This is why I love your channel so much. You truly show us how real things can get without sugar coating it. Thanks for all you do cause your healing a lot of people by making the mistakes for us.
We all need that. It’s not right that we are only shown perfection after the struggle. the struggle is the most important part. That’s where all the knowledge is. I got a call from Ricoma. They responded to my voicemail I left yesterday. Got the printer working and it was my fault m. I had corrupted the file by taking out the flash drive. User error, update video coming tomorrow. Ooops. 😂😂😂🤣🤣🤣🤣. 😐😐😐😐 sorry Ricoh. My fault.
Someone just donated this model printer to the church I go to (and work at) and I have no idea how to work this thing. I’m just getting started on your videos and I can tell that you are going to save me so many headaches. Thank you sir, your doing the Lords work 🙏
So good to see you posting real life ups and downs, we all make mistakes and errors that's how we learn and the good part is we all are learning as well. Thanks for your videos they are great. Glad you got it sorted.
I got it to work. It is amazing. I’m doing an update video today. It was user error. I corrupted the file. It’s printing amazing now. Thanks so much for that testimony. I appreciate it. It’s really reassuring.
@@adubbproductions I wish you the absolute best in your new adventure. Your work is amazing with your other adventures and I have no doubt you’ll master this before long as well.
Oh my. Your thumbnail pic had me worried. Glad I read the comments. Can’t wait for the next video. Thank you so much for sharing your experiences. It is greatly appreciated.
I've watched alot of people get higher on here but I will say a few ladies who started out with 1 machine and then start getting bigger machines 3 and 4 kinda turn into braggers....its like haha I got this....thats when I move on....you however haven't got that way....your excitement is heart warming to me because you found the deals on your stuff and work hard to get it....you show the good bad and ugly while working....some never show the ut ohs....lol...stay real!
OMG you’re so on point bro. People do wanna see you do good until you start doing good I’m going through that now and I’ve been printing for over 20 years I have zero employees it’s crazy but I love what I do. Ricoh was Anajet and that company didn’t do well either with their DTG printers. Ricoh has been bought out again by another company. But yeah I own a brother GTX love it but the white ink cost 💲 😩. Great video keep up the great videos
Thanks! You just saved me from spending $4500 or more on a DTG printer. Looks good but the cost per shirt for supplies etc would kill me. i"m sure you get the biz to cover it.
no problem. But, it was my fault. Spoke to tech support this morning. I had corrupted the file. Everything is printing perfectly now. User error. It was totally my fault. I love this thing.
This machine is definitely going to be a game changer financially for you once you get using it down and the error message figured out. You will get there!
Hi Allan, I pray it’s just a defected cartridge. I do not have a DTG machine but that’s what it sounds like to me. I’m supposed to be receiving my DTF machine this weekend so wish me luck. Your neighbor from New Jersey in the Garden State. 🍎🫐🍓🍏 Keeping you in prayer🙏🏽
I wish you the best of luck. I’m sure things will go fine for you. I don’t think it’s a defective cartridge because I opened a new cartridge and the machine stopped and gave me the same error at the same exact location. I even tried a different image. Almost to the end and same thing. Thank you for watching Maxine. 🙏🏾 best of luck with your dtf printer. I might be getting one of those at this point. 🤣🤣🤣🤣
You are so right but you have to keep going. Negative comment will come no matter what you do, so don't let it change personal or YT life. I found you and you actually answered a question about sublimation. I like the way you produce very clear explained videos. Step away go do research and come back and maybe you will find some out why it keep doing that.
I deal with 3-D printers and it has the same issues check the black ink cartridge RF ID reader many times that is dirty or damaged clean it with alcohol. Also if that fails if you have another black ink cartridges plugged in that will isolate the issue could be either the cartridge itself is bad or something in the reading mechanism of the machine is not working correctly
Thank you Jennifer. I really appreciate it. I got it working now though. It was something I did wrong. I corrupted my file. Tech support helped me this morning. Its printing like magic now.
