Я поставил такой же двигатель на мотороллер муравей который весит 260 кг. Третий год катаюсь по выходным на рыбалку по 5 километров. Можно погрузить лодку пвх и лодочный мотор. Хорошие двигатели с достаточным ресурсом.
насчет ресурса и ремонта пригодности двигателя я бы поспорил ,также как и колеса на родных дисках из за несоблюдение размеров вырывание соска при проворачивание покрышки на ободе -частое явления .
Вот Молодец , однозначно !!! Как задумал - так и сделал ! А если желание или необходимость возникнет , то всегда сможет доработать и усовершенствовать свое детище !!! Так держать !!!
Эту конструкцию надо ещё дорабатывать и дорабатывать. Нет амортизации, нет механизма натяжения цепи (цепь имеет свойство вытягиваться). Это только то, что успел заметить, а там ещё куча проблем.
tako treba ovaj mladić je budućnost mile Hrvatske trebamo njegovati našu mladež i omogućiti budućim naraštajima ugodan život u Hrvatskoj i kršćanski život a ti si primjer toga ljubi te tvoj deda Dragan
Dude I have ran over myself twice on a 4wheeler bc my leg slipped off the peg and went under the tire. I was a kid both times I learned my lesson. And both times it’s rode my calf for 20-30 feet before just pulling me off
I can't believe it only took you 8 minutes to build this cool scooter. Might as well fix you a seat on it so you can sit down a while. That way you can sit or stand.
По полям по лесам синий трактор едит к вам !😅🙃 Я думал где он постоянно находит запчасти такие нужные ? 🤔 А в этом видео увидел одну из его старых самоделок . Это он сам чтото изобретает а потом выбрасывает, а потом находит стоб переделать. 🤣🤣🤣
You can give me all the materials, tools and equipment to make this and I would never be able to. Yet a 15 yr old can. It’s amazing what people could do.
I think those of you that are complaining about shocks are missing the point of the video it was to show you the frame work of a build from start to finish im sure he has the ability to do so but wanted to keep cost down for sale of video.
As for all of the comments about your riding gear, Karen sure posts under a lot of screen names. Your machine is great, and would be just the ticket for running up and down my half mile gravel driveway. With HF selling those engines for $99 at times, you would think that a company could produce what you built, and sell them for less than $500.
Я поставил такой же двигатель на мотороллер муравей который весит 260 кг. Третий год катаюсь по выходным на рыбалку по 5 километров. Можно погрузить лодку пвх и лодочный мотор. Хорошие двигатели с достаточным ресурсом.
В че за модель двигателя
@@PLOTOMATX лончин
насчет ресурса и ремонта пригодности двигателя я бы поспорил ,также как и колеса на родных дисках из за несоблюдение размеров вырывание соска при проворачивание покрышки на ободе -частое явления .
С чего сцепление?
@@Veles-m3h коробка и сцепление от муравья.
Вот Молодец , однозначно !!! Как задумал - так и сделал ! А если желание или необходимость возникнет , то всегда сможет доработать и усовершенствовать свое детище !!! Так держать !!!
Только непонятно как он тормозит без сцепления
@@rigger_rope_access_welder6999 На двигателе стоит центробежное сцепление , как на бензопилах.
@@rigger_rope_access_welder6999 Газ сбросил и на тормоз!Сцепление,как у бензопилы,центробежное!
Tote Goat, without baggage 👍
Right from my mind. "Tote goat" w/big tires , maybe put a bike seat pole that's got the spring in it and there's your suspension!
bravo sine, svaka cast.. dobar posao.. tatin ponos....
You nailed the gearing. That thing has a good gearing ratio.
Make sure you checkout my newest video with this gearing and engine :)
Скажите модель двигателя
What a great job on that nice scooter, adding a sit would be lovely 😮
not gonna lie this looks hella fun what an awesome and simple build
Задумка хорошая, только я бы двигатель изолировал от колеса, крыло нужно поставить чтобы грязь не попадала на него.
I wish I still had my scratch built minibike from years ago. Nicely done!
Эту конструкцию надо ещё дорабатывать и дорабатывать. Нет амортизации, нет механизма натяжения цепи (цепь имеет свойство вытягиваться). Это только то, что успел заметить, а там ещё куча проблем.
Огонь дружище самодельщик!жму руку!
Very well done.
Looks like a ton of fun!!
Задумка хорошая, но в конструкции больше минусов чем плюсов. А конструктору респект 👍
нормальный аппарат 😉
Без амортов только. А так норм...
Никаких минусов , одни плюсы !!! А диванным критикам - фак !
@@Slava-jh8wn4lb4i я о том же, самокат задумывался как вполне легкий и проходимый шустрый аппарат. Не надо из самоката мотоцикл делать)
Very nice. Wish I was young again. *Well done.*
Amazing work can only imagine what you will create in future videos be safe have fun
Came out with flip flops! LMAO
tako treba ovaj mladić je budućnost mile Hrvatske trebamo njegovati našu mladež i omogućiti budućim naraštajima ugodan život u Hrvatskoj i kršćanski život a ti si primjer toga ljubi te tvoj deda Dragan
Waited for this video longer than my dad to come back home with milk...
Is he back yet?
Hahahahhaha
Odlican projekt Mr Imbus ...🎉🎉🎉
Simplicity is all! Nice build.
Ficou o meu sonho show 👏👏👏
This is brilliant.
It looks really good fun, but would also be a great transpirt idea for developing countries, with simple, replaceable parts.
