Twenty years ago, there were many such workshops and factories in Chinese villages and towns. Later, some of them were eliminated. Some have introduced more advanced CNC machine tools and made professional accessories! Admire these workers.
I'm not sure how fast these pumps will be running but I noticed areas that were and weren't machined on the impeller. That's going to make it unbalanced and will wear on the bearings and efficiency.
However the price of these pumps are just a fraction of the branded pumps. Moreover the repair shops too don't have modern tools. So it's. OK as long as the farmer is able to reap a decent harvest. Jai hind.
@@btrswt35 yes, as you can see the cast iron pulleys are connected to an oil engine with a long flat belt. Mostly the engined run at 1500 rpm, and the water is mostly drawn from irrigation canals. Although I am from India, from the dress of the workers it seems they are from Pakistan. However we share similar technology. ; - )....
Estupendo video sobre el sorprendente talento, de estos hombres para fabricar bombas de agua en fábrica, mis respetos y bendiciones desde Venezuela.💯💯💯💯👍👍👍👍👍🙏🙏🙏🙏💯💯
Wenn Sie die Pumpe herstellen. Können Sie sicherlich ein paar Arbeitstisch machen um sauber zu arbeiten und auch wird Ihre Rücken schonen. Wünsche viel Erfolg.
Realmente admiro Estas personas por estos inventos. Se ve rustico el prosceso pero vale la pena para el desempeño de estas bombas de agua saludes desde El Salvador Centro America
these are Pakistani workers they can do wonders if provide right training & tools ... we only need a leader who understand & build economy around these hard working guys .. ..
I wonder how long these pumps function? With all the grit, dust, bearings not packed, etc. And once “cleanliness is not next to GODliness in this manufacturers facility.
Amazing, thing has any more finish than needed. Ive tried transferring holes like this and they never line up! I wonder why they painted the inside of the pipes red?
Good job but performance quality might not be good because they are installing rotors with out balancing, which is technically a very big mistake. They must improve their quality. I can help them if they like.
bearings installation is not right - this way you probably lost 70% of their life Mold cleaning is very bad, balancing propeller not right. As a cheap product for farmers ok, but for some serious work - not ok.
It's owner's fault bro they are making alot but they pays very less amount to these workers.the owner should provides them all safety gears and make their factory on professionl basis
Simple end suction centri agri belt drive pump. No need knowing pump curve or noise criteria or will it last a month or a day. If it doesnt turn with a bajaj motor engine, maybe a isuzu v10 will do the trick... no doubt.. it will pump water.. like it or not.. 🤭🤭🤭
Piece work operation, the pump could fit together better and be much more reliable and easier to repair if the workers frankly were better workmen, or if the boss/owner allowed them to be.
Com tão pouco fazem muito, imagina esse povo com acesso a ferramentas descentes e tecnologia o que fariam? Vejo alguns vídeos de gente zombando das produções indianas, mais eu quero ver fazer o que fazem com o que tem na mão.
Talento desses senhores, infelizmente num ambiente insalubre com a mínima condição de trabalho muitos comum nesse pais conserteza alguém está ganhando muito com esse sub trabalho.
Ye factor kha per hai kya koi apne liye 1 pics bhi le shakte hai mai kishan hu. Mujhe single pcs required hai 5×4 or agar 6×4 mai mil jaye to bhut acha pls any contacts pls share
Safety glasses And earplugs and masks are very necessary. What about the way they carry the pump? It is heavy while continuing in the same way. It will cause problems in the back, and hearing hammer strikes and loud sounds will lose hearing with time, and smells in this closed place cause damage. Please communicate this to the director of the factory from It is possible that they are not aware of these damages and it causes them to have chronic disabilities, may God allow them to make a living
Mashallah, well done, Alhamdulillah. Seriously? Are you kidding? The owner of this factory is a disgusting person who has no investment in this place. Number of shortcuts (jugars) used in making this pump is absolutely disgusting. Used non lubricated bearings with dust, used bolts, gaskets from recycled paper, all the machinery is picked up from scrap and the list goes on. Until the mindset of customers, factory owners and policy makers change, this will carry on.