With colorgate you have to quit the program before you save to the usb, otherwise it’ll just loop it back into colorgate. Rip, save to file, Quit colorgate , save to usb, eject and then dtg machine.
Yea. It’s great. Makes everything so easy. Guess what though. I got it working this morning. It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
I am thinking about getting the Ricoh 2000DTG printer. I went to Miami and visited the warehouse got a demo and a tour. They test each machine before shipping. They did a demo on their DTG machines and a 10 and 15 needle embroidery machine for me. What do you think about your experience? Do you recommend their equipment?
i had a 6ft Roland printer for Vinyl cutter/ printer. Man its awesome but maintenance on it when you are not using it. You always have to have it plugged in so it circulates the ink for you.
Yea, the daily maintenance is a task to deal with but so far for me it’s not that bad. I actually won’t mind it at all once I get it to work. But right now I’m doing daily maintenance on a printer that won’t print all the way thre……. Got a call mid type. Guess what. It’s working now.
The Wagner is gonna give you headaches and take some time to master, but even then it won't be completely repeatable. When it comes machine time, what do you plan to get??
have you tried to contact ricoh company and find out if theirs anything they kan help you with even though you bought it from offer up. maybe your pin connectors are damaged inside / where you insert the ink at
I put it a trouble call and left a voicemail with Ricoma yesterday. They called me this morning. It was my fault. I had corrupted the file. Everything is printing fine now .
Can you give us a tutorial of anarip how to use it and get good prints. Also how to connect it the printer to the software or even flash driver how you did here
I don’t use anarip. I use colorgate. I have a tutorial on how to use colorgate. When I first started I downloaded anarip and used it a few times but I didn’t like the interface compared to colorgate so I started using colorgate and I’ve never looked back. I’ll dig into it and figure it out and shoot a video for you. In the meantime here is a video showing how to use colorgate. ruclips.net/video/MI0EJEFk588/видео.html
Hey, take your time & breath. lol. Although this is not the brand DTG printer I have or woulda went with, for every person that has a bad experience with the Ricoh there's tons more that have complete success. I'd see what all tech support they'd be able to offer & just see if you can find another RUclipsr, who prints....with your same Ricoh & pick his/her brain to troubleshoot. Cause.....That's what I did! It was still a great deal...You got this!
You are absolutely right. Tech support contacted me this morning. It was my fault. I corrupted the file. It’s working like magic now. I’m just sitting on the couch in disbelief of the possibility and opportunity I have right now. My mind is blown. This is like a money printer for real.
Got it figured out. It’s perfect now. It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
@@adubbproductions Definitely you'll figure it out see the positive side of it, You already got it on the harder part the rest is easy just technical stuff But what you offered it was great the Machine is not You!🌟🌟🌟🌟🌟🙏🏼👍🏻
Thanls for this video. I like Congratulations again on your new equipment. You always kept it real with us this is why God will continue to bless you and your family. How do you like the printer so far?
I was pulling for you because the printer cost was a steal if it works properly. I'm not a fan of Anajet or Ricoh. I had a DTG printer from them that I struggled to keep alive for years. If you need someone to repair it I can suggest someone who will get it back up and running. I'm still watch the video and hope it's going to work but now you know why the $500 didn't matter.
If it freezes again, lift the lid and it may only required a gentle tap/nudge on the ink carriage in the direction it needs to go to get it to continue with the current print. Also gently wipe off the encoder strip. This may help. Don't shake the cartridges so hard. You can dislodge something or create a lot of air bubbles.
It wasn’t the black cartridge. I had put in another brand new cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
Smh. It’s cool. We gonna get this thing to work right. This is a money box. That issue though. It’s not me. High possibility that it could be a manufacture thing it’s not the cartridge either because I opened up and put in a new black ink cartridge. Idk. This is frustrating though.
