@kalessaradan 4) The LED strips have a power cord that connects to the strip, and ends with a hot/neutral wire. You just need to solder these to the appropriate places in the circuit diagram. Part 3 will have a diagram showing the exact placement of in the circuit of the batteries, switches, etc. and where the soldering will occur.
The 12v batteries are in the original battery compartment, after you have completely dremeled the battery compartment open. You have to dremel almost everything out, but be careful not to mess up the slots that the battery door hooks into. The AAA are too long to go into that compartment.
@ArtasYan What exactly do you mean, longer lighting? We sell these modified discs on our website for $125, however if you need a blue one, you would need to supply your own disc, as we don't have them in stock anymore since they discontinued the toys. You can find them on Amazon or eBay.
Unfortunately that is one of the reasons that we are unable to offer these for sale any longer. After they discontinued the toys, they skyrocketed in price. I suggest just checking eBay every so often and hope you get a good deal on it.
@AerialZero1 Replying for everyone's information. 1) I used 5 mm wire from ELWirePros. They make a smaller diameter in extra bright, but the larger diameter regular wire glows just as bright as the smaller diameter extra bright. 2) Just posted those in the description and in a post up above. 3) The EL Wire ends with a quick connect attachment, as does the inverter. The inverter has a quick connect on one end and two wires on the other end (hot and neutral). The LED strip has two wires.
I bought 2 lengths of the 1 foot LED strips, cgi.ebay.com/ebaymotors/LED-STRIP-30CM-BRIGHT-EFFICIENCY-REPTILE-LIGHT-12V-BLUE-_W0QQcmdZViewItemQQhashZitem1e5c71c56aQQitemZ130399978858QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories. These particular ones come in 1 foot strips and have little connectors to increase their length. Just make sure to electrical tape the connector so you never have to worry about it coming apart while posing and moving. Will get part 2 posted soon.
@AerialZero1 A23 are what I use. Did you try connecting the wires to both ends of the batteries. The wires aren't labelled + or -, so you might have them connected to the wrong ends. In the past I had a faulty connector in one of the sections one time. But only once. I would try connecting each 1 ft strip to the 12 volt independently. You may be able to figure out if one of them is faulty. But honestly I can't help. Electronics can be buggy, but I have been able to test these in the past.
@BigDaddy6270 Sorry, I was actually tired myself by the end of narrating it. Lol. It required so many takes, that I lost my enthusiasm of recording my voice. Oftentimes when speaking the narration, I would run over into the next step, and have to hit delete and start over again.
The place that I originally purchased it from seems to no longer offer it. But this item looks similar, www.amazon.com/XT-AUTO-Flexible-Waterproof-Decoration/dp/B014V4RMCE?ref_=fsclp_pl_dp_3
hey, do you possibly know of any place that still sells the stock discs? for less than $60 that is. I am really interested in doing this for a project for my major but can not find the disc within my price range. thanks.
What length is the led strip? I'm on ebay right now, there are lots of lengths to choose from, don't know if you can cut the strip to size or not so I'd rather just buy the right size to start with.Just bought two Tron disks, one to modify, and one to keep original, and just in case I screw up on the one I'm modding, got another one to start over lol. :)
Hi Paul, im writing from from Mexico. I am waiting for my disc which I intend to modify eventually, but because it could happen that I don't find the exact same components you used in these video, would you sell to me the the whole components set to modify my disc to red color??? Thanks
I do have the red 12V LED strips. For the EL Wire, I only have an orange, not a red tube. But it looks like their website is still active. You will want to purchase the Red EL Wire directly from them. Here is what I do have on hand that I can sell. Defintely have: 12V red LED strip EL Wire invertor with quick connect attachment May have: 12V battery holder AAA battery holders (either 2 singles or 1 double)
You should be able to order one of those when ordering the EL Wire. But I can sell you this one at a discount since I don't have many of the components to make these any longer.
![GUILTY GEAR -STRIVE- Season Pass 4 Playable Character #1 [Queen Dizzy] Trailer](http://i.ytimg.com/vi/nXDsAgYXXv4/mqdefault.jpg)
@kalessaradan
4) The LED strips have a power cord that connects to the strip, and ends with a hot/neutral wire. You just need to solder these to the appropriate places in the circuit diagram. Part 3 will have a diagram showing the exact placement of in the circuit of the batteries, switches, etc. and where the soldering will occur.