@@mykelbaurle5758 That's bullshit if the guys got a factory he surely can afford a few planks of wood to make a table.They may be poor but not poor enough to make a work table.Kneeling down on the ground can't be that productive and all the dust and dirt getting into parts and bearings being assembled is not good.To me it appears to be more of a culturel way of working.Working harder not smarter.
@@mehmettemel8725 agree with you. In Pakistan they all work on the ground, it's about their culture. Modern people in europe and asia and america only work at a bench/table in a much more ergonomical way to increase productivity and we care for our health more than they do.
I think this pump will last for many years. At the drive pulley end it has a ball bearing that can be kept properly lubricated and can if necessary be replaced at very low cost. At the pump rotor end it has a sleeve bearing that is lubricated by the water being pumped, and there is a stuffing box that can be adjusted to prevent leakage along the shaft without causing much friction. What is there to go wrong?
They should be given good working conditions. But these workshops which are many should be provided electricity free, like China. I need such pump which can work with three phase 10 hp motor. The canal where it would be installed has a head of only 6 fts.The three phase connection is available.
@@zafaradeel2107 😂😂😂 Secret manufacturing facility, We have 5 axis/6 axis automatic Machining Centers at ISRO, Some arrogant pakistani Shared this Video as if they are making some cutting edge Tech.
Mate things is wear every thing related safety if you didn't know anything you get hurt they are master they know if they doing wrong than get hurt our people doing hard work God bless all
Посадка произвелась молотком +/- две десятки роли не сыграли. Молотком по подшипнику, без использования оправок. После трёх ударов подшипник стал на "20лет старше".
السلام علیکم بھائی صاحب ہم کو پانچ جمع پانچ والا پنکھا چاہیے اور ادھر پانی والا ہمارے پاس ساڑھے سات ایچ پی کی موٹر ہے اس کو لگانے کے لیے اپ کے پاس مل جائے گا
the chinese must love seeing this accurate, very economic and incredibly safe production... i am sure they also give a 5 year warranty on each one as well....
There Is Always Something For Learning In These Videos.
Best Content . Keep It Up
EV the
Sir apna contact den ye pump ham ny mangwana hai.....bwn punjab pakistan
@gupshuptuktuk9022 😅
Address ky h Kahan se milga pump
Twenty years ago, there were many such workshops and factories in Chinese villages and towns. Later, some of them were eliminated. Some have introduced more advanced CNC machine tools and made professional accessories! Admire these workers.
Tt
Now China is dumping their cheap products into the world and stealing ordinary people's livelihood.
Same here, there a bigger shops with cnc lathes and machining centers and modern testing instruments too, but there are a lot these smaller shops too.
Today's bigger companies started like this like 20 or more years ago.
Just shows what you can achieve with basic machine tools and good castings. Well done gentlemen !!
Squatting in the dirt like primitive neanderthals instead of using work benches and proper tools...
No micrometers, no dial test indicators, no DRO, no CNC, no SOP and no ISO and it works!
I'm not sure how fast these pumps will be running but I noticed areas that were and weren't machined on the impeller. That's going to make it unbalanced and will wear on the bearings and efficiency.
Well as long at its not pumping at high revs should be OK
However the price of these pumps are just a fraction of the branded pumps. Moreover the repair shops too don't have modern tools. So it's. OK as long as the farmer is able to reap a decent harvest.
Jai hind.
@@Babaa51 is that what they are used for, farming?
@@btrswt35 yes, as you can see the cast iron pulleys are connected to an oil engine with a long flat belt. Mostly the engined run at 1500 rpm, and the water is mostly drawn from irrigation canals. Although I am from India, from the dress of the workers it seems they are from Pakistan. However we share similar technology. ; - )....
@@Babaa51 Cool thanks
Yeah..looks like a pump of a kind..looking good with that paint job from faraway too...
Estupendo video sobre el sorprendente talento, de estos hombres para fabricar bombas de agua en fábrica, mis respetos y bendiciones desde Venezuela.💯💯💯💯👍👍👍👍👍🙏🙏🙏🙏💯💯
Wenn Sie die Pumpe herstellen. Können Sie sicherlich ein paar Arbeitstisch machen um sauber zu arbeiten und auch wird Ihre Rücken schonen. Wünsche viel Erfolg.