@@adubbproductions it’s probably the insert slot for the black color has some issue, perhaps it needs cleaning or something? Definitely a bummer when the first run doesn’t go smoothly but I’m sure you’ll get the hang of it
That sounds like something worth trying. So on the inside where the black goes clean that part out? I’m gonna try it but still. I’ve printed 2 different designs twice and they both stoped at the same exact point almost to the end of the print. It’s worth a try though. Thank you I’m gonna try it.
It’s fixed. Wasn’t the board or the sensor or any of the other parts they sent me. To this day I’m not sure what Ricoh did to fix it but it’s been working flawless. It was still under warrantee so I didn’t have to pay anything. Super lucky.
If I were you, I would send it back, especially at that price?? You can't run a business with a brand new printer on the blink! I would replace the black ink cartridge in the middle of where it stopped and see if it happens again?
This printer is a bitch. It likes to be at 68-75 degrees fahrenheit to operate properly. Please get your room humidity up above 40% to make sure ur white print heads stay in good working condition!
I spent $40,000 with this company, and I don't recommend it to anyone, don't believe anything about their products, it's the worst business they can do in their lives, please don't buy their products, they have terrible service.
You gotta give more context than that? What happened with your machines? I have a different perspective. All my machines have more than payed for themselves. What happened on your end? Please share. Make a video. Show and tell.
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
This is why I love your channel so much. You truly show us how real things can get without sugar coating it. Thanks for all you do cause your healing a lot of people by making the mistakes for us.
We all need that. It’s not right that we are only shown perfection after the struggle. the struggle is the most important part. That’s where all the knowledge is.
I got a call from Ricoma. They responded to my voicemail I left yesterday. Got the printer working and it was my fault m. I had corrupted the file by taking out the flash drive. User error, update video coming tomorrow. Ooops. 😂😂😂🤣🤣🤣🤣. 😐😐😐😐 sorry Ricoh. My fault.
Someone just donated this model printer to the church I go to (and work at) and I have no idea how to work this thing. I’m just getting started on your videos and I can tell that you are going to save me so many headaches. Thank you sir, your doing the Lords work 🙏
So good to see you posting real life ups and downs, we all make mistakes and errors that's how we learn and the good part is we all are learning as well. Thanks for your videos they are great. Glad you got it sorted.
I’ve had this same machine for 2 1/2 years. They can be tricky but are really amazing once you master it.
I got it to work. It is amazing. I’m doing an update video today. It was user error. I corrupted the file. It’s printing amazing now. Thanks so much for that testimony. I appreciate it. It’s really reassuring.
@@adubbproductions I wish you the absolute best in your new adventure. Your work is amazing with your other adventures and I have no doubt you’ll master this before long as well.
Everyone keep mentioning a dehumidifier or a humidifier? What do you recommend? Do you use one?
Oh my. Your thumbnail pic had me worried. Glad I read the comments. Can’t wait for the next video. Thank you so much for sharing your experiences. It is greatly appreciated.
I've watched alot of people get higher on here but I will say a few ladies who started out with 1 machine and then start getting bigger machines 3 and 4 kinda turn into braggers....its like haha I got this....thats when I move on....you however haven't got that way....your excitement is heart warming to me because you found the deals on your stuff and work hard to get it....you show the good bad and ugly while working....some never show the ut ohs....lol...stay real!
OMG you’re so on point bro. People do wanna see you do good until you start doing good I’m going through that now and I’ve been printing for over 20 years I have zero employees it’s crazy but I love what I do. Ricoh was Anajet and that company didn’t do well either with their DTG printers. Ricoh has been bought out again by another company. But yeah I own a brother GTX love it but the white ink cost 💲 😩. Great video keep up the great videos
Thank you. I appreciate it. Yea that gtx ink is the most expensive. Keep printing bro.
