Siemens NX 2007 What's New - when a useful function becomes super useful - Create Group Enhancement

👉👉👉 SUBSCRIBE for more content:
/ @bizlearn_siemens_nx_t...
👉👉👉 NX 2007 Update training required for large groups or even single sets? We are ready to enroll you into the best Online Learning Platform available: the Bizlearn Online Campus 🤓 Contact us via [e-mail] or visit
www.bizlearn.de/en/nx-continu...
for more information!
👉👉👉 The ultimate NX CAD Secrets Training:
www.bizlearn.de/en/portfolio-...
NX 2007 was released in December 2021 and we have delivered suitable and very unique update trainings to more than 16,000 participants in 8 languages already (-:
The video shows an excerpt of the Bizlearn NX Update Training portfolio.
🤓 ALL of our NX update and beginner trainings are spiced with NX CAD secrets and practical workflows! We do not just deliver a video-documentary! The Bizlearn training is a storytelling experience and allows you to connect with one of the most experienced and successful CAD trainers on the globe. Our passion is training and entertainment. And we love to communicate with our participants 😍.
NX 2007 was released in December 2021 and within the release week we have already finished the complete video training (-;
The video shows a review of “What’s New Siemens NX 2007”. I am going to explain some general sketch creation and modification workflows and introduce the NX 2007 New Group enhancement! Also, some problems which have occurred since the release have been solved and will be demonstrated within this video.
Video Content:
In Siemens NX 2007 the good old Group has been enhanced and now allows the usage of selection rules. Thereby, the selection is associative and updated automatically after modifications. Beside some other possible use cases, a color can be applied to geometry in an associative manner.
OUR TIP: If you are not using the latest major release of Siemens NX, you can also apply a color in an associative manner by using Synchronous' Group Face and "Assign Feature Color"!
We have decided to start a new tutorial series just concerning the new Sketch Solver. Thereby we are going to introduce workarounds / solutions to help you understanding the new solver and using it properly. The target is always, to reach better results than before the new solver release!
Is it fair to compare the new vs the old sketch solver by demonstrating the same workflows?
How old are your Sketch workflows and methods?
Changing a workflow requires some effort, but in my opinion is worth it. Because the advantages of the new solver then become advantages for us personally!
It always feels uncomfortable to become comfortable :-P
Thank you, Siemens, for developing the NX software into the right direction!
For German, French, Chinese or English update training participation, please don’t hesitate to get in contact with us: [e-mail]
The update training is already available, starting from version NX11 if you wish (-;
By the way - we offer a Siemens NX online training concerning modeling methods. Just get in contact (;
#siemensnx #nx1980 #nxtutorial
Further information can be obtained via [e-mail]
Impressum: www.bizlearn.de/impressum/
Background music composed by Aleksandr Shamaluev | © MotionElements Pte. Ltd.

[@Bizlearn_Siemens_NX_Training]

👉👉👉What do you think about this enhancement?
👉👉👉Were you familiar with the Synchronous Group Face and are you using it?
👉👉👉Let us know in the comments below 🤘🤘🤘 And have a nice day!

[@greenspirit1083]

Another helpful video which will make daily work more comfortable. Thank you! Recently I noticed your video about group faces which is a big improvement in comparison to assign feature colour to e.g. an extrude feature. Hopefully I will remember this functionality when our company will have updated from NX1980 to NX2007.

[@Bizlearn_Siemens_NX_Training]

Thank you for the comment🙃 don't you have update trainings beside the major rollouts?

[@greenspirit1083]

@@Bizlearn_Siemens_NX_Training I think my answer won't be of interest for the whole world, so I am going to switch to our mother tongue. ;-)
Es werden in einer Schnellbleiche die "wesentlichen" neuen Highlights als Powerpointpräsentation vorgestellt. Der Trainer ist selbst nicht NX-Anwender und pickt ein paar Dinge heraus, die ihm nützlich erscheinen. Die kleinen Hilfen, die die tägliche Arbeit erleichtern und auch Begeisterung bringen, fallen meistens durchs Netz. Strukturiertes Arbeiten und auch deine Basics wie "immer ältestes Objekt selektieren" wurden nie angesprochen. Wir sind keine kleine Butze, sondern ein Großunternehmen - von daher besonders traurig. Wenn wir Dich als Trainer engagieren könnten, wäre das ein großer Gewinn. ;-)

[@Bizlearn_Siemens_NX_Training]

@@greenspirit1083 so richtig wundern tut mich das jetzt nicht ;-) wir schulen einige Großkonzerne weltweit mittlerweile online über unsere Lernplattformen mit wachsendem Erfolg. Du kannst mich gerne dazu konsultieren, falls für euch Alternativen in Betracht gezogen werden können: [e-mail]

[@advanceddigitalizationengi2875]

Good video

[@gaganaut06]

Can you please do series on assembly modelling in nx and also sketching in context of the assembly

[@Bizlearn_Siemens_NX_Training]

Those standard topics are available via our training platforms for sale.

[@caddesigntech9635]

Thanks for this Video, I'm a Tool designer , Please I need to know How to make Symbole (C'bor , Deep, hole Tap, hole callout) in hole table like solidworks , our machining team does not understand this designation on the table,

[@stephanelouvet1113]

Hello. Thank you for the demo.
I wonder to know if from this group, we can (with associativity) remove some specific faces.
On our model at work, we have sometimes heavily ribbed plastic bodies. On those ribs we have to apply small blends (tips & roots).
Manual selection is tedious, I used already the "feature intersection edges" as smart selection and helped a lot but It's not enough.
I was thinking if there is a way to create "dynamic selection groups".
1 - select a region as a start.
2 - remove some face's edges
3 - add some other.
4 - use this selection to apply blend on.
Thank you.

[@Bizlearn_Siemens_NX_Training]

Hi Stephane, deselection is possible as I've described in my latest upload. Does this new video answer your question?

[@stephanelouvet1113]

@@Bizlearn_Siemens_NX_Training yes. I saw it, thank you. I’m using more and more the Smart Selection tools. It really makes a big big difference in model resilience and regeneration time after changes. The way I think my features as also evolved in the goal to blend the « feature intersections edges » (I’m working on plastic injected parts where ribs are added later in the design, perfect there 👍🏼)

[@matteopini79]

Non ho mai lavorato con software meno intuitivo e con un interfaccia peggiore di NX. A volte sarebbe necessario copiare dai migliori almeno per poter raggiungere un livello di decenza minimo. Poi col tempo si va a personalizzare, ma ad oggi NX ha troppi limiti per la progettazione meccanica.

[@traipang5090]

Hi Simon, can I talk to you?

[@Bizlearn_Siemens_NX_Training]

Hi Traipang, for business matters you can contact me via email: [e-mail]

[@traipang5090]

@@Bizlearn_Siemens_NX_Training ok I will send you e-mail