The inverter is from coolight.com, it is under the 1.5-3 V inverters section. It is the CL-IPTC-3v-3-7FT. Thanks!
The 12v batteries are in the original battery compartment, after you have completely dremeled the battery compartment open. You have to dremel almost everything out, but be careful not to mess up the slots that the battery door hooks into.
The AAA are too long to go into that compartment.
That particular seller is quick, ships from the US, and has great customer service. formula-j87
@ArtasYan What exactly do you mean, longer lighting? We sell these modified discs on our website for $125, however if you need a blue one, you would need to supply your own disc, as we don't have them in stock anymore since they discontinued the toys. You can find them on Amazon or eBay.
Unfortunately that is one of the reasons that we are unable to offer these for sale any longer. After they discontinued the toys, they skyrocketed in price. I suggest just checking eBay every so often and hope you get a good deal on it.
Zachary bengerman Halpern
Go to ebay, click on advanced, click items by seller and put his user id in. Hope that helped
@AerialZero1 Replying for everyone's information.
1) I used 5 mm wire from ELWirePros. They make a smaller diameter in extra bright, but the larger diameter regular wire glows just as bright as the smaller diameter extra bright.
2) Just posted those in the description and in a post up above.
3) The EL Wire ends with a quick connect attachment, as does the inverter. The inverter has a quick connect on one end and two wires on the other end (hot and neutral). The LED strip has two wires.
I bought 2 lengths of the 1 foot LED strips, cgi.ebay.com/ebaymotors/LED-STRIP-30CM-BRIGHT-EFFICIENCY-REPTILE-LIGHT-12V-BLUE-_W0QQcmdZViewItemQQhashZitem1e5c71c56aQQitemZ130399978858QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories. These particular ones come in 1 foot strips and have little connectors to increase their length. Just make sure to electrical tape the connector so you never have to worry about it coming apart while posing and moving.
Will get part 2 posted soon.
awesome
Super!
@AerialZero1 A23 are what I use. Did you try connecting the wires to both ends of the batteries. The wires aren't labelled + or -, so you might have them connected to the wrong ends. In the past I had a faulty connector in one of the sections one time. But only once. I would try connecting each 1 ft strip to the 12 volt independently. You may be able to figure out if one of them is faulty. But honestly I can't help. Electronics can be buggy, but I have been able to test these in the past.
@BigDaddy6270 Sorry, I was actually tired myself by the end of narrating it. Lol. It required so many takes, that I lost my enthusiasm of recording my voice. Oftentimes when speaking the narration, I would run over into the next step, and have to hit delete and start over again.
I am planning to make a tron rinzler disc that can split
Could you provide a link to the specific LED strips please? Thank you!
The place that I originally purchased it from seems to no longer offer it. But this item looks similar, www.amazon.com/XT-AUTO-Flexible-Waterproof-Decoration/dp/B014V4RMCE?ref_=fsclp_pl_dp_3
what kind of 12v LED strip (can you show the link to the 12v strip)
hey, do you possibly know of any place that still sells the stock discs? for less than $60 that is. I am really interested in doing this for a project for my major but can not find the disc within my price range. thanks.
What length is the led strip? I'm on ebay right now, there are lots of lengths to choose from, don't know if you can cut the strip to size or not so I'd rather just buy the right size to start with.Just bought two Tron disks, one to modify, and one to keep original, and just in case I screw up on the one I'm modding, got another one to start over lol. :)
hey how do I find formula-j87 on ebay I cant find him
I wish that I was an engineer...
how much mm for the elwire
make a cyclops visor
Hi Paul, im writing from from Mexico. I am waiting for my disc which I intend to modify eventually, but because it could happen that I don't find the exact same components you used in these video, would you sell to me the the whole components set to modify my disc to red color???
Thanks
I am not sure if I have any more components in stock. But I can check and let you know.
I do have the red 12V LED strips. For the EL Wire, I only have an orange, not a red tube. But it looks like their website is still active. You will want to purchase the Red EL Wire directly from them. Here is what I do have on hand that I can sell.
Defintely have:
12V red LED strip
EL Wire invertor with quick connect attachment
May have:
12V battery holder
AAA battery holders (either 2 singles or 1 double)
ok let me check here first. The 3V inverter is one of the things i might have difficulties with
You should be able to order one of those when ordering the EL Wire. But I can sell you this one at a discount since I don't have many of the components to make these any longer.