Contact Ricoma, while warranty is not transferable, you always have service with their machines. Keep pushing. Your success makes me push harder. 💪
How about i had corrupted the file. It’s working perfectly now. Update video tomorrow. I’m hype, hype.
Thanks! You just saved me from spending $4500 or more on a DTG printer. Looks good but the cost per shirt for supplies etc would kill me. i"m sure you get the biz to cover it.
no problem. But, it was my fault. Spoke to tech support this morning. I had corrupted the file. Everything is printing perfectly now. User error. It was totally my fault. I love this thing.
This machine is definitely going to be a game changer financially for you once you get using it down and the error message figured out. You will get there!
Figured it out. It was my fault. I corrupted the file. It’s working perfect now. Update video coming tomorrow.
It’s been a minute since I’ve checked in. Glad to see you! Hope the ink cartridge gets sorted!!!
Hi Allan, I pray it’s just a defected cartridge. I do not have a DTG machine but that’s what it sounds like to me.
I’m supposed to be receiving my DTF machine this weekend so wish me luck.
Your neighbor from New Jersey in the Garden State. 🍎🫐🍓🍏
Keeping you in prayer🙏🏽
I wish you the best of luck. I’m sure things will go fine for you. I don’t think it’s a defective cartridge because I opened a new cartridge and the machine stopped and gave me the same error at the same exact location. I even tried a different image. Almost to the end and same thing. Thank you for watching Maxine. 🙏🏾 best of luck with your dtf printer. I might be getting one of those at this point. 🤣🤣🤣🤣
You are so right but you have to keep going. Negative comment will come no matter what you do, so don't let it change personal or YT life. I found you and you actually answered a question about sublimation. I like the way you produce very clear explained videos. Step away go do research and come back and maybe you will find some out why it keep doing that.
Hey my friend. I meant to get back to you sooner but I have been feeling under the weather.
Awesome upgrade!!! I had to subscribe to support you King!!!
I deal with 3-D printers and it has the same issues check the black ink cartridge RF ID reader many times that is dirty or damaged clean it with alcohol. Also if that fails if you have another black ink cartridges plugged in that will isolate the issue could be either the cartridge itself is bad or something in the reading mechanism of the machine is not working correctly
Hey Allan, I am sorry you having problems, wishing you the best out of it ,🙏💯
Thank you Jennifer. I really appreciate it. I got it working now though. It was something I did wrong. I corrupted my file. Tech support helped me this morning. Its printing like magic now.
With colorgate you have to quit the program before you save to the usb, otherwise it’ll just loop it back into colorgate.
Rip, save to file, Quit colorgate , save to usb, eject and then dtg machine.
Thank you for the advice Adrian, I appreciate it.
Can't wait to see part 3 lol
Try a new black cartridge to see if it’s an issue with the cartridge. Or try a new design to see if it’s a problem with that.
It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
I like that your machines are on wheels. I need a similar set up
Yea. It’s great. Makes everything so easy. Guess what though. I got it working this morning. It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
@@adubbproductions video soon.? Waiting
I am thinking about getting the Ricoh 2000DTG printer. I went to Miami and visited the warehouse got a demo and a tour. They test each machine before shipping. They did a demo on their DTG machines and a 10 and 15 needle embroidery machine for me. What do you think about your experience? Do you recommend their equipment?
i had a 6ft Roland printer for Vinyl cutter/ printer. Man its awesome but maintenance on it when you are not using it. You always have to have it plugged in so it circulates the ink for you.
Yea, the daily maintenance is a task to deal with but so far for me it’s not that bad. I actually won’t mind it at all once I get it to work. But right now I’m doing daily maintenance on a printer that won’t print all the way thre……. Got a call mid type. Guess what. It’s working now.
Allan maybe where the ink s were stores caused the inks to kind of went bad.
