the water level perfect in the middle it’s swirls going down sucking hard but least we’ll just go right by it without getting sucked in I have change the Jets pointing in different direction in every way I could think of but the lonely leafs just go right by it
My bladder doesnt empty when I shut it off. That scares me it takes too long .
My problem is no water circulation. My water is very green now. I just bought the bladder. Should I lubricate it before I use it so it doesn’t get stuck like another commenters
Its supposed to get stuck, that's how it works. To unstick it just turn the water off.
I tried this on a slow suction line. The bladder got stuck! I thought it was friction and pulled the hose out of the bladder. Now I have a bigger problem!
Yeah.... thats why they say to do it from the pump side..... you won't push the clog deeper, you try to work it back out the way it came in, and as you found out, you don't run the risk of getting it sucked in. MAYBE try getting another bladder (or the towel and hose) and go from the other end to see if you can force the bladder back out now too. GOOD LUCK!
Instructions unclear, penis stuck in suction line. 🤣
I did that today.. but \i had teh vacum on backwash... does that not lead the debris on the exiting tube onto the street.. and not clog the skimmer line^ I think \i clogged the backwash pipe...could that be
Ive seen the pros use co2 tanks to blow out the lines
If you have a CO₂ tank or two laying around, then that is definitely an option.
I have water coming from my skimmer but not alot will this keep my pump from priming...new pump new filter housing and gaskets new plumbing pipes from pump to sand filter...
You'll know if you're not getting enough water from the skimmer if the pump doesn't fully prime. The water in the pump strainer should be full. Is the skimmer the only source of water for the pump? Do you have a main drain that you can open up to get more water?
I dont have a main drain valve only a pipe from the skimmer under ground to the filter housing...the problem didnt start till the end of last summer when my pump locked up...ive replaced the pump motor..filter housing and gaskets..and all plumbing pipes from filter housing to sand filter...water is full in the housing and when you turn pump on water goes out but doesnt fill back up
There could be several reasons why your pump won't prime. I'll post a few links to videos about priming a pump. Hopefully, one of them will address your issue.
How To Prime A Pool Pump - ruclips.net/video/cLwpXo9kNTA/видео.html
How to Troubleshoot a Pool Pump That is Not Fully Priming - ruclips.net/video/pkrVtTOyVYQ/видео.html
How to Identify and Correct Low Water Pressure - ruclips.net/video/mAb2abgwbk8/видео.html
Pool Pump Not Priming: Filter Related - ruclips.net/video/1ukphKcGbzk/видео.html
How to Diagnose and Repair Low Pump Pressure - ruclips.net/video/erdX2AeWvgg/видео.html
@@mikel.4885I'm having the same exact problem with my pool this summer. Did you fix the problem? If so, what caused it and how did you fix it? Any advice would be greatly appreciated
@hartung692 yes I did it ended up being a rock in the pipe at the pool skimmer box
This does not work