How to fix error code 9 on electric bike?

Поделиться
HTML-код
  • Опубликовано: 8 дек 2024

Комментарии • 29

  • @CHEAPSKATE
    @CHEAPSKATE 2 месяца назад

    this video actually did help me a ton. the motor kept cutting out sporadically after just 2 hours of owning the bike. after fighting with support to figure out what was going on so early, this video taught me that the trouble was the large wire that connects the motor to the battery was loose

    • @CHEAPSKATE
      @CHEAPSKATE 2 месяца назад

      update: nevermind, problem persists

  • @PaulYatesphotographer
    @PaulYatesphotographer 2 года назад +2

    Just excellent. I have a different bike, Colt 604 that has died on hills (ie more stress and energy on the motor) and no explanation as to why. What you explained shows exactly the problem on my bike. My service dealer has no clue about this at all. I was there today, and he didn't check this at all. Said there were no diagnostics available, which is untrue. Basic diagnostics to be sure, but it explained the problem using your instructions. Thank you! My motor is definitely the problem.

    • @revibikes
      @revibikes  2 года назад

      Glad it helps. Well, it dig it deeper, when you found it's the motor portion issue, it still can be the motor itself or the motor cable that connecting conntroller and motor. Anything in the route can cause the same presentation.

  • @OurAbandonedWorld
    @OurAbandonedWorld 4 месяца назад

    got a Jorvik odin with the c300 computer, error 9. Will this be the same as 9 still shows when motor disconnected

    • @revibikes
      @revibikes  4 месяца назад

      Yes it's the same on all ebikes with "communication error". In your situation, it can be the motor cable, motor connector, or the motor itself. (everything in between the controller and motor)

  • @JDA-zg9ug
    @JDA-zg9ug 2 года назад +1

    The red triangle is showing up. My bike will not throttle or pedal assist at all. I literally just pulled into my yard and it appeared and stopped working. It shows the throttle engaging on the screen but won't move it even jerks like it wants to move but immediately stops itself. I hear a noise in the back like it wants to move or turn over but it won't budge.

    • @revibikes
      @revibikes  2 года назад +1

      Can you please check the specific error code information and send email to our support team support@revibikes.com? Our people will walk you through. Sounds like a motor issue. It's always good to check if the motor cable underneath the rear chain stay is loosen or not.

  • @marcborras4337
    @marcborras4337 Год назад

    Try looking at the yellow wire on lcd see if it loose [ I had the yellow wire ripped from lcd meter ].

  • @southwick4141
    @southwick4141 2 года назад

    Will you be making a range extender for the cheetah ebike to give you more range and so you don't have to open the gas tank to take out the battery to take it in the house to charge

  • @valtoval6605
    @valtoval6605 Год назад +1

    i have error 09, when i disconnect the motor cable, it changes to error 07. what could be the cause?

    • @alapt2209
      @alapt2209 3 месяца назад

      Same did you figure it out? I’m having the same issue:/

    • @valtoval6605
      @valtoval6605 3 месяца назад

      @@alapt2209 yes, please contact your supplier and order a replacement controller

    • @simonokungbowa5289
      @simonokungbowa5289 Месяц назад

      Same with mine, what could be the reason

    • @alapt2209
      @alapt2209 Месяц назад

      @@simonokungbowa5289 in my case it was the controller

    • @simonokungbowa5289
      @simonokungbowa5289 Месяц назад

      Just the controlla?

  • @southwick4141
    @southwick4141 2 года назад +1

    When I turn the power on my cheetah it come on in power mode if I go in settings and pick normal and save it then turn the bike off. Then turn it back on it come on in power mode if I want to change power mode I have to go to settings to change mode I can't just hit the on button to change mode

    • @revibikes
      @revibikes  2 года назад +2

      Hi Phil, the hit power button to change between ECO/NORMAL/POWER is a new feature that will be vastly applied after May 2022. For previous version, you need to go to setting to switch the mode.

    • @southwick4141
      @southwick4141 2 года назад +1

      Ok thanks you will you be making a range extender for the cheetah or a switch to hookup a second cheetah battery so you don't have to take off the gas tank to change battery I love this bike had it for one month

  • @johnraj786
    @johnraj786 2 года назад +1

    Wher to buy???

    • @revibikes
      @revibikes  2 года назад

      www.revibikes.com Learn more from our official online store.

    • @johnraj786
      @johnraj786 2 года назад

      @@revibikes u have any dealer in Dubai and India?

  • @shakingjam2766
    @shakingjam2766 2 года назад

    I have a tankx e bike and I rode down a curb and now I have no throttle or pedal assist

    • @revibikes
      @revibikes  2 года назад

      You can check the error code first, then trouble shoot one by one.

  • @raymondwade2689
    @raymondwade2689 2 года назад

    I have a cheetah brand new it won’t charge

    • @revibikes
      @revibikes  2 года назад +1

      Hi Raymond, sorry to hear that. Don't hesitate to contact info@revibikes.com. We'll walk you thru to get a new charger or diagnose if it's the battery issue.

  • @vadimryabinin334
    @vadimryabinin334 2 года назад

    Thanks