The Wagner is gonna give you headaches and take some time to master, but even then it won't be completely repeatable. When it comes machine time, what do you plan to get??
have you tried to contact ricoh company and find out if theirs anything they kan help you with even though you bought it from offer up. maybe your pin connectors are damaged inside / where you insert the ink at
I put it a trouble call and left a voicemail with Ricoma yesterday. They called me this morning. It was my fault. I had corrupted the file. Everything is printing fine now .
@@adubbproductions that’s great to hear, I got designs for you if you ever wanted to work together, as well In embroidery.
Can you give us a tutorial of anarip how to use it and get good prints. Also how to connect it the printer to the software or even flash driver how you did here
I don’t use anarip. I use colorgate. I have a tutorial on how to use colorgate. When I first started I downloaded anarip and used it a few times but I didn’t like the interface compared to colorgate so I started using colorgate and I’ve never looked back. I’ll dig into it and figure it out and shoot a video for you. In the meantime here is a video showing how to use colorgate.
ruclips.net/video/MI0EJEFk588/видео.html
@@adubbproductions please 🙏 I think I downloaded the driver correctly as well
KEEP YOUR HEAD UP BRO YOU WILL GET IT RIGHT YOUR ADUBB THIS WHAT YOU DO \\\GET IT DONE
Got it done bro. We good. It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
Hey, take your time & breath. lol. Although this is not the brand DTG printer I have or woulda went with, for every person that has a bad experience with the Ricoh there's tons more that have complete success. I'd see what all tech support they'd be able to offer & just see if you can find another RUclipsr, who prints....with your same Ricoh & pick his/her brain to troubleshoot. Cause.....That's what I did! It was still a great deal...You got this!
You are absolutely right. Tech support contacted me this morning. It was my fault. I corrupted the file. It’s working like magic now. I’m just sitting on the couch in disbelief of the possibility and opportunity I have right now. My mind is blown. This is like a money printer for real.
Hope you can figure it out. I was thinking of making that purchase
Got it figured out. It’s perfect now.
It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
Love the content as always
Love ya set up. Nice.
🙏🏾. Thank you l appreciate it.
Great Video Quality Tutorial wise insane
Hopefully the issue gets fixed 🙏🏼 👍🏻
I hope so to Fidel. We will see if I am able to figure it out. I’m sure I will but we will have to wait and see.
@@adubbproductions Definitely you'll figure it out see the positive side of it, You already got it on the harder part the rest is easy just technical stuff But what you offered it was great the Machine is not You!🌟🌟🌟🌟🌟🙏🏼👍🏻
Thought I had to pull up 💪🏾❤️
Thanls for this video. I like Congratulations again on your new equipment. You always kept it real with us this is why God will continue to bless you and your family. How do you like the printer so far?
Now that I got it figured out this morning. I am in love with it. I am actually speechless about it. Honestly. This thing is awesome.
@@adubbproductions Cant wait to see what you come up with
great video mate, hope it all works out for you 👍
I have problems with white ink Ricoh ri 2000 I think it is the problem you had how did you solve it if you can help me
Man all this is interesting but i bet frustrating at the same time🤔
I was pulling for you because the printer cost was a steal if it works properly. I'm not a fan of Anajet or Ricoh. I had a DTG printer from them that I struggled to keep alive for years. If you need someone to repair it I can suggest someone who will get it back up and running. I'm still watch the video and hope it's going to work but now you know why the $500 didn't matter.
You don't have to pretreat white shirts and when you print on white it doesn't need to lay a white underbase in order to print.
If it freezes again, lift the lid and it may only required a gentle tap/nudge on the ink carriage in the direction it needs to go to get it to continue with the current print. Also gently wipe off the encoder strip. This may help. Don't shake the cartridges so hard. You can dislodge something or create a lot of air bubbles.
Just subscribe to you fabulous channel I’m learning still but your very informative thank you Faye London uk 🇬🇧
Boom Boom just like that ✌
It wasn’t the black cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
What's the size of your flat top cart?
