Some pointers - make sure both arrow buttons are pushed at the same time: There should be nothing on the display changing etc otherwise you're pushing one button or the other. You have to set the time first, every time, before you switch. And you won't know it worked until you hit the power button, showing Celsius in the upper right corner. Hopefully one day USA will stop getting fooled by commercial interests and switch to metric. Good luck!
I had tons of trouble with doing this. I believe the reset buttons are designed very poorly. My advice is to try doing this many times. It took me 15 attempts before it worked.
Does NOT work for me. I tried about 20 times with different remotes and after reset it keeps showing the Fahrenheit. My remotes are exactly the same as in the video.
What if it doesn't accomplish it? It worked before but doesn't work anymore with new batteries. After it resets and I switch it back on, it still shows Fahrenheit. Is there any other trick?
Hear me out guys and future me next time I change the batteries on this freaking stupid remote and end up on this video! Here's the real way of doing this every single time: 1. Press Clock twice (so it stops flashing) 2. Press/Hold Up/Down temp arrows 3. Press Reset -----> but here's the trick KEEP HOLDING THE FREAKING ARROWS PRESSED!! 4. Release Reset and wait for the clock flashing again 5. Power on, set your clock and enjoy! Hope this helps and reduces further frustrations!
Thank you so much. You are the example that the internet can be a real and useful community :)
Your comments are the VERY BEST. Works like a charm. Thank you.
Thank-you, Thank-you, Thank-you, Thank-you :) Cheers from Canada.
moved to a new place and this worked like a charm
Make sure you have released the reset pin first before releasing the two fingers from the up and down arrow buttons.
Some pointers - make sure both arrow buttons are pushed at the same time: There should be nothing on the display changing etc otherwise you're pushing one button or the other. You have to set the time first, every time, before you switch. And you won't know it worked until you hit the power button, showing Celsius in the upper right corner. Hopefully one day USA will stop getting fooled by commercial interests and switch to metric. Good luck!
Perfect! Thanks
I've been trying all day, it won't work 😭
Thank you, that seemed to be what was the missing piece for me to reset to C :)
THANK YOU!!!
Worked on 2024-06-21 with model MSZ-GL18NA.
Thank you!
I had tons of trouble with doing this. I believe the reset buttons are designed very poorly. My advice is to try doing this many times. It took me 15 attempts before it worked.
Does NOT work for me. I tried about 20 times with different remotes and after reset it keeps showing the Fahrenheit. My remotes are exactly the same as in the video.
Same thing for me :(
Now I am facing the same issue.
You have to release the reset pin first before the releasing your two fingers from the up and down arrow buttons.
What if it doesn't accomplish it? It worked before but doesn't work anymore with new batteries. After it resets and I switch it back on, it still shows Fahrenheit. Is there any other trick?
Thanks Bro, nice video 👌🏼
Cheers from Guatemala
Just got my untit installed this week. The remote won’t change from F ro C. Do tou think it’s busted?
Thanks.
Now you fixed it ??
Hear me out guys and future me next time I change the batteries on this freaking stupid remote and end up on this video! Here's the real way of doing this every single time:
1. Press Clock twice (so it stops flashing)
2. Press/Hold Up/Down temp arrows
3. Press Reset -----> but here's the trick KEEP HOLDING THE FREAKING ARROWS PRESSED!!
4. Release Reset and wait for the clock flashing again
5. Power on, set your clock and enjoy!
Hope this helps and reduces further frustrations!
You saved my life, thank you!! 😄
What is your remote controller model? I am facing the same issue (cannot set from F to C).
thank you so much
This is magic.
Any idea about the backlight ? Mine remote doesn't seems to have it ... please help
so simple, but i didn't know how to do it. thanks a lot :-)
Works, good video, thanks!
Thank you!!!
Thanks it really works 😍
THANK YOU SO MUCH
Started by saying short, win. Super concise 👍
Can you narrate all the silly stuff? 😜
Thanks a lot! :)
i have the exact same remote and tried 20 or so times before just giving up. quite the intuitive, user friendly design there mitsubishi 🙄
Hi can help me. why does mine not display celsius or fahrenheit when using auto mode?
It is auto COOL or DRY with 25C (+-) presetting.
Temp changing is not available on AUTO mode.
Here's why you guys are not getting it. In the step when you
press up down ( hold it for few seconds) now push reset while depressing the up down .
Funny my unit controller automatically displays Celsius, and tried doing this to switch to Fahrenheit, but doesn’t work
Mine displayed Fahrenheit and I had to switch to Celsius. Worked like a charm.
life saver
A1
Thank you!
Thank you!