Die sind nur Sklaven bestimmt bei einem korrupten Politiker, die die ausnutzt.
olum turkce yazsana
@@ilhankaygsz996 A. ... gönder bana Türkçe öğretsin.
Parabéns 👏👏👏 .... ótimo trabalho
ماشاء الله تبارك الله ...اللهم صل وسلم وبارك على نبينا محمد وعلى اله وصحبه..
These are talented people of pakistan...
Realmente admiro Estas personas por estos inventos. Se ve rustico el prosceso pero vale la pena para el desempeño de estas bombas de agua saludes desde El Salvador Centro America
these are Pakistani workers they can do wonders if provide right training & tools ... we only need a leader who understand & build economy around these hard working guys .. ..
Very very hard work.be carefully sir, because your family dipende your good health, God bless you always,❤️❤️❤️❤️❤️🙏🙏
Buen video en qué país es saludos desde sn fco totimehucan puebla México
Nice demonstration of how "good enough" is good enough.
I wonder how long these pumps function? With all the grit, dust, bearings not packed, etc. And once “cleanliness is not next to GODliness in this manufacturers facility.
Haha, they painted all that dust onto it later.
I bet those bearings fail all the time. Amazing to watch none the less.
i wonder the next video is making jet engine or rocket engine.
Amazing, thing has any more finish than needed. Ive tried transferring holes like this and they never line up! I wonder why they painted the inside of the pipes red?
Хопен агенсоо майстора този ок
Really hard work and amazing to see them working traditionally in a small workshop. 🇮🇳🇮🇳
Look Nice, only, adding a seal ring and leaf spring will be much better.
Masha Allah..! khan ji...All people good work...Alhamdulillah..! super...♥
good job. congratulatios from spain
Good job but performance quality might not be good because they are installing rotors with out balancing, which is technically a very big mistake. They must improve their quality. I can help them if they like.
vocês estão de parabéns. Fazer tudo isto .com perfeição. O governo deveria da medalha de onra .
bearings installation is not right - this way you probably lost 70% of their life
Mold cleaning is very bad, balancing propeller not right. As a cheap product for farmers ok, but for some serious work - not ok.
This very rustic process
absulutly disgraceful
No safety no work bench
worst working conditions
poor work practices
I am pretty sure all the employs are under paid
It's owner's fault bro they are making alot but they pays very less amount to these workers.the owner should provides them all safety gears and make their factory on professionl basis
Barely paid
Страшно представить что они начнут вытворять, если узнают про ЧПУ.
We know this CNC machine is expensive
@@عطورالجنان 😂😂😂
Great job. Better to use jigs & fixtures for drilling etc.
Exactly, It will not be that expensive to make
Great video ! 👍
All is simple machine but good hand work.
Thats 4th Industrial Era my friends.
Of course my friend... take a look to be more sure about that: ruclips.net/video/KFziEl_GW18/видео.html
@@johnts2252 Γιανναρα αυτο ειναι ακομη καλυτερο...:)))))))))
@@Deathunder 😆 👍🏻
Bahi pump kon c company ka acha hy 7 6 ka lena hy
Simple end suction centri agri belt drive pump. No need knowing pump curve or noise criteria or will it last a month or a day. If it doesnt turn with a bajaj motor engine, maybe a isuzu v10 will do the trick... no doubt.. it will pump water.. like it or not.. 🤭🤭🤭
lo que mas les admiro es el nivel de seguridad industrial que usan....y que trabajan con las uñas pero hacen cosas muy funcionales.
Ye pump kha par bana rhe pls provide adress sir ji
Piece work operation, the pump could fit together better and be much more reliable and easier to repair if the workers frankly were better workmen, or if the boss/owner allowed them to be.
Also, work benches would be a nice touch...
Com tão pouco fazem muito, imagina esse povo com acesso a ferramentas descentes e tecnologia o que fariam? Vejo alguns vídeos de gente zombando das produções indianas, mais eu quero ver fazer o que fazem com o que tem na mão.