You been working out or what? Lol Na but how's the Ricoh treating you?
That problem was caused from a bad ink cartridge docking station on the one I used.
I had switched it out twice and it was still happening. They took it back and fixed it.
I would switch the black with another cartridge to see what happens.
I did that. Same thing happened. No worries though I have since rectified the issue. I’m currently waiting for a part.
I was really hoping that thumbnail didn’t mean the machine wasn’t working properly. Hopefully it’s a simple solution.
Bro change that cartridge and if the problem continues then it may be the black ink sensor of the printer itself.
It wasn’t the black cartridge. I had put in another brand new cartridge. I had corrupted the file. Everything is printing great now. Update video coming tomorrow.
@@adubbproductions oh nice to hear bro. Keep up the good work.
Thank you bro. I appreciate it. Thanks for tuning in.
Do they have ink subscription plans like regular printers?
No. I haven’t seen anything like that. They should consider it though. I would sign up real fast.
Perhaps the fix is not really hard, Ricoma may have a simple fix for this issue. I hopeful, that they do.
It wasn’t. Got it fixed. It was my fault. I corrupted the file. Totally my fault. Everything is printing great now.
I am told Ricoh printers are the best in the world. Have I been told wrong?
No. You haven’t. I corrupted my file. That was 100% my fault. Customer support called me and broke it down to me. Everything is working perfect now.
allways check your print q and your files are probably bad in the sd card try reformatting it again.
The upset face on the thumbnail says it all. Hope it works, I know you’ll make it work king 😤
Smh. It’s cool. We gonna get this thing to work right. This is a money box. That issue though. It’s not me. High possibility that it could be a manufacture thing it’s not the cartridge either because I opened up and put in a new black ink cartridge. Idk. This is frustrating though.
@@adubbproductions it’s probably the insert slot for the black color has some issue, perhaps it needs cleaning or something? Definitely a bummer when the first run doesn’t go smoothly but I’m sure you’ll get the hang of it
That sounds like something worth trying. So on the inside where the black goes clean that part out? I’m gonna try it but still. I’ve printed 2 different designs twice and they both stoped at the same exact point almost to the end of the print. It’s worth a try though. Thank you I’m gonna try it.
#cosign🤞🏿🤞🏿🤞🏿
Right. Lol
Chip on the ink cartridge issue
Hopefully it's not something that is costly to repair.
That's how I felt about cameo 4😒
Noooo. The cameo was easy.
You bought it from offerup
Cheap sensor issue probably if not board and that’s more $$
It’s fixed. Wasn’t the board or the sensor or any of the other parts they sent me. To this day I’m not sure what Ricoh did to fix it but it’s been working flawless. It was still under warrantee so I didn’t have to pay anything. Super lucky.
لااله الاالله محمد رسول الله
You think something wrong with the machine
If I were you, I would send it back, especially at that price?? You can't run a business with a brand new printer on the blink! I would replace the black ink cartridge in the middle of where it stopped and see if it happens again?
It was my fault. I had corrupted the file. Everything is working great now. This is awesome. Update video tomorrow.
@@adubbproductions These things happen, were are all human. That's good you got it working and that you are happy with it. Congrats on your new toy!
🙏🏾
This printer is a bitch. It likes to be at 68-75 degrees fahrenheit to operate properly. Please get your room humidity up above 40% to make sure ur white print heads stay in good working condition!
Yes it is. Lol. It’s a complaining., nagging, crying baby.
I will. I appreciate the advise. Thank you.
Smh for as much as you paid for that ma nine you should never have a problem..ya better call em smh
I spent $40,000 with this company, and I don't recommend it to anyone, don't believe anything about their products, it's the worst business they can do in their lives, please don't buy their products, they have terrible service.
You gotta give more context than that? What happened with your machines? I have a different perspective. All my machines have more than payed for themselves. What happened on your end? Please share. Make a video. Show and tell.