Amazing 👍👍👍👍
idemo bratee
I love the tires!
Отличный аппарат 👍
Looks incredible
Now that’s on another level with simple ways specially for off roads pretty good
0:05 The tree of giving. It gives cool stuffs.
Good ii boss 👍👍😊😊😍😍
Во как. Это надо, на каждую ногу, по такой машинке 😂🤗. Вместо роликов. (шутка). Ну а вообще, молодец 👍👍💫💪😊.
Pretty Kool get around machine!!!!
very well done ,,, looks like a giggle to ride too.
Good work! You are the faculty👏
Хороший проект,восхитительно,сделай сиденья и получиться идеальный мото
покрышки дубовые.амортов нет ..только стоя ездить.
Пока стоишь права не нужны
Allsome work guys from cruzermans inventions 😄👍🥳😸🎉🏆
Bud. Put some boots on. That rear tire will tear up your legs and feet while it tries to climb your leg.
. . . thank you ! ! ! Absolutely!
Or a mudguard
Dude I have ran over myself twice on a 4wheeler bc my leg slipped off the peg and went under the tire. I was a kid both times I learned my lesson. And both times it’s rode my calf for 20-30 feet before just pulling me off
Engine is blocking the tire
ⁿ
Nice job. Simply to build.👍👍👍
So simple that over 95% of people can't do it
You have the tire tread going the wrong way , the tire is mounted backwards ... Other than that is an amazingly good job 👍👍👍
Perfect!!! Ilon Mask out!)))))
It simple for to build it, and after that I like it!
Esse projeto pode ser melhorado colocar amortecedores ou então banco com molas, e nas rodas paralamas . Do mais ótima ideia e ótimo projeto parabéns .
True
Сиденьку надо мягкую поставить и будет езда с комфортом, а так нагрузка на ноги большая идёт!
На нём нету амортизаторов. На табуретке с колёсиками не комфортно будет сидеть. 🤭
Этот аппарат так и задумывался изначально - для молодых и здоровых адреналиновые покатушки по полям и буеракам !!!
Thanks for sharing
My friends
Хорошо вышло👍но без 2 подвеса ноги устанут и тело как после отбойника будет чуствовать,резина жесткая?
Теперь тоже захотелось собрать
Love this design
Good 🎉
Nice build man!
Thing looks awesome
ควรทำที่นั่งให้มีสปริงนิดหน่อย เหมือนกับใต้เบาะจักรยาน จะได้สบายมากขึ้น
I can't believe it only took you 8 minutes to build this cool scooter. Might as well fix you a seat on it so you can sit down a while. That way you can sit or stand.
Clearly the whole process took hours
По полям по лесам синий трактор едит к вам !😅🙃 Я думал где он постоянно находит запчасти такие нужные ? 🤔 А в этом видео увидел одну из его старых самоделок . Это он сам чтото изобретает а потом выбрасывает, а потом находит стоб переделать. 🤣🤣🤣
Show beleza 👍👍👍
Nice!
Great build!
Wooow amazing 👍❤️
You can give me all the materials, tools and equipment to make this and I would never be able to. Yet a 15 yr old can. It’s amazing what people could do.
Хорошо получилось,но звезда должна быть заменяемой,и подвеска не момешала бы.
Good Work
Muito bacana, parabéns pelo empenho e capricho na execução do projeto
пойду посмотрю под деревом где-то у меня завалялась там рама от мотоцикла😂
Nice construction!! What is the gear ratio, maybe 4:1? And what about top speed?) Thanks you!
Excellent 👌 bravo
I think those of you that are complaining about shocks are missing the point of the video it was to show you the frame work of a build from start to finish im sure he has the ability to do so but wanted to keep cost down for sale of video.
Chế xe chế quá đỉnh 😘
Уважуха😊
Красавчик!
Be nice with some street tires. Mite make one. Good video
Nice 🎉
Rear fender is needed to protect the engine, and rider, and proper riding gear is a necessity.
Impressed.
I think I definitely would have built it with shocks, & a seat
bagus &keren👍
❤super❤❤❤❤❤
As for all of the comments about your riding gear, Karen sure posts under a lot of screen names.
Your machine is great, and would be just the ticket for running up and down my half mile gravel driveway.
With HF selling those engines for $99 at times, you would think that a company could produce what you built, and sell them for less than $500.
They could. But they won't. Too small a market
Супер.Привет из России
Very nice!💪🏻😎
So sick
❤Good❤❤❤❤❤❤
That's awesome
Very cool
Very nice👍
How much degres up hil he can goes with your weight? Exelent and simple project !
ноги ломать на этой ступе 👍👍
Идея хорошая, реализация на 3ку. Кости не выдержат и километра без подвески😊
Как в ну погоди потом когда слезешь🤣🤣🤣
Имею ДВС "крот"культиватора, думаю сделать данный девайс 👍👍👍
Top show parabéns pelo seu trabalho 👏👏👏💖🇧🇷🇧🇷🇧🇷🇧🇷🇨🇮
nice dirt roads
Good work Mister.
ماشاء الله تبارك الرحمان الرحيم
What do you call those stuff that you connect in the engine that have sprocket too??
Good morning ❤❤😮😮😮🙏🙏👌👌
Больше всего мне понравилось токарный станок. Скажите пожалуйста это самодельный??
Bravo 👍
Mantap bro😊
Молодец! Good!!!!!
Mantap
👍👍
Привет а сколько км/ч бегает?