Ye kahan pe hai or 4by4 ka pankha kitne ka milega please tell me
Address bata do 5=5 ka water pump ban vana h
सर जी एक कहां है बे आपकी फैक्ट्री और आम लोगों को या हम आना चाहे आपके शॉप तक तो पता क्या है जगह बताइए सर जी
Talento desses senhores, infelizmente num ambiente insalubre com a mínima condição de trabalho muitos comum nesse pais conserteza alguém está ganhando muito com esse sub trabalho.
Me interesa comprar en Chile Sudamérica
6/7 how much bro
Ye factor kha per hai kya koi apne liye 1 pics bhi le shakte hai mai kishan hu. Mujhe single pcs required hai 5×4 or agar 6×4 mai mil jaye to bhut acha pls any contacts pls share
Pues para los materiales que tienen hacen maravillas, pero y la seguridad?
👏👍👋🇲🇽
Did i miss the Bearings getting any kind of Grease?
They were using old bearings what I have noticed
It didn't show any greasing but he did have a pot of grease next to him so I assume they use it.
@@alexbeedie6940 Assumption can mean "did or did not"
@@johnpartridge7623 And is also the mother of all major fuck-ups.
@@janvisser2223 Your right there mate.
Safety glasses And earplugs and masks are very necessary. What about the way they carry the pump? It is heavy while continuing in the same way. It will cause problems in the back, and hearing hammer strikes and loud sounds will lose hearing with time, and smells in this closed place cause damage. Please communicate this to the director of the factory from It is possible that they are not aware of these damages and it causes them to have chronic disabilities, may God allow them to make a living
Wow so professional 😂😂😂😂🤣
Belt driven pumps?
Mashallah, well done, Alhamdulillah. Seriously? Are you kidding?
The owner of this factory is a disgusting person who has no investment in this place. Number of shortcuts (jugars) used in making this pump is absolutely disgusting. Used non lubricated bearings with dust, used bolts, gaskets from recycled paper, all the machinery is picked up from scrap and the list goes on. Until the mindset of customers, factory owners and policy makers change, this will carry on.
The best place to manufacture and painting is dirty sand and dust.
The dirt and metal chips gives the paint a nice texture.
bearings in the dirt, thats a good idea
When will wood tables be realised in India patch? And floors?
Wood for tables and floors cost money, the ground is free, it never rots or needs replaced.
This isn't india, it's pakistan.
this is pakistan clip.
india has more modern fecilities.
@@mykelbaurle5758 That's bullshit if the guys got a factory he surely can afford a few planks of wood to make a table.They may be poor but not poor enough to make a work table.Kneeling down on the ground can't be that productive and all the dust and dirt getting into parts and bearings being assembled is not good.To me it appears to be more of a culturel way of working.Working harder not smarter.
@@mehmettemel8725 agree with you. In Pakistan they all work on the ground, it's about their culture. Modern people in europe and asia and america only work at a bench/table in a much more ergonomical way to increase productivity and we care for our health more than they do.
I suspect that these pumps were very old one like they run on pulleys ...very slow and would consume high energy
Porque esta gente no trabaja en mejores condiciones, mesas, cintas transportadoras , digo no ?
It s good but sir inka address to batya nahi contains to banana inka
Good job you guys 🙏🙏💪💪
Great job, thanks for sharing
ऐसे जुगाड़ तो इंडिया पाकिस्तान में ही होता हैं सब काम mannual ।
Kahan hai iski factory kripya bataen
Maybe, some day, someone will invent a "work table"!
That what i was thinking about, i watching in pain seeing them working on the ground without using tables!!.
Or a concrete floor, at least
Kaha hai ye factory
Ye product humko chahiye ye humko kaise mil payega
Which city.....
Very smart, don't need it supply from China, haha
In which city of Pakistan....???
I need address to visit
Very nice job. Hard work involved...
Where is this factory
Assalamu alaikum sar humne ek Lena tha kya hamen yah mil sakta hai aur kahan se milega s ki price kya hai location Bata de
aisa wal ak motour kharidna chahta hu kha se kharidu please bataiye na
Ye kaha banata hai bata digiye please
The level of ingenuity here is amazing, but I wouldn't expect that pump to last long.
I think this pump will last for many years. At the drive pulley end it has a ball bearing that can be kept properly lubricated and can if necessary be replaced at very low cost. At the pump rotor end it has a sleeve bearing that is lubricated by the water being pumped, and there is a stuffing box that can be adjusted to prevent leakage along the shaft without causing much friction. What is there to go wrong?
Someday Indians will discover our most secret technology... the work bench
parabens voces sao verdadeiros artesoes.
5/5 ke Kya ret he 12.50 inch pankha ke
सर मुझे इस पंखे की जरूरत है
I think they need someone, who tells them to not always work on the ground anymore, because it's easier. Why don't they recognize that themselves?
They should be given good working conditions. But these workshops which are many should be provided electricity free, like China. I need such pump which can work with three phase 10 hp motor. The canal where it would be installed has a head of only 6 fts.The three phase connection is available.
La linea de montaje limpita que calidad mi cuate
Extraordinary talent of Pakistani people....
they build water pumps but they can`t have enough workbenches or wear boots, someone there is getting so rich investing so few
Don't bother to balance the impeller :-)
Who cares! ! !God mit uns ! ! !
Actually these pumps designed and manufactured for cryogenic engines! ! ! We are very lucky to see this secret manufacturing facility.
balanced? It is good for 20,000 rpm.
@@zafaradeel2107 😂😂😂 Secret manufacturing facility, We have 5 axis/6 axis automatic Machining Centers at ISRO, Some arrogant pakistani Shared this Video as if they are making some cutting edge Tech.
Accident first before safety.no safety shoes,ears,dust mask,eyes googles etc.✌👍🤗
It's all about survival, what might kill you over there is bigger than occupational hazards
Mate things is wear every thing related safety if you didn't know anything you get hurt they are master they know if they doing wrong than get hurt our people doing hard work God bless all
Agar iski jaga permanent magnate dynamo banaenge yo 200 % zyada income ayega
Fazendo mais com menos,manufatura 4.0
Great skills hand ✋✋ made
Unos genios!!.saludos.
RO del Uruguay.
Жаль не показали как посадку под подшипники точили, по калибру или нутромеру?
Чё??? Вы это кому??
Я стал уважать слесарей из нашего жека теперь мы точно не последние
Посадка произвелась молотком +/- две десятки роли не сыграли. Молотком по подшипнику, без использования оправок. После трёх ударов подшипник стал на "20лет старше".
@@a..513 так и было) а подшипник и так по виду не молодой был))
@@НиколайКрымский-б1л да лет 30 ему не меньше
@@АндрейЕремин-щ8ц если советский - еще столько же прослужит))
السلام علیکم بھائی صاحب ہم کو پانچ جمع پانچ والا پنکھا چاہیے اور ادھر پانی والا ہمارے پاس ساڑھے سات ایچ پی کی موٹر ہے اس کو لگانے کے لیے اپ کے پاس مل جائے گا
Where is it???
Nice work
Do you do all the casting as well?
I’d say so, as it’s shocking
Дак и что в итоге то вышло? Я вижу вытяжку? или что там? маховик? или под ремень привод? Я что то не догнал, честно не догоняю..
барабан это под плоский ремень зачем то покрасили
Ну где верстаки, стеллажи, всё сидя на полу??????????
Так за еду работают и думают как бы ещё три жены чтобы за водой ходили
А станок его наверное английский довоенный
भाई यह पंखा ओल्लाईन मिलेगा तो कितने का मिलेगा
the chinese must love seeing this accurate, very economic and incredibly safe production... i am sure they also give a 5 year warranty on each one as well....
😂
How is this surprising or a talent? This man Is obviously a craftsman
Why is all the work done on an earthen floor?
What’s the warranty? 5 minutes if your lucky 🥴
Good job
trabalhar com as luva demonstra maior profissionalismo além de servir para proteger as mão seu maior patrimônio, seu bem